diff options
Diffstat (limited to 'Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c')
| -rw-r--r-- | Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c | 2313 |
1 files changed, 2313 insertions, 0 deletions
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c new file mode 100644 index 0000000000..03edcf1e17 --- /dev/null +++ b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c @@ -0,0 +1,2313 @@ +/**
+ * Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
+ * Copyright (c) 2016, Hisilicon Limited. All rights reserved.
+ * Copyright (c) 2016, Linaro Limited. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "PciHostBridge.h"
+#include <Library/DevicePathLib.h>
+#include <Library/DmaLib.h>
+#include <Library/PciExpressLib.h>
+#include <Regs/HisiPcieV1RegOffset.h>
+
+
+typedef struct {
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesp[TypeMax];
+ EFI_ACPI_END_TAG_DESCRIPTOR EndDesp;
+} RESOURCE_CONFIGURATION;
+
+RESOURCE_CONFIGURATION Configuration = {
+ {{0x8A, 0x2B, 1, 0, 0, 0, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 0, 32, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 6, 32, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 0, 64, 0, 0, 0, 0},
+ {0x8A, 0x2B, 0, 0, 6, 64, 0, 0, 0, 0},
+ {0x8A, 0x2B, 2, 0, 0, 0, 0, 0, 0, 0}},
+ {0x79, 0}
+};
+
+//
+// Protocol Member Function Prototypes
+//
+
+/**
+ Polls an address in memory mapped I/O space until an exit condition is met, or
+ a timeout occurs.
+
+ This function provides a standard way to poll a PCI memory location. A PCI memory read
+ operation is performed at the PCI memory address specified by Address for the width specified
+ by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
+ read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
+ Mask) is equal to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the memory operations. The caller is
+ responsible for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the memory address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPollMem (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINT64 Mask,
+ IN UINT64 Value,
+ IN UINT64 Delay,
+ OUT UINT64 *Result
+ );
+
+/**
+ Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
+ satisfied or after a defined duration.
+
+ This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
+ performed at the PCI I/O address specified by Address for the width specified by Width.
+ The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
+ repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
+ to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the I/O operations.
+ @param[in] Address The base address of the I/O operations. The caller is responsible
+ for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the I/O address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPollIo (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINT64 Mask,
+ IN UINT64 Value,
+ IN UINT64 Delay,
+ OUT UINT64 *Result
+ );
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoMemRead (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoMemWrite (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ );
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[out] UserBuffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoIoRead (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 UserAddress,
+ IN UINTN Count,
+ OUT VOID *UserBuffer
+ );
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[in] UserBuffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoIoWrite (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 UserAddress,
+ IN UINTN Count,
+ IN VOID *UserBuffer
+ );
+
+/**
+ Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
+ root bridge memory space.
+
+ The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
+ space to another region of PCI root bridge memory space. This is especially useful for video scroll
+ operation on a memory mapped video buffer.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI root bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] DestAddress The destination address of the memory operation. The caller is
+ responsible for aligning the DestAddress if required.
+ @param[in] SrcAddress The source address of the memory operation. The caller is
+ responsible for aligning the SrcAddress if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at DestAddress and SrcAddress.
+
+ @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoCopyMem (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 DestAddress,
+ IN UINT64 SrcAddress,
+ IN UINTN Count
+ );
+
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPciRead (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPciWrite (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ );
+
+/**
+ Provides the PCI controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ The Map() function provides the PCI controller specific addresses needed to access system
+ memory. This function is used to map system memory for PCI bus master DMA accesses.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Operation Indicates if the bus master is going to read or write to system memory.
+ @param[in] HostAddress The system memory address to map to the PCI controller.
+ @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
+ @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
+ to access the system memory's HostAddress.
+ @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_INVALID_PARAMETER Operation is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
+ @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
+ @retval EFI_INVALID_PARAMETER Mapping is NULL.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoMap (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ The Unmap() function completes the Map() operation and releases any corresponding resources.
+ If the operation was an EfiPciOperationBusMasterWrite or
+ EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
+ Any resources used for the mapping are freed.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+ @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
+ @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoUnmap (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN VOID *Mapping
+ );
+
+/**
+ Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
+ EfiPciOperationBusMasterCommonBuffer64 mapping.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range. Only
+ the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
+ and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_INVALID_PARAMETER MemoryType is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoAllocateBuffer (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ IN UINT64 Attributes
+ );
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+ was not allocated with AllocateBuffer().
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoFreeBuffer (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN UINTN Pages,
+ OUT VOID *HostAddress
+ );
+
+/**
+ Flushes all PCI posted write transactions from a PCI host bridge to system memory.
+
+ The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
+ memory. Posted write transactions are generated by PCI bus masters when they perform write
+ transactions to target addresses in system memory.
+ This function does not flush posted write transactions from any PCI bridges. A PCI controller
+ specific action must be taken to guarantee that the posted write transactions have been flushed from
+ the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
+ a PCI read transaction from the PCI controller prior to calling Flush().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+
+ @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
+ bridge to system memory.
