diff options
Diffstat (limited to 'UefiCpuPkg')
| -rw-r--r-- | UefiCpuPkg/CpuDxe/CpuMp.c | 436 | ||||
| -rw-r--r-- | UefiCpuPkg/CpuDxe/CpuMp.h | 160 |
2 files changed, 595 insertions, 1 deletions
diff --git a/UefiCpuPkg/CpuDxe/CpuMp.c b/UefiCpuPkg/CpuDxe/CpuMp.c index 552bac3c6d..b576d18ca4 100644 --- a/UefiCpuPkg/CpuDxe/CpuMp.c +++ b/UefiCpuPkg/CpuDxe/CpuMp.c @@ -28,7 +28,7 @@ VOID *mApStackStart = 0; EFI_MP_SERVICES_PROTOCOL mMpServicesTemplate = {
GetNumberOfProcessors,
GetProcessorInfo,
- NULL, // StartupAllAPs,
+ StartupAllAPs,
StartupThisAP,
NULL, // SwitchBSP,
EnableDisableAP,
@@ -239,6 +239,106 @@ GetNextBlockedNumber ( }
/**
+ Check if the APs state are finished, and update them to idle state
+ by StartupAllAPs().
+
+**/
+VOID
+CheckAndUpdateAllAPsToIdleState (
+ VOID
+ )
+{
+ UINTN ProcessorNumber;
+ UINTN NextNumber;
+ CPU_DATA_BLOCK *CpuData;
+ EFI_STATUS Status;
+ CPU_STATE CpuState;
+
+ for (ProcessorNumber = 0; ProcessorNumber < mMpSystemData.NumberOfProcessors; ProcessorNumber++) {
+ CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
+ //
+ // Skip BSP
+ //
+ continue;
+ }
+
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
+ //
+ // Skip Disabled processors
+ //
+ continue;
+ }
+
+ CpuState = GetApState (CpuData);
+ if (CpuState == CpuStateFinished) {
+ mMpSystemData.FinishCount++;
+ if (mMpSystemData.SingleThread) {
+ Status = GetNextBlockedNumber (&NextNumber);
+ if (!EFI_ERROR (Status)) {
+ SetApState (&mMpSystemData.CpuDatas[NextNumber], CpuStateReady);
+ SetApProcedure (&mMpSystemData.CpuDatas[NextNumber],
+ mMpSystemData.Procedure,
+ mMpSystemData.ProcedureArgument);
+ }
+ }
+
+ SetApState (CpuData, CpuStateIdle);
+ }
+ }
+}
+
+/**
+ If the timeout expires before all APs returns from Procedure,
+ we should forcibly terminate the executing AP and fill FailedList back
+ by StartupAllAPs().
+
+**/
+VOID
+ResetAllFailedAPs (
+ VOID
+ )
+{
+ CPU_DATA_BLOCK *CpuData;
+ UINTN Number;
+ CPU_STATE CpuState;
+
+ if (mMpSystemData.FailedList != NULL) {
+ *mMpSystemData.FailedList = AllocatePool ((mMpSystemData.StartCount - mMpSystemData.FinishCount + 1) * sizeof(UINTN));
+ ASSERT (*mMpSystemData.FailedList != NULL);
+ }
+
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
+ CpuData = &mMpSystemData.CpuDatas[Number];
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
+ //
+ // Skip BSP
+ //
+ continue;
+ }
+
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
+ //
+ // Skip Disabled processors
+ //
+ continue;
+ }
+
+ CpuState = GetApState (CpuData);
+ if (CpuState != CpuStateIdle) {
+ if (mMpSystemData.FailedList != NULL) {
+ (*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex++] = Number;
+ }
+ ResetProcessorToIdleState (CpuData);
+ }
+ }
+
+ if (mMpSystemData.FailedList != NULL) {
+ (*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex] = END_OF_CPU_LIST;
+ }
+}
+
+/**
This service retrieves the number of logical processor in the platform
and the number of those logical processors that are enabled on this boot.
This service may only be called from the BSP.
