diff options
Diffstat (limited to 'ShellPkg')
-rw-r--r-- | ShellPkg/Application/Shell/Shell.c | 54 | ||||
-rw-r--r-- | ShellPkg/Application/Shell/Shell.h | 18 |
2 files changed, 36 insertions, 36 deletions
diff --git a/ShellPkg/Application/Shell/Shell.c b/ShellPkg/Application/Shell/Shell.c index 3061f8fcbc..153234974d 100644 --- a/ShellPkg/Application/Shell/Shell.c +++ b/ShellPkg/Application/Shell/Shell.c @@ -123,7 +123,7 @@ FindNextInstance( Temp = StrStr(SourceString, FindString);
//
- // If nothing found, or we dont care about escape characters
+ // If nothing found, or we don't care about escape characters
//
if (Temp == NULL || !CheckForEscapeCharacter) {
return (Temp);
@@ -143,7 +143,7 @@ FindNextInstance( }
/**
- Check whether the string between a pair of % is a valid envifronment variable name.
+ Check whether the string between a pair of % is a valid environment variable name.
@param[in] BeginPercent pointer to the first percent.
@param[in] EndPercent pointer to the last percent.
@@ -245,7 +245,7 @@ ContainsSplit( feature's enabled state was not known when the shell initially launched.
@retval EFI_SUCCESS The feature is enabled.
- @retval EFI_OUT_OF_RESOURCES There is not enough mnemory available.
+ @retval EFI_OUT_OF_RESOURCES There is not enough memory available.
**/
EFI_STATUS
EFIAPI
@@ -684,7 +684,7 @@ FreeResources: /**
Sets all the alias' that were registered with the ShellCommandLib library.
- @retval EFI_SUCCESS all init commands were run sucessfully.
+ @retval EFI_SUCCESS all init commands were run successfully.
**/
EFI_STATUS
EFIAPI
@@ -769,10 +769,10 @@ IsScriptOnlyCommand( loaded image protocol installed on it. The FilePath will point to the device path
for the file that was loaded.
- @param[in, out] DevPath On a sucessful return the device path to the loaded image.
- @param[in, out] FilePath On a sucessful return the device path to the file.
+ @param[in, out] DevPath On a successful return the device path to the loaded image.
+ @param[in, out] FilePath On a successful return the device path to the file.
- @retval EFI_SUCCESS The 2 device paths were sucessfully returned.
+ @retval EFI_SUCCESS The 2 device paths were successfully returned.
@retval other A error from gBS->HandleProtocol.
@sa HandleProtocol
@@ -979,7 +979,7 @@ ProcessCommandLine( ) == 0) {
ShellInfoObject.ShellInitSettings.BitUnion.Bits.Exit = TRUE;
} else if (StrnCmp (L"-", CurrentArg, 1) == 0) {
- // Unrecognised option
+ // Unrecognized option
ShellPrintHiiEx(-1, -1, NULL,
STRING_TOKEN (STR_GEN_PROBLEM),
ShellInfoObject.HiiHandle,
@@ -1167,7 +1167,7 @@ DoStartupScript( FileStringPath = ShellFindFilePath(mStartupScript);
if (FileStringPath == NULL) {
//
- // we return success since we dont need to have a startup script
+ // we return success since we don't need to have a startup script
//
Status = EFI_SUCCESS;
ASSERT(FileHandle == NULL);
@@ -1349,7 +1349,7 @@ StripUnreplacedEnvironmentVariables( SecondPercent = FirstPercent!=NULL?FindNextInstance(FirstPercent+1, L"%", TRUE):NULL;
if (FirstPercent == NULL || SecondPercent == NULL) {
//
- // If we ever dont have 2 % we are done.
+ // If we ever don't have 2 % we are done.
//
break;
}
@@ -1381,7 +1381,7 @@ StripUnreplacedEnvironmentVariables( //
CopyMem(FirstPercent, SecondPercent + 1, StrSize(SecondPercent + 1));
//
- // dont need to update the locator. both % characters are gone.
