diff options
Diffstat (limited to 'Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster')
10 files changed, 2508 insertions, 0 deletions
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Include/Library/ScSpiCommonLib.h b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Include/Library/ScSpiCommonLib.h new file mode 100644 index 0000000000..3587babbd2 --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Include/Library/ScSpiCommonLib.h @@ -0,0 +1,361 @@ +/** @file
+ Header file for the SC SPI Common Driver.
+
+ Copyright (c) 2008 - 2017, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SC_SPI_COMMON_LIB_H_
+#define _SC_SPI_COMMON_LIB_H_
+
+///
+/// Maximum time allowed while waiting the SPI cycle to complete
+/// Wait Time = 6 seconds = 6000000 microseconds
+/// Wait Period = 10 microseconds
+///
+#define WAIT_TIME 6000000 ///< Wait Time = 6 seconds = 6000000 microseconds
+#define WAIT_PERIOD 10 ///< Wait Period = 10 microseconds
+
+///
+/// Flash cycle Type
+///
+typedef enum {
+ FlashCycleRead,
+ FlashCycleWrite,
+ FlashCycleErase,
+ FlashCycleReadSfdp,
+ FlashCycleReadJedecId,
+ FlashCycleWriteStatus,
+ FlashCycleReadStatus,
+ FlashCycleMax
+} FLASH_CYCLE_TYPE;
+
+///
+/// Flash Component Number
+///
+typedef enum {
+ FlashComponent0,
+ FlashComponent1,
+ FlashComponentMax
+} FLASH_COMPONENT_NUM;
+
+///
+/// Private data structure definitions for the driver
+///
+#define SC_SPI_PRIVATE_DATA_SIGNATURE SIGNATURE_32 ('P', 'S', 'P', 'I')
+
+typedef struct {
+ UINTN Signature;
+ EFI_HANDLE Handle;
+ SC_SPI_PROTOCOL SpiProtocol;
+ UINT16 PchAcpiBase;
+ UINTN PchSpiBase;
+ UINT16 RegionPermission;
+ UINT32 SfdpVscc0Value;
+ UINT32 SfdpVscc1Value;
+ UINT32 StrapBaseAddress;
+ UINT8 NumberOfComponents;
+ UINT32 Component1StartAddr;
+} SPI_INSTANCE;
+
+#define SPI_INSTANCE_FROM_SPIPROTOCOL(a) CR (a, SPI_INSTANCE, SpiProtocol, SC_SPI_PRIVATE_DATA_SIGNATURE)
+
+///
+/// Function prototypes used by the SPI protocol.
+///
+/**
+ Initialize an SPI protocol instance.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+ @retval EFI_SUCCESS The protocol instance was properly initialized
+ @retval EFI_UNSUPPORTED The SC is not supported by this module
+
+**/
+EFI_STATUS
+SpiProtocolConstructor (
+ IN SPI_INSTANCE *SpiInstance
+ );
+
+/**
+ This function is a hook for Spi to disable BIOS Write Protect.
+
+ @retval EFI_SUCCESS The protocol instance was properly initialized
+ @retval EFI_ACCESS_DENIED The BIOS Region can only be updated in SMM phase
+
+**/
+EFI_STATUS
+EFIAPI
+DisableBiosWriteProtect (
+ VOID
+ );
+
+/**
+ This function is a hook for Spi to enable BIOS Write Protect.
+
+**/
+VOID
+EFIAPI
+EnableBiosWriteProtect (
+ VOID
+ );
+
+/**
+ Acquire SC spi mmio address.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+ @retval UINT32 Return SPI MMIO address
+
+**/
+UINT32
+AcquireSpiBar0 (
+ IN SPI_INSTANCE *SpiInstance
+ );
+
+/**
+ Release SC spi mmio address.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+**/
+VOID
+ReleaseSpiBar0 (
+ IN SPI_INSTANCE *SpiInstance
+ );
+
+/**
+ Read data from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[out] Buffer The Pointer to caller-allocated buffer containing the data received.
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashRead (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ OUT UINT8 *Buffer
+ );
+
+/**
+ Write data to the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[in] Buffer Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashWrite (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ IN UINT8 *Buffer
+ );
+
+/**
+ Erase some area on the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashErase (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount
+ );
+
+/**
+ Read SFDP data from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Component Number for chip select
+ @param[in] ByteCount Number of bytes in SFDP data portion of the SPI cycle, the max number is 64
+ @param[out] SfdpData The Pointer to caller-allocated buffer containing the SFDP data received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashReadSfdp (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 ByteCount,
+ OUT UINT8 *SfdpData
+ );
+
+/**
+ Read Jedec Id from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Component Number for chip select
+ @param[in] ByteCount Number of bytes in JedecId data portion of the SPI cycle, the data size is 3 typically
+ @param[out] JedecId The Pointer to caller-allocated buffer containing JEDEC ID received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashReadJedecId (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 ByteCount,
+ OUT UINT8 *JedecId
+ );
+
+/**
+ Write the status register in the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[in] StatusValue The Pointer to caller-allocated buffer containing the value of Status register writing
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashWriteStatus (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ IN UINT8 *StatusValue
+ );
+
+/**
+ Read status register in the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[out] StatusValue The Pointer to caller-allocated buffer containing the value of Status register received.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashReadStatus (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ OUT UINT8 *StatusValue
+ );
+
+/**
+ Read SC Soft Strap Values.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] SoftStrapAddr SC Soft Strap address offset from FPSBA.
+ @param[in] ByteCount Number of bytes in SoftStrap data portion of the SPI cycle
+ @param[out] SoftStrapValue The Pointer to caller-allocated buffer containing SC Soft Strap Value.
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolReadPchSoftStrap (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 SoftStrapAddr,
+ IN UINT32 ByteCount,
+ OUT UINT8 *SoftStrapValue
+ );
+
+/**
+ This function sends the programmed SPI command to the slave device.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] SpiRegionType The SPI Region type for flash cycle which is listed in the Descriptor
+ @param[in] FlashCycleType The Flash SPI cycle type list in HSFC (Hardware Sequencing Flash Control Register) register
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[in, out] Buffer Pointer to caller-allocated buffer containing the data received or sent during the SPI cycle.
+
+ @retval EFI_SUCCESS SPI command completes successfully.
+ @retval EFI_DEVICE_ERROR Device error, the command aborts abnormally.
+ @retval EFI_ACCESS_DENIED Some unrecognized command encountered in hardware sequencing mode
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+
+**/
+EFI_STATUS
+SendSpiCmd (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN FLASH_CYCLE_TYPE FlashCycleType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ IN OUT UINT8 *Buffer
+ );
+
+/**
+ Wait execution cycle to complete on the SPI interface.
+
+ @param[in] This The SPI protocol instance
+ @param[in] PchSpiBar0 Spi MMIO base address
+ @param[in] ErrorCheck TRUE if the SpiCycle needs to do the error check
+
+ @retval TRUE SPI cycle completed on the interface.
+ @retval FALSE Time out while waiting the SPI cycle to complete.
+ It's not safe to program the next command on the SPI interface.
+
+**/
+BOOLEAN
+WaitForSpiCycleComplete (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 PchSpiBar0,
+ IN BOOLEAN ErrorCheck
+ );
+
+#endif
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Include/Protocol/Spi.h b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Include/Protocol/Spi.h new file mode 100644 index 0000000000..b761ad242f --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Include/Protocol/Spi.h @@ -0,0 +1,359 @@ +/** @file
+ This file defines the EFI SPI Protocol which implements the
+ Intel(R) ICH SPI Host Controller Compatibility Interface.
+
+ Copyright (c) 2012 - 2017, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SC_SPI_PROTOCOL_H_
+#define _SC_SPI_PROTOCOL_H_
+
+//
+// Extern the GUID for protocol users.