@@ -346,6 +446,281 @@ GetProcessorInfo ( }
/**
+ This service executes a caller provided function on all enabled APs. APs can
+ run either simultaneously or one at a time in sequence. This service supports
+ both blocking and non-blocking requests. The non-blocking requests use EFI
+ events so the BSP can detect when the APs have finished. This service may only
+ be called from the BSP.
+
+ This function is used to dispatch all the enabled APs to the function specified
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
+ immediately and Procedure is not started on any AP.
+
+ If SingleThread is TRUE, all the enabled APs execute the function specified by
+ Procedure one by one, in ascending order of processor handle number. Otherwise,
+ all the enabled APs execute the function specified by Procedure simultaneously.
+
+ If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
+ APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking
+ mode, and the BSP returns from this service without waiting for APs. If a
+ non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled, then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs
+ are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its
+ content points to the list of processor handle numbers in which Procedure was
+ terminated.
+
+ Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ to make sure that the nature of the code that is executed on the BSP and the
+ dispatched APs is well controlled. The MP Services Protocol does not guarantee
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in
+ parallel are limited to certain independent tasks and well-controlled exclusive
+ code. EFI services and protocols may not be called by APs unless otherwise
+ specified.
+
+ In blocking execution mode, BSP waits until all APs finish or
+ TimeoutInMicroseconds expires.
+
+ In non-blocking execution mode, BSP is freed to return to the caller and then
+ proceed to the next task without having to wait for APs. The following
+ sequence needs to occur in a non-blocking execution mode:
+
+ -# The caller that intends to use this MP Services Protocol in non-blocking
+ mode creates WaitEvent by calling the EFI CreateEvent() service. The caller
+ invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent
+ is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests
+ the function specified by Procedure to be started on all the enabled APs,
+ and releases the BSP to continue with other tasks.
+ -# The caller can use the CheckEvent() and WaitForEvent() services to check
+ the state of the WaitEvent created in step 1.
+ -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP
+ Service signals WaitEvent by calling the EFI SignalEvent() function. If
+ FailedCpuList is not NULL, its content is available when WaitEvent is
+ signaled. If all APs returned from Procedure prior to the timeout, then
+ FailedCpuList is set to NULL. If not all APs return from Procedure before
+ the timeout, then FailedCpuList is filled in with the list of the failed
+ APs. The buffer is allocated by MP Service Protocol using AllocatePool().
+ It is the caller's responsibility to free the buffer with FreePool() service.
+ -# This invocation of SignalEvent() function informs the caller that invoked
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed
+ the specified task or a timeout occurred. The contents of FailedCpuList
+ can be examined to determine which APs did not complete the specified task
+ prior to the timeout.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroseconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroseconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Service Protocol,
+ and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupAllAPs (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ CPU_DATA_BLOCK *CpuData;
+ UINTN Number;
+ CPU_STATE APInitialState;
+