+ @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
+ host bridge due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoFlush (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
+ );
+
+/**
+ Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
+ attributes that a PCI root bridge is currently using.
+
+ The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
+ and the mask of attributes that the PCI root bridge is currently using.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Supported A pointer to the mask of attributes that this PCI root bridge
+ supports setting with SetAttributes().
+ @param Attributes A pointer to the mask of attributes that this PCI root bridge is
+ currently using.
+
+ @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
+ bridge supports is returned in Supports. If Attributes is
+ not NULL, then the attributes that the PCI root bridge is currently
+ using is returned in Attributes.
+ @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoGetAttributes (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ OUT UINT64 *Supported,
+ OUT UINT64 *Attributes
+ );
+
+/**
+ Sets attributes for a resource range on a PCI root bridge.
+
+ The SetAttributes() function sets the attributes specified in Attributes for the PCI root
+ bridge on the resource range specified by ResourceBase and ResourceLength. Since the
+ granularity of setting these attributes may vary from resource type to resource type, and from
+ platform to platform, the actual resource range and the one passed in by the caller may differ. As a
+ result, this function may set the attributes specified by Attributes on a larger resource range
+ than the caller requested. The actual range is returned in ResourceBase and
+ ResourceLength. The caller is responsible for verifying that the actual range for which the
+ attributes were set is acceptable.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Attributes The mask of attributes to set. If the attribute bit
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
+ MEMORY_DISABLE is set, then the resource range is specified by
+ ResourceBase and ResourceLength. If
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
+ MEMORY_DISABLE are not set, then ResourceBase and
+ ResourceLength are ignored, and may be NULL.
+ @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
+ by the attributes specified by Attributes.
+ @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
+ attributes specified by Attributes.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoSetAttributes (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN UINT64 Attributes,
+ IN OUT UINT64 *ResourceBase,
+ IN OUT UINT64 *ResourceLength
+ );
+
+/**
+ Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
+ resource descriptors.
+
+ There are only two resource descriptor types from the ACPI Specification that may be used to
+ describe the current resources allocated to a PCI root bridge. These are the QWORD Address
+ Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
+ QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
+ or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
+ Address Space Descriptors followed by an End Tag.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
+ current configuration of this PCI root bridge. The storage for the
+ ACPI 2.0 resource descriptors is allocated by this function. The
+ caller must treat the return buffer as read-only data, and the buffer
+ must not be freed by the caller.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoConfiguration (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ OUT VOID **Resources
+ );
+
+//
+// Memory Controller Pci Root Bridge Io Module Variables
+//
+EFI_METRONOME_ARCH_PROTOCOL *mMetronome;
+
+//
+// Lookup table for increment values based on transfer widths
+//
+UINT8 mInStride[] = {
+ 1, // EfiPciWidthUint8
+ 2, // EfiPciWidthUint16
+ 4, // EfiPciWidthUint32
+ 8, // EfiPciWidthUint64
+ 0, // EfiPciWidthFifoUint8
+ 0, // EfiPciWidthFifoUint16
+ 0, // EfiPciWidthFifoUint32
+ 0, // EfiPciWidthFifoUint64
+ 1, // EfiPciWidthFillUint8
+ 2, // EfiPciWidthFillUint16
+ 4, // EfiPciWidthFillUint32
+ 8 // EfiPciWidthFillUint64
+};
+
+//
+// Lookup table for increment values based on transfer widths
+//
+UINT8 mOutStride[] = {
+ 1, // EfiPciWidthUint8
+ 2, // EfiPciWidthUint16
+ 4, // EfiPciWidthUint32
+ 8, // EfiPciWidthUint64
+ 1, // EfiPciWidthFifoUint8
+ 2, // EfiPciWidthFifoUint16
+ 4, // EfiPciWidthFifoUint32
+ 8, // EfiPciWidthFifoUint64
+ 0, // EfiPciWidthFillUint8
+ 0, // EfiPciWidthFillUint16
+ 0, // EfiPciWidthFillUint32
+ 0 // EfiPciWidthFillUint64
+};
+
+
+UINT64 GetPcieCfgAddress (
+ UINT64 Ecam,
+ UINTN Bus,
+ UINTN Device,
+ UINTN Function,
+ UINTN Reg
+ )
+{
+ return Ecam + PCI_EXPRESS_LIB_ADDRESS (Bus, Device, Function, Reg);
+}
+
+
+void SetAtuConfig0RW (
+ PCI_ROOT_BRIDGE_INSTANCE *Private,
+ UINT32 Index
+ )
+{
+ UINTN RbPciBase = Private->RbPciBar;
+ UINT64 MemLimit = GetPcieCfgAddress (Private->Ecam, Private->BusBase + 1, 1, 0, 0) - 1;
+
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(Private->Ecam));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)(Private->Ecam) >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_CONFIG0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_SHIIF_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+void SetAtuConfig1RW (