+//
+extern EFI_GUID gScSpiProtocolGuid;
+extern EFI_GUID gScSmmSpiProtocolGuid;
+
+//
+// Forward reference for ANSI C compatibility
+//
+typedef struct _SC_SPI_PROTOCOL SC_SPI_PROTOCOL;
+
+//
+// SPI protocol data structures and definitions
+//
+
+///
+/// Flash Region Type
+///
+typedef enum {
+ FlashRegionDescriptor,
+ FlashRegionBios,
+ FlashRegionMe,
+ FlashRegionGbE,
+ FlashRegionPlatformData,
+ FlashRegionAll,
+ FlashRegionMax
+} FLASH_REGION_TYPE;
+
+
+///
+/// SPI protocol data structures and definitions
+///
+///
+/// Number of Prefix Opcodes allowed on the SPI interface
+///
+#define SPI_NUM_PREFIX_OPCODE 2
+
+///
+/// Number of Opcodes in the Opcode Menu
+///
+#define SPI_NUM_OPCODE 8
+
+///
+/// Opcode Type
+/// EnumSpiOpcodeCommand: Command without address
+/// EnumSpiOpcodeRead: Read with address
+/// EnumSpiOpcodeWrite: Write with address
+///
+typedef enum {
+ EnumSpiOpcodeReadNoAddr,
+ EnumSpiOpcodeWriteNoAddr,
+ EnumSpiOpcodeRead,
+ EnumSpiOpcodeWrite,
+ EnumSpiOpcodeMax
+} SPI_OPCODE_TYPE;
+
+typedef enum {
+ EnumSpiCycle20MHz,
+ EnumSpiCycle33MHz,
+ EnumSpiCycle66MHz, /// Not supported by BXT
+ EnumSpiCycle50MHz,
+ EnumSpiCycleMax
+} SPI_CYCLE_FREQUENCY;
+
+///
+/// Hardware Sequencing required operations (as listed in Broxton EDS "Hardware
+/// Sequencing Commands and Opcode Requirements"
+///
+typedef enum {
+ EnumSpiOperationWriteStatus,
+ EnumSpiOperationProgramData_1_Byte,
+ EnumSpiOperationProgramData_64_Byte,
+ EnumSpiOperationReadData,
+ EnumSpiOperationWriteDisable,
+ EnumSpiOperationReadStatus,
+ EnumSpiOperationWriteEnable,
+ EnumSpiOperationFastRead,
+ EnumSpiOperationEnableWriteStatus,
+ EnumSpiOperationErase_256_Byte,
+ EnumSpiOperationErase_4K_Byte,
+ EnumSpiOperationErase_8K_Byte,
+ EnumSpiOperationErase_64K_Byte,
+ EnumSpiOperationFullChipErase,
+ EnumSpiOperationJedecId,
+ EnumSpiOperationDualOutputFastRead,
+ EnumSpiOperationDiscoveryParameters,
+ EnumSpiOperationOther,
+ EnumSpiOperationMax
+} SPI_OPERATION;
+
+///
+/// SPI Command Configuration
+/// Frequency The expected frequency to be used (value to be programmed to the SSFC
+/// Register)
+/// Operation Which Hardware Sequencing required operation this opcode respoinds to.
+/// The required operations are listed in EDS Table 5-55: "Hardware
+/// Sequencing Commands and Opcode Requirements"
+/// If the opcode does not corresponds to any operation listed, use
+/// EnumSpiOperationOther, and provides TYPE and Code for it in
+/// SpecialOpcodeEntry.
+///
+typedef struct _SPI_OPCODE_MENU_ENTRY {
+ SPI_OPCODE_TYPE Type;
+ UINT8 Code;
+ SPI_CYCLE_FREQUENCY Frequency;
+ SPI_OPERATION Operation;
+} SPI_OPCODE_MENU_ENTRY;
+
+//
+// Initialization data table loaded to the SPI host controller
+// VendorId Vendor ID of the SPI device
+// DeviceId0 Device ID0 of the SPI device
+// DeviceId1 Device ID1 of the SPI device
+// PrefixOpcode Prefix opcodes which are loaded into the SPI host controller
+// OpcodeMenu Opcodes which are loaded into the SPI host controller Opcode Menu
+// BiosStartOffset The offset of the start of the BIOS image relative to the flash device.
+// Please note this is a Flash Linear Address, NOT a memory space address.
+// This value is platform specific and depends on the system flash map.
+// This value is only used on non Descriptor mode.
+// BiosSize The the BIOS Image size in flash. This value is platform specific
+// and depends on the system flash map. Please note BIOS Image size may
+// be smaller than BIOS Region size (in Descriptor Mode) or the flash size
+// (in Non Descriptor Mode), and in this case, BIOS Image is supposed to be
+// placed at the top end of the BIOS Region (in Descriptor Mode) or the flash
+// (in Non Descriptor Mode)
+//
+typedef struct _SPI_INIT_TABLE {
+ UINT8 VendorId;
+ UINT8 DeviceId0;
+ UINT8 DeviceId1;
+ UINT8 PrefixOpcode[SPI_NUM_PREFIX_OPCODE];
+ SPI_OPCODE_MENU_ENTRY OpcodeMenu[SPI_NUM_OPCODE];
+ UINTN BiosStartOffset;
+ UINTN BiosSize;
+} SPI_INIT_TABLE;
+
+//
+// Protocol member functions
+//
+/**
+ Read data from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[out] Buffer The Pointer to caller-allocated buffer containing the dada received.
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_FLASH_READ) (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ OUT UINT8 *Buffer
+ );
+
+/**
+ Write data to the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[in] Buffer Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_FLASH_WRITE) (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ IN UINT8 *Buffer
+ );
+
+/**
+ Erase some area on the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_FLASH_ERASE) (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount
+ );
+
+/**
+ Read SFDP data from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Componen Number for chip select
+ @param[in] ByteCount Number of bytes in SFDP data portion of the SPI cycle, the max number is 64
+ @param[out] SfdpData The Pointer to caller-allocated buffer containing the SFDP data received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_FLASH_READ_SFDP) (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 ByteCount,
+ OUT UINT8 *SfdpData
+ );
+
+/**
+ Read Jedec Id from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Componen Number for chip select
+ @param[in] ByteCount Number of bytes in JedecId data portion of the SPI cycle, the data size is 3 typically
+ @param[out] JedecId The Pointer to caller-allocated buffer containing JEDEC ID received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_FLASH_READ_JEDEC_ID) (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 ByteCount,
+ OUT UINT8 *JedecId
+ );
+
+/**
+ Write the status register in the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[in] StatusValue The Pointer to caller-allocated buffer containing the value of Status register writing
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_FLASH_WRITE_STATUS) (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ IN UINT8 *StatusValue
+ );
+
+/**
+ Read status register in the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[out] StatusValue The Pointer to caller-allocated buffer containing the value of Status register received.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_FLASH_READ_STATUS) (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ OUT UINT8 *StatusValue
+ );
+
+/**
+ Read PCH Soft Strap Values.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] SoftStrapAddr PCH Soft Strap address offset from FPSBA.
+ @param[in] ByteCount Number of bytes in SoftStrap data portion of the SPI cycle
+ @param[out] SoftStrapValue The Pointer to caller-allocated buffer containing PCH Soft Strap Value.
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *SC_SPI_READ_PCH_SOFTSTRAP) (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 SoftStrapAddr,
+ IN UINT32 ByteCount,
+ OUT UINT8 *SoftStrapValue
+ );
+
+/**
+ The SC SPI protocol implement the South Cluster SPI Host Controller Interface
+ for DXE, SMM, and PEI environments, respectively.
+
+ These protocols/PPI allows a platform module to perform SPI operations through the
+ Intel PCH SPI Host Controller Interface.
+
+**/
+struct _SC_SPI_PROTOCOL {
+ SC_SPI_FLASH_READ FlashRead; ///< Read data from the flash part.
+ SC_SPI_FLASH_WRITE FlashWrite; ///< Write data to the flash part.
+ SC_SPI_FLASH_ERASE FlashErase; ///< Erase some area on the flash part.
+ SC_SPI_FLASH_READ_SFDP FlashReadSfdp; ///< Read SFDP data from the flash part.
+ SC_SPI_FLASH_READ_JEDEC_ID FlashReadJedecId; ///< Read Jedec Id from the flash part.
+ SC_SPI_FLASH_WRITE_STATUS FlashWriteStatus; ///< Write the status register in the flash part.
+ SC_SPI_FLASH_READ_STATUS FlashReadStatus; ///< Read status register in the flash part.
+ SC_SPI_READ_PCH_SOFTSTRAP ReadPchSoftStrap; ///< Read PCH Soft Strap Values
+};
+
+#endif
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Library/BaseScSpiCommonLib/BaseScSpiCommonLib.inf b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Library/BaseScSpiCommonLib/BaseScSpiCommonLib.inf new file mode 100644 index 0000000000..97aec77a5f --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Library/BaseScSpiCommonLib/BaseScSpiCommonLib.inf @@ -0,0 +1,40 @@ +## @file
+# Library for ScSpiCommon
+#
+# Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ScSpiCommonLib
+ FILE_GUID = A37CB67E-7D85-45B3-B07E-BF65BDB603E8
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ScSpiCommonLib
+
+[Sources]
+ SpiCommon.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ BroxtonSiPkg/BroxtonSiPkg.dec
+ BroxtonSiPkg/BroxtonSiPrivate.dec
+
+[LibraryClasses]
+ IoLib
+ DebugLib
+ PcdLib
+ ScPlatformLib
+
+[Pcd]
+ gEfiBxtTokenSpaceGuid.PcdScAcpiIoPortBaseAddress ## CONSUMES
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Library/BaseScSpiCommonLib/SpiCommon.c b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Library/BaseScSpiCommonLib/SpiCommon.c new file mode 100644 index 0000000000..97a13fa0d7 --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Library/BaseScSpiCommonLib/SpiCommon.c @@ -0,0 +1,994 @@ +/** @file
+ SC SPI Common Driver implements the SPI Host Controller Compatibility Interface.