+ // don't need to update the locator. both % characters are gone.
//
} else {
CurrentLocator = SecondPercent + 1;
@@ -1401,7 +1401,7 @@ StripUnreplacedEnvironmentVariables( @param[in] OriginalCommandLine The original command line
- @retval NULL An error ocurred.
+ @retval NULL An error occurred.
@return The new command line with no environment variables present.
**/
CHAR16*
@@ -1442,7 +1442,7 @@ ShellConvertVariables ( ; Temp = StrStr(Temp+1, AliasListNode->Alias)
){
//
- // we need a preceeding and if there is space no ^ preceeding (if no space ignore)
+ // we need a preceding and if there is space no ^ preceding (if no space ignore)
//
if ((((Temp-OriginalCommandLine)>2) && *(Temp-2) != L'^') || ((Temp-OriginalCommandLine)<=2)) {
NewSize += StrSize(AliasListNode->CommandString);
@@ -1463,7 +1463,7 @@ ShellConvertVariables ( ; Temp = StrStr(Temp+1, MasterEnvList)
){
//
- // we need a preceeding and following % and if there is space no ^ preceeding (if no space ignore)
+ // we need a preceding and following % and if there is space no ^ preceding (if no space ignore)
//
if (*(Temp-1) == L'%' && *(Temp+StrLen(MasterEnvList)) == L'%' &&
((((Temp-OriginalCommandLine)>2) && *(Temp-2) != L'^') || ((Temp-OriginalCommandLine)<=2))) {
@@ -1505,7 +1505,7 @@ ShellConvertVariables ( }
//
- // Remove non-existant environment variables
+ // Remove non-existent environment variables
//
StripUnreplacedEnvironmentVariables(NewCommandLine1);
@@ -1902,7 +1902,7 @@ VerifySplit( @param[in] CmdLine pointer to the command line to process
@retval EFI_SUCCESS The operation was successful
- @return an error occured.
+ @return an error occurred.
**/
EFI_STATUS
EFIAPI
@@ -2058,7 +2058,7 @@ SetLastError( @retval EFI_SUCCESS The operation was successful
@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
- @return some other error occured
+ @return some other error occurred
**/
EFI_STATUS
EFIAPI
@@ -2103,7 +2103,7 @@ ProcessCommandLineToFinal( /**
Run an internal shell command.
- This API will upadate the shell's environment since these commands are libraries.
+ This API will update the shell's environment since these commands are libraries.
@param[in] CmdLine the command line to run.
@param[in] FirstParameter the first parameter on the command line
@@ -2181,13 +2181,13 @@ RunInternalCommand( }
//
- // This is guarenteed to be called after UpdateArgcArgv no matter what else happened.
+ // This is guaranteed to be called after UpdateArgcArgv no matter what else happened.
// This is safe even if the update API failed. In this case, it may be a no-op.
//
RestoreArgcArgv(ParamProtocol, &Argv, &Argc);
//
- // If a script is running and the command is not a scipt only command, then
+ // If a script is running and the command is not a script only command, then
// change return value to success so the script won't halt (unless aborted).
//
// Script only commands have to be able halt the script since the script will
@@ -2425,7 +2425,7 @@ RunCommand( // NULL out comments (leveraged from RunScriptFileHandle() ).
// The # character on a line is used to denote that all characters on the same line
// and to the right of the # are to be ignored by the shell.
- // Afterward, again remove spaces, in case any were between the last command-parameter and '#'.
+ // Afterwards, again remove spaces, in case any were between the last command-parameter and '#'.