+ CpuData = NULL;
+
+ if (FailedCpuList != NULL) {
+ *FailedCpuList = NULL;
+ }
+
+ if (!IsBSP ()) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (mMpSystemData.NumberOfProcessors == 1) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (Procedure == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
+ CpuData = &mMpSystemData.CpuDatas[Number];
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
+ //
+ // Skip BSP
+ //
+ continue;
+ }
+
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
+ //
+ // Skip Disabled processors
+ //
+ continue;
+ }
+
+ if (GetApState (CpuData) != CpuStateIdle) {
+ return EFI_NOT_READY;
+ }
+ }
+
+ mMpSystemData.Procedure = Procedure;
+ mMpSystemData.ProcedureArgument = ProcedureArgument;
+ mMpSystemData.WaitEvent = WaitEvent;
+ mMpSystemData.Timeout = TimeoutInMicroseconds;
+ mMpSystemData.TimeoutActive = !!(TimeoutInMicroseconds);
+ mMpSystemData.FinishCount = 0;
+ mMpSystemData.StartCount = 0;
+ mMpSystemData.SingleThread = SingleThread;
+ mMpSystemData.FailedList = FailedCpuList;
+ mMpSystemData.FailedListIndex = 0;
+ APInitialState = CpuStateReady;
+
+ for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
+ CpuData = &mMpSystemData.CpuDatas[Number];
+ if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
+ //
+ // Skip BSP
+ //
+ continue;
+ }
+
+ if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
+ //
+ // Skip Disabled processors
+ //
+ continue;
+ }
+
+ //
+ // Get APs prepared, and put failing APs into FailedCpuList
+ // if "SingleThread", only 1 AP will put to ready state, other AP will be put to ready
+ // state 1 by 1, until the previous 1 finished its task
+ // if not "SingleThread", all APs are put to ready state from the beginning
+ //
+ if (GetApState (CpuData) == CpuStateIdle) {
+ mMpSystemData.StartCount++;
+
+ SetApState (CpuData, APInitialState);
+
+ if (APInitialState == CpuStateReady) {
+ SetApProcedure (CpuData, Procedure, ProcedureArgument);
+ }
+
+ if (SingleThread) {
+ APInitialState = CpuStateBlocked;
+ }
+ }
+ }
+
+ if (WaitEvent != NULL) {
+ Status = gBS->SetTimer (
+ mMpSystemData.CheckAllAPsEvent,
+ TimerPeriodic,
+ EFI_TIMER_PERIOD_MICROSECONDS (100)
+ );
+ return Status;
+ }
+
+ while (TRUE) {
+ CheckAndUpdateAllAPsToIdleState ();
+ if (mMpSystemData.FinishCount == mMpSystemData.StartCount) {
+ Status = EFI_SUCCESS;
+ goto Done;
+ }
+
+ //
+ // task timeout
+ //
+ if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) {
+ ResetAllFailedAPs();
+ Status = EFI_TIMEOUT;
+ goto Done;
+ }
+
+ gBS->Stall (gPollInterval);
+ mMpSystemData.Timeout -= gPollInterval;
+ }
+
+Done:
+
+ return Status;
+}
+
+/**
This service lets the caller get one enabled AP to execute a caller-provided
function. The caller can request the BSP to either wait for the completion
of the AP or just proceed with the next task by using the EFI event mechanism.
@@ -747,6 +1122,56 @@ out: }
/**
+ Checks APs' status periodically.
+
+ This function is triggerred by timer perodically to check the
+ state of APs for StartupAllAPs() executed in non-blocking mode.
+
+ @param Event Event triggered.
+ @param Context Parameter passed with the event.
+
+**/
+VOID
+EFIAPI
+CheckAllAPsStatus (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ if (mMpSystemData.TimeoutActive) {
+ mMpSystemData.Timeout -= gPollInterval;
+ }
+
+ CheckAndUpdateAllAPsToIdleState ();
+
+ //
+ // task timeout
+ //
+ if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) {
+ ResetAllFailedAPs();
+ //
+ // force exit
+ //
+ mMpSystemData.FinishCount = mMpSystemData.StartCount;
+ }
+
+ if (mMpSystemData.FinishCount != mMpSystemData.StartCount) {
+ return;
+ }
+
+ gBS->SetTimer (
+ mMpSystemData.CheckAllAPsEvent,
+ TimerCancel,
+ 0
+ );
+
+ if (mMpSystemData.WaitEvent) {
+ gBS->SignalEvent (mMpSystemData.WaitEvent);
+ mMpSystemData.WaitEvent = NULL;
+ }
+}
+
+/**
Application Processor C code entry point.
