summaryrefslogtreecommitdiff
path: root/ArmPlatformPkg/ArmJunoPkg
AgeCommit message (Collapse)Author
2016-02-18ArmPlatformPkg: Remove orphaned Juno MakefileLeif Lindholm
The Juno .dsc and .fdf files were recently deleted (currently held in OpenPlatformPkg), but a spurious Makefile for building using it was left in place. Drop the Makefile to complete the cleanup. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
2016-02-16ArmPlatformPkg: delete Juno ACPI tablesLeif Lindholm
Juno is now managed in OpenPlatformPkg, including the ACPI tables - so delete this unmaintained copy. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
2016-02-12ArmPlatformPkg/ArmJunoPkg: only have 1 PCD for the FDTRyan Harkin
Juno doesn't have lots of DTB files in NOR flash, it only has 1 file, called "board.dtb" and the motherboard configuration makes the right choice about which DTB file gets written as board.dtb in NOR. The code attempts to select which DTB it should use based on the board variant or configuration. And this doesn't work because those DTB files aren't present in NOR flash. So remove the DTB variants and only load board.dtb. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2016-02-12ArmPlatformPkg/ArmJunoPkg: don't create default boot entriesRyan Harkin
Code was inserted to create default boot entries for Juno R1. These don't work, but they are also preventing the board from booting into the default options that Intel BDS would otherwise boot. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2016-02-09ArmPlatformPkg: remove ArmJuno.dsc/fdfRyan Harkin
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1]. Currently, Juno exists both in EDK2's ArmPlatformPkg and in OpenPlatformPkg [2]. And they are starting to diverge, with OpenPlatformPkg being the most up-to-date with current developments. To prevent this divergence, remove the .dsc and .fdf files from ArmPlatformPkg and leave OpenPlatformPkg as the master. We can't remove ArmJuno.dec yet because ACPI still uses it to set the include path to ArmPlatform.h. [1] https://git.linaro.org/uefi/OpenPlatformPkg.git [2] https://git.linaro.org/uefi/OpenPlatformPkg.git/tree/master:/Platforms/ARM/Juno Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
2015-12-14ArmPlatformPkg/ArmJunoLib: use declared PPI rather than module local varArd Biesheuvel
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under [Ppis] in the library's .inf so there is no need to copy it into a module local variable. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19240 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-27ArmPlatformPkg/ArmJunoDxe: drop bogus gArmGlobalVariableGuid dependencyArd Biesheuvel
ArmJunoDxe does not use gArmGlobalVariableGuid so drop the declaration from the .inf. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18999 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-27ArmPlatformPkg: drop ArmPlatformGlobalVariableLib resolutionsArd Biesheuvel
We can remove all mention of ArmPlatformGlobalVariableLib now that there are no remaining [transitive] dependencies on it. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18988 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-26ArmPlatformPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkgStar Zeng
It is also to integrate PL011SerialPortExtLib to PL011SerialPortLib. Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18971 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-03ArmPlatformPkg: Juno - add correct SPI interrupt numbers for MSIJeremy Linton
The JunoR1 has a GICv2m which is a GICv2 with a little piece of hardware that has some memory mapped locations that can trigger traditional SPI interrupts. This allows some basic PCIe MSI capabilities. Setup the SPI range that is mapped by the MSI window. This range is described in the JunoR1 SoC TRM, table 3-3. Under Interrupt ID 244-351 is described as "GICv2m PCI Express MSI". In the future when these tables are generated programmatically the information may be found in the MSI_TYPER register as well. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18723 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-19Update the ACPI device information for ARM Juno.Jeremy Linton
These patches correct a number of problems with the JUNO ACPI tables. First, put CCA attributes on the devices which can do DMA. This is because the linux kernel now requires ARM64 devices specify a coherency model. Without CCA the devices are unable to perform DMA. Update the EHCI window to a full 64k as documented in the Juno Platform SoC TRM. This makes it match the values used in some other places. Finally, add some _DSD entries for the SMSC ethernet chip. The latter changes are required for the mainline kernels to use the adapter. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18628 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-19ArmPlatformPkg: CRLF fixups for Juno ACPILeif Lindholm
All of AcpiSsdtRootPci.asl and some bits of Gtdt.aslc used LF-only line separators. Fix before committing new modifications. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18627 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-07ArmPlatformPkg: Fixes for Juno ACPISupreeth Venkatesh
1. Change Interrupt for Juno PCI Routing table Interrupt Number Reference: http://www.arm.com/files/pdf/DDI0515D1a_juno_arm_development_platform_soc_trm.pdf table 3-3 page 3-7 2. Support for PCI IO range with ACPI on JUNO Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18576 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-06ArmPlatformPkg/ArmJunoPkg/Madt.aslc: Fix MADT header versionSudeep Holla
Currently the MADT signature and revision is mapped to v1.0 macros which results in MADT with incorrect entries in the header for Juno. This patch fixes these EFI_ACPI_*_0_MULTIPLE_APIC_DESCRIPTION_TABLE macros by using appropriate v5.0 versions. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18572 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-25ArmPlatformPkg: Link separated VarCheckUefiLib NULL class library instanceStar Zeng
Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18291 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-12ArmPlatformPkg: remove mention of ARMGCC and ARMLINUXGCCArd Biesheuvel
Remove the ARMGCC and ARMLINUXGCC from comments in the respective Makefiles of ArmPlatformPkg and ArmJunoPkg. Also drop the wildly outdated Versatile Express instructions, since they refer to ARMGCC as well. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18209 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-10ArmPlatformPkg/ArmJunoPkg: use TE 'auto' alignment for SEC modulesArd Biesheuvel
No need to hardcode the TE alignment anymore, now that GenFw sets the PE/COFF alignment according to the alignment requirements of the ELF input sections. Also enable FIXED FFS placement so that we can reclaim some of the space wasted to padding when using clang with 4 KB section alignment. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18195 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-10ArmPlatformPkg/ArmJunoPkg: use a rodata symbol for ReferenceAcpiTableArd Biesheuvel
The ACPI .aslc files contain a ReferenceAcpiTable() function whose sole purpose is to ensure that the table itself does not get optimized away. However, when using clang, these dummy functions result in a 4 KB section alignment requirement, which is silly since everything except the .data section is discarded later anyway. So instead, make ReferenceAcpiTable a CONST pointer to VOID*. This way, we still have a .text section, which is mandatory for the PE/COFF conversion, but no executable code with small model relocations that impose additional alignment requirements. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18194 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-14ArmPlatformPkg: Use LinuxLoader.efi for the default boot entryOlivier Martin
There are still ARM/AArch64 Linux kernels that do not support EFI Stub. By using the EFI Linux loader as the default option we can boot any Linux kernel from UEFI as Linux kernel with EFI stub can also be booted with the legacy way. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17975 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-14ArmPlatformPkg: Remove Linux specific boot pathOlivier Martin
PcdDefaultBootType has been removed when the embedded Linux Loader has been removed from BdsLib. The boot arguments (defined by PcdDefaultBootArgument) are now always targetting EFI applications. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17971 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-14ArmPlatformPkg: Add the LinuxLoader.efi EFI applicationRonald Cron
Add the legacy Linux Loader EFI application to the ARM development platforms. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <Olivier.Martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17968 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-10ArmPlatformPkg: Remove Ip4ConfigDxe from ArmPlatformPkgJiaxin Wu
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol, which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)). Therefore we can remove Ip4ConfigDxe driver from this build. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17911 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06ArmPlatformPkg: Give a name to the FVOlivier Martin
By default, a MemoryMap() EFI Device Path is created for the Firmware Volumes. It means it is difficult to build a Non-Volatile permanent Device Path for the Firmware Volume as the location in System Memory may change. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17827 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-27ArmPlatformPkg/ArmJunoDxe: Fixed PCI Root bridge device pathOlivier Martin
The PCI Root bridge is defined by PciRoot(0x0)/Pci(0x0,0x0). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17528 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-27ArmPlatformPkg/ArmJunoPkg/Madt.aslc: Added GIC MSI Frame TableOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17524 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-27ArmPlatformPkg/ArmJunoPkg: ACPI PCI SupportOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <Olivier.Martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17522 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-12ArmPlatformPkg/ArmJunoDxe: Fix buildOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17420 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-11ArmPlatformPkg/ArmJunoPkg: Only enable PCI support on Juno R1Olivier Martin
PCI support is only present on Juno R1. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17415 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-11ArmPlatformPkg/ArmJunoPkg: Enable PCI and SATA supportOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17414 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-11ArmPlatformPkg/ArmJunoPkg: Added PCI supportOlivier Martin
Added driver for the Juno R1 root complex. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17412 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-06ArmPlatformPkg/ArmJunoDxe: Use different UID for PCI EmulationOlivier Martin
We keep UID=0 for the 'real' PCI root complex on the Juno board. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17342 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-05ArmPlatformPkg: Removed duplicate PCD settingsOlivier Martin
PcdOverridePlatformFdt was set with its default value. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17306 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-05ArmPlatformPkg: Move the FDT platform driver at the end of the driver listOlivier Martin
