summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-06ArmPlatformPkg: Give a name to the FVOlivier Martin
By default, a MemoryMap() EFI Device Path is created for the Firmware Volumes. It means it is difficult to build a Non-Volatile permanent Device Path for the Firmware Volume as the location in System Memory may change. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17827 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06ArmPlatformPkg/Bds: Restore the setting of the FDT device path in the boot ↵Ronald Cron
manager People has requested this feature to be restaured in the ARM Boot Manager. The configuration from the EFI Shell is always possible and it is the recommended approach to update the FDT Device Path. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <Olivier.Martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17826 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06ArmVirtPkg: build runtime drivers with 64 KB section alignmentArd Biesheuvel
This adds the 64 KB alignment overlay linker script to the linker command line of DXE_RUNTIME_DRIVER modules. This makes these modules compatible with the new Properties Table feature by aligning the .text and .data sections to 64 KB. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <Olivier.Martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17825 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06BaseTools: AArch64: use explicit linker scriptsArd Biesheuvel
Instead of relying on the builtin linker script of GNU ld, which may vary based on binutils version (which is not tightly coupled to the GCC version) and linker command line options, introduce a linker script for AArch64 to be used by all GCC/binutils versions. The script is laid out such that two ELF sections .text and .data are created that map onto the PE/COFF with the same names. By aligning .data to the minimum alignment of .text, and by not adding any additional padding -which is what LD's builtin linker script does- the relative offset between .text and .data is retained after the PE/COFF conversion. This should prevent problems with debuggers and other tooling that are ELF based. Also provided is an overlay linker script that increases the alignment of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER modules, to make them compatible with the newly introduced Properties Table feature. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <Olivier.Martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17824 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06MdePkg: Fix bug in CatVSPrint introduced by r17742.Heyi Guo
Just use a more conservative way to replace unsafe StrCpy. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Heyi Guo <heyi.guo@linaro.org> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Qiu Shumin <shumin.qiu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17823 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06BaseTools/Build: Fix the range expression evaluation error.Bob Feng
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: "Bob Feng" <bob.c.feng@intel.com> Reviewed-by: "Chen, Hesheng" <hesheng.chen@intel.com> Reviewed-by: "Liu, Yingke D" <yingke.d.liu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17822 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-04ShellPkg: Fix bug introduced by r17730.Heyi Guo
CurrentFilePattern is only part of FilePattern and will be less than or equal to FilePattern. If we use StrCpyS to replace StrnCpy, it will cause assert when FilePattern is longer. The bug can be replayed when we cd to one directory and run ls command. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Heyi Guo <heyi.guo@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Qiu Shumin <shumin.qiu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17821 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-03SecurityPkg: Calculate the length of the String.Zhang Lubo
When the two concatenated strings are both not null, the total length in bytes of them should calculate the character '\0' once. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: jiaxinwu <jiaxin.wu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17820 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-03SourceLevelDebugPkg: Fix PEI debug timer regressionBrian J. Johnson
Recent changes to debug timer handling ended up leaving the timer disabled in PEI. This made it impossible to stop execution in PEI externally via the debugger. Enable the timer when InitializeDebugAgent calls InitializeDebugAgentPhase2, as well as when it returns directly. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Brian J. Johnson <bjohnson@sgi.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17819 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-03MdeModulePkg: Refine code to make it more readable.Qiu Shumin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17818 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-03Maintainers.txt: Added co-maintainer for MdePkg/IntelFrameworkPkg/ShellPkgHot Tian
Liming Gao a co-maintainer for the MdePkg Jeff Fan a co-maintainer for the IntelFrameworkPkg Shumin Qiu a co-maintainer for the ShellPkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hot Tian <hot.tian@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17817 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02ShellPkg: fix string to number conversion with "0 "Jaben Carsey
also fixes a few out of date comments. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Tapan Shah <tapandshah@hp.com> Reviewed-by: Qiu Shumin <shumin.qiu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17816 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: Correct AuthVaribleLib to AuthVariableLib in LibraryClass pathStar Zeng