+
+ Copyright (c) 2008 - 2017, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Uefi/UefiBaseType.h>
+#include <IndustryStandard/Pci30.h>
+#include <Library/IoLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MmPciLib.h>
+#include <Protocol/Spi.h>
+#include <ScAccess.h>
+#include <Library/ScSpiCommonLib.h>
+
+/**
+ Initialize an SPI protocol instance.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+ @retval EFI_SUCCESS The protocol instance was properly initialized
+ @retval EFI_UNSUPPORTED The SC is not supported by this module
+
+**/
+EFI_STATUS
+SpiProtocolConstructor (
+ IN SPI_INSTANCE *SpiInstance
+ )
+{
+ UINT32 ScSpiBar0;
+ UINT8 Comp0Density;
+
+ //
+ // Initialize the SPI protocol instance
+ //
+ SpiInstance->Signature = SC_SPI_PRIVATE_DATA_SIGNATURE;
+ SpiInstance->Handle = NULL;
+ SpiInstance->SpiProtocol.FlashRead = SpiProtocolFlashRead;
+ SpiInstance->SpiProtocol.FlashWrite = SpiProtocolFlashWrite;
+ SpiInstance->SpiProtocol.FlashErase = SpiProtocolFlashErase;
+ SpiInstance->SpiProtocol.FlashReadSfdp = SpiProtocolFlashReadSfdp;
+ SpiInstance->SpiProtocol.FlashReadJedecId = SpiProtocolFlashReadJedecId;
+ SpiInstance->SpiProtocol.FlashWriteStatus = SpiProtocolFlashWriteStatus;
+ SpiInstance->SpiProtocol.FlashReadStatus = SpiProtocolFlashReadStatus;
+ SpiInstance->SpiProtocol.ReadPchSoftStrap = SpiProtocolReadPchSoftStrap;
+
+ SpiInstance->PchSpiBase = MmPciBase (
+ DEFAULT_PCI_BUS_NUMBER_SC,
+ PCI_DEVICE_NUMBER_SPI,
+ PCI_FUNCTION_NUMBER_SPI
+ );
+
+ SpiInstance->PchAcpiBase = (UINT16) PcdGet16 (PcdScAcpiIoPortBaseAddress);
+ ASSERT (SpiInstance->PchAcpiBase != 0);
+
+ ScSpiBar0 = MmioRead32 (SpiInstance->PchSpiBase + R_SPI_BASE) & ~(B_SPI_BAR0_MASK);
+ if (ScSpiBar0 == 0) {
+ DEBUG ((DEBUG_ERROR, "ERROR : ScSpiBar0 is invalid!\n"));
+ ASSERT (FALSE);
+ }
+
+ MmioOr32 (SpiInstance->PchSpiBase + PCI_COMMAND_OFFSET, EFI_PCI_COMMAND_MEMORY_SPACE);
+
+ SpiInstance->RegionPermission = MmioRead16 (ScSpiBar0 + R_SPI_FRAP);
+ DEBUG ((DEBUG_INFO, "Flash RegionPermission : %0x\n", SpiInstance->RegionPermission));
+
+ SpiInstance->SfdpVscc0Value = MmioRead32 (ScSpiBar0 + R_SPI_LVSCC);
+ DEBUG ((DEBUG_INFO, "Component 0 SFDP VSCC value : %0x\n", SpiInstance->SfdpVscc0Value));
+ SpiInstance->SfdpVscc1Value = MmioRead32 (ScSpiBar0 + R_SPI_UVSCC);
+ DEBUG ((DEBUG_INFO, "Component 1 SFDP VSCC value : %0x\n", SpiInstance->SfdpVscc1Value));
+
+ //
+ // Select to Flash Map 0 Register to get the number of flash Component
+ //
+ MmioAndThenOr32 (
+ ScSpiBar0 + R_SPI_FDOC,
+ (UINT32) (~(B_SPI_FDOC_FDSS_MASK | B_SPI_FDOC_FDSI_MASK)),
+ (UINT32) (V_SPI_FDOC_FDSS_FSDM | R_SPI_FDBAR_FLASH_MAP0)
+ );
+
+ //
+ // Copy Zero based Number Of Components
+ //
+ SpiInstance->NumberOfComponents = (UINT8) ((MmioRead16 (ScSpiBar0 + R_SPI_FDOD) & B_SPI_FDBAR_NC) >> N_SPI_FDBAR_NC);
+ DEBUG ((DEBUG_INFO, "Component Number : %0x\n", SpiInstance->NumberOfComponents + 1));
+
+ MmioAndThenOr32 (
+ ScSpiBar0 + R_SPI_FDOC,
+ (UINT32) (~(B_SPI_FDOC_FDSS_MASK | B_SPI_FDOC_FDSI_MASK)),
+ (UINT32) (V_SPI_FDOC_FDSS_COMP | R_SPI_FCBA_FLCOMP)
+ );
+
+ //
+ // Copy Component 0 Density
+ //
+ Comp0Density = (UINT8) MmioRead32 (ScSpiBar0 + R_SPI_FDOD) & B_SPI_FLCOMP_COMP1_MASK;
+ SpiInstance->Component1StartAddr = (UINT32) (V_SPI_FLCOMP_COMP1_512KB << Comp0Density);
+ DEBUG ((DEBUG_INFO, "Component 1 StartAddr : %0x\n", SpiInstance->Component1StartAddr));
+
+ //
+ // Select FLASH_MAP1 to get Flash SC Strap Base Address
+ //
+ MmioAndThenOr32 (
+ (ScSpiBar0 + R_SPI_FDOC),
+ (UINT32) (~(B_SPI_FDOC_FDSS_MASK | B_SPI_FDOC_FDSI_MASK)),
+ (UINT32) (V_SPI_FDOC_FDSS_FSDM | R_SPI_FDBAR_FLASH_MAP1)
+ );
+
+ SpiInstance->StrapBaseAddress = MmioRead32 (ScSpiBar0 + R_SPI_FDOD) & B_SPI_FDBAR_FPSBA;
+
+ //
+ // Align FPSBA with address bits for the SC Strap portion of flash descriptor
+ //
+ SpiInstance->StrapBaseAddress &= B_SPI_FDBAR_FPSBA;
+ DEBUG ((DEBUG_INFO, "StrapBaseAddress : %0x\n", SpiInstance->StrapBaseAddress));
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Delay for at least the request number of microseconds for Runtime usage.
+
+ @param[in] ABase Acpi base address
+ @param[in] Microseconds Number of microseconds to delay.
+
+ @retval None
+**/
+VOID
+EFIAPI
+PchPmTimerStallRuntimeSafe (
+ IN UINT16 ABase,
+ IN UINTN Microseconds
+ )
+{
+ UINTN Ticks;
+ UINTN Counts;
+ UINTN CurrentTick;
+ UINTN OriginalTick;
+ UINTN RemainingTick;
+
+#ifdef SLE_FLAG
+ Microseconds = 0;
+#endif
+ if (Microseconds == 0) {
+ return;
+ }
+
+ OriginalTick = IoRead32 ((UINTN) (ABase + R_ACPI_PM1_TMR)) & B_ACPI_PM1_TMR_VAL;
+ CurrentTick = OriginalTick;
+
+ //
+ // The timer frequency is 3.579545 MHz, so 1 ms corresponds 3.58 clocks
+ //
+ Ticks = Microseconds * 358 / 100 + OriginalTick + 1;
+
+ //
+ // The loops needed by timer overflow
+ //
+ Counts = Ticks / V_ACPI_PM1_TMR_MAX_VAL;
+
+ //
+ // Remaining clocks within one loop
+ //
+ RemainingTick = Ticks % V_ACPI_PM1_TMR_MAX_VAL;
+
+ //
+ // not intend to use TMROF_STS bit of register PM1_STS, because this adds extra
+ // one I/O operation, and maybe generate SMI
+ //
+ while ((Counts != 0) || (RemainingTick > CurrentTick)) {
+ CurrentTick = IoRead32 ((UINTN) (ABase + R_ACPI_PM1_TMR)) & B_ACPI_PM1_TMR_VAL;
+ //
+ // Check if timer overflow
+ //
+ if ((CurrentTick < OriginalTick)) {
+ if (Counts != 0) {
+ Counts--;
+ } else {
+ //
+ // If timer overflow and Counts equal to 0, that means we already stalled more than
+ // RemainingTick, break the loop here
+ //
+ break;
+ }
+ }
+
+ OriginalTick = CurrentTick;
+ }
+}
+
+
+/**
+ Read data from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[out] Buffer The Pointer to caller-allocated buffer containing the data received.
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashRead (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ OUT UINT8 *Buffer
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Sends the command to the SPI interface to execute.
+ //
+ Status = SendSpiCmd (
+ This,
+ FlashRegionType,
+ FlashCycleRead,
+ Address,
+ ByteCount,
+ Buffer
+ );
+ return Status;
+}
+
+
+/**
+ Write data to the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[in] Buffer Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashWrite (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ IN UINT8 *Buffer
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Sends the command to the SPI interface to execute.
