diff options
Diffstat (limited to 'StdLib/Include/Efi')
-rw-r--r-- | StdLib/Include/Efi/EfiSocketLib.h | 752 |
1 files changed, 0 insertions, 752 deletions
diff --git a/StdLib/Include/Efi/EfiSocketLib.h b/StdLib/Include/Efi/EfiSocketLib.h deleted file mode 100644 index 7618d02801..0000000000 --- a/StdLib/Include/Efi/EfiSocketLib.h +++ /dev/null @@ -1,752 +0,0 @@ -/** @file
- Definitions for the EFI Socket layer library.
-
- Copyright (c) 2011 - 2015, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _EFI_SOCKET_LIB_H_
-#define _EFI_SOCKET_LIB_H_
-
-#include <Uefi.h>
-
-#include <Library/BaseMemoryLib.h>
-#include <Library/DebugLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-
-#include <Protocol/EfiSocket.h>
-#include <Protocol/Ip4Config2.h>
-#include <Protocol/Ip6Config.h>
-#include <Protocol/ServiceBinding.h>
-#include <Protocol/Tcp4.h>
-#include <Protocol/Tcp6.h>
-#include <Protocol/Udp4.h>
-#include <Protocol/Udp6.h>
-
-#include <sys/time.h>
-
-//------------------------------------------------------------------------------
-// Constants
-//------------------------------------------------------------------------------
-
-#define DEBUG_TPL 0x40000000 ///< Display TPL change messages
-
-#define TPL_SOCKETS TPL_CALLBACK ///< TPL for routine synchronization
-
-//------------------------------------------------------------------------------
-// Macros
-//------------------------------------------------------------------------------
-
-#if defined(_MSC_VER) /* Handle Microsoft VC++ compiler specifics. */
-#define DBG_ENTER() DEBUG (( DEBUG_INFO, "Entering " __FUNCTION__ "\n" )) ///< Display routine entry
-#define DBG_EXIT() DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ "\n" )) ///< Display routine exit
-#define DBG_EXIT_DEC(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", Status: %d\n", Status )) ///< Display routine exit with decimal value
-#define DBG_EXIT_HEX(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", Status: 0x%08x\n", Status )) ///< Display routine exit with hex value
-#define DBG_EXIT_STATUS(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", Status: %r\n", Status )) ///< Display routine exit with status value
-#define DBG_EXIT_TF(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", returning %s\n", (FALSE == Status) ? L"FALSE" : L"TRUE" )) ///< Display routine with TRUE/FALSE value
-#else // _MSC_VER
-#define DBG_ENTER() ///< Display routine entry
-#define DBG_EXIT() ///< Display routine exit
-#define DBG_EXIT_DEC(Status) ///< Display routine exit with decimal value
-#define DBG_EXIT_HEX(Status) ///< Display routine exit with hex value
-#define DBG_EXIT_STATUS(Status) ///< Display routine exit with status value
-#define DBG_EXIT_TF(Status) ///< Display routine with TRUE/FALSE value
-#endif // _MSC_VER
-
-#define DIM(x) ( sizeof ( x ) / sizeof ( x[0] )) ///< Compute the number of entries in an array
-
-/**
- Verify new TPL value
-
- This macro which is enabled when debug is enabled verifies that
- the new TPL value is >= the current TPL value.
-**/
-#ifdef VERIFY_TPL
-#undef VERIFY_TPL
-#endif // VERIFY_TPL
-
-#if !defined(MDEPKG_NDEBUG)
-
-/**
- Verify that the TPL is at the correct level
-**/
-#define VERIFY_AT_TPL(tpl) \
-{ \
- EFI_TPL PreviousTpl; \
- \
- PreviousTpl = EfiGetCurrentTpl ( ); \
- if ( PreviousTpl != tpl ) { \
- DEBUG (( DEBUG_ERROR | DEBUG_TPL, \
- "Current TPL: %d, New TPL: %d\r\n", \
- PreviousTpl, tpl )); \
- ASSERT ( PreviousTpl == tpl ); \
- } \
-}
-
-#define VERIFY_TPL(tpl) \
-{ \
- EFI_TPL PreviousTpl; \
- \
- PreviousTpl = EfiGetCurrentTpl ( ); \
- if ( PreviousTpl > tpl ) { \
- DEBUG (( DEBUG_ERROR | DEBUG_TPL, \
- "Current TPL: %d, New TPL: %d\r\n", \
- PreviousTpl, tpl )); \
- ASSERT ( PreviousTpl <= tpl ); \
- } \
-}
-
-#else // MDEPKG_NDEBUG
-
-#define VERIFY_AT_TPL(tpl) ///< Verify that the TPL is at the correct level
-#define VERIFY_TPL(tpl) ///< Verify that the TPL is at the correct level
-
-#endif // MDEPKG_NDEBUG
-
-/**
- Raise TPL to the specified level
-**/
-#define RAISE_TPL(PreviousTpl, tpl) \
- VERIFY_TPL ( tpl ); \
- PreviousTpl = gBS->RaiseTPL ( tpl );
-
-/**
- Restore the TPL to the previous value
-**/
-#define RESTORE_TPL(tpl) \
- gBS->RestoreTPL ( tpl )
-
-//------------------------------------------------------------------------------
-// Data Types
-//------------------------------------------------------------------------------
-
-typedef struct _ESL_SERVICE ESL_SERVICE; ///< Forward delcaration
-
-/**
- Protocol binding and installation control structure
-
- The driver uses this structure to simplify the driver binding processing.
