| Age | Commit message (Collapse) | Author |
|---|
|
The code in _S3SUPPORT_ in PchAccess.h wasn't used in anywhere. Also,
The declaration of MCRX and MCR made gcc generate the error of
"multiple definition". Just remove the unused code to avoid any
potential issue.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
|
|
gBS is already defined in
MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.c
Remove the declaration of gBS and include the proper header file to
access the variable.
Suggested-by: David Wei <david.wei@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
|
|
mGlobalNvsArea wasn't declared as extern in AcpiPlatform.h and the header
was included in AcpiPlatform.c and AcpiPlatformHooks.c. Although it's
declared as extern in AcpiPlatformHooks.c, gcc still created an instance
of mGlobalNvsArea in AcpiPlatformHooks.c since the header was expanded
first and then the linker complained "multiple definition". This commit
rearrange the delaration of mGlobalNvsArea to satisfy gcc.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
Fix the following errors from gcc:
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c: In function 'PlatformUpdateTables':
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:236:63: warning: variable 'LocalApicCounter' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:214:64: warning: variable 'ProcessorLocalApicEntry' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:213:63: warning: variable 'BufferSize' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c: In function 'AcpiPlatformEntryPoint':
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c:797:33: warning: variable 'Data32' set but not used [-Wunused-but-set-variable]
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatformHooks.c: In function ?PatchGv3SsdtTable?:
Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatformHooks.c:243:31: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
Fix the following error from gcc:
Vlv2TbltDevicePkg/PlatformInitPei/PlatformEarlyInit.c: In function 'GetWakeupEventAndSaveToHob':
Vlv2TbltDevicePkg/PlatformInitPei/PlatformEarlyInit.c:147:11: error: variable 'WakeEventData' set but not used [-Werror=unused-but-set-variable]
Although the function name is "GetWakeupEventAndSaveToHob",
WakeEventData was never really used or passed to any other function.
Given the fact that the function is served as an example, it'd better to
keep the code related to WakeEventData. Just add a debug statement to
suppress the error message.
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
Fix the following errors from gcc:
Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c: In function 'IchRcrbInit':
Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c:513:36: error: variable 'PlatformCpuInfo' set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c:512:35: error: variable 'LpcRevisionID' set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformInitPei/MemoryCallback.c: In function 'EndOfPeiPpiNotifyCallback':
Vlv2TbltDevicePkg/PlatformInitPei/MemoryCallback.c:64:31: error: variable 'MemoryTop' set but not used [-Werror=unused-but-set-variable]
v2:
Also remove the variable, Hob, in PchInitPeim.c:IchRcrbInit() since
no one really uses it.
Cc: David Wei <david.wei@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
|
|
Fix the following error from gcc:
Vlv2TbltDevicePkg/Library/PlatformBdsLib/BdsPlatform.c: In function ?BdsLockFv?:
Vlv2TbltDevicePkg/Library/PlatformBdsLib/BdsPlatform.c:2170:31: error: variable ?Data? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
Fix the following error from gcc:
Vlv2TbltDevicePkg/PlatformPei/MemoryCallback.c: In function ?MemoryDiscoveredPpiNotifyCallback?:
Vlv2TbltDevicePkg/PlatformPei/MemoryCallback.c:115:20: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
Fix the following errors from gcc:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/MultiPlatformLib.c: In function ?MultiPlatformInfoInit?:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/MultiPlatformLib.c:47:14: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c: In function ?ReadClockGeneratorID?:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c:222:33: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c: In function ?ConfigurePlatformClocks?:
Vlv2TbltDevicePkg/Library/MultiPlatformLib/BoardClkGens/BoardClkGens.c:283:33: error: variable ?ClockGenID? set but not used [-Werror=unused-but-set-variable]
Also fix the coding style of MultiPlatformInfoInit()
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
We only enable "-Wno-unused-but-set-variable" for the release build
and gcc would complain that the varible passed to ASSERT_EFI_ERROR
wasn't used in the debug build. Just don't define MDEPKG_NDEBUG for
the debug build to make gcc happy with ASSERT_EFI_ERROR.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: David Wei <david.wei@intel.com>
CC: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
|
|
Take the gcc version detection from OvmfPkg/build.sh instead of the
hardcoded GCC46.