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17815 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: Fix EBC build failureStar Zeng
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17814 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: Merge GCD range before convert it to EFI memoryLiming Gao
GCD Range is byte address. EFI memory range is page address. To make sure GCD range is converted to EFI memory range, the following things are added: 1. Merge adjacent GCD range first. 2. Add ASSERT check on GCD range alignment. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17813 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: enforce arch-specific alignment for split regionsArd Biesheuvel
The splitting of memory regions into code and data regions violates architecture specific alignment rules by using a fixed alignment of 4 KB. Replace it with EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT, which is defined appropriately on each architecture. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: "Jaben Carsey" <jaben.carsey@intel.com> Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17812 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: move arch-specific allocation granularity defines to DxeMain.hArd Biesheuvel
Move the definitions of EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT and DEFAULT_PAGE_ALLOCATION to DxeMain.h to make them available explicitly to all parts of DxeCore. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17811 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: rename PropertiesTableEnable to PcdPropertiesTableEnableArd Biesheuvel
PCD names should start with 'Pcd' so rename PropertiesTableEnable to PcdPropertiesTableEnable. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17810 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: make internal functions STATIC in Core/Dxe/Misc/PropertiesTable.cArd Biesheuvel
Add STATIC to functions that are only used internally. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: "Jaben Carsey" <jaben.carsey@intel.com> Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17809 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: remove unused functions from Core/Dxe/Misc/PropertiesTable.cArd Biesheuvel
This removes the functions RevertRuntimeMemoryMap () and DumpMemoryMap () which are not referenced anywhere in the code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17808 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02Revert tree to r17801Jordan Justen
Revert r17802 "BaseTools: AArch64: use explicit linker scripts" Revert r17803 "ArmVirtPkg: build runtime drivers with 64 KB section alignment" Revert r17804 "IntelFrameworkModulePkg: AcpiS3SaveDxe: prepare for End-of-Dxe callback" Revert r17805 "IntelFrameworkModulePkg: AcpiS3SaveDxe: call S3Ready() at End-of-Dxe" Revert r17806 "OvmfPkg: AcpiS3SaveDxe: prepare for End-of-Dxe callback" Requested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17807 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02OvmfPkg: AcpiS3SaveDxe: prepare for End-of-Dxe callbackLaszlo Ersek
We are preparing for detaching the S3Ready() functionality from the EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() protocol member function. Instead, we will hook the same logic to the End-of-Dxe event group. The EFI_ACPI_S3_SAVE_PROTOCOL has another member: GetLegacyMemorySize(). According to the documenation, This function returns the size of the legacy memory (meaning below 1 MB) that is required during an S3 resume. Before the Framework-based firmware transfers control to the OS, it has to transition from flat mode into real mode in case the OS supplies only a real-mode waking vector. This transition requires a certain amount of legacy memory. After getting the size of legacy memory below, the caller is responsible for allocating the legacy memory below 1 MB according to the size that is returned. The specific implementation of allocating the legacy memory is out of the scope of this specification. When EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() is called, the address of the legacy memory allocated above must be passed to it, in the LegacyMemoryAddress parameter. In practice however: - The S3Ready() function ignores the LegacyMemoryAddress completely. - No code in the edk2 tree calls EFI_ACPI_S3_SAVE_PROTOCOL.GetLegacyMemorySize(), ever. - All callers of this specific implementation of EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() in the edk2 tree pass a NULL LegacyMemoryAddress: BdsLibBootViaBootOption() [IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c] For this reason, ASSERT() explicitly that LegacyGetS3MemorySize() is never called, and that the LegacyMemoryAddress parameter is always NULL. This fact is important to capture in the code, because in the End-of-Dxe callback, no LegacyMemoryAddress parameter can be taken. So let's make it clear that we actually don't even have any use for that parameter. This patch ports the identical change from IntelFrameworkModulePkg to OvmfPkg. Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17806 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02IntelFrameworkModulePkg: AcpiS3SaveDxe: call S3Ready() at End-of-DxeLaszlo Ersek
Call S3Ready() whenever the first of the following occurs: - a driver signals End-of-Dxe, - a driver calls EFI_ACPI_S3_SAVE_PROTOCOL.S3Save(). S3Ready() already contains a static, function scope "latch" that causes it to exit early when called for the second time or later. (At the moment, the only platform in the edk2 tree that includes this driver is Vlv2TbltDevicePkg. That platform does not signal End-of-Dxe (yet).) http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16146 Suggested-by: Yao Jiewen <jiewen.yao@intel.com> Cc: Yao Jiewen <jiewen.yao@intel.com> Cc: Jeff Fan <jeff.fan@intel.com> Cc: David Wei <david.wei@intel.com> Cc: Tim He <tim.he@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17805 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02IntelFrameworkModulePkg: AcpiS3SaveDxe: prepare for End-of-Dxe callbackLaszlo Ersek