+ PCI_ROOT_BRIDGE_INSTANCE *Private,
+ UINT32 Index
+ )
+{
+ UINTN RbPciBase = Private->RbPciBar;
+ UINT64 MemLimit = GetPcieCfgAddress (Private->Ecam, Private->BusLimit + 1, 0, 0, 0) - 1;
+
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_CONFIG1);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(Private->Ecam));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)(Private->Ecam) >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_SHIIF_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+void SetAtuIoRW(UINT64 RbPciBase,UINT64 IoBase,UINT64 CpuIoRegionLimit, UINT64 CpuIoRegionBase, UINT32 Index)
+{
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_IO);
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(CpuIoRegionBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)CpuIoRegionBase >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32)(CpuIoRegionLimit));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, (UINT32)(IoBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, (UINT32)((UINT64)(IoBase) >> 32));
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_NORMAL_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+void SetAtuMemRW(UINT64 RbPciBase,UINT64 MemBase,UINT64 CpuMemRegionLimit, UINT64 CpuMemRegionBase, UINT32 Index)
+{
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_MEM);
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(CpuMemRegionBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)(CpuMemRegionBase) >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32)(CpuMemRegionLimit));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, (UINT32)(MemBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, (UINT32)((UINT64)(MemBase) >> 32));
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_NORMAL_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+VOID InitAtu (PCI_ROOT_BRIDGE_INSTANCE *Private)
+{
+ SetAtuMemRW (Private->RbPciBar, Private->PciRegionBase, Private->PciRegionLimit, Private->CpuMemRegionBase, 0);
+ SetAtuConfig0RW (Private, 1);
+ SetAtuConfig1RW (Private, 2);
+ SetAtuIoRW (Private->RbPciBar, Private->IoBase, Private->IoLimit, Private->CpuIoRegionBase, 3);
+}
+
+
+BOOLEAN PcieIsLinkUp (UINT32 SocType, UINTN RbPciBar, UINTN Port)
+{
+ UINT32 Value = 0;
+
+ if (0x1610 == SocType)
+ {
+ Value = MmioRead32(RbPciBar + 0x131C);
+ if ((Value & 0x3F) == 0x11)
+ {
+ return TRUE;
+ }
+ return FALSE;
+ }
+ else
+ {
+ Value = MmioRead32 (0xb0000000 + 0x6818 + 0x100 * Port);
+ if ((Value & 0x3F) == 0x11)
+ {
+ return TRUE;
+ }
+ return FALSE;
+ }
+}
+
+/**
+
+ Construct the Pci Root Bridge Io protocol
+
+ @param Protocol Point to protocol instance
+ @param HostBridgeHandle Handle of host bridge
+ @param Attri Attribute of host bridge
+ @param ResAppeture ResourceAppeture for host bridge
+
+ @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
+
+**/
+EFI_STATUS
+RootBridgeConstructor (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
+ IN EFI_HANDLE HostBridgeHandle,
+ IN UINT64 Attri,
+ IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture,
+ IN UINT32 Seg
+ )
+{
+ EFI_STATUS Status;
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+ PCI_RESOURCE_TYPE Index;
+
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (Protocol);
+
+ //
+ // The host to pci bridge, the host memory and io addresses are
+ // direct mapped to pci addresses, so no need translate, set bases to 0.
+ //
+ PrivateData->MemBase = ResAppeture->MemBase;
+ PrivateData->IoBase = ResAppeture->IoBase;
+ PrivateData->RbPciBar = ResAppeture->RbPciBar;
+ PrivateData->MemLimit = ResAppeture->MemLimit;
+ PrivateData->IoLimit = ResAppeture->IoLimit;
+ PrivateData->Ecam = ResAppeture->Ecam;
+ PrivateData->CpuMemRegionBase = ResAppeture->CpuMemRegionBase;
+ PrivateData->CpuIoRegionBase = ResAppeture->CpuIoRegionBase;
+ PrivateData->PciRegionBase = ResAppeture->PciRegionBase;
+ PrivateData->PciRegionLimit = ResAppeture->PciRegionLimit;
+
+ //
+ // Bus Appeture for this Root Bridge (Possible Range)
+ //
+ PrivateData->BusBase = ResAppeture->BusBase;
+ PrivateData->BusLimit = ResAppeture->BusLimit;
+
+ //
+ // Specific for this chipset
+ //
+ for (Index = TypeIo; Index < TypeMax; Index++) {
+ PrivateData->ResAllocNode[Index].Type = Index;
+ PrivateData->ResAllocNode[Index].Base = 0;
+ PrivateData->ResAllocNode[Index].Length = 0;
+ PrivateData->ResAllocNode[Index].Status = ResNone;
+ }
+
+ PrivateData->RootBridgeAttrib = Attri;
+
+ PrivateData->Supports = EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | \
+ EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | \
+ EFI_PCI_ATTRIBUTE_VGA_MEMORY | \
+ EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16 | \
+ EFI_PCI_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER;
+ PrivateData->Attributes = PrivateData->Supports;
+
+ Protocol->ParentHandle = HostBridgeHandle;
+
+ Protocol->PollMem = RootBridgeIoPollMem;
+ Protocol->PollIo = RootBridgeIoPollIo;
+
+ Protocol->Mem.Read = RootBridgeIoMemRead;
+ Protocol->Mem.Write = RootBridgeIoMemWrite;
+
+ Protocol->Io.Read = RootBridgeIoIoRead;
+ Protocol->Io.Write = RootBridgeIoIoWrite;
+
+ Protocol->CopyMem = RootBridgeIoCopyMem;
+