-**/
-typedef struct {
- CHAR16 * pName; ///< Protocol name
- EFI_GUID * pNetworkBinding; ///< Network service binding protocol for socket support
- EFI_GUID * pNetworkProtocolGuid;///< Network protocol GUID
- CONST EFI_GUID * pTagGuid; ///< Tag to mark protocol in use
- UINTN ServiceListOffset; ///< Offset in ::ESL_LAYER for the list of services
- UINTN RxIo; ///< Number of receive ESL_IO_MGMT structures for data
- UINTN TxIoNormal; ///< Number of transmit ESL_IO_MGMT structures for normal data
- UINTN TxIoUrgent; ///< Number of transmit ESL_IO_MGMT structures for urgent data
-} ESL_SOCKET_BINDING;
-
-//------------------------------------------------------------------------------
-// GUIDs
-//------------------------------------------------------------------------------
-
-extern CONST EFI_GUID mEslIp4ServiceGuid; ///< Tag GUID for the IPv4 layer
-extern CONST EFI_GUID mEslIp6ServiceGuid; ///< Tag GUID for the IPv6 layer
-extern CONST EFI_GUID mEslTcp4ServiceGuid; ///< Tag GUID for the TCPv4 layer
-extern CONST EFI_GUID mEslTcp6ServiceGuid; ///< Tag GUID for the TCPv6 layer
-extern CONST EFI_GUID mEslUdp4ServiceGuid; ///< Tag GUID for the UDPv4 layer
-extern CONST EFI_GUID mEslUdp6ServiceGuid; ///< Tag GUID for the UDPv6 layer
-
-//------------------------------------------------------------------------------
-// Data
-//------------------------------------------------------------------------------
-
-extern CONST ESL_SOCKET_BINDING cEslSocketBinding[];///< List of network service bindings
-extern CONST UINTN cEslSocketBindingEntries; ///< Number of network service bindings
-
-//------------------------------------------------------------------------------
-// DXE Support Routines
-//------------------------------------------------------------------------------
-
-/**
- Creates a child handle and installs a protocol.
-
- When the socket application is linked against UseSocketDxe, the ::socket
- routine indirectly calls this routine in SocketDxe to create a child
- handle if necessary and install the socket protocol on the handle.
- Upon return, EslServiceGetProtocol in UseSocketLib returns the
- ::EFI_SOCKET_PROTOCOL address to the socket routine.
-
- @param [in] pThis Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
- @param [in] pChildHandle Pointer to the handle of the child to create. If it is NULL,
- then a new handle is created. If it is a pointer to an existing UEFI handle,
- then the protocol is added to the existing UEFI handle.
-
- @retval EFI_SUCCESS The protocol was added to ChildHandle.
- @retval EFI_INVALID_PARAMETER ChildHandle is NULL.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create
- the child
- @retval other The child handle was not created
-
-**/
-EFI_STATUS
-EFIAPI
-EslDxeCreateChild (
- IN EFI_SERVICE_BINDING_PROTOCOL * pThis,
- IN OUT EFI_HANDLE * pChildHandle
- );
-
-/**
- Destroys a child handle with a protocol installed on it.
-
- When the socket application is linked against UseSocketDxe, the ::close
- routine indirectly calls this routine in SocketDxe to undo the operations
- done by the ::EslDxeCreateChild routine. This routine removes the socket
- protocol from the handle and then destroys the child handle if there are
- no other protocols attached.