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Cc: "Lu, ShifeiX A" <shifeix.a.lu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
When creating a UNI file if there is a name conflict, add an index
from 0 to the file name
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
All MACRO values defined by the DEFINE statements
n any section (except [Userextensions] sections
other than TianoCore."ExtraFiles) of the INF or
DEC file must be expanded before processing of the file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
Support new syntax in package DEC file as below:
[Includes.Common.Private]
[Ppis.Common.Private]
[Guids.Common.Private]
[Protocols.Common.Private]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
Add a new function to test if a DIST file list
one by one to see if they can meet the requirement
of Dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
The retry mechanism will bring issue if the usb device is unplugged
from XHCI HC but s/w is trying to access it through BlockIo. The
current cmd will get device error return status, but the sequential
cmds will be timeout. This behavior will cause system unresponsive
for a long while and bring bad user experience.
So we break the retry loop if found device error.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
|
|
The original code will assert when dealing with those empty FVs.
The fix is used to solve this bug.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
|
|
DMA Remapping Reporting (DMAR) ACPI table definitions from Intel(R)
Virtualization Technology for Directed I/O (VT-D) Architecture
Specification v2.4 dated June 2016.
This replaces the DMARemappingReportingTable.h from
EdkCompatibilityPkg\Foundation\Include\IndustryStandard
Patch V2: added below defines and re-arranged the file.
EFI_ACPI_DMAR_DRHD_FLAGS_INCLUDE_PCI_ALL
EFI_ACPI_DMAR_ATSR_FLAGS_ALL_PORTS
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
|
|
In current code, PSID is processed as string and the length is 0x20.
Current code only reserved 0x20 length buffer for it, no extra buffer
for the '\0'. When driver call UnicodeStrToAsciiStrS to convert PSID,
it search the '\0' for the end. So extra dirty data saved in PSID
info which caused PSID revert action failed. This patch reserved
extra 1 byte data for the '\0'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
In the Platform Init v1.4a spec,
- Volume 1 "4.7 Status Code Service" defines the
EFI_PEI_SERVICES.ReportStatusCode() service,
- Volume 1 "6.3.5 Status Code PPI (Optional)" defines the
EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above),
- Volume 2 "14.2 Status Code Runtime Protocol" defines the
EFI_STATUS_CODE_PROTOCOL.
These allow PEIMs and DXE (and later) modules to report status codes.
Currently OvmfPkg uses modules from under
"IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above
abstractions (PPI and PROTOCOL) directly, and write the status codes, as
they are reported, to the serial port or to a memory buffer. This is
called "handling" the status codes.
In the Platform Init v1.4a spec,
- Volume 3 "7.2.2 Report Status Code Handler PPI" defines
EFI_PEI_RSC_HANDLER_PPI,
- Volume 3 "7.2.1 Report Status Code Handler Protocol" defines
EFI_RSC_HANDLER_PROTOCOL.
These allow several PEIMs and runtime DXE drivers to register callbacks
for status code handling.
MdeModulePkg offers a PEIM under
"MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both
EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE
driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe"
that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL.
MdeModulePkg also offers status code handler modules under
MdeModulePkg/Universal/StatusCodeHandler/ that depend on
EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively.
The StatusCodeHandler modules register themselves with
ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI /
EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code
through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches
the phase-matching ReportStatusCodeRouter module first, which in turn
passes the status code to the pre-registered, phase-matching
StatusCodeHandler module.
The status code handling in the StatusCodeHandler modules is identical to
the one currently provided by the IntelFrameworkModulePkg modules. Replace
the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can
decrease our dependency on IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Suggested-by: Liming Gao <liming.gao@intel.com>
Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63
[jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos]
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
we need to locate the FSP Info Header by calculating offset dynamically to
handle the scenario of FSP component is being rebased to different location.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Satya Yarlagadda <satya.p.yarlagadda@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
|
|
Commit b89919ee8f8c ("BaseTools AARCH64: override XIP module linker
alignment to 32 bytes") updated the various AARCH64 toolchain definitions
to allow SEC, PEI_CORE and PEIM modules to be built with minimal alignment
requirements even when using the AArch64 small code model which normally
requires 4 KB section alignment.
