diff options
Diffstat (limited to 'SecurityPkg/Library/TpmCommLib/TisPc.c')
| -rw-r--r-- | SecurityPkg/Library/TpmCommLib/TisPc.c | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/SecurityPkg/Library/TpmCommLib/TisPc.c b/SecurityPkg/Library/TpmCommLib/TisPc.c new file mode 100644 index 0000000000..3d74a012df --- /dev/null +++ b/SecurityPkg/Library/TpmCommLib/TisPc.c @@ -0,0 +1,180 @@ +/** @file
+ Basic TIS (TPM Interface Specification) functions.
+
+Copyright (c) 2005 - 2011, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "CommonHeader.h"
+
+/**
+ Check whether TPM chip exist.
+
+ @param[in] TisReg Pointer to TIS register.
+
+ @retval TRUE TPM chip exists.
+ @retval FALSE TPM chip is not found.
+**/
+BOOLEAN
+TisPcPresenceCheck (
+ IN TIS_PC_REGISTERS_PTR TisReg
+ )
+{
+ UINT8 RegRead;
+
+ RegRead = MmioRead8 ((UINTN)&TisReg->Access);
+ return (BOOLEAN)(RegRead != (UINT8)-1);
+}
+
+/**
+ Check whether the value of a TPM chip register satisfies the input BIT setting.
+
+ @param[in] Register Address port of register to be checked.
+ @param[in] BitSet Check these data bits are set.
+ @param[in] BitClear Check these data bits are clear.
+ @param[in] TimeOut The max wait time (unit MicroSecond) when checking register.
+
+ @retval EFI_SUCCESS The register satisfies the check bit.
+ @retval EFI_TIMEOUT The register can't run into the expected status in time.
+**/
+EFI_STATUS
+EFIAPI
+TisPcWaitRegisterBits (
+ IN UINT8 *Register,
+ IN UINT8 BitSet,
+ IN UINT8 BitClear,
+ IN UINT32 TimeOut
+ )
+{
+ UINT8 RegRead;
+ UINT32 WaitTime;
+
+ for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30){
+ RegRead = MmioRead8 ((UINTN)Register);
+ if ((RegRead & BitSet) == BitSet && (RegRead & BitClear) == 0)
+ return EFI_SUCCESS;
+ MicroSecondDelay (30);
+ }
+ return EFI_TIMEOUT;
+}
+
+/**
+ Get BurstCount by reading the burstCount field of a TIS regiger
+ in the time of default TIS_TIMEOUT_D.
+
+ @param[in] TisReg Pointer to TIS register.
+ @param[out] BurstCount Pointer to a buffer to store the got BurstConut.
+
+ @retval EFI_SUCCESS Get BurstCount.
+ @retval EFI_INVALID_PARAMETER TisReg is NULL or BurstCount is NULL.
+ @retval EFI_TIMEOUT BurstCount can't be got in time.
+**/
+EFI_STATUS
+EFIAPI
+TisPcReadBurstCount (
+ IN TIS_PC_REGISTERS_PTR TisReg,
+ OUT UINT16 *BurstCount
+ )
+{
+ UINT32 WaitTime;
+ UINT8 DataByte0;
+ UINT8 DataByte1;
+
+ if (BurstCount == NULL || TisReg == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ WaitTime = 0;
+ do {
+ //
+ // TIS_PC_REGISTERS_PTR->burstCount is UINT16, but it is not 2bytes aligned,
+ // so it needs to use MmioRead8 to read two times
+ //
+ DataByte0 = MmioRead8 ((UINTN)&TisReg->BurstCount);
+ DataByte1 = MmioRead8 ((UINTN)&TisReg->BurstCount + 1);
+ *BurstCount = (UINT16)((DataByte1 << 8) + DataByte0);
+ if (*BurstCount != 0) {
+ return EFI_SUCCESS;
+ }
+ MicroSecondDelay (30);
+ WaitTime += 30;
+ } while (WaitTime < TIS_TIMEOUT_D);
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Set TPM chip to ready state by sending ready command TIS_PC_STS_READY
+ to Status Register in time.
+
+ @param[in] TisReg Pointer to TIS register.
+
+ @retval EFI_SUCCESS TPM chip enters into ready state.
+ @retval EFI_INVALID_PARAMETER TisReg is NULL.
+ @retval EFI_TIMEOUT TPM chip can't be set to ready state in time.
+**/
+EFI_STATUS
+EFIAPI
+TisPcPrepareCommand (
+ IN TIS_PC_REGISTERS_PTR TisReg
+ )
+{
+ EFI_STATUS Status;
+
+ if (TisReg == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_READY);
+ Status = TisPcWaitRegisterBits (
+ &TisReg->Status,
+ TIS_PC_STS_READY,
+ 0,
+ TIS_TIMEOUT_B
+ );
+ return Status;
+}
+
+/**
+ Get the control of TPM chip by sending requestUse command TIS_PC_ACC_RQUUSE
+ to ACCESS Register in the time of default TIS_TIMEOUT_D.
+
+ @param[in] TisReg Pointer to TIS register.
+
+ @retval EFI_SUCCESS Get the control of TPM chip.
+ @retval EFI_INVALID_PARAMETER TisReg is NULL.
+ @retval EFI_NOT_FOUND TPM chip doesn't exit.
+ @retval EFI_TIMEOUT Can't get the TPM control in time.
+**/
+EFI_STATUS
+EFIAPI
+TisPcRequestUseTpm (
+ IN TIS_PC_REGISTERS_PTR TisReg
+ )
+{
+ EFI_STATUS Status;
+
+ if (TisReg == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!TisPcPresenceCheck (TisReg)) {
+ return EFI_NOT_FOUND;
+ }
+
+ MmioWrite8((UINTN)&TisReg->Access, TIS_PC_ACC_RQUUSE);
+ Status = TisPcWaitRegisterBits (
+ &TisReg->Access,
+ (UINT8)(TIS_PC_ACC_ACTIVE |TIS_PC_VALID),
+ 0,
+ TIS_TIMEOUT_D
+ );
+ return Status;
+}
|