+ //
+ Status = SendSpiCmd (
+ This,
+ FlashRegionType,
+ FlashCycleWrite,
+ Address,
+ ByteCount,
+ Buffer
+ );
+ return Status;
+}
+
+
+/**
+ Erase some area on the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashErase (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Sends the command to the SPI interface to execute.
+ //
+ Status = SendSpiCmd (
+ This,
+ FlashRegionType,
+ FlashCycleErase,
+ Address,
+ ByteCount,
+ NULL
+ );
+ return Status;
+}
+
+
+/**
+ Read SFDP data from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Component Number for chip select
+ @param[in] ByteCount Number of bytes in SFDP data portion of the SPI cycle, the max number is 64
+ @param[out] SfdpData The Pointer to caller-allocated buffer containing the SFDP data received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashReadSfdp (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 ByteCount,
+ OUT UINT8 *SfdpData
+ )
+{
+ SPI_INSTANCE *SpiInstance;
+ EFI_STATUS Status;
+ UINT32 Address;
+
+ SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
+ Status = EFI_SUCCESS;
+
+ if ((ByteCount > 64) || (ComponentNumber > SpiInstance->NumberOfComponents)) {
+ ASSERT (FALSE);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Address = 0;
+ if (ComponentNumber == FlashComponent1) {
+ Address = SpiInstance->Component1StartAddr;
+ }
+
+ //
+ // Sends the command to the SPI interface to execute.
+ //
+ Status = SendSpiCmd (
+ This,
+ 0,
+ FlashCycleReadSfdp,
+ Address,
+ ByteCount,
+ SfdpData
+ );
+
+ return Status;
+}
+
+
+/**
+ Read Jedec Id from the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Component Number for chip select
+ @param[in] ByteCount Number of bytes in JedecId data portion of the SPI cycle, the data size is 3 typically
+ @param[out] JedecId The Pointer to caller-allocated buffer containing JEDEC ID received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashReadJedecId (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 ByteCount,
+ OUT UINT8 *JedecId
+ )
+{
+ SPI_INSTANCE *SpiInstance;
+ EFI_STATUS Status;
+ UINT32 Address;
+
+ SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
+ Status = EFI_SUCCESS;
+
+ if (ComponentNumber > SpiInstance->NumberOfComponents) {
+ ASSERT (FALSE);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Address = 0;
+ if (ComponentNumber == FlashComponent1) {
+ Address = SpiInstance->Component1StartAddr;
+ }
+
+ //
+ // Sends the command to the SPI interface to execute.
+ //
+ Status = SendSpiCmd (
+ This,
+ 0,
+ FlashCycleReadJedecId,
+ Address,
+ ByteCount,
+ JedecId
+ );
+
+ return Status;
+}
+
+
+/**
+ Write the status register in the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[in] StatusValue The Pointer to caller-allocated buffer containing the value of Status register writing
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashWriteStatus (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ IN UINT8 *StatusValue
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Sends the command to the SPI interface to execute.
+ //
+ Status = SendSpiCmd (
+ This,
+ 0,
+ FlashCycleWriteStatus,
+ 0,
+ ByteCount,
+ StatusValue
+ );
+
+ return Status;
+}
+
+
+/**
+ Read status register in the flash part.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[out] StatusValue The Pointer to caller-allocated buffer containing the value of Status register received.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolFlashReadStatus (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ OUT UINT8 *StatusValue
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Sends the command to the SPI interface to execute.
+ //
+ Status = SendSpiCmd (
+ This,
+ 0,
+ FlashCycleReadStatus,
+ 0,
+ ByteCount,
+ StatusValue
+ );
+
+ return Status;
+}
+
+
+/**
+ Read SC Soft Strap Values.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] SoftStrapAddr SC Soft Strap address offset from FPSBA.
+ @param[in] ByteCount Number of bytes in SoftStrap data portion of the SPI cycle
+ @param[out] SoftStrapValue The Pointer to caller-allocated buffer containing SC Soft Strap Value.
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiProtocolReadPchSoftStrap (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 SoftStrapAddr,
+ IN UINT32 ByteCount,
+ OUT UINT8 *SoftStrapValue
+ )
+{
+ SPI_INSTANCE *SpiInstance;
+ UINT32 StrapFlashAddr;
+ EFI_STATUS Status;
+
+ SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
+
+ ASSERT (SpiInstance->StrapBaseAddress != 0);
+
+ //
+ // SC Strap Flash Address = FPSBA + RamAddr
+ //
+ StrapFlashAddr = SpiInstance->StrapBaseAddress + SoftStrapAddr;
+
+ //
+ // Read SC Soft straps from using execute command
+ //
+ Status = SendSpiCmd (
+ This,
+ FlashRegionDescriptor,
+ FlashCycleRead,
+ StrapFlashAddr,
+ ByteCount,
+ SoftStrapValue
+ );
+
+ return Status;
+}
+
+
+/**
+ This function sends the programmed SPI command to the slave device.
+
+ @param[in] This Pointer to the SC_SPI_PROTOCOL instance.
+ @param[in] SpiRegionType The SPI Region type for flash cycle which is listed in the Descriptor
+ @param[in] FlashCycleType The Flash SPI cycle type list in HSFC (Hardware Sequencing Flash Control Register) register
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[in, out] Buffer Pointer to caller-allocated buffer containing the data received or sent during the SPI cycle.
+
+ @retval EFI_SUCCESS SPI command completes successfully.
+ @retval EFI_DEVICE_ERROR Device error, the command aborts abnormally.
+ @retval EFI_ACCESS_DENIED Some unrecognized command encountered in hardware sequencing mode
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+
+**/
+EFI_STATUS
+SendSpiCmd (
+ IN SC_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN FLASH_CYCLE_TYPE FlashCycleType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ IN OUT UINT8 *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Index;
+ SPI_INSTANCE *SpiInstance;
+ UINTN SpiBaseAddress;
+ UINT32 ScSpiBar0;
+ UINT32 LimitAddress;
+ UINT32 HardwareSpiAddr;
+ UINT16 PermissionBit;
+ UINT32 SpiDataCount;
+ UINT32 FlashCycle;
+ UINT8 BiosCtlSave;
+ UINT32 SmiEnSave;
+ UINT16 ABase;
+
+ Status = EFI_SUCCESS;
+ SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
+ SpiBaseAddress = SpiInstance->PchSpiBase;
+ ScSpiBar0 = AcquireSpiBar0 (SpiInstance);
+ SpiBaseAddress = SpiInstance->PchSpiBase;
+ ABase = SpiInstance->PchAcpiBase;
+
+ DEBUG ((EFI_D_ERROR, "SendSpiCmd Start. \n"));
+
+ //
+ // Disable SMIs to make sure normal mode flash access is not interrupted by an SMI
+ // whose SMI handler accesses flash (e.g. for error logging)
+ //
+ // *** NOTE: if the SMI_LOCK bit is set (i.e., PMC PCI Offset A0h [4]='1'),
+ // clearing B_GBL_SMI_EN will not have effect. In this situation, some other
+ // synchronization methods must be applied here or in the consumer of the
+ // SendSpiCmd. An example method is disabling the specific SMI sources
+ // whose SMI handlers access flash before flash cycle and re-enabling the SMI
+ // sources after the flash cycle .
+ //
+ SmiEnSave = IoRead32 ((UINTN) (ABase + R_SMI_EN));
+ IoWrite32 ((UINTN) (ABase + R_SMI_EN), SmiEnSave & (UINT32) (~B_SMI_EN_GBL_SMI));
+ BiosCtlSave = MmioRead8 (SpiBaseAddress + R_SPI_BCR) & B_SPI_BCR_SRC;
+
+ //
+ // If it's write cycle, disable Prefetching, Caching and disable BIOS Write Protect
+ //
+ if ((FlashCycleType == FlashCycleWrite) ||
+ (FlashCycleType == FlashCycleErase)) {
+ DEBUG ((EFI_D_ERROR, "DisableBiosWriteProtect Start. \n"));
+ Status = DisableBiosWriteProtect ();
+ DEBUG ((EFI_D_ERROR, "DisableBiosWriteProtect End. Status = 0x%x\n", Status));
+
+ if (EFI_ERROR (Status)) {
+ goto SendSpiCmdEnd;
+ }
+ MmioAndThenOr32 (
+ SpiBaseAddress + R_SPI_BCR,
+ (UINT32) (~B_SPI_BCR_SRC),
+ (UINT32) (V_SPI_BCR_SRC_PREF_DIS_CACHE_DIS << B_SPI_BCR_SRC)
+ );
+ }
+
+ //
+ // Make sure it's safe to program the command.