We are preparing for detaching the S3Ready() functionality from the EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() protocol member function. Instead, we will hook the same logic to the End-of-Dxe event group. The EFI_ACPI_S3_SAVE_PROTOCOL has another member: GetLegacyMemorySize(). According to the documenation, This function returns the size of the legacy memory (meaning below 1 MB) that is required during an S3 resume. Before the Framework-based firmware transfers control to the OS, it has to transition from flat mode into real mode in case the OS supplies only a real-mode waking vector. This transition requires a certain amount of legacy memory. After getting the size of legacy memory below, the caller is responsible for allocating the legacy memory below 1 MB according to the size that is returned. The specific implementation of allocating the legacy memory is out of the scope of this specification. When EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() is called, the address of the legacy memory allocated above must be passed to it, in the LegacyMemoryAddress parameter. In practice however: - The S3Ready() function ignores the LegacyMemoryAddress completely. - No code in the edk2 tree calls EFI_ACPI_S3_SAVE_PROTOCOL.GetLegacyMemorySize(), ever. - All callers of EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() in the edk2 tree pass a NULL LegacyMemoryAddress: BdsLibBootViaBootOption() [IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c] OnReadyToBoot() [Vlv2TbltDevicePkg/AcpiPlatform/AcpiPlatform.c] InstallReadyToLock() [Vlv2TbltDevicePkg/Library/PlatformBdsLib/BdsPlatform.c] BdsLibBootViaBootOption() [Vlv2TbltDevicePkg/Override/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c] For this reason, ASSERT() explicitly that LegacyGetS3MemorySize() is never called, and that the LegacyMemoryAddress parameter is always NULL. This fact is important to capture in the code, because in the End-of-Dxe callback, no LegacyMemoryAddress parameter can be taken. So let's make it clear that we actually don't even have any use for that parameter. Cc: Yao Jiewen <jiewen.yao@intel.com> Cc: Jeff Fan <jeff.fan@intel.com> Cc: David Wei <david.wei@intel.com> Cc: Tim He <tim.he@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17804 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02ArmVirtPkg: build runtime drivers with 64 KB section alignmentArd Biesheuvel
This adds the 64 KB alignment overlay linker script to the linker command line of DXE_RUNTIME_DRIVER modules. This makes these modules compatible with the new Properties Table feature by aligning the .text and .data sections to 64 KB. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17803 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02BaseTools: AArch64: use explicit linker scriptsArd Biesheuvel
Instead of relying on the builtin linker script of GNU ld, which may vary based on binutils version (which is not tightly coupled to the GCC version) and linker command line options, introduce a linker script for AArch64 to be used by all GCC/binutils versions. The script is laid out such that two ELF sections .text and .data are created that map onto the PE/COFF with the same names. By aligning .data to the minimum alignment of .text, and by not adding any additional padding -which is what LD's builtin linker script does- the relative offset between .text and .data is retained after the PE/COFF conversion. This should prevent problems with debuggers and other tooling that are ELF based. Also provided is an overlay linker script that increases the alignment of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER modules, to make them compatible with the newly introduced Properties Table feature. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17802 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02BaseTools/Ecc: Fix a bug when checking copyright formatHess Chen
Fix a bug to only checking the copyright listed in config.ini file. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hess Chen <hesheng.chen@intel.com> Reviewed-by: YangX Li <yangx.li@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17801 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02BaseTools/Ecc: Fix a bug to get correct member variableHess Chen
Fix a bug to get correct member variable by ignoring 'OPTIONAL' modifier Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hess Chen <hesheng.chen@intel.com> Reviewed-by: YangX Li <yangx.li@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17800 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: Update DxeCore to handle LoadFile DevicePathLiming Gao
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource information, the BootURI device path node will be updated to include the BootURI information. It means the device path on the child handle will be updated after the LoadFile() service is called. To handle this case, DxeCore LoadImage() service is updated as the below: 1) Get Device handle based on Device Path 2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer. 3) Retrieve DevicePath from Device handle Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17799 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: UefiBootManagerLib to handle LoadFile DevicePathLiming Gao
