Age | Commit message (Collapse) | Author |
|
The indexes have been reversed compare to the specification which
created confusions in some MMC responses.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12132 6f19259b-4bc3-4df7-8a09-765794883524
|
|
- Build BeagleBoardPkg, ArmRealViewEb-A8, ArmRealView-A9x2 and ArmVExpress-CTA9x4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12055 6f19259b-4bc3-4df7-8a09-765794883524
|
|
SEC and PEI_CORE modules
This library that uses the DebugAgentLib interface prints the loaded addresses
of the SEC and PEI_CORE module using PeCoffExtraActionLib.
Note: Because there is no PE loader for these XIP modules, PeCoffExtraActionLib is not invoked.
This library scans the firmware volume to find these modules and calculate their fixup loaded
addresses used to load their symbols in the debugger.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12023 6f19259b-4bc3-4df7-8a09-765794883524
|
|
- Give an overview of the different possible boot phases on ARM platforms (using
EDK2 for the full boot story or limiting its use to the last boot sequence)
- Show which functions to implement in ArmPlatformLib following the the boot phases
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12004 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12001 6f19259b-4bc3-4df7-8a09-765794883524
|
|
descriptions and explain how to port UEFI to new ARM platforms
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11994 6f19259b-4bc3-4df7-8a09-765794883524
|
|
In the former memory model, the UEFI firmware was expected to be located
at the top of the system memory. Stacks & Pi memory regions were set below
the firmware.
On some platform, the UEFI firmware could be shadowed by the ROM firmware
(case of the BeagleBoard) and in some cases the firmware is copied at the
beginning of the system memory.
With this new memory model, stack and Pi/DXE memory regions are set at the
top of the system memory wherever the UEFI firmware is located in the memory
map.
Because DXE core does not support shadowed firmwares, the system memory covered
by the UEFI firmware is marked as 'Non Present' to avoid to be overlapped by
DXE allocations.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11992 6f19259b-4bc3-4df7-8a09-765794883524
|
|
ArmPlatformSecExtraAction()
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Catch the pressed key used to not start the default boot device.
Otherwise this key would appear in the menu user input.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11990 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The SP804 timer counts down. Change GetPerformanceCounterProperties ()
to declare this property.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11989 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Other compiler version ... other warnings
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11970 6f19259b-4bc3-4df7-8a09-765794883524
|
|
documentation
To make the life easier for the user, I compiled the patches into a single patch
'BaseTools-Pending-Patches.patch'.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11966 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11964 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Set gArmPlatformTokenSpaceGuid.PcdDefaultBootArgument with the empty string
in DSC files.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11963 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The $(BUILD_TARGETS) macro was used to make the difference between DEBUG and
RELEASE builds. The $(TARGET) macro should be used instead.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11961 6f19259b-4bc3-4df7-8a09-765794883524
|
|
By removing the DMC Base Address from the structure, we can reuse the same DMC
configuration for two similar DMC controllers.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11960 6f19259b-4bc3-4df7-8a09-765794883524
|
|
into the driver itself by passing SMC configuration to the driver
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11959 6f19259b-4bc3-4df7-8a09-765794883524
|
|
of the stack
When using ArmPlatformPkg/PrePeiCore or ArmPlatformPkg/PrePi, the global variable during
the XIP phase are stored on the top of the stack.
Global variables are defined by their PCD offset from the top of this stack.
For example, the HobListPtr is defined at the offset PcdHobListPtrGlobalOffset.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11958 6f19259b-4bc3-4df7-8a09-765794883524
|
|
ArmPlatformPkg/Drivers/ (2)
... svn did not like my way to move folder from one directory to another one :-/
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11957 6f19259b-4bc3-4df7-8a09-765794883524
|
|
ArmPlatformPkg/Drivers/
The idea is to keep ArmPkg responsible for the ARM architectural modules and ArmPlatformPkg
the ARM development platform packages (with their respective drivers).
ArmPlatformPkg: Reduce driver dependency on ArmPlatform.h
- Move some driver definitions from C-Macro to PCD values
- Unify PCD driver namespace
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11956 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This module is enabled for ArmRealViewEb and ArmvExpress builds
when the macro EDK2_SKIP_PEICORE is passed to the build system.
The PrePi module can be used when the DRAM has already been initialized
by the SEC phase/1st stage boot loader and no call to external PEIM is
required.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11953 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Feature PCDs cannot be used in assembly files.
The PcdStandalone PCD is needed in one of the assembly file of the
ArmPlatformPkg/PrePi module.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11952 6f19259b-4bc3-4df7-8a09-765794883524
|
|
In the aim to reuse the Platform Pei features in a PrePi module (use to
skip the PEI Core), this module has been divided into