+ //
+ if (!WaitForSpiCycleComplete (This, ScSpiBar0, FALSE)) {
+ Status = EFI_DEVICE_ERROR;
+ goto SendSpiCmdEnd;
+ }
+
+ HardwareSpiAddr = Address;
+ if ((FlashCycleType == FlashCycleRead) ||
+ (FlashCycleType == FlashCycleWrite) ||
+ (FlashCycleType == FlashCycleErase)) {
+ switch (FlashRegionType) {
+ case FlashRegionDescriptor:
+ if (FlashCycleType == FlashCycleRead) {
+ PermissionBit = B_SPI_FRAP_BRRA_FLASHD;
+ } else {
+ PermissionBit = B_SPI_FRAP_BRRA_FLASHD;
+ }
+ HardwareSpiAddr += (MmioRead32 (ScSpiBar0 + R_SPI_FREG0_FLASHD) &
+ B_SPI_FREG0_BASE_MASK) << N_SPI_FREG0_BASE;
+ LimitAddress = (MmioRead32 (ScSpiBar0 + R_SPI_FREG0_FLASHD) &
+ B_SPI_FREG0_LIMIT_MASK) >> N_SPI_FREG0_LIMIT;
+ break;
+ case FlashRegionBios:
+ if (FlashCycleType == FlashCycleRead) {
+ PermissionBit = B_SPI_FRAP_BRRA_BIOS;
+ } else {
+ PermissionBit = B_SPI_FRAP_BRRA_BIOS;
+ }
+ HardwareSpiAddr += (MmioRead32 (ScSpiBar0 + R_SPI_FREG1_BIOS) &
+ B_SPI_FREG1_BASE_MASK) << N_SPI_FREG1_BASE;
+ LimitAddress = (MmioRead32 (ScSpiBar0 + R_SPI_FREG1_BIOS) &
+ B_SPI_FREG1_LIMIT_MASK) >> N_SPI_FREG1_LIMIT;
+ break;
+ case FlashRegionMe:
+ if (FlashCycleType == FlashCycleRead) {
+ PermissionBit = B_SPI_FRAP_BRRA_SEC;
+ } else {
+ PermissionBit = B_SPI_FRAP_BRWA_SEC;
+ }
+ HardwareSpiAddr += (MmioRead32 (ScSpiBar0 + R_SPI_FREG2_SEC) &
+ B_SPI_FREG2_BASE_MASK) << N_SPI_FREG2_BASE;
+ LimitAddress = (MmioRead32 (ScSpiBar0 + R_SPI_FREG2_SEC) &
+ B_SPI_FREG2_LIMIT_MASK) >> N_SPI_FREG2_LIMIT;
+ break;
+ case FlashRegionGbE:
+ if (FlashCycleType == FlashCycleRead) {
+ PermissionBit = B_SPI_FRAP_BRRA_GBE;
+ } else {
+ PermissionBit = B_SPI_FRAP_BRWA_GBE;
+ }
+ HardwareSpiAddr += (MmioRead32 (ScSpiBar0 + R_SPI_FREG3_GBE) &
+ B_SPI_FREG3_BASE_MASK) << N_SPI_FREG3_BASE;
+ LimitAddress = (MmioRead32 (ScSpiBar0 + R_SPI_FREG3_GBE) &
+ B_SPI_FREG3_LIMIT_MASK) >> N_SPI_FREG3_LIMIT;
+ break;
+ case FlashRegionPlatformData:
+ if (FlashCycleType == FlashCycleRead) {
+ PermissionBit = B_SPI_FRAP_BRRA_PLATFORM;
+ } else {
+ PermissionBit = B_SPI_FRAP_BRWA_PLATFORM;
+ }
+ HardwareSpiAddr += (MmioRead32 (ScSpiBar0 + R_SPI_FREG4_PLATFORM_DATA) &
+ B_SPI_FREG4_BASE_MASK) << N_SPI_FREG4_BASE;
+ LimitAddress = (MmioRead32 (ScSpiBar0 + R_SPI_FREG4_PLATFORM_DATA) &
+ B_SPI_FREG4_LIMIT_MASK) >> N_SPI_FREG4_LIMIT;
+ break;
+ case FlashRegionAll:
+ //
+ // FlashRegionAll indicates address is relative to flash device (i.e., address is Flash Linear Address)
+ // No error checking for this case
+ //
+ LimitAddress = 0;
+ PermissionBit = 0;
+ break;
+ default:
+ Status = EFI_UNSUPPORTED;
+ goto SendSpiCmdEnd;
+ }
+ if ((LimitAddress != 0) && (Address > LimitAddress)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto SendSpiCmdEnd;
+ }
+
+ //
+ // If the operation is read, but the region attribute is not read allowed, return error.
+ // If the operation is write, but the region attribute is not write allowed, return error.
+ //
+ if ((PermissionBit != 0) && ((SpiInstance->RegionPermission & PermissionBit) == 0)) {
+ Status = EFI_ACCESS_DENIED;
+ DEBUG ((EFI_D_ERROR, " if ((PermissionBit != 0) && ((SpiInstance->RegionPermission & PermissionBit) == 0)) { Status = EFI_ACCESS_DENIED \n"));
+ goto SendSpiCmdEnd;
+ }
+ }
+
+ //
+ // Check for SC SPI hardware sequencing required commands
+ //
+ FlashCycle = 0;
+ switch (FlashCycleType) {
+ case FlashCycleRead:
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_READ << N_SPI_HSFS_CYCLE);
+ break;
+ case FlashCycleWrite:
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_WRITE << N_SPI_HSFS_CYCLE);
+ break;
+ case FlashCycleErase:
+ if (((ByteCount % SIZE_4KB) != 0) ||
+ ((HardwareSpiAddr % SIZE_4KB) != 0)) {
+ ASSERT (FALSE);
+ Status = EFI_INVALID_PARAMETER;
+ goto SendSpiCmdEnd;
+ }
+ break;
+ case FlashCycleReadSfdp:
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_READ_SFDP << N_SPI_HSFS_CYCLE);
+ break;
+ case FlashCycleReadJedecId:
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_READ_JEDEC_ID << N_SPI_HSFS_CYCLE);
+ break;
+ case FlashCycleWriteStatus:
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_WRITE_STATUS << N_SPI_HSFS_CYCLE);
+ break;
+ case FlashCycleReadStatus:
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_READ_STATUS << N_SPI_HSFS_CYCLE);
+ break;
+ default:
+ //
+ // Unrecognized Operation
+ //
+ ASSERT (FALSE);
+ Status = EFI_INVALID_PARAMETER;
+ goto SendSpiCmdEnd;
+ break;
+ }
+
+ do {
+ SpiDataCount = ByteCount;
+ if ((FlashCycleType == FlashCycleRead) || (FlashCycleType == FlashCycleWrite)) {
+ //
+ // Trim at 256 byte boundary per operation,
+ // - SC SPI controller requires trimming at 4KB boundary
+ // - Some SPI chips require trimming at 256 byte boundary for write operation
+ // - Trimming has limited performance impact as we can read / write at most 64 byte
+ // per operation
+ //
+ if (HardwareSpiAddr + ByteCount > ((HardwareSpiAddr + BIT8) &~(BIT8 - 1))) {
+ SpiDataCount = (((UINT32) (HardwareSpiAddr) + BIT8) &~(BIT8 - 1)) - (UINT32) (HardwareSpiAddr);
+ }
+ //
+ // Calculate the number of bytes to shift in/out during the SPI data cycle.
+ // Valid settings for the number of bytes during each data portion of the
+ // SC SPI cycles are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 16, 24, 32, 40, 48, 56, 64
+ //
+ if (SpiDataCount >= 64) {
+ SpiDataCount = 64;
+ } else if ((SpiDataCount &~0x07) != 0) {
+ SpiDataCount = SpiDataCount &~0x07;
+ }
+ }
+ if (FlashCycleType == FlashCycleErase) {
+ if (((ByteCount / SIZE_64KB) != 0) &&
+ ((ByteCount % SIZE_64KB) == 0) &&
+ ((HardwareSpiAddr % SIZE_64KB) == 0)) {
+ if (HardwareSpiAddr < SpiInstance->Component1StartAddr) {
+ //
+ // Check whether Component0 support 64k Erase
+ //
+ if ((SpiInstance->SfdpVscc0Value & B_SPI_LVSCC_EO_64K) != 0) {
+ SpiDataCount = SIZE_64KB;
+ } else {
+ SpiDataCount = SIZE_4KB;
+ }
+ } else {
+ //
+ // Check whether Component1 support 64k Erase
+ //
+ if ((SpiInstance->SfdpVscc1Value & B_SPI_LVSCC_EO_64K) != 0) {
+ SpiDataCount = SIZE_64KB;
+ } else {
+ SpiDataCount = SIZE_4KB;
+ }
+ }
+ } else {
+ SpiDataCount = SIZE_4KB;
+ }
+ if (SpiDataCount == SIZE_4KB) {
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_4K_ERASE << N_SPI_HSFS_CYCLE);
+ } else {
+ FlashCycle = (UINT32) (V_SPI_HSFS_CYCLE_64K_ERASE << N_SPI_HSFS_CYCLE);
+ }
+ }
+ //
+ // If it's write cycle, load data into the SPI data buffer.