The Fdt platform driver has been moved at the end of the list of the DXE/UEFI drivers to ensure the device drivers have been dispatched prior to load the FDT platform driver. For instance, if we want to load FDT from TFTP we must have the ethernet driver to be already loaded. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17305 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-14ArmPlatformPkg: do not fulfil MemoryInitPeiLib dependency directly via .c fileArd Biesheuvel
MemoryInitPeim short-circuits its MemoryInitPeiLib dependency by including the .c file directly. This prevents us from having a special implementation for ArmVirtualizationPkg that performs additional cache maintenance before enabling the MMU. So instead, make it depend on the library class. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17175 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-08ArmPlatformPkg: Use LzmaDecompress support from MdeModulePkgOlivier Martin
LzmaDecompress support is moving from IntelFrameworkPkg to MdeModulePkg. This change ensures ArmPlatformPkg reflects this future change. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <ronald.cron@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17133 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-01ArmPlatformPkg/ArmJunoDxe: Fixed returned valueOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17098 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-01ArmPlatformPkg/ArmJunoPkg/ArmJuno.dec: Update Juno R0 Device Tree default nameOlivier Martin
The default name should match the legacy Juno R0 name (ie: juno.dtb) to ensure the updated UEFI firmware still works on the deployed Juno R0 board. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17097 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-01ArmJunoPkg: Upate Juno R1 Device Tree names to be 8 characters longOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17096 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-01ArmPlatformPkg/ArmJunoDxe: Add PCI GBE MAC address to Juno R1 boot optionsRonald Cron
On Juno R1, the MAC address assigned to the PCI Gigabyte Ethernet device as to be passed to the Linux Kernel. The MAC address is passed to the Linux Kernel by means of the boot argument "sky2.mac_address". This patch adds this boot argument to the lists of boot arguments of the two Juno R1 default boot options. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <ronald.cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17095 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-26ArmPlatformPkg/ArmJunoPkg: Create two default boot entries on first boot on ↵Olivier Martin
Juno R1 Juno R1 can run in two configurations: - A57x2 - A57x2-A53x4 The Device Tree tell Linux which configuration has been selected. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16942 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-26ArmPlatformPkg/ArmJunoPkg: Update with Juno R1 device tree namesOlivier Martin
Juno R1 support two configurations: - A57x2 - A57x2-A53x4 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16941 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-26ArmPlatformPkg/Bds: Remove any use of the "Fdt" UEFI variableRonald Cron
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as the "setfdt" EFI Shell command provides this service from now. Remove the use of this variable in the legacy kernel boot loader and use the FDT installed in the configuration table instead. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-26ArmPlatformPkg/ArmJunoDxe: Set the platform dependent FDT device pathRonald Cron
The MIDR register of the CPU on which the UEFI firmware is running on is used to infer if the platform is a Juno r0 or a Juno r1. The right device path to the platform FDT is then stored in the "gEmbeddedTokenSpaceGuid.PcdFdtDevicePaths" dynamic PCD. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16939 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-26ArmPlatformPkg/ArmJunoPkg : Use FdtPlatformDxe driver to install the FDTRonald Cron
Remove the installation of the FDT for Juno into the UEFI Configuration Table from the Juno specific DXE driver. Use the FdtPlatformDxe driver to do it instead. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16938 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-25ArmPlatformPkg/ArmJuno: Use EFI Stub and updated the command lineOlivier Martin
- 'earlycon' is the new name for 'earlyprintk' - Support Linux EFI stub by default - The command line is expected to be in unicode when booting an EFI application. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16928 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-04ArmPlatformPkg/ArmJunoDxe: Added missing headerOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16756 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-23ArmPlatformPkg/ArmJunoPkg/AcpiTables: Updated with new ACPI 5.1 Tables & ↵Olivier Martin
Definitions Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16654 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-23ArmPlatformPkg/ArmJunoPkg: Added the ACPI 5.0 TablesOlivier Martin
These tables are: - Differentiated System Description Table Fields (DSDT) - Firmware ACPI Control Structure (FACS) - Fixed ACPI Description Table (FADT) - Generic Timer Description Table (GTDT) - Multiple APIC Description Table (MADT) - Secondary System Description Table Fields (SSDT) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16652 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-23ArmPlatformPkg/ArmJunoPkg: Added ACPI supportOlivier Martin
This support makes the Juno UEFI Firmware to look into the Firmware Volume for the ACPI Tables. But it does not provide the ACPI Tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16651 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-06ArmPlatformPkg/Bds: Signal when the variable 'Fdt' has been updatedOlivier Martin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16589 6f19259b-4bc3-4df7-8a09-765794883524
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 10:32:33 +0000