-
- @param [in] pThis Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
- @param [in] ChildHandle Handle of the child to destroy
-
- @retval EFI_SUCCESS The protocol was removed from ChildHandle.
- @retval EFI_UNSUPPORTED ChildHandle does not support the protocol that is being removed.
- @retval EFI_INVALID_PARAMETER Child handle is not a valid UEFI Handle.
- @retval EFI_ACCESS_DENIED The protocol could not be removed from the ChildHandle
- because its services are being used.
- @retval other The child handle was not destroyed
-
-**/
-EFI_STATUS
-EFIAPI
-EslDxeDestroyChild (
- IN EFI_SERVICE_BINDING_PROTOCOL * pThis,
- IN EFI_HANDLE ChildHandle
- );
-
-/**
-Install the socket service
-
-SocketDxe uses this routine to announce the socket interface to
-the rest of EFI.
-
-@param [in] pImageHandle Address of the image handle
-
-@retval EFI_SUCCESS Service installed successfully
-**/
-EFI_STATUS
-EFIAPI
-EslDxeInstall (
- IN EFI_HANDLE * pImageHandle
- );
-
-/**
-Uninstall the socket service
-
-SocketDxe uses this routine to notify EFI that the socket layer
-is no longer available.
-
-@param [in] ImageHandle Handle for the image.
-
-@retval EFI_SUCCESS Service installed successfully
-**/
-EFI_STATUS
-EFIAPI
-EslDxeUninstall (
- IN EFI_HANDLE ImageHandle
- );
-
-//------------------------------------------------------------------------------
-// Service Support Routines
-//------------------------------------------------------------------------------
-
-/**
- Connect to the network service bindings
-
- Walk the network service protocols on the controller handle and
- locate any that are not in use. Create ::ESL_SERVICE structures to
- manage the network layer interfaces for the socket driver. Tag
- each of the network interfaces that are being used. Finally, this
- routine calls ESL_SOCKET_BINDING::pfnInitialize to prepare the network
- interface for use by the socket layer.
-
- @param [in] BindingHandle Handle for protocol binding.
- @param [in] Controller Handle of device to work with.
-
- @retval EFI_SUCCESS This driver is added to Controller.
- @retval other This driver does not support this device.
-
-**/
-EFI_STATUS
-EFIAPI
-EslServiceConnect (
- IN EFI_HANDLE BindingHandle,
- IN EFI_HANDLE Controller
- );
-
-/**
- Shutdown the connections to the network layer by locating the
- tags on the network interfaces established by ::EslServiceConnect.
- This routine calls ESL_SOCKET_BINDING::pfnShutdown to shutdown the any
- activity on the network interface and then free the ::ESL_SERVICE
- structures.
-
- @param [in] BindingHandle Handle for protocol binding.
- @param [in] Controller Handle of device to stop driver on.
-
- @retval EFI_SUCCESS This driver is removed Controller.
- @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
- @retval other This driver was not removed from this device.
-
-**/
-EFI_STATUS
-EFIAPI
-EslServiceDisconnect (
- IN EFI_HANDLE BindingHandle,
- IN EFI_HANDLE Controller
- );
-
-/**
-Initialize the service layer
-
-@param [in] ImageHandle Handle for the image.
-
-**/
-VOID
-EFIAPI
-EslServiceLoad (
- IN EFI_HANDLE ImageHandle
- );
-
-/**
- Shutdown the service layer
-
-**/
-VOID
-EFIAPI
-EslServiceUnload (
- VOID
- );
-
-//------------------------------------------------------------------------------
-// Socket Protocol Routines
-//------------------------------------------------------------------------------
-
-/**
- Bind a name to a socket.
-
- This routine calls the network specific layer to save the network
- address of the local connection point.
-
- The ::bind routine calls this routine to connect a name
- (network address and port) to a socket on the local machine.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [in] pSockAddr Address of a sockaddr structure that contains the
- connection point on the local machine. An IPv4 address
- of INADDR_ANY specifies that the connection is made to
- all of the network stacks on the platform. Specifying a
- specific IPv4 address restricts the connection to the
- network stack supporting that address. Specifying zero
- for the port causes the network layer to assign a port
- number from the dynamic range. Specifying a specific
- port number causes the network layer to use that port.
-
- @param [in] SockAddrLength Specifies the length in bytes of the sockaddr structure.