This involves conversion of ADRP instructions into ADR instructions, which
can only be done reliably if the ELF and the PE/COFF sections appear at
the same offset modulo 4 KB.
The ArmVirtPrePiUniCoreRelocatable linker script did not yet take this
into account, so update it by starting the .text section at the next
appropriately aligned offset PECOFF_HEADER_SIZE bytes into the image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
The original behavior is that in the Asbuilt inf Pcd's order is base on
the Pcd's offset. Now we change the order to keep it is same with the Pcd
order in the source inf file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The binaries of ShellBinPkg are generated with ShellPkg from b89919ee8f8c
("BaseTools AARCH64: override XIP module linker alignment to 32 bytes")
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org> # AArch64
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ARM
|
|
Now that GenFw converts small code model ADRP instructions to ADR on
the fly, we can reduce the alignment for XIP modules, where large
alignment values may cause considerable waste of flash space due to
excessive padding. This limits the module size to 1 MB, but this is
not a concern in practice.
So set the XIP section alignment to 0x20 for DEBUG_GCC49, DEBUG_GCC5
and *_CLANG35, all of which use the small code model.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
allows it
The ADRP instruction in the AArch64 ISA requires the link time and load time
offsets of a binary to be equal modulo 4 KB. The reason is that this instruction
always produces a multiple of 4 KB, and relies on a subsequent ADD or LDR
instruction to set the offset into the page. The resulting symbol reference
only produces the correct value if the symbol in question resides at that
exact offset into the page, and so loading the binary at arbitrary offsets
is not possible.
Due to the various levels of padding when packing FVs into FVs into FDs, this
alignment is very costly for XIP code, and so we would like to relax this
alignment requirement if possible.
Given that symbols that are sufficiently close (within 1 MB) of the reference
can also be reached using an ADR instruction which does not suffer from this
alignment issue, let's replace ADRP instructions with ADR after linking if
the offset can be encoded in this instruction's immediate field. Note that
this only makes sense if the section alignment is < 4 KB. Otherwise,
replacing the ADRP has no benefit, considering that the subsequent ADD or
LDR instruction is retained, and that micro-architectures are more likely
to be optimized for ADRP/ADD pairs (i.e., via micro op fusing) than for
ADR/ADD pairs, which are non-typical.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This adds support for GCC 5.x in LTO mode for IA32, X64, ARM and
AARCH64. Due to the fact that the GCC project switched to a new
numbering scheme where the first digit is now incremented for every
major release, the new toolchain is simply called 'GCC5', and is
intended to support all GCC v5.x releases.
Since IA32 and X64 enable compiler optimizations (-Os) for both DEBUG
and RELEASE builds, LTO support is equally enabled for both targets.
On ARM and AARCH64, DEBUG builds are not optimized, and so the LTO
optimizations are only enabled for RELEASE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Recent versions of GNU ld automatically emit a .notes section into
the ELF binary containing a build id. Since this is an allocatable
section by default, it will be identified by GenFw as a section
that requires PE/COFF conversion, which may cause sections to be
moved around unexpectedly.
So retain the section, but tag it as INFO, which tells the linker
that it should not be accounted for in the binary's memory layout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
GCC in LTO mode interoperates poorly with non-standard libraries that
provide implementations of compiler intrinsics such as memcpy/memset
or the stack protector entry points. Such libraries need to be built
in non-LTO mode, and then referenced explicitly on the linker command
line using a -plugin-opt=-pass-through=-lxxx linker option.
However, if these intrinsics are also referenced directly, the LTO
version of the code will be pulled in, and will happily satisfy all
other references to the same symbol.