**/
@@ -831,6 +1256,15 @@ InitMpSystemData ( mMpSystemData.CpuDatas = AllocateZeroPool (sizeof (CPU_DATA_BLOCK) * gMaxLogicalProcessorNumber);
ASSERT(mMpSystemData.CpuDatas != NULL);
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ CheckAllAPsStatus,
+ NULL,
+ &mMpSystemData.CheckAllAPsEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
for (ProcessorNumber = 0; ProcessorNumber < gMaxLogicalProcessorNumber; ProcessorNumber++) {
CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
Status = gBS->CreateEvent (
diff --git a/UefiCpuPkg/CpuDxe/CpuMp.h b/UefiCpuPkg/CpuDxe/CpuMp.h index 6d80f053b4..2b3b9b23d4 100644 --- a/UefiCpuPkg/CpuDxe/CpuMp.h +++ b/UefiCpuPkg/CpuDxe/CpuMp.h @@ -112,6 +112,18 @@ typedef struct { CPU_DATA_BLOCK *CpuDatas;
UINTN NumberOfProcessors;
UINTN NumberOfEnabledProcessors;
+
+ EFI_AP_PROCEDURE Procedure;
+ VOID *ProcedureArgument;
+ UINTN StartCount;
+ UINTN FinishCount;
+ BOOLEAN SingleThread;
+ UINTN **FailedList;
+ UINTN FailedListIndex;
+ INTN Timeout;
+ EFI_EVENT WaitEvent;
+ BOOLEAN TimeoutActive;
+ EFI_EVENT CheckAllAPsEvent;
} MP_SYSTEM_DATA;
/**
@@ -208,6 +220,154 @@ GetProcessorInfo ( );
/**
+ This service executes a caller provided function on all enabled APs. APs can
+ run either simultaneously or one at a time in sequence. This service supports
+ both blocking and non-blocking requests. The non-blocking requests use EFI
+ events so the BSP can detect when the APs have finished. This service may only
+ be called from the BSP.
+
+ This function is used to dispatch all the enabled APs to the function specified
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
+ immediately and Procedure is not started on any AP.
+
+ If SingleThread is TRUE, all the enabled APs execute the function specified by
+ Procedure one by one, in ascending order of processor handle number. Otherwise,
+ all the enabled APs execute the function specified by Procedure simultaneously.
+
+ If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
+ APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking
+ mode, and the BSP returns from this service without waiting for APs. If a
+ non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled, then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs
+ are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its
+ content points to the list of processor handle numbers in which Procedure was
+ terminated.
+
+ Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ to make sure that the nature of the code that is executed on the BSP and the
+ dispatched APs is well controlled. The MP Services Protocol does not guarantee
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in
+ parallel are limited to certain independent tasks and well-controlled exclusive
+ code. EFI services and protocols may not be called by APs unless otherwise
+ specified.
+
+ In blocking execution mode, BSP waits until all APs finish or
+ TimeoutInMicroseconds expires.
+
+ In non-blocking execution mode, BSP is freed to return to the caller and then
+ proceed to the next task without having to wait for APs. The following
+ sequence needs to occur in a non-blocking execution mode:
+
+ -# The caller that intends to use this MP Services Protocol in non-blocking
+ mode creates WaitEvent by calling the EFI CreateEvent() service. The caller
+ invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent
+ is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests
+ the function specified by Procedure to be started on all the enabled APs,
+ and releases the BSP to continue with other tasks.
+ -# The caller can use the CheckEvent() and WaitForEvent() services to check
+ the state of the WaitEvent created in step 1.
+ -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP
+ Service signals WaitEvent by calling the EFI SignalEvent() function. If
+ FailedCpuList is not NULL, its content is available when WaitEvent is
+ signaled. If all APs returned from Procedure prior to the timeout, then
+ FailedCpuList is set to NULL. If not all APs return from Procedure before
+ the timeout, then FailedCpuList is filled in with the list of the failed
+ APs. The buffer is allocated by MP Service Protocol using AllocatePool().
+ It is the caller's responsibility to free the buffer with FreePool() service.
+ -# This invocation of SignalEvent() function informs the caller that invoked
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed
+ the specified task or a timeout occurred. The contents of FailedCpuList
+ can be examined to determine which APs did not complete the specified task
+ prior to the timeout.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroseconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroseconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Service Protocol,
+ and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupAllAPs (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ );
+
+/**
This service lets the caller get one enabled AP to execute a caller-provided
function. The caller can request the BSP to either wait for the completion
of the AP or just proceed with the next task by using the EFI event mechanism.
|