+ Protocol->Pci.Read = RootBridgeIoPciRead;
+ Protocol->Pci.Write = RootBridgeIoPciWrite;
+
+ Protocol->Map = RootBridgeIoMap;
+ Protocol->Unmap = RootBridgeIoUnmap;
+
+ Protocol->AllocateBuffer = RootBridgeIoAllocateBuffer;
+ Protocol->FreeBuffer = RootBridgeIoFreeBuffer;
+
+ Protocol->Flush = RootBridgeIoFlush;
+
+ Protocol->GetAttributes = RootBridgeIoGetAttributes;
+ Protocol->SetAttributes = RootBridgeIoSetAttributes;
+
+ Protocol->Configuration = RootBridgeIoConfiguration;
+
+ Protocol->SegmentNumber = Seg;
+
+ InitAtu (PrivateData);
+
+ Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **)&mMetronome);
+ if (EFI_ERROR(Status))
+ {
+ DEBUG((EFI_D_ERROR,"LocateProtocol MetronomeArchProtocol Error\n"));
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] OperationType I/O operation type: IO/MMIO/PCI.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The parameters for this request pass the checks.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+RootBridgeIoCheckParameter (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN OPERATION_TYPE OperationType,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr;
+ UINT64 MaxCount;
+ UINT64 Base;
+ UINT64 Limit;
+
+ //
+ // Check to see if Buffer is NULL
+ //
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Width is in the valid range
+ //
+ if ((UINT32)Width >= EfiPciWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For FIFO type, the target address won't increase during the access,
+ // so treat Count as 1
+ //
+ if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) {
+ Count = 1;
+ }
+
+ //
+ // Check to see if Width is in the valid range for I/O Port operations
+ //
+ Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ if ((OperationType != MemOperation) && (Width == EfiPciWidthUint64)) {
+ ASSERT (FALSE);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Address is aligned
+ //
+ if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
+
+ //
+ // Check to see if any address associated with this transfer exceeds the maximum
+ // allowed address. The maximum address implied by the parameters passed in is
+ // Address + Size * Count. If the following condition is met, then the transfer
+ // is not supported.
+ //
+ // Address + Size * Count > Limit + 1
+ //
+ // Since Limit can be the maximum integer value supported by the CPU and Count
+ // can also be the maximum integer value supported by the CPU, this range
+ // check must be adjusted to avoid all oveflow conditions.
+ //
+ // The following form of the range check is equivalent but assumes that
+ // Limit is of the form (2^n - 1).
+ //
+ if (OperationType == IoOperation) {
+ Base = PrivateData->IoBase;
+ Limit = PrivateData->IoLimit;
+ } else if (OperationType == MemOperation) {
+ Base = PrivateData->MemBase;
+ Limit = PrivateData->MemLimit;
+ } else {
+ PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address;
+ if (PciRbAddr->Bus < PrivateData->BusBase || PciRbAddr->Bus > PrivateData->BusLimit) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ /* The root complex has only one device / function */
+ if (PciRbAddr->Bus == PrivateData->BusBase && PciRbAddr->Device != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ /* The other side of the RC has only one device as well */
+ if (PciRbAddr->Bus == (PrivateData->BusBase + 1 ) && PciRbAddr->Device != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (PciRbAddr->Device > MAX_PCI_DEVICE_NUMBER || PciRbAddr->Function > MAX_PCI_FUNCTION_NUMBER) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (PciRbAddr->ExtendedRegister != 0) {
+ Address = PciRbAddr->ExtendedRegister;
+ } else {
+ Address = PciRbAddr->Register;
+ }
+ Base = 0;
+ Limit = MAX_PCI_REG_ADDRESS;
+ }
+
+ if (Address < Base) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Count == 0) {
+ if (Address > Limit) {
+ return EFI_UNSUPPORTED;
+ }
+ } else {
+ MaxCount = RShiftU64 (Limit, Width);
+ if (MaxCount < (Count - 1)) {
+ return EFI_UNSUPPORTED;
+ }
+ if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Internal help function for read and write memory space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Write Switch value for Read or Write.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+RootBridgeIoMemRW (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN BOOLEAN Write,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
+ /* Address is bus resource */
+ Address -= PrivateData->PciRegionBase;
+ Address += PrivateData->CpuMemRegionBase;
+
+ PCIE_DEBUG("RootBridgeIoMemRW Address:0x%llx\n", Address);
+ PCIE_DEBUG("RootBridgeIoMemRW Count:0x%llx\n", Count);
+ PCIE_DEBUG("RootBridgeIoMemRW Write:0x%llx\n", Write);
+ PCIE_DEBUG("RootBridgeIoMemRW Width:0x%llx\n", Width);
+
+ Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (Write) {
+ switch (OperationWidth) {
+ case EfiPciWidthUint8:
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ break;
+ case EfiPciWidthUint16:
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ break;
+ case EfiPciWidthUint32:
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ break;
+ case EfiPciWidthUint64:
+ MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
+ break;
+ default:
+ //
+ // The RootBridgeIoCheckParameter call above will ensure that this
+ // path is not taken.
