summaryrefslogtreecommitdiff
path: root/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl
diff options
context:
space:
mode:
Diffstat (limited to 'Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl')
-rw-r--r--Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl177
1 files changed, 0 insertions, 177 deletions
diff --git a/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl b/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl
deleted file mode 100644
index ef1383b9c1..0000000000
--- a/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl
+++ /dev/null
@@ -1,177 +0,0 @@
-/** @file
-Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-Device(IOTD) {
- Name(_HID, "MSFT8000")
- Name(_CID, "MSFT8000")
-
- Name(_CRS, ResourceTemplate() {
- // Index 0
- SPISerialBus( // Pin 5, 7, 9 , 11 of JP1 for SIO_SPI
- 1, // Device selection
- PolarityLow, // Device selection polarity
- FourWireMode, // wiremode
- 8, // databit len
- ControllerInitiated, // slave mode
- 8000000, // Connection speed
- ClockPolarityLow, // Clock polarity
- ClockPhaseSecond, // clock phase
- "\\_SB.SPI1", // ResourceSource: SPI bus controller name
- 0, // ResourceSourceIndex
- ResourceConsumer, // Resource usage
- JSPI, // DescriptorName: creates name for offset of resource descriptor
- ) // Vendor Data
-
- // Index 1
- I2CSerialBus( // Pin 13, 15 of JP1, for SIO_I2C5 (signal)
- 0x00, // SlaveAddress: bus address (TBD)
- , // SlaveMode: default to ControllerInitiated
- 400000, // ConnectionSpeed: in Hz
- , // Addressing Mode: default to 7 bit
- "\\_SB.I2C6", // ResourceSource: I2C bus controller name (For MinnowBoard Max, hardware I2C5(0-based) is reported as ACPI I2C6(1-based))
- ,
- ,
- JI2C, // Descriptor Name: creates name for offset of resource descriptor
- ) // VendorData
-
- // Index 2
- UARTSerialBus( // Pin 17, 19 of JP1, for SIO_UART2
- 115200, // InitialBaudRate: in bits ber second
- , // BitsPerByte: default to 8 bits
- , // StopBits: Defaults to one bit
- 0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
- , // IsBigEndian: default to LittleEndian
- , // Parity: Defaults to no parity
- , // FlowControl: Defaults to no flow control
- 32, // ReceiveBufferSize
- 32, // TransmitBufferSize
- "\\_SB.URT2", // ResourceSource: UART bus controller name
- ,
- ,
- UAR2, // DescriptorName: creates name for offset of resource descriptor
- )
-
- // Index 3
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {0} // Pin 21 of JP1 (GPIO_S5[00])
- // Index 4
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {0}
-
- // Index 5
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {1} // Pin 23 of JP1 (GPIO_S5[01])
- // Index 6
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {1}
-
- // Index 7
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {2} // Pin 25 of JP1 (GPIO_S5[02])
- // Index 8
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {2}
-
- // Index 9
- UARTSerialBus( // Pin 6, 8, 10, 12 of JP1, for SIO_UART1
- 115200, // InitialBaudRate: in bits ber second
- , // BitsPerByte: default to 8 bits
- , // StopBits: Defaults to one bit
- 0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
- , // IsBigEndian: default to LittleEndian
- , // Parity: Defaults to no parity
- FlowControlHardware, // FlowControl: Defaults to no flow control
- 32, // ReceiveBufferSize
- 32, // TransmitBufferSize
- "\\_SB.URT1", // ResourceSource: UART bus controller name
- ,
- ,
- UAR1, // DescriptorName: creates name for offset of resource descriptor
- )
-
- // Index 10
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {62} // Pin 14 of JP1 (GPIO_SC[62])
- // Index 11
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {62}
-
- // Index 12
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {63} // Pin 16 of JP1 (GPIO_SC[63])
- // Index 13
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {63}
-
- // Index 14
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {65} // Pin 18 of JP1 (GPIO_SC[65])
- // Index 15
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {65}
-
- // Index 16
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {64} // Pin 20 of JP1 (GPIO_SC[64])
- // Index 17
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {64}
-
- // Index 18
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {94} // Pin 22 of JP1 (GPIO_SC[94])
- // Index 19
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {94}
-
- // Index 20
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {95} // Pin 24 of JP1 (GPIO_SC[95])
- // Index 21
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {95}
-
- // Index 22
- GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {54} // Pin 26 of JP1 (GPIO_SC[54])
- // Index 23
- GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {54}
- })
-
- Name(_DSD, Package() {
- ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
- Package(1) { // Just one Property for IOT (at this time)
- Package(2) { //The “symbolic-identifiers” property
- "symbolic-identifiers",
- Package() { //Contains all the <resource index, symbolic-identifier> pairs
- 0, "SPI0",
- 1, "I2C5",
- 2, "UART2",
- 3, 21, // Pin 21 of JP1 (GPIO_S5[00])
- 4, 21, // Pin 21 for separate resource.
- 5, 23, // Pin 23 of JP1 (GPIO_S5[01])
- 6, 23,
- 7, 25, // Pin 25 of JP1 (GPIO_S5[02])
- 8, 25,
- 9, "UART1",
- 10, 14, // Pin 14 of JP1 (GPIO_SC[62])
- 11, 14,
- 12, 16, // Pin 16 of JP1 (GPIO_SC[63])
- 13, 16,
- 14, 18, // Pin 18 of JP1 (GPIO_SC[65])
- 15, 18,
- 16, 20, // Pin 20 of JP1 (GPIO_SC[64])
- 17, 20,
- 18, 22, // Pin 22 of JP1 (GPIO_SC[94])
- 19, 22,
- 20, 24, // Pin 24 of JP1 (GPIO_SC[95])
- 21, 24,
- 22, 26, // Pin 26 of JP1 (GPIO_SC[54])
- 23, 26
- }
- }
- }
- })
-
- Method(_STA,0,Serialized) {
-
- //
- // Only report IoT virtual device when all pins' configuration follows MSFT's datasheet.
- //
- If (LEqual(IOT, 1)) {
- Return (0xF)
- }
-
- Return (0x0)
- }
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-15 15:10:44 +0000