+ //
+ if ((FlashCycleType == FlashCycleWrite) || (FlashCycleType == FlashCycleWriteStatus)) {
+ if ((SpiDataCount & 0x07) != 0) {
+ //
+ // Use Byte write if Data Count is 0, 1, 2, 3, 4, 5, 6, 7
+ //
+ for (Index = 0; Index < SpiDataCount; Index++) {
+ MmioWrite8 (ScSpiBar0 + R_SPI_FDATA00 + Index, Buffer[Index]);
+ }
+ } else {
+ //
+ // Use Dword write if Data Count is 8, 16, 24, 32, 40, 48, 56, 64
+ //
+ for (Index = 0; Index < SpiDataCount; Index += sizeof (UINT32)) {
+ MmioWrite32 (ScSpiBar0 + R_SPI_FDATA00 + Index, *(UINT32 *) (Buffer + Index));
+ }
+ }
+ }
+
+ //
+ // Set the Flash Address
+ //
+ MmioWrite32 (
+ (ScSpiBar0 + R_SPI_FADDR),
+ (UINT32) (HardwareSpiAddr & B_SPI_FADDR_MASK)
+ );
+
+ //
+ // Set Data count, Flash cycle, and Set Go bit to start a cycle
+ //
+ MmioAndThenOr32 (
+ ScSpiBar0 + R_SPI_HSFS,
+ (UINT32) (~(B_SPI_HSFS_FDBC_MASK | B_SPI_HSFS_CYCLE_MASK)),
+ (UINT32) (((SpiDataCount - 1) << N_SPI_HSFS_FDBC) | FlashCycle | B_SPI_HSFS_CYCLE_FGO)
+ );
+
+ //
+ // end of command execution
+ //
+ // Wait the SPI cycle to complete.
+ //
+ if (!WaitForSpiCycleComplete (This, ScSpiBar0, TRUE)) {
+ ASSERT (FALSE);
+ Status = EFI_DEVICE_ERROR;
+ goto SendSpiCmdEnd;
+ }
+
+ //
+ // If it's read cycle, load data into the caller's buffer.
+ //
+ if ((FlashCycleType == FlashCycleRead) ||
+ (FlashCycleType == FlashCycleReadSfdp) ||
+ (FlashCycleType == FlashCycleReadJedecId) ||
+ (FlashCycleType == FlashCycleReadStatus)) {
+ if ((SpiDataCount & 0x07) != 0) {
+ //
+ // Use Byte read if Data Count is 0, 1, 2, 3, 4, 5, 6, 7
+ //
+ for (Index = 0; Index < SpiDataCount; Index++) {
+ Buffer[Index] = MmioRead8 (ScSpiBar0 + R_SPI_FDATA00 + Index);
+ }
+ } else {
+ //
+ // Use Dword read if Data Count is 8, 16, 24, 32, 40, 48, 56, 64
+ //
+ for (Index = 0; Index < SpiDataCount; Index += sizeof (UINT32)) {
+ *(UINT32 *) (Buffer + Index) = MmioRead32 (ScSpiBar0 + R_SPI_FDATA00 + Index);
+ }
+ }
+ }
+
+ HardwareSpiAddr += SpiDataCount;
+ Buffer += SpiDataCount;
+ ByteCount -= SpiDataCount;
+ } while (ByteCount > 0);
+
+SendSpiCmdEnd:
+ DEBUG ((EFI_D_ERROR, "SendSpiCmd End. Status = 0x%x\n", Status));
+
+ //
+ // Restore the settings for SPI Prefetching and Caching and enable BIOS Write Protect.
+ //
+ if ((FlashCycleType == FlashCycleWrite) ||
+ (FlashCycleType == FlashCycleErase)) {
+ EnableBiosWriteProtect ();
+ MmioAndThenOr8 (
+ SpiBaseAddress + R_SPI_BCR,
+ (UINT8) ~B_SPI_BCR_SRC,
+ BiosCtlSave
+ );
+ }
+
+ //
+ // Restore SMIs.
+ //
+ IoWrite32 ((UINTN) (ABase + R_SMI_EN), SmiEnSave);
+ ReleaseSpiBar0 (SpiInstance);
+
+ return Status;
+}
+
+
+/**
+ Wait execution cycle to complete on the SPI interface.
+
+ @param[in] This The SPI protocol instance
+ @param[in] ScSpiBar0 Spi MMIO base address
+ @param[in] ErrorCheck TRUE if the SpiCycle needs to do the error check
+
+ @retval TRUE SPI cycle completed on the interface.
+ @retval FALSE Time out while waiting the SPI cycle to complete.
+ It's not safe to program the next command on the SPI interface.
+
+**/
+BOOLEAN
+WaitForSpiCycleComplete (
+ IN SC_SPI_PROTOCOL *This,
+ IN UINT32 ScSpiBar0,
+ IN BOOLEAN ErrorCheck
+ )
+{
+ UINT64 WaitTicks;
+ UINT64 WaitCount;
+ UINT32 Data32;
+ SPI_INSTANCE *SpiInstance;
+
+ SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
+
+ //
+ // Convert the wait period allowed into to tick count
+ //
+ WaitCount = WAIT_TIME / WAIT_PERIOD;
+
+ //
+ // Wait for the SPI cycle to complete.
+ //
+ for (WaitTicks = 0; WaitTicks < WaitCount; WaitTicks++) {
+ Data32 = MmioRead32 (ScSpiBar0 + R_SPI_HSFS);
+ if ((Data32 & B_SPI_HSFS_SCIP) == 0) {
+ MmioWrite32 (ScSpiBar0 + R_SPI_HSFS, B_SPI_HSFS_FCERR | B_SPI_HSFS_FDONE);
+ if ( ((Data32 & B_SPI_HSFS_FCERR) != 0) && (ErrorCheck == TRUE)) {
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+ }
+ PchPmTimerStallRuntimeSafe (SpiInstance->PchAcpiBase, WAIT_PERIOD);
+ }
+
+ return FALSE;
+}
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpi.c b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpi.c new file mode 100644 index 0000000000..f2a15ea735 --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpi.c @@ -0,0 +1,313 @@ +/** @file
+ SC SPI Runtime Driver implements the SPI Host Controller Compatibility Interface.
+
+ Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "ScSpi.h"
+
+///
+/// Global variables
+///
+GLOBAL_REMOVE_IF_UNREFERENCED SPI_INSTANCE *mSpiInstance;
+
+///
+/// PchSpiBar0PhysicalAddr keeps the reserved MMIO range assiged to SPI from PEI.
+/// It won't be updated no matter the SPI MMIO is reallocated by BIOS PCI enum.
+/// And it's used to override the SPI BAR0 register in runtime environment,
+///
+GLOBAL_REMOVE_IF_UNREFERENCED UINT32 mPchSpiBar0PhysicalAddr;
+
+///
+/// PchSpiBar0VirtualAddr keeps the virtual address of PchSpiBar0PhysicalAddr.
+/// And it's used to provide the SPI BAR0 virtual address mapping to PchSpiBar0PhysicalAddr
+/// in runtime environment.
+///
+GLOBAL_REMOVE_IF_UNREFERENCED UINT32 mPchSpiBar0VirtualAddr;
+GLOBAL_REMOVE_IF_UNREFERENCED BOOLEAN mRuntimeFlag;
+
+//
+// Function implementations
+//
+/**
+ Fixup internal data pointers so that the services can be called in virtual mode.
+
+ @param[in] Event The event registered.
+ @param[in] Context Event context. Not used in this event handler.
+
+**/
+VOID
+EFIAPI
+PchSpiVirtualAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ mRuntimeFlag = TRUE;
+
+ EfiConvertPointer (0x0, (VOID **) &mPchSpiBar0VirtualAddr);
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->PchSpiBase));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.FlashRead));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.FlashWrite));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.FlashErase));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.FlashReadSfdp));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.FlashReadJedecId));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.FlashWriteStatus));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.FlashReadStatus));
+ EfiConvertPointer (0x0, (VOID **) &(mSpiInstance->SpiProtocol.ReadPchSoftStrap));
+ EfiConvertPointer (0x0, (VOID **) &mSpiInstance);
+}
+
+
+/**
+ SPI Runtime DXE Module Entry Point.
+
+ Introduction:
+ The SPI Runtime DXE module provide a standard way for other modules to use the PCH SPI Interface in DXE/Runtime.
+
+ Pre:
+ If SPI Runtime DXE driver is run before Status Code Runtime Protocol is installed
+ and there is the need to use Status code in the driver, it will be necessary
+ to add EFI_STATUS_CODE_RUNTIME_PROTOCOL_GUID to the dependency file.
+
+ Result:
+ The SPI Runtime DXE driver produces SC_SPI_PROTOCOL.
+
+ Integration Check List:
+ This driver supports Descriptor Mode only.
+ This driver supports Hardware Sequence only.
+
+ @param[in] ImageHandle Image handle of this driver.
+ @param[in] SystemTable Global system service table.
+
+ @retval EFI_SUCCESS Initialization complete.
+ @retval EFI_UNSUPPORTED The chipset is unsupported by this driver.
