diff options
Diffstat (limited to 'Vlv2TbltDevicePkg/Library/SerialPortLib/SioInit.h')
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/SerialPortLib/SioInit.h | 146 |
1 files changed, 68 insertions, 78 deletions
diff --git a/Vlv2TbltDevicePkg/Library/SerialPortLib/SioInit.h b/Vlv2TbltDevicePkg/Library/SerialPortLib/SioInit.h index cded45c7e1..83c119b72f 100644 --- a/Vlv2TbltDevicePkg/Library/SerialPortLib/SioInit.h +++ b/Vlv2TbltDevicePkg/Library/SerialPortLib/SioInit.h @@ -1,78 +1,68 @@ -/** @file
- Header file of Serial port hardware definition.
-
- Copyright (c) 2012 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
- The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- This software and associated documentation
- (if any) is furnished under a license and may only be used or
- copied in accordance with the terms of the license. Except as
- permitted by such license, no part of this software or
- documentation may be reproduced, stored in a retrieval system, or
- transmitted in any form or by any means without the express written
- consent of Intel Corporation.
-
- Module Name: PlatformSerialPortLib.h
-
-**/
-
-#ifndef _SIO_INIT_H_
-#define _SIO_INIT_H_
-
-#define WPCN381U_CONFIG_INDEX 0x2E
-#define WPCN381U_CONFIG_DATA 0x2F
-#define WPCN381U_CONFIG_INDEX1 0x164E
-#define WPCN381U_CONFIG_DATA1 0x164F
-#define WPCN381U_CHIP_ID 0xF4
-#define WDCP376_CHIP_ID 0xF1
-
-//
-// SIO Logical Devices Numbers
-//
-#define WPCN381U_LDN_UART0 0x03 // LDN for Serial Port Controller
-#define WPCN381U_LDN_UART1 0x02 // LDN for Parallel Port Controller
-#define WPCN381U_LDN_PS2K 0x06 // LDN for PS2 Keyboard Controller
-#define WPCN381U_LDN_PS2M 0x05 // LDN for PS2 Mouse Controller
-#define WPCN381U_KB_BASE1_ADDRESS 0x60 // Base Address of KB controller
-#define WPCN381U_KB_BASE2_ADDRESS 0x64 // Base Address of KB controller
-#define SIO_KBC_CLOCK 0x01 // 0/1/2 - 8/12/16 MHz KBC Clock Source
-#define WPCN381U_LDN_GPIO 0x07 // LDN for GPIO
-
-//
-// SIO Registers Layout
-//
-#define WPCN381U_LD_SEL_REGISTER 0x07 // Logical Device Select Register Address
-#define WPCN381U_DEV_ID_REGISTER 0x20 // Device Identification Register Address
-#define WPCN381U_ACTIVATE_REGISTER 0x30 // Device Identification Register Address
-#define WPCN381U_BASE1_HI_REGISTER 0x60 // Device BaseAddres Register #1 MSB Address
-#define WPCN381U_BASE1_LO_REGISTER 0x61 // Device BaseAddres Register #1 LSB Address
-#define WPCN381U_BASE2_HI_REGISTER 0x62 // Device BaseAddres Register #1 MSB Address
-#define WPCN381U_BASE2_LO_REGISTER 0x63 // Device Ba1eAddres Register #1 LSB Address
-#define WPCN381U_IRQ1_REGISTER 0x70 // Device IRQ Register #1 Address
-#define WPCN381U_IRQ2_REGISTER 0x71 // Device IRQ Register #2 Address
-
-//
-// SIO Activation Values
-//
-#define WPCN381U_ACTIVATE_VALUE 0x01 // Value to activate Device
-#define WPCN381U_DEACTIVATE_VALUE 0x00 // Value to deactivate Device
-
-//
-// SIO GPIO
-//
-#define WPCN381U_GPIO_BASE_ADDRESS 0x0A20 // SIO GPIO Base Address
-
-//
-// SIO Serial Port Settings
-//
-#define WPCN381U_SERIAL_PORT0_BASE_ADDRESS 0x03F8 // Base Address of Serial Port 0 (COMA / UART0)
-#define WPCN381U_SERIAL_PORT1_BASE_ADDRESS 0x02F8 // Base Address of Serial Port 1 (COMB / UART1)
-
-#endif
+/** @file + Header file of Serial port hardware definition. + + Copyright (c) 2012 - 2017, Intel Corporation. All rights reserved.<BR> +
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/ + +#ifndef _SIO_INIT_H_ +#define _SIO_INIT_H_ + +#define WPCN381U_CONFIG_INDEX 0x2E +#define WPCN381U_CONFIG_DATA 0x2F +#define WPCN381U_CONFIG_INDEX1 0x164E +#define WPCN381U_CONFIG_DATA1 0x164F +#define WPCN381U_CHIP_ID 0xF4 +#define WDCP376_CHIP_ID 0xF1 + +// +// SIO Logical Devices Numbers +// +#define WPCN381U_LDN_UART0 0x03 // LDN for Serial Port Controller +#define WPCN381U_LDN_UART1 0x02 // LDN for Parallel Port Controller +#define WPCN381U_LDN_PS2K 0x06 // LDN for PS2 Keyboard Controller +#define WPCN381U_LDN_PS2M 0x05 // LDN for PS2 Mouse Controller +#define WPCN381U_KB_BASE1_ADDRESS 0x60 // Base Address of KB controller +#define WPCN381U_KB_BASE2_ADDRESS 0x64 // Base Address of KB controller +#define SIO_KBC_CLOCK 0x01 // 0/1/2 - 8/12/16 MHz KBC Clock Source +#define WPCN381U_LDN_GPIO 0x07 // LDN for GPIO + +// +// SIO Registers Layout +// +#define WPCN381U_LD_SEL_REGISTER 0x07 // Logical Device Select Register Address +#define WPCN381U_DEV_ID_REGISTER 0x20 // Device Identification Register Address +#define WPCN381U_ACTIVATE_REGISTER 0x30 // Device Identification Register Address +#define WPCN381U_BASE1_HI_REGISTER 0x60 // Device BaseAddres Register #1 MSB Address +#define WPCN381U_BASE1_LO_REGISTER 0x61 // Device BaseAddres Register #1 LSB Address +#define WPCN381U_BASE2_HI_REGISTER 0x62 // Device BaseAddres Register #1 MSB Address +#define WPCN381U_BASE2_LO_REGISTER 0x63 // Device Ba1eAddres Register #1 LSB Address +#define WPCN381U_IRQ1_REGISTER 0x70 // Device IRQ Register #1 Address +#define WPCN381U_IRQ2_REGISTER 0x71 // Device IRQ Register #2 Address + +// +// SIO Activation Values +// +#define WPCN381U_ACTIVATE_VALUE 0x01 // Value to activate Device +#define WPCN381U_DEACTIVATE_VALUE 0x00 // Value to deactivate Device + +// +// SIO GPIO +// +#define WPCN381U_GPIO_BASE_ADDRESS 0x0A20 // SIO GPIO Base Address + +// +// SIO Serial Port Settings +// +#define WPCN381U_SERIAL_PORT0_BASE_ADDRESS 0x03F8 // Base Address of Serial Port 0 (COMA / UART0) +#define WPCN381U_SERIAL_PORT1_BASE_ADDRESS 0x02F8 // Base Address of Serial Port 1 (COMB / UART1) + +#endif |