diff options
Diffstat (limited to 'Silicon/Intel/LewisburgPkg/Library/SmmSpiFlashCommonLib/SpiFlashCommon.c')
| -rw-r--r-- | Silicon/Intel/LewisburgPkg/Library/SmmSpiFlashCommonLib/SpiFlashCommon.c | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/Silicon/Intel/LewisburgPkg/Library/SmmSpiFlashCommonLib/SpiFlashCommon.c b/Silicon/Intel/LewisburgPkg/Library/SmmSpiFlashCommonLib/SpiFlashCommon.c new file mode 100644 index 0000000000..9d1e3fb60e --- /dev/null +++ b/Silicon/Intel/LewisburgPkg/Library/SmmSpiFlashCommonLib/SpiFlashCommon.c @@ -0,0 +1,198 @@ +/** @file
+
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed and made available under
+the terms and conditions of the BSD License that accompanies this distribution.
+The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php.
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Library/SpiFlashCommonLib.h>
+#include <Library/IoLib.h>
+#include <Library/PciLib.h>
+#include <Protocol/Spi.h>
+
+
+EFI_SPI_PROTOCOL *mSpiProtocol;
+
+//
+// FlashAreaBaseAddress and Size for boottime and runtime usage.
+//
+UINTN mFlashAreaBaseAddress = 0;
+UINTN mFlashAreaSize = 0;
+
+/**
+ Enable block protection on the Serial Flash device.
+
+ @retval EFI_SUCCESS Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashLock (
+ VOID
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Read NumBytes bytes of data from the address specified by
+ PAddress into Buffer.
+
+ @param[in] Address The starting physical address of the read.
+ @param[in,out] NumBytes On input, the number of bytes to read. On output, the number
+ of bytes actually read.
+ @param[out] Buffer The destination data buffer for the read.
+
+ @retval EFI_SUCCESS Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashRead (
+ IN UINTN Address,
+ IN OUT UINT32 *NumBytes,
+ OUT UINT8 *Buffer
+ )
+{
+ ASSERT ((NumBytes != NULL) && (Buffer != NULL));
+ if ((NumBytes == NULL) || (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // This function is implemented specifically for those platforms
+ // at which the SPI device is memory mapped for read. So this
+ // function just do a memory copy for Spi Flash Read.
+ //
+ CopyMem (Buffer, (VOID *) Address, *NumBytes);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Write NumBytes bytes of data from Buffer to the address specified by
+ PAddresss.
+
+ @param[in] Address The starting physical address of the write.
+ @param[in,out] NumBytes On input, the number of bytes to write. On output,
+ the actual number of bytes written.
+ @param[in] Buffer The source data buffer for the write.
+
+ @retval EFI_SUCCESS Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashWrite (
+ IN UINTN Address,
+ IN OUT UINT32 *NumBytes,
+ IN UINT8 *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN Offset;
+ UINT32 Length;
+ UINT32 RemainingBytes;
+
+ ASSERT ((NumBytes != NULL) && (Buffer != NULL));
+ if ((NumBytes == NULL) || (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ASSERT (Address >= mFlashAreaBaseAddress);
+
+ Offset = Address - mFlashAreaBaseAddress;
+
+ ASSERT ((*NumBytes + Offset) <= mFlashAreaSize);
+
+ Status = EFI_SUCCESS;
+ RemainingBytes = *NumBytes;
+
+
+ while (RemainingBytes > 0) {
+ if (RemainingBytes > SECTOR_SIZE_4KB) {
+ Length = SECTOR_SIZE_4KB;
+ } else {
+ Length = RemainingBytes;
+ }
+ Status = mSpiProtocol->FlashWrite (
+ mSpiProtocol,
+ FlashRegionBios,
+ (UINT32) Offset,
+ Length,
+ Buffer
+ );
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+ RemainingBytes -= Length;
+ Offset += Length;
+ Buffer += Length;
+ }
+
+ //
+ // Actual number of bytes written
+ //
+ *NumBytes -= RemainingBytes;
+
+ return Status;
+}
+
+/**
+ Erase the block starting at Address.
+
+ @param[in] Address The starting physical address of the block to be erased.
+ This library assume that caller garantee that the PAddress
+ is at the starting address of this block.
+ @param[in] NumBytes On input, the number of bytes of the logical block to be erased.
+ On output, the actual number of bytes erased.
+
+ @retval EFI_SUCCESS. Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashBlockErase (
+ IN UINTN Address,
+ IN UINTN *NumBytes
+ )
+{
+ EFI_STATUS Status;
+ UINTN Offset;
+ UINTN RemainingBytes;
+
+ ASSERT (NumBytes != NULL);
+ if (NumBytes == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ASSERT (Address >= mFlashAreaBaseAddress);
+
+ Offset = Address - mFlashAreaBaseAddress;
+
+ ASSERT ((*NumBytes % SECTOR_SIZE_4KB) == 0);
+ ASSERT ((*NumBytes + Offset) <= mFlashAreaSize);
+
+ Status = EFI_SUCCESS;
+ RemainingBytes = *NumBytes;
+
+
+ Status = mSpiProtocol->FlashErase (
+ mSpiProtocol,
+ FlashRegionBios,
+ (UINT32) Offset,
+ (UINT32) RemainingBytes
+ );
+ return Status;
+}
+
|