+ //
+ ASSERT (FALSE);
+ break;
+ }
+ } else {
+ switch (OperationWidth) {
+ case EfiPciWidthUint8:
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ break;
+ case EfiPciWidthUint16:
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ break;
+ case EfiPciWidthUint32:
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ break;
+ case EfiPciWidthUint64:
+ *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
+ break;
+ default:
+ //
+ // The RootBridgeIoCheckParameter call above will ensure that this
+ // path is not taken.
+ //
+ ASSERT (FALSE);
+ break;
+ }
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Internal help function for read and write IO space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Write Switch value for Read or Write.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+RootBridgeIoIoRW (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN BOOLEAN Write,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
+ /* Address is bus resource */
+ Address -= PrivateData->IoBase;
+ Address += PrivateData->CpuIoRegionBase;
+
+ Status = RootBridgeIoCheckParameter (This, IoOperation, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
+
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (Write) {
+ switch (OperationWidth) {
+ case EfiPciWidthUint8:
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ break;
+ case EfiPciWidthUint16:
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ break;
+ case EfiPciWidthUint32:
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ break;
+ case EfiPciWidthUint64:
+ MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
+ break;
+ default:
+ //
+ // The RootBridgeIoCheckParameter call above will ensure that this
+ // path is not taken.
+ //
+ ASSERT (FALSE);
+ break;
+ }
+ } else {
+ switch (OperationWidth) {
+ case EfiPciWidthUint8:
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ break;
+ case EfiPciWidthUint16:
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ break;
+ case EfiPciWidthUint32:
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ break;
+ case EfiPciWidthUint64:
+ *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
+ break;
+ default:
+ //
+ // The RootBridgeIoCheckParameter call above will ensure that this
+ // path is not taken.
+ //
+ ASSERT (FALSE);
+ break;
+ }
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Polls an address in memory mapped I/O space until an exit condition is met, or
+ a timeout occurs.
+
+ This function provides a standard way to poll a PCI memory location. A PCI memory read
+ operation is performed at the PCI memory address specified by Address for the width specified
+ by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
+ read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
+ Mask) is equal to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the memory operations. The caller is
+ responsible for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the memory address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPollMem (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINT64 Mask,
+ IN UINT64 Value,
+ IN UINT64 Delay,
+ OUT UINT64 *Result
+ )
+{
+ EFI_STATUS Status;
+ UINT64 NumberOfTicks;
+ UINT32 Remainder;
+
+ if (Result == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // No matter what, always do a single poll.
+ //
+ Status = This->Mem.Read (This, Width, Address, 1, Result);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if ((*Result & Mask) == Value) {
+ return EFI_SUCCESS;
+ }
+
+ if (Delay == 0) {
+ return EFI_TIMEOUT;
+
+ } else {
+
+ //
+ // Determine the proper # of metronome ticks to wait for polling the
+ // location. The nuber of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
+ // The "+1" to account for the possibility of the first tick being short
+ // because we started in the middle of a tick.
+ //
+ // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome
+ // protocol definition is updated.
+ //
+ NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, &Remainder);
+ if (Remainder != 0) {
+ NumberOfTicks += 1;
+ }
+ NumberOfTicks += 1;
+
+ while (NumberOfTicks != 0) {
+
+ mMetronome->WaitForTick (mMetronome, 1);
+
+ Status = This->Mem.Read (This, Width, Address, 1, Result);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if ((*Result & Mask) == Value) {
+ return EFI_SUCCESS;
+ }
+
+ NumberOfTicks -= 1;
+ }
+ }
+ return EFI_TIMEOUT;
+}
+
+/**
+ Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
+ satisfied or after a defined duration.
+
+ This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
+ performed at the PCI I/O address specified by Address for the width specified by Width.
+ The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
+ repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
+ to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the I/O operations.
+ @param[in] Address The base address of the I/O operations. The caller is responsible
+ for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the I/O address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPollIo (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINT64 Mask,
+ IN UINT64 Value,
+ IN UINT64 Delay,
+ OUT UINT64 *Result
+ )
+{
+ EFI_STATUS Status;
+ UINT64 NumberOfTicks;
+ UINT32 Remainder;
+
+ //
+ // No matter what, always do a single poll.
+ //
+
+ if (Result == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = This->Io.Read (This, Width, Address, 1, Result);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if ((*Result & Mask) == Value) {
+ return EFI_SUCCESS;
+ }
+
+ if (Delay == 0) {
+ return EFI_SUCCESS;
+
+ } else {
+
+ //
+ // Determine the proper # of metronome ticks to wait for polling the
+ // location. The number of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
+ // The "+1" to account for the possibility of the first tick being short
+ // because we started in the middle of a tick.