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Socket successfully created
-
- **/
-EFI_STATUS
-EslSocketBind (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN CONST struct sockaddr * pSockAddr,
- IN socklen_t SockAddrLength,
- OUT int * pErrno
- );
-
-/**
- Determine if the socket is closed
-
- This routine checks the state of the socket to determine if
- the network specific layer has completed the close operation.
-
- The ::close routine polls this routine to determine when the
- close operation is complete. The close operation needs to
- reverse the operations of the ::EslSocketAllocate routine.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS Socket successfully closed
- @retval EFI_NOT_READY Close still in progress
- @retval EFI_ALREADY Close operation already in progress
- @retval Other Failed to close the socket
-
-**/
-EFI_STATUS
-EslSocketClosePoll (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN int * pErrno
- );
-
-/**
- Start the close operation on the socket
-
- This routine calls the network specific layer to initiate the
- close state machine. This routine then calls the network
- specific layer to determine if the close state machine has gone
- to completion. The result from this poll is returned to the
- caller.
-
- The ::close routine calls this routine to start the close
- operation which reverses the operations of the
- ::EslSocketAllocate routine. The close routine then polls
- the ::EslSocketClosePoll routine to determine when the
- socket is closed.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
- @param [in] bCloseNow Boolean to control close behavior
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS Socket successfully closed
- @retval EFI_NOT_READY Close still in progress
- @retval EFI_ALREADY Close operation already in progress
- @retval Other Failed to close the socket
-
-**/
-EFI_STATUS
-EslSocketCloseStart (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN BOOLEAN bCloseNow,
- IN int * pErrno
- );
-
-/**
- Connect to a remote system via the network.
-
- This routine calls the network specific layer to establish
- the remote system address and establish the connection to
- the remote system.
-
- The ::connect routine calls this routine to establish a
- connection with the specified remote system. This routine
- is designed to be polled by the connect routine for completion
- of the network connection.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [in] pSockAddr Network address of the remote system.
-
- @param [in] SockAddrLength Length in bytes of the network address.
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS The connection was successfully established.
- @retval EFI_NOT_READY The connection is in progress, call this routine again.
- @retval Others The connection attempt failed.
-
- **/
-EFI_STATUS
-EslSocketConnect (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN const struct sockaddr * pSockAddr,
- IN socklen_t SockAddrLength,
- IN int * pErrno
- );
-
-/**
- Get the local address.
-
- This routine calls the network specific layer to get the network
- address of the local host connection point.
-
- The ::getsockname routine calls this routine to obtain the network
- address associated with the local host connection point.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [out] pAddress Network address to receive the local system address
-
- @param [in,out] pAddressLength Length of the local network address structure
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Local address successfully returned
-
- **/
-EFI_STATUS
-EslSocketGetLocalAddress (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- OUT struct sockaddr * pAddress,
- IN OUT socklen_t * pAddressLength,
- IN int * pErrno
- );
-
-/**
- Get the peer address.
-
- This routine calls the network specific layer to get the remote
- system connection point.
-
- The ::getpeername routine calls this routine to obtain the network
- address of the remote connection point.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [out] pAddress Network address to receive the remote system address
-
- @param [in,out] pAddressLength Length of the remote network address structure
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Remote address successfully returned
-
- **/
-EFI_STATUS
-EslSocketGetPeerAddress (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- OUT struct sockaddr * pAddress,
- IN OUT socklen_t * pAddressLength,
- IN int * pErrno
- );
-
-/**
- Establish the known port to listen for network connections.
-
- This routine calls into the network protocol layer to establish
- a handler that is called upon connection completion. The handler
- is responsible for inserting the connection into the FIFO.
-
- The ::listen routine indirectly calls this routine to place the
- socket into a state that enables connection attempts. Connections
- are placed in a FIFO that is serviced by the application. The
- application calls the ::accept (::EslSocketAccept) routine to
- remove the next connection from the FIFO and get the associated
- socket and address.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [in] Backlog Backlog specifies the maximum FIFO depth for
- the connections waiting for the application
- to call accept. Connection attempts received
- while the queue is full are refused.
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Socket successfully created
- @retval Other - Failed to enable the socket for listen
-
-**/
-EFI_STATUS
-EslSocketListen (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN INT32 Backlog,
- OUT int * pErrno
- );
-
-/**
- Get the socket options
-
- This routine handles the socket level options and passes the
- others to the network specific layer.
