1 files changed, 131 insertions, 0 deletions
diff --git a/Silicon/Hisilicon/Hi1610/Include/Library/SerdesLib.h b/Silicon/Hisilicon/Hi1610/Include/Library/SerdesLib.h
new file mode 100755
index 0000000000..077dd5edc8
--- /dev/null
+++ b/Silicon/Hisilicon/Hi1610/Include/Library/SerdesLib.h
@@ -0,0 +1,131 @@
+/** @file
+*
+*  Copyright (c) 2016, Hisilicon Limited. All rights reserved.
+*  Copyright (c) 2016, Linaro Limited. All rights reserved.
+*
+*  This program and the accompanying materials
+*  are licensed and made available under the terms and conditions of the BSD License
+*  which accompanies this distribution.  The full text of the license may be found at
+*  http://opensource.org/licenses/bsd-license.php
+*
+*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef _SERDES_LIB_H_
+#define _SERDES_LIB_H_
+
+typedef enum {
+  EmHilink0Hccs1X8 = 0,
+  EmHilink0Pcie1X8 = 2,
+  EmHilink0Pcie1X4Pcie2X4 = 3,
+  EmHilink0Sas2X8 = 4,
+  EmHilink0Hccs1X8Width16,
+  EmHilink0Hccs1X8Width32,
+} HILINK0_MODE_TYPE;
+
+typedef enum {
+  EmHilink1Sas2X1 = 0,
+  EmHilink1Hccs0X8 = 1,
+  EmHilink1Pcie0X8 = 2,
+  EmHilink1Hccs0X8Width16,
+  EmHilink1Hccs0X8Width32,
+} HILINK1_MODE_TYPE;
+
+typedef enum {
+  EmHilink2Pcie2X8 = 0,
+  EmHilink2Sas0X8 = 2,
+} HILINK2_MODE_TYPE;
+
+typedef enum {
+  EmHilink5Pcie3X4 = 0,
+  EmHilink5Pcie2X2Pcie3X2 = 1,
+  EmHilink5Sas1X4 = 2,
+} HILINK5_MODE_TYPE;
+
+typedef enum {
+  Em32coreEvbBoard = 0,
+  Em16coreEvbBoard = 1,
+  EmV2R1CO5Borad = 2,
+  EmOtherBorad
+} BOARD_TYPE;
+
+
+typedef struct {
+  HILINK0_MODE_TYPE Hilink0Mode;
+  HILINK1_MODE_TYPE Hilink1Mode;
+  HILINK2_MODE_TYPE Hilink2Mode;
+  UINT32 Hilink3Mode;
+  UINT32 Hilink4Mode;
+  HILINK5_MODE_TYPE Hilink5Mode;
+  UINT32 Hilink6Mode;
+  UINT32 UseSsc;
+} SERDES_PARAM;
+
+
+#define SERDES_INVALID_MACRO_ID  0xFFFFFFFF
+#define SERDES_INVALID_LANE_NUM  0xFFFFFFFF
+#define SERDES_INVALID_RATE_MODE  0xFFFFFFFF
+
+typedef struct {
+  UINT32 MacroId;
+  UINT32 DsNum;
+  UINT32 DsCfg;
+} SERDES_POLARITY_INVERT;
+
+EFI_STATUS OemGetSerdesParam (SERDES_PARAM *ParamA, SERDES_PARAM *ParamB, UINT32 SocketId);
+extern SERDES_POLARITY_INVERT gSerdesPolarityTxDesc[];
+extern SERDES_POLARITY_INVERT gSerdesPolarityRxDesc[];
+UINT32 GetEthType(UINT8 EthChannel);
+
+EFI_STATUS
+EfiSerdesInitWrap (VOID);
+
+void SRE_SerdesEnableCTLEDFE(UINT32 macro, UINT32 lane, UINT32 ulDsCfg);
+
+//EYE test
+UINT32 serdes_eye_test(UINT32 uwMacroId, UINT32 uwDsNum, UINT32 eyemode, UINT32 scanwindowvalue, UINT32 uwRateData);
+
+UINT32 Serdes_ReadBert(UINT32   ulMacroId , UINT32   ulDsNum);
+
+//PRBS test
+int serdes_prbs_test(UINT8 macro, UINT8 lane, UINT8 prbstype);
+
+int serdes_prbs_test_cancle(UINT8 macro,UINT8 lane);
+
+//CTLE/DFE
+void serdes_ctle_adaptation_close(UINT32 macro,UINT32 lane);
+
+void serdes_ctle_adaptation_open(UINT32 macro,UINT32 lane);
+
+void serdes_dfe_adaptation_close(UINT32 macro,UINT32 lane);
+
+void serdes_dfe_adaptation_open(UINT32 macro,UINT32 lane);
+
+void serdes_ctle_dfe_reset(UINT32 macro,UINT32 lane);
+//int serdes_reset(UINT32 macro);
+//int serdes_release_reset(UINT32 macro);
+void Custom_Wave(UINT32 macro,UINT32 lane,UINT32 mode);
+void serdes_ffe_show(UINT32 macro,UINT32 lane);
+void serdes_dfe_show(UINT32 macro,UINT32 lane);
+int  serdes_read_bert(UINT8 macro, UINT8 lane);
+void  serdes_clean_bert(UINT8 macro, UINT8 lane);
+int  serdes_get_four_point_eye_diagram(UINT32 macro, UINT32 lane,UINT32 eyemode, UINT32 data_rate);
+void serdes_release_mcu(UINT32 macro,UINT32 val);
+int hilink_write(UINT32 macro, UINT32 reg, UINT32 value);
+int hilink_read(UINT32 macro, UINT32 reg, UINT32 *value);
+int serdes_tx_to_rx_parallel_loopback(UINT8 macro,UINT8 lane,UINT8 val);//TXRXPARLPBKEN
+int serdes_rx_to_tx_parallel_loopback(UINT8 macro,UINT8 lane,UINT8 val);
+int serdes_tx_to_rx_serial_loopback(UINT8 macro,UINT8 lane,UINT8 val);
+void serdes_ctle_show(UINT32 macro,UINT32 lane);
+int serdes_cs_write(UINT32 macro,UINT32 cs_num,UINT32 reg_num,UINT32 bit_high,UINT32 bit_low,UINT32 value);
+UINT32 serdes_cs_read(UINT32 macro,UINT32 cs_num,UINT32 reg_num);
+int serdes_ds_write(UINT32 macro,UINT32 ds_num,UINT32 ds_index,UINT32 reg_num,UINT32 bit_high,UINT32 bit_low,UINT32 value);
+int serdes_ds_read(UINT32 macro,UINT32 ds_num,UINT32 ds_index,UINT32 reg_num);
+int report_serdes_mux(void);
+int serdes_key_reg_show(UINT32 macro);
+void serdes_state_show(UINT32 macro);
+UINT32 Serdes_ReadBert(UINT32   ulMacroId , UINT32   ulDsNum);
+
+#endif