+ //
+ NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, &Remainder);
+ if (Remainder != 0) {
+ NumberOfTicks += 1;
+ }
+ NumberOfTicks += 1;
+
+ while (NumberOfTicks != 0) {
+
+ mMetronome->WaitForTick (mMetronome, 1);
+
+ Status = This->Io.Read (This, Width, Address, 1, Result);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if ((*Result & Mask) == Value) {
+ return EFI_SUCCESS;
+ }
+
+ NumberOfTicks -= 1;
+ }
+ }
+ return EFI_TIMEOUT;
+}
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoMemRead (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ return RootBridgeIoMemRW (This, FALSE, Width, Address, Count, Buffer);
+}
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoMemWrite (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ return RootBridgeIoMemRW (This, TRUE, Width, Address, Count, Buffer);
+}
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoIoRead (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ return RootBridgeIoIoRW (This, FALSE, Width, Address, Count, Buffer);
+}
+
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoIoWrite (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ return RootBridgeIoIoRW (This, TRUE, Width, Address, Count, Buffer);
+}
+
+/**
+ Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
+ root bridge memory space.
+
+ The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
+ space to another region of PCI root bridge memory space. This is especially useful for video scroll
+ operation on a memory mapped video buffer.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI root bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] DestAddress The destination address of the memory operation. The caller is
+ responsible for aligning the DestAddress if required.
+ @param[in] SrcAddress The source address of the memory operation. The caller is
+ responsible for aligning the SrcAddress if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at DestAddress and SrcAddress.
+
+ @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoCopyMem (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 DestAddress,
+ IN UINT64 SrcAddress,
+ IN UINTN Count
+ )
+{
+ EFI_STATUS Status;
+ BOOLEAN Direction;
+ UINTN Stride;
+ UINTN Index;
+ UINT64 Result;
+
+ if ((UINT32)Width > EfiPciWidthUint64) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (DestAddress == SrcAddress) {
+ return EFI_SUCCESS;
+ }
+
+ Stride = (UINTN)((UINTN)1 << Width);
+
+ Direction = TRUE;
+ if ((DestAddress > SrcAddress) && (DestAddress < (SrcAddress + Count * Stride))) {
+ Direction = FALSE;
+ SrcAddress = SrcAddress + (Count-1) * Stride;
+ DestAddress = DestAddress + (Count-1) * Stride;
+ }
+
+ for (Index = 0;Index < Count;Index++) {
+ Status = RootBridgeIoMemRead (
+ This,
+ Width,
+ SrcAddress,
+ 1,
+ &Result
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = RootBridgeIoMemWrite (
+ This,
+ Width,
+ DestAddress,
+ 1,
+ &Result
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (Direction) {
+ SrcAddress += Stride;
+ DestAddress += Stride;
+ } else {
+ SrcAddress -= Stride;
+ DestAddress -= Stride;
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads memory-mapped registers.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+CpuMemoryServiceRead (
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+ UINT32 Uint32Buffer = 0;
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
+ Uint32Buffer &= (0xFF << ((Address & 0x3) * 8));
+ *((UINT8*)Uint8Buffer) = (UINT8)(Uint32Buffer >> (((Address & 0x3) * 8)));
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
+ Uint32Buffer &= (0xFFFF << ((Address & 0x3) * 8));
+ *(UINT16 *)Uint8Buffer = (UINT16)(Uint32Buffer >> (((Address & 0x3) * 8)));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPciRead (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 EfiAddress,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ UINT32 Offset;
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress;
+ UINT64 Address;
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+
+ EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress;
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
+
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Width >= EfiPciWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (EfiPciAddress->ExtendedRegister) {
+ Offset = EfiPciAddress->ExtendedRegister;
+ } else {
+ Offset = EfiPciAddress->Register;
+ }
+
+ PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__,
+ EfiPciAddress->Bus,
+ EfiPciAddress->Device,
+ EfiPciAddress->Function,
+ Offset
+ );
+ if (EfiPciAddress->Bus < PrivateData->BusBase || EfiPciAddress->Bus > PrivateData->BusLimit) {
+ PCIE_DEBUG ("[%a:%d] - Bus number out of range %d\n", __FUNCTION__, __LINE__, EfiPciAddress->Bus);
+ SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // The UEFI PCI enumerator scans for devices at all possible addresses,
+ // and ignores some PCI rules - this results in some hardware being
+ // detected multiple times. We work around this by faking absent
+ // devices
+ if(EfiPciAddress->Bus == PrivateData->BusBase)
+ {
+ if((EfiPciAddress->Device != 0x0) || (EfiPciAddress->Function != 0)) {
+ SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ if (EfiPciAddress->Bus == PrivateData->BusBase){
+ Address = PrivateData->RbPciBar + Offset;
+ }
+ else if(EfiPciAddress->Bus == PrivateData->BusBase + 1)
+ {
+ if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port))
+ {
+ SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
+ return EFI_NOT_READY;
+ }
+ Address = GetPcieCfgAddress (
+ PrivateData->Ecam,
+ EfiPciAddress->Bus,
+ EfiPciAddress->Device,
+ EfiPciAddress->Function,
+ Offset
+ );
+ }
+ else
+ {
+ Address = GetPcieCfgAddress (
+ PrivateData->Ecam,
+ EfiPciAddress->Bus,
+ EfiPciAddress->Device,
+ EfiPciAddress->Function,
+ Offset
+ );
+ }
+
+ (VOID)CpuMemoryServiceRead((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer);
+ PCIE_DEBUG ("[%a:%d] - %x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Writes memory-mapped registers.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+CpuMemoryServiceWrite (
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+ UINT32 Uint32Buffer;
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03)));
+ Uint32Buffer &= ~(UINT32)(0xFF << ((Address & 0x3) * 8));
+ Uint32Buffer |= (UINT32)(*(UINT8 *)Uint8Buffer) << ((Address & 0x3) * 8);
+ MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03)));
+ Uint32Buffer &= ~(UINT32)(0xFFFF << ((Address & 0x3) * 8));
+ Uint32Buffer |= (UINT32)(*(UINT16 *)Uint8Buffer) << ((Address & 0x3) * 8);
+ MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoPciWrite (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 EfiAddress,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ UINT32 Offset;
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress;
+ UINT64 Address;
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+
+ EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress;
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
+
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Width >= EfiPciWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (EfiPciAddress->ExtendedRegister)
+ Offset = EfiPciAddress->ExtendedRegister;
+ else
+ Offset = EfiPciAddress->Register;
+
+ PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__,
+ EfiPciAddress->Bus,
+ EfiPciAddress->Device,
+ EfiPciAddress->Function,
+ Offset
+ );
+ if (((EfiPciAddress->Bus == PrivateData->BusBase) && (EfiPciAddress->Device == 0x00) && (EfiPciAddress->Function == 0))){
+ Address = PrivateData->RbPciBar + Offset;
+ if ((Offset == 0x14) || (Offset == 0x10)) {
+ return EFI_SUCCESS;
+ }
+ }
+ else if (EfiPciAddress->Bus == PrivateData->BusBase + 1)
+ {
+ if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port)) {
+ return EFI_NOT_READY;
+ }
+ Address = GetPcieCfgAddress (
+ PrivateData->Ecam,
+ EfiPciAddress->Bus,
+ EfiPciAddress->Device,
+ EfiPciAddress->Function,
+ Offset
+ );
+ }
+ else
+ {
+ Address = GetPcieCfgAddress (
+ PrivateData->Ecam,
+ EfiPciAddress->Bus,
+ EfiPciAddress->Device,
+ EfiPciAddress->Function,
+ Offset
+ );
+ }
+
+ (VOID)CpuMemoryServiceWrite ((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer);
+ PCIE_DEBUG ("[%a:%d] - 0x%08x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer);
+ return EFI_SUCCESS;
+}
+
+/**
+ Provides the PCI controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ The Map() function provides the PCI controller specific addresses needed to access system
+ memory. This function is used to map system memory for PCI bus master DMA accesses.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Operation Indicates if the bus master is going to read or write to system memory.
+ @param[in] HostAddress The system memory address to map to the PCI controller.
+ @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
+ @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
+ to access the system memory's HostAddress.
+ @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_INVALID_PARAMETER Operation is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
+ @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
+ @retval EFI_INVALID_PARAMETER Mapping is NULL.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoMap (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ DMA_MAP_OPERATION DmaOperation;
+
+ if (Operation == EfiPciOperationBusMasterRead) {
+ DmaOperation = MapOperationBusMasterRead;
+ } else if (Operation == EfiPciOperationBusMasterWrite) {
+ DmaOperation = MapOperationBusMasterWrite;
+ } else if (Operation == EfiPciOperationBusMasterCommonBuffer) {
+ DmaOperation = MapOperationBusMasterCommonBuffer;
+ } else if (Operation == EfiPciOperationBusMasterRead64) {
+ DmaOperation = MapOperationBusMasterRead;
+ } else if (Operation == EfiPciOperationBusMasterWrite64) {
+ DmaOperation = MapOperationBusMasterWrite;
+ } else if (Operation == EfiPciOperationBusMasterCommonBuffer64) {
+ DmaOperation = MapOperationBusMasterCommonBuffer;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+ (VOID)DmaMap (DmaOperation, HostAddress, NumberOfBytes, DeviceAddress, Mapping);
+ return EFI_SUCCESS;
+}
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ The Unmap() function completes the Map() operation and releases any corresponding resources.