//
for (TempWalker = CleanOriginal; TempWalker != NULL && *TempWalker != CHAR_NULL; TempWalker++) {
if (*TempWalker == L'^') {
@@ -2454,7 +2454,7 @@ RunCommand( }
//
- // We dont do normal processing with a split command line (output from one command input to another)
+ // We don't do normal processing with a split command line (output from one command input to another)
//
if (ContainsSplit(CleanOriginal)) {
Status = ProcessNewSplitCommandLine(CleanOriginal);
@@ -2505,7 +2505,7 @@ RunCommand( STATIC CONST UINT16 InvalidChars[] = {L'*', L'?', L'<', L'>', L'\\', L'/', L'\"', 0x0001, 0x0002};
/**
- Function determins if the CommandName COULD be a valid command. It does not determine whether
+ Function determines if the CommandName COULD be a valid command. It does not determine whether
this is a valid command. It only checks for invalid characters.
@param[in] CommandName The name to check
@@ -2541,7 +2541,7 @@ IsValidCommandName( @param[in] Handle The handle to the already opened file.
@param[in] Name The name of the script file.
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -2837,7 +2837,7 @@ RunScriptFileHandle ( @param[in] CmdLine the command line to run.
@param[in] ParamProtocol the shell parameters protocol pointer
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -2885,7 +2885,7 @@ RunScriptFile ( }
//
- // This is guarenteed to be called after UpdateArgcArgv no matter what else happened.
+ // This is guaranteed to be called after UpdateArgcArgv no matter what else happened.
// This is safe even if the update API failed. In this case, it may be a no-op.
//
RestoreArgcArgv(ParamProtocol, &Argv, &Argc);
@@ -2894,7 +2894,7 @@ RunScriptFile ( }
/**
- Return the pointer to the first occurance of any character from a list of characters.
+ Return the pointer to the first occurrence of any character from a list of characters.
@param[in] String the string to parse
@param[in] CharacterList the list of character to look for
diff --git a/ShellPkg/Application/Shell/Shell.h b/ShellPkg/Application/Shell/Shell.h index 51368f6ffa..4d804fc45b 100644 --- a/ShellPkg/Application/Shell/Shell.h +++ b/ShellPkg/Application/Shell/Shell.h @@ -139,7 +139,7 @@ typedef enum { @retval EFI_SUCCESS The operation was successful
@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
- @return some other error occured
+ @return some other error occurred
**/
EFI_STATUS
EFIAPI
@@ -161,7 +161,7 @@ SetLastError( /**
Sets all the alias' that were registered with the ShellCommandLib library.
- @retval EFI_SUCCESS all init commands were run sucessfully.
+ @retval EFI_SUCCESS all init commands were run successfully.
**/
EFI_STATUS
EFIAPI
@@ -175,10 +175,10 @@ SetBuiltInAlias( loaded image protocol installed on it. the FilePath will point to the device path
for the file that was loaded.
- @param[in, out] DevPath on a sucessful return the device path to the loaded image
- @param[in, out] FilePath on a sucessful return the device path to the file
+ @param[in, out] DevPath on a successful return the device path to the loaded image
+ @param[in, out] FilePath on a successful return the device path to the file
- @retval EFI_SUCCESS the 2 device paths were sucessfully returned.
+ @retval EFI_SUCCESS the 2 device paths were successfully returned.
@return other a error from gBS->HandleProtocol
@sa HandleProtocol
@@ -294,7 +294,7 @@ RunCommand( );
/**
- Function determins if the CommandName COULD be a valid command. It does not determine whether
+ Function determines if the CommandName COULD be a valid command. It does not determine whether
this is a valid command. It only checks for invalid characters.
@param[in] CommandName The name to check
@@ -314,7 +314,7 @@ IsValidCommandName( @param[in] Handle The handle to the already opened file.
@param[in] Name The name of the script file.
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -331,7 +331,7 @@ RunScriptFileHandle ( @param[in] CmdLine the command line to run.
@param[in] ParamProtocol the shell parameters protocol pointer
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -343,7 +343,7 @@ RunScriptFile ( );
/**
- Return the pointer to the first occurance of any character from a list of characters.
+ Return the pointer to the first occurrence of any character from a list of characters.
@param[in] String the string to parse
@param[in] CharacterList the list of character to look for
|