-
- The ::getsockopt routine calls this routine to retrieve the
- socket options one at a time by name.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
- @param [in] level Option protocol level
- @param [in] OptionName Name of the option
- @param [out] pOptionValue Buffer to receive the option value
- @param [in,out] pOptionLength Length of the buffer in bytes,
- upon return length of the option value in bytes
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Socket data successfully received
-
- **/
-EFI_STATUS
-EslSocketOptionGet (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN int level,
- IN int option_name,
- OUT void * __restrict option_value,
- IN OUT socklen_t * __restrict option_len,
- IN int * pErrno
- );
-
-/**
- Set the socket options
-
- This routine handles the socket level options and passes the
- others to the network specific layer.
-
- The ::setsockopt routine calls this routine to adjust the socket
- options one at a time by name.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
- @param [in] level Option protocol level
- @param [in] OptionName Name of the option
- @param [in] pOptionValue Buffer containing the option value
- @param [in] OptionLength Length of the buffer in bytes
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Option successfully set
-
- **/
-EFI_STATUS
-EslSocketOptionSet (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN int level,
- IN int option_name,
- IN CONST void * option_value,
- IN socklen_t option_len,
- IN int * pErrno
- );
-
-/**
- Poll a socket for pending activity.
-
- This routine builds a detected event mask which is returned to
- the caller in the buffer provided.
-
- The ::poll routine calls this routine to determine if the socket
- needs to be serviced as a result of connection, error, receive or
- transmit activity.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [in] Events Events of interest for this socket
-
- @param [in] pEvents Address to receive the detected events
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Socket successfully polled
- @retval EFI_INVALID_PARAMETER - When pEvents is NULL
-
- **/
-EFI_STATUS
-EslSocketPoll (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN short Events,
- IN short * pEvents,
- IN int * pErrno
- );
-
-/**
- Receive data from a network connection.
-
- This routine calls the network specific routine to remove the
- next portion of data from the receive queue and return it to the
- caller.
-
- The ::recvfrom routine calls this routine to determine if any data
- is received from the remote system. Note that the other routines
- ::recv and ::read are layered on top of ::recvfrom.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [in] Flags Message control flags
-
- @param [in] BufferLength Length of the the buffer
-
- @param [in] pBuffer Address of a buffer to receive the data.
-
- @param [in] pDataLength Number of received data bytes in the buffer.
-
- @param [out] pAddress Network address to receive the remote system address
-
- @param [in,out] pAddressLength Length of the remote network address structure
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Socket data successfully received
-
- **/
-EFI_STATUS
-EslSocketReceive (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN INT32 Flags,
- IN size_t BufferLength,
- IN UINT8 * pBuffer,
- OUT size_t * pDataLength,
- OUT struct sockaddr * pAddress,
- IN OUT socklen_t * pAddressLength,
- IN int * pErrno
- );
-
-/**
- Shutdown the socket receive and transmit operations
-
- This routine sets a flag to stop future transmissions and calls
- the network specific layer to cancel the pending receive operation.
-
- The ::shutdown routine calls this routine to stop receive and transmit
- operations on the socket.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [in] How Which operations to stop
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Socket operations successfully shutdown
-
- **/
-EFI_STATUS
-EslSocketShutdown (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN int How,
- IN int * pErrno
- );
-
-/**
- Send data using a network connection.
-
- This routine calls the network specific layer to queue the data
- for transmission. Eventually the buffer will reach the head of
- the queue and will get transmitted over the network. For datagram
- sockets there is no guarantee that the data reaches the application
- running on the remote system.
-
- The ::sendto routine calls this routine to send data to the remote
- system. Note that ::send and ::write are layered on top of ::sendto.
-
- @param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
-
- @param [in] Flags Message control flags
-
- @param [in] BufferLength Length of the the buffer
-
- @param [in] pBuffer Address of a buffer containing the data to send
-
- @param [in] pDataLength Address to receive the number of data bytes sent
-
- @param [in] pAddress Network address of the remote system address
-
- @param [in] AddressLength Length of the remote network address structure
-
- @param [out] pErrno Address to receive the errno value upon completion.
-
- @retval EFI_SUCCESS - Socket data successfully queued for transmit
-
- **/
-EFI_STATUS
-EslSocketTransmit (
- IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
- IN int Flags,
- IN size_t BufferLength,
- IN CONST UINT8 * pBuffer,
- OUT size_t * pDataLength,
- IN const struct sockaddr * pAddress,
- IN socklen_t AddressLength,
- IN int * pErrno
- );
-
-//------------------------------------------------------------------------------
-
-#endif // _EFI_SOCKET_LIB_H_
|