+ If the operation was an EfiPciOperationBusMasterWrite or
+ EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
+ Any resources used for the mapping are freed.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+ @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
+ @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoUnmap (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN VOID *Mapping
+ )
+{
+ return DmaUnmap (Mapping);
+}
+
+/**
+ Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
+ EfiPciOperationBusMasterCommonBuffer64 mapping.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range. Only
+ the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
+ and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_INVALID_PARAMETER MemoryType is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoAllocateBuffer (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ IN UINT64 Attributes
+ )
+{
+ if (Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return DmaAllocateBuffer (MemoryType, Pages, HostAddress);
+
+}
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+ was not allocated with AllocateBuffer().
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoFreeBuffer (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN UINTN Pages,
+ OUT VOID *HostAddress
+ )
+{
+ return DmaFreeBuffer (Pages, HostAddress);
+}
+
+/**
+ Flushes all PCI posted write transactions from a PCI host bridge to system memory.
+
+ The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
+ memory. Posted write transactions are generated by PCI bus masters when they perform write
+ transactions to target addresses in system memory.
+ This function does not flush posted write transactions from any PCI bridges. A PCI controller
+ specific action must be taken to guarantee that the posted write transactions have been flushed from
+ the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
+ a PCI read transaction from the PCI controller prior to calling Flush().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+
+ @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
+ bridge to system memory.
+ @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
+ host bridge due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoFlush (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
+ )
+{
+ //
+ // not supported yet
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
+ attributes that a PCI root bridge is currently using.
+
+ The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
+ and the mask of attributes that the PCI root bridge is currently using.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Supported A pointer to the mask of attributes that this PCI root bridge
+ supports setting with SetAttributes().
+ @param Attributes A pointer to the mask of attributes that this PCI root bridge is
+ currently using.
+
+ @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
+ bridge supports is returned in Supports. If Attributes is
+ not NULL, then the attributes that the PCI root bridge is currently
+ using is returned in Attributes.
+ @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoGetAttributes (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ OUT UINT64 *Supported,
+ OUT UINT64 *Attributes
+ )
+{
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
+
+ if (Attributes == NULL && Supported == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Set the return value for Supported and Attributes
+ //
+ if (Supported != NULL) {
+ *Supported = PrivateData->Supports;
+ }
+
+ if (Attributes != NULL) {
+ *Attributes = PrivateData->Attributes;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sets attributes for a resource range on a PCI root bridge.
+
+ The SetAttributes() function sets the attributes specified in Attributes for the PCI root
+ bridge on the resource range specified by ResourceBase and ResourceLength. Since the
+ granularity of setting these attributes may vary from resource type to resource type, and from
+ platform to platform, the actual resource range and the one passed in by the caller may differ. As a
+ result, this function may set the attributes specified by Attributes on a larger resource range
+ than the caller requested. The actual range is returned in ResourceBase and
+ ResourceLength. The caller is responsible for verifying that the actual range for which the
+ attributes were set is acceptable.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Attributes The mask of attributes to set. If the attribute bit
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
+ MEMORY_DISABLE is set, then the resource range is specified by
+ ResourceBase and ResourceLength. If
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
+ MEMORY_DISABLE are not set, then ResourceBase and
+ ResourceLength are ignored, and may be NULL.
+ @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
+ by the attributes specified by Attributes.
+ @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
+ attributes specified by Attributes.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoSetAttributes (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ IN UINT64 Attributes,
+ IN OUT UINT64 *ResourceBase,
+ IN OUT UINT64 *ResourceLength
+ )
+{
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
+
+ if (Attributes != 0) {
+ if ((Attributes & (~(PrivateData->Supports))) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ //
+ // This is a generic driver for a PC-AT class system. It does not have any
+ // chipset specific knowlegde, so none of the attributes can be set or
+ // cleared. Any attempt to set attribute that are already set will succeed,
+ // and any attempt to set an attribute that is not supported will fail.
+ //
+ if (Attributes & (~PrivateData->Attributes)) {
+ /* FIXME: */
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
+ resource descriptors.
+
+ There are only two resource descriptor types from the ACPI Specification that may be used to
+ describe the current resources allocated to a PCI root bridge. These are the QWORD Address
+ Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
+ QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
+ or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
+ Address Space Descriptors followed by an End Tag.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
+ current configuration of this PCI root bridge. The storage for the
+ ACPI 2.0 resource descriptors is allocated by this function. The
+ caller must treat the return buffer as read-only data, and the buffer
+ must not be freed by the caller.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
+EFI_STATUS
+EFIAPI
+RootBridgeIoConfiguration (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
+ OUT VOID **Resources
+ )
+{
+ PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
+ UINTN Index;
+
+ PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
+ for (Index = 0; Index < TypeMax; Index++) {
+ if (PrivateData->ResAllocNode[Index].Status == ResAllocated) {
+ Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base;
+ Configuration.SpaceDesp[Index].AddrRangeMax = PrivateData->ResAllocNode[Index].Base + PrivateData->ResAllocNode[Index].Length - 1;
+ Configuration.SpaceDesp[Index].AddrLen = PrivateData->ResAllocNode[Index].Length;
+ }
+ }
+
+ *Resources = &Configuration;
+ return EFI_SUCCESS;
+}
+
|