So add a pair of glue libraries, for ARM and AARCH64, that reference
the known intrinsics. Since the binaries live under ArmPkg directly,
we can reference them in tools_def.txt. Under LD garbage collection,
the object itself will be pruned, and so will the intrinsics that end
up unused by the module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
To accommodate upcoming GCCx toolchain versions that require 'gcc' to
be used as the linker in order to support LTO, switch GCC44 and later
(including CLANG35) to a new DLINK build rule that invokes 'gcc' as the
linker instead of 'ld'. Since gcc expects its command line arguments in
a different format, and expects arguments that it needs to pass to the
linker to be prefixed with '-Wl,', this involves changes to most of the
DLINK_FLAGS definitions in tools_def.template, as well as some changes to
module .INF files that set their own linker options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Before we can make non-backward compatible changes to the GCC build rules
regarding the use of the 'gcc' binary as the linker, clone the existing
GCC build rules into a 'GCCLD' build rule family, and move the legacy
toolchains UNIXGCC, CYGGCC, CYGGCCxASL and ELFGCC over to it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Newer versions of ld automatically emit .gnu.hash and .note.gnu.build-id
sections, which are not listed in the linker script, and will end up
breaking the build with an allocation conflict, e.g.,
/usr/bin/aarch64-linux-gnu-ld: section .note.gnu.build-id loaded at
[0000000000000000,0000000000000023] overlaps section .text loaded at
[0000000000000000,0000000000017dbf]
Since we don't require or care about these sections, update the linker
script so that they are discarded. Note that this involves emitting the
.note.gnu.build-id section into a non-allocatable segment to prevent the
linker from noticing that it is being discarded (and subsequently
complaining about it)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Some versions of Clang fail on every input file when using the
-save-temps options, and produces the following heplful error message:
<unknown>:0: error: Undefined temporary symbol
Simply dropping the option for CLANG35 is the simplest way around this,
since the value of storing .i and .s files is dubious anyway.
Also, drop the arm-use-movt option, which does not appear to be
supported anymore by recent versions of clang.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
When using GCC to build for X64, we switched to the position independent
small code model, which is much more efficient in terms of code generation
and runtime relocation footprint, and produces binaries that can execute
correctly from any offset.
However, the PIC routines are by default geared towards hosted binaries
containing symbol references that may resolve to definitions in other
dynamic objects, and for this reason, most symbol references are indirected
via a GOT entry (which also results in a .reloc fixup entry) unless we
annotate them.
For this reason, we introduced the 'protected' visibility annotation for
all symbol definitions and references, by setting the GCC visibility
pragma. However, as it turns out, this is not sufficient for all versions
of GCC, and in some cases (GCC 5.x using the GCC49 toolchain tag), may
still result in GOT based relocations.
So switch to 'hidden' visibility instead, which is slightly stronger, and
fixes this issue for the versions of GCC that exhibit the problem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
ArmLib defines a prototype for the ArmReadSctlr() function, but the
AArch64 implementation is missing. So add it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: John Powell <john.powell@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
[ardb: update commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
After add LoadFileOnFv2, PlatformBootManagerLib doesn't need to find Shell
application from FV.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
This driver searches APPLICATION in FV and installs LoadFile protocol
for every found one. Then, BDS will add BootOption for LoadFile protocol.
It provides the generic way to expose boot option for the internal
application, such as Shell. With this driver, PlatformBds doesn?t need
to specially handle Shell application.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Update boot description to support LoadFile protocol based on FV file.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
New LoadFileOnFv2 driver will install LoadFile protocol based on FV file.
Update UefiBootManagerLib to find BootMenuApp with LoadFile protocol.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
This function abstracts the common logic to find BootMenuApp file.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Edk2 enables Os option and ms_va_list in GCC tool chain.
This change makes VA_LIST is not pointer, and cause GCC failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
This is an sample WSMT table, which we only
update BIT0 and BIT1 of Protections flags fields.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: lushifex <shifeix.a.lu@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
|
|
According to PI spec,EndOfDxe Event should be signaled
before DxeSmmReadyToLock protocol installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: lushifex <shifeix.a.lu@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Change RESET_VALUE of ACPI FADT to 0x0E, which could trigger full reset.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <david.wei@intel.com>
|
|
Fix a bug of checking duplicate GUID
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