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource information, the BootURI device path node will be updated to include the BootURI information. It means the device path on the child handle will be updated after the LoadFile() service is called. To handle this case, UefiBootManagerLib BmGetLoadOptionBuffer API is updated as the below: 1) Get Device handle based on Device Path 2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer. 3) Retrieve DevicePath from Device handle Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17798 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg: SecurityManagementLib to handle LoadFile DevicePathLiming Gao
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource information, the BootURI device path node will be updated to include the BootURI information. It means the device path on the child handle will be updated after the LoadFile() service is called. To handle this case, SecurityManagementLib ExecuteSecurityHandlers API is updated as the below: 1) Get Device handle based on Device Path 2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer. 3) Retrieve DevicePath from Device handle Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17797 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02BaseTools: Fixed BuildOptions bug.Yingke Liu
The BuildOptions in an INF should also follow override rule: If '==' is used, all previous options are overridden. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Yingke Liu <yingke.d.liu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17796 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02ShellPkg: Refine the code logic of StrnCatGrow.Qiu Shumin
In order to indicate the catena length use StrnCatS instead of StrCatS to generate Destination string, and update the DestMax of Destination string. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Tapan Shah <tapandshah@hp.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17795 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02MdeModulePkg Variable: Minor enhancement to VarCheckStar Zeng
1. When Property->Attributes == 0, don't check input Attributes. 2. Enhance comments to be indent aligned and debug message to be aligned with other messages. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17794 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdePkg: Add P2P Bridge Secondary Latency Timer register definitionSamer El-Haj-Mahmoud
Add P2P Bridge Secondary Latency Timer register definition to Pci22.h Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17793 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01BaseTools: Add missing EfiPersistentMemory to EFI_MEMORY_TYPESamer El-Haj-Mahmoud
To sync with the EFI_MEMROYT_TYPE definition in MdePkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17792 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01CorebootModulePkg: Get power management register addresses.Guo Dong
This patch will get power management event register address and power management GPE enable register address. Add missing code in CbParseLib.c. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Guo Dong <guo.dong@intel.com> Reviewed-by: Maurice Ma <maurice.ma@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17791 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01Fixed a couple of typos of 'Configuration' ('Congfiguration') in ↵Bruce Cran
Vlv2TbltDevicePkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Bruce Cran <bruce.cran@gmail.com> Reviewed-by: Shifei Lu <shifeix.a.lu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17790 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Universal/Variable: Use safe string functions to refine code.Qiu Shumin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17789 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Universal/SmbiosDxe: Use safe string functions to refine code.Qiu Shumin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17788 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Universal/PlatformDriOverrideDxe: Use safe string functions to ↵Qiu Shumin
refine code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17787 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Universal/PCD: Use safe string functions to refine code.Qiu Shumin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17786 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Universal/FvSimpleFileSystemDxe: Use safe string functions to ↵Qiu Shumin
refine code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17785 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Universal/CapsuleRuntimeDxe: Use safe string functions to ↵Qiu Shumin
refine code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17784 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Universal/CapsulePei: Use safe string functions to refine code.Qiu Shumin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17783 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Library/UefiBootManagerLib: Use safe string functions to refine ↵Qiu Shumin
code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17782 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Library/SmmCorePerformanceLib: Use safe string functions to ↵Qiu Shumin
refine code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17781 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Library/PeiPerformanceLib: Use safe string functions to refine ↵Qiu Shumin
code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17780 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode: Use safe string ↵Qiu Shumin
functions to refine code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17779 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01MdeModulePkg/Library/DxeCorePerformanceLib: Use safe string functions to ↵Qiu Shumin
refine code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17778 6f19259b-4bc3-4df7-8a09-765794883524
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 06:00:59 +0000