+ @retval EFI_OUT_OF_RESOURCES Do not have enough resources to initialize the driver.
+ @retval EFI_DEVICE_ERROR Device error, driver exits abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+InstallScSpi (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ UINT64 BaseAddress;
+ UINT64 Length;
+ EFI_GCD_MEMORY_SPACE_DESCRIPTOR SpiPciMemorySpaceDescriptor;
+ EFI_GCD_MEMORY_SPACE_DESCRIPTOR SpiBar0MemorySpaceDescriptor;
+ UINT64 Attributes;
+ EFI_EVENT AddressChangeEvent;
+
+ DEBUG ((DEBUG_INFO, "InstallScSpi() Start\n"));
+
+ //
+ // Allocate Runtime memory for the SPI protocol instance.
+ //
+ mSpiInstance = AllocateRuntimeZeroPool (sizeof (SPI_INSTANCE));
+ if (mSpiInstance == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // Initialize the SPI protocol instance
+ //
+ Status = SpiProtocolConstructor (mSpiInstance);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ mPchSpiBar0PhysicalAddr = SC_SPI_BASE_ADDRESS;
+ mPchSpiBar0VirtualAddr = mPchSpiBar0PhysicalAddr;
+
+ //
+ // Install the PCH_SPI_PROTOCOL interface
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &(mSpiInstance->Handle),
+ &gScSpiProtocolGuid,
+ &(mSpiInstance->SpiProtocol),
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ FreePool (mSpiInstance);
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Create Address Change event
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ PchSpiVirtualAddressChangeEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &AddressChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Set SPI space in GCD to be RUNTIME so that the range will be supported in
+ // virtual address mode in EFI aware OS runtime.
+ // It will assert if SPI Memory Space is not allocated
+ // The caller is responsible for the existence and allocation of the SPi Memory Spaces
+ //
+ //
+ // SPI memory space
+ //
+ BaseAddress = (EFI_PHYSICAL_ADDRESS) mSpiInstance->PchSpiBase;
+ Length = 0x1000;
+
+ Status = gDS->GetMemorySpaceDescriptor (BaseAddress, &SpiPciMemorySpaceDescriptor);
+ ASSERT_EFI_ERROR (Status);
+
+ Attributes = SpiPciMemorySpaceDescriptor.Attributes | EFI_MEMORY_RUNTIME;
+ Status = gDS->SetMemorySpaceAttributes (
+ BaseAddress,
+ Length,
+ Attributes
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // SPI MMIO memory space
+ //
+ BaseAddress = (EFI_PHYSICAL_ADDRESS) mPchSpiBar0PhysicalAddr;
+ Length = 0x1000;
+
+ Status = gDS->GetMemorySpaceDescriptor (BaseAddress, &SpiBar0MemorySpaceDescriptor);
+ ASSERT_EFI_ERROR (Status);
+
+ Attributes = SpiBar0MemorySpaceDescriptor.Attributes | EFI_MEMORY_RUNTIME;
+ Status = gDS->SetMemorySpaceAttributes (
+ BaseAddress,
+ Length,
+ Attributes
+ );
+ ASSERT_EFI_ERROR (Status);
+ DEBUG ((DEBUG_INFO, "InstallScSpi() End\n"));
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Acquire SC SPI MMIO address.
+ It is not expected for this BAR0 to change because the SPI device is hidden
+ from the OS for SKL PCH LP/H B stepping and above (refer to section 3.5.1),
+ but if it is ever different from the preallocated address, reassign it back.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+ @retval UINT32 Return SPI MMIO address
+
+**/
+UINT32
+AcquireSpiBar0 (
+ IN SPI_INSTANCE *SpiInstance
+ )
+{
+ UINT32 SpiBar0;
+
+ //
+ // Save original SPI MMIO address
+ //
+ SpiBar0 = MmioRead32 (SpiInstance->PchSpiBase + R_SPI_BASE) & ~(B_SPI_BAR0_MASK);
+
+ if (SpiBar0 != mPchSpiBar0PhysicalAddr) {
+ //
+ // Temporary disable MSE, and override with SPI reserved MMIO address, then enable MSE.
+ //
+ MmioAnd8 (SpiInstance->PchSpiBase + PCI_COMMAND_OFFSET, (UINT8) ~EFI_PCI_COMMAND_MEMORY_SPACE);
+ MmioWrite32 (SpiInstance->PchSpiBase + R_SPI_BASE, mPchSpiBar0PhysicalAddr);
+ MmioOr8 (SpiInstance->PchSpiBase + PCI_COMMAND_OFFSET, EFI_PCI_COMMAND_MEMORY_SPACE);
+ }
+
+ if (mRuntimeFlag) {
+ return mPchSpiBar0VirtualAddr;
+ } else {
+ return mPchSpiBar0PhysicalAddr;
+ }
+}
+
+
+/**
+ Release SC spi mmio address. Do nothing.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+**/
+VOID
+ReleaseSpiBar0 (
+ IN SPI_INSTANCE *SpiInstance
+ )
+{
+}
+
+
+/**
+ This function is a hook for Spi to disable BIOS Write Protect.
+
+ @retval EFI_SUCCESS The protocol instance was properly initialized
+ @retval EFI_ACCESS_DENIED The BIOS Region can only be updated in SMM phase
+
+**/
+EFI_STATUS
+EFIAPI
+DisableBiosWriteProtect (
+ VOID
+ )
+{
+ UINTN SpiBaseAddress;
+
+ SpiBaseAddress = mSpiInstance->PchSpiBase;
+ if ((MmioRead8 (SpiBaseAddress + R_SPI_BCR) & B_SPI_BCR_EISS) != 0) {
+ return EFI_ACCESS_DENIED;
+ }
+
+ //
+ // Enable the access to the BIOS space for both read and write cycles
+ //
+ MmioOr8 (
+ SpiBaseAddress + R_SPI_BCR,
+ (UINT8) (B_SPI_BCR_BIOSWE)
+ );
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ This function is a hook for Spi to enable BIOS Write Protect.
+
+**/
+VOID
+EFIAPI
+EnableBiosWriteProtect (
+ VOID
+ )
+{
+ UINTN SpiBaseAddress;
+
+ SpiBaseAddress = mSpiInstance->PchSpiBase;
+
+ //
+ // Disable the access to the BIOS space for write cycles
+ //
+ MmioAnd8 (
+ SpiBaseAddress + R_SPI_BCR,
+ (UINT8) (~B_SPI_BCR_BIOSWE)
+ );
+}
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpi.h b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpi.h new file mode 100644 index 0000000000..ad2cb454ad --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpi.h @@ -0,0 +1,50 @@ +/** @file
+ Header file for the SC SPI Runtime Driver.
+
+ Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SC_SPI_RT_H_
+#define _SC_SPI_RT_H_
+
+#include <Library/UefiLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Guid/EventGroup.h>
+#include <ScAccess.h>
+#include <Protocol/Spi.h>
+#include <Library/ScSpiCommonLib.h>
+#include <IndustryStandard/Pci30.h>
+
+//
+// Function prototypes used by the SPI protocol.
+//
+/**
+ Fixup internal data pointers so that the services can be called in virtual mode.
+
+ @param[in] Event The event registered.
+ @param[in] Context Event context. Not used in this event handler.
+
+**/
+VOID
+EFIAPI
+PchSpiVirtualAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+#endif
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpiRuntime.inf b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpiRuntime.inf new file mode 100644 index 0000000000..ea8f42a7f3 --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/RuntimeDxe/ScSpiRuntime.inf @@ -0,0 +1,60 @@ +## @file
+# Component description file for SPI Runtime driver.
+#
+# Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ScSpiRuntime
+ FILE_GUID = C194C6EA-B68C-4981-B64B-9BD271474B20
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InstallScSpi
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 EBC
+
+[Sources]
+ ScSpi.h
+ ScSpi.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ BroxtonSiPkg/BroxtonSiPkg.dec
+ BroxtonSiPkg/BroxtonSiPrivate.dec
+
+[LibraryClasses]
+ UefiRuntimeServicesTableLib
+ UefiRuntimeLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ DxeServicesTableLib
+ UefiLib
+ DebugLib
+ MemoryAllocationLib
+ IoLib
+ MmPciLib
+ ScSpiCommonLib
+
+[Guids]
+ gEfiEventVirtualAddressChangeGuid ## UNDEFINED
+
+[Protocols]
+ gScSpiProtocolGuid ## PRODUCES
+
+[Depex]
+ gEfiStatusCodeRuntimeProtocolGuid AND
+ TRUE
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpi.c b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpi.c new file mode 100644 index 0000000000..1a84f6fb3c --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpi.c @@ -0,0 +1,249 @@ +/** @file
+ SC SPI SMM Driver implements the SPI Host Controller Compatibility Interface.
+
+ Copyright (c) 2012 - 2017, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "ScSpi.h"
+
+///
+/// Global variables
+///
+GLOBAL_REMOVE_IF_UNREFERENCED SPI_INSTANCE *mSpiInstance;
+
+///
+/// mPchSpiResvMmioAddr keeps the reserved MMIO range assiged to SPI.
+/// In SMM it always set back the reserved MMIO address to SPI BAR0 to ensure the MMIO range
+/// won't overlap with SMRAM range, and trusted.
+///
+GLOBAL_REMOVE_IF_UNREFERENCED UINT32 mSpiResvMmioAddr;
+
+/**
+ SPI Runtime SMM Module Entry Point.
+
+ Introduction:
+ The SPI SMM module provide a standard way for other modules to use the PCH SPI Interface in SMM.
+
+ Pre:
+ EFI_SMM_BASE2_PROTOCOL
+ Documented in System Management Mode Core Interface Specification.
+
+ Result:
+ The SPI SMM driver produces PCH_SPI_PROTOCOL with GUID
+ gPchSmmSpiProtocolGuid which is different from SPI RUNTIME driver.
+
+ Integration Check List:
+ This driver supports Descriptor Mode only.
+ This driver supports Hardware Sequence only.
+ When using SMM SPI Protocol to perform flash access in an SMI handler,
+ and the SMI occurrence is asynchronous to normal mode code execution,
+ proper synchronization mechanism must be applied, e.g. disable SMI before
+ the normal mode SendSpiCmd() starts and re-enable SMI after
+ the normal mode SendSpiCmd() completes.
+ @note The implementation of SendSpiCmd() uses GBL_SMI_EN in
+ SMI_EN register (ABase + 30h) to disable and enable SMIs. But this may
+ not be effective as platform may well set the SMI_LOCK bit (i.e., PMC PCI Offset A0h [4]).
+ So the synchronization at caller level is likely needed.
+
+ @param[in] ImageHandle Image handle of this driver.
+ @param[in] SystemTable Global system service table.
+
+ @retval EFI_SUCCESS Initialization complete.
+ @retval EFI_UNSUPPORTED The chipset is unsupported by this driver.
+ @retval EFI_OUT_OF_RESOURCES Do not have enough resources to initialize the driver.
+ @retval EFI_DEVICE_ERROR Device error, driver exits abnormally.
+
+**/
+EFI_STATUS
+EFIAPI
+InstallScSpi (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Init PCH spi reserved MMIO address.
+ //
+ mSpiResvMmioAddr = SC_SPI_BASE_ADDRESS;
+
+ //
+ // Allocate pool for SPI protocol instance
+ //
+ Status = gSmst->SmmAllocatePool (
+ EfiRuntimeServicesData,
+ sizeof (SPI_INSTANCE),
+ (VOID **) &mSpiInstance
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (mSpiInstance == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ZeroMem ((VOID *) mSpiInstance, sizeof (SPI_INSTANCE));
+
+ //
+ // Initialize the SPI protocol instance
+ //
+ Status = SpiProtocolConstructor (mSpiInstance);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Install the SMM SC_SPI_PROTOCOL interface
+ //
+ Status = gSmst->SmmInstallProtocolInterface (
+ &(mSpiInstance->Handle),
+ &gScSmmSpiProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &(mSpiInstance->SpiProtocol)
+ );
+ if (EFI_ERROR (Status)) {
+ gSmst->SmmFreePool (mSpiInstance);
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Acquire SC spi mmio address.
+ It is not expected for this BAR0 to change because the SPI device is hidden
+ from the OS for SKL PCH LP/H B stepping and above (refer to section 3.5.1),
+ but if it is ever different from the preallocated address, reassign it back.
+ In SMM, it always override the BAR0 and returns the reserved MMIO range for SPI.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+ @retval PchSpiBar0 Return SPI MMIO address
+
+**/
+UINT32
+AcquireSpiBar0 (
+ IN SPI_INSTANCE *SpiInstance
+ )
+{
+ UINT32 SpiBar0;
+
+ //
+ // Save original SPI MMIO address
+ //
+ SpiBar0 = MmioRead32 (SpiInstance->PchSpiBase + R_SPI_BASE) & B_SPI_BASE_BAR;
+
+ if (SpiBar0 != mSpiResvMmioAddr) {
+ //
+ // Temporary disable MSE, and override with SPI reserved MMIO address, then enable MSE.
+ //
+ MmioAnd8 (SpiInstance->PchSpiBase + PCI_COMMAND_OFFSET, (UINT8) ~EFI_PCI_COMMAND_MEMORY_SPACE);
+ MmioWrite32 (SpiInstance->PchSpiBase + R_SPI_BASE, mSpiResvMmioAddr);
+ MmioOr8 (SpiInstance->PchSpiBase + PCI_COMMAND_OFFSET, EFI_PCI_COMMAND_MEMORY_SPACE);
+ }
+
+ //
+ // SPIBAR0 will be different before and after PCI enum so need to get it from SPI BAR0 reg.
+ //
+ return mSpiResvMmioAddr;
+}
+
+
+/**
+ Release SC spi mmio address. Do nothing.
+
+ @param[in] SpiInstance Pointer to SpiInstance to initialize
+
+ @retval None
+
+**/
+VOID
+ReleaseSpiBar0 (
+ IN SPI_INSTANCE *SpiInstance
+ )
+{
+}
+
+
+/**
+ This function is a hook for Spi to disable BIOS Write Protect.
+
+ @param[in] None
+
+ @retval EFI_SUCCESS The protocol instance was properly initialized
+ @retval EFI_ACCESS_DENIED The BIOS Region can only be updated in SMM phase
+
+**/
+EFI_STATUS
+EFIAPI
+DisableBiosWriteProtect (
+ VOID
+ )
+{
+ UINTN SpiBaseAddress;
+ UINT32 Data32;
+
+ SpiBaseAddress = MmPciBase (
+ DEFAULT_PCI_BUS_NUMBER_SC,
+ PCI_DEVICE_NUMBER_SPI,
+ PCI_FUNCTION_NUMBER_SPI
+ );
+
+ //
+ // Set BIOSWE bit (SPI PCI Offset DCh [0]) = 1b
+ // Enable the access to the BIOS space for both read and write cycles
+ //
+ MmioOr8 (
+ SpiBaseAddress + R_SPI_BCR,
+ B_SPI_BCR_BIOSWE
+ );
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ This function is a hook for Spi to enable BIOS Write Protect.
+
+ @param[in] None
+
+ @retval None
+
+**/
+VOID
+EFIAPI
+EnableBiosWriteProtect (
+ VOID
+ )
+{
+ UINTN SpiBaseAddress;
+ UINT32 Data32;
+
+ SpiBaseAddress = MmPciBase (
+ DEFAULT_PCI_BUS_NUMBER_SC,
+ PCI_DEVICE_NUMBER_SPI,
+ PCI_FUNCTION_NUMBER_SPI
+ );
+
+ //
+ // Clear BIOSWE bit (SPI PCI Offset DCh [0]) = 0b
+ // Disable the access to the BIOS space for write cycles
+ //
+ MmioAnd8 (
+ SpiBaseAddress + R_SPI_BCR,
+ (UINT8) (~N_SPI_BCR_BIOSWE)
+ );
+}
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpi.h b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpi.h new file mode 100644 index 0000000000..7b27974d06 --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpi.h @@ -0,0 +1,33 @@ +/** @file
+ Header file for the SC SPI SMM Driver.
+
+ Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SC_SPI_SMM_H_
+#define _SC_SPI_SMM_H_
+
+#include <Library/IoLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseLib.h>
+#include <Library/SmmServicesTableLib.h>
+#include <IndustryStandard/Pci30.h>
+#include <ScAccess.h>
+#include <Protocol/Spi.h>
+#include <Library/ScSpiCommonLib.h>
+#include <Library/MmPciLib.h>
+
+#endif
+
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpiSmm.inf b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpiSmm.inf new file mode 100644 index 0000000000..9c82067faa --- /dev/null +++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Spi/Smm/ScSpiSmm.inf @@ -0,0 +1,49 @@ +## @file
+# Component description file for SPI SMM driver.
+#
+# Copyright (c) 2008 - 2017, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ScSpiSmm
+ FILE_GUID = 27F4917B-A707-4aad-9676-26DF168CBF0D
+ MODULE_TYPE = DXE_SMM_DRIVER
+ VERSION_STRING = 1.0
+ PI_SPECIFICATION_VERSION = 0x0001000A
+ ENTRY_POINT = InstallScSpi
+
+[Sources]
+ ScSpi.h
+ ScSpi.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Silicon/BroxtonSiPkg/BroxtonSiPkg.dec
+ Silicon/BroxtonSiPkg/BroxtonSiPrivate.dec
+
+[LibraryClasses]
+ DebugLib
+ IoLib
+ UefiDriverEntryPoint
+ UefiBootServicesTableLib
+ BaseLib
+ SmmServicesTableLib
+ ScSpiCommonLib
+ MmPciLib
+
+[Protocols]
+ gScSmmSpiProtocolGuid ## PRODUCES
+
+[Depex]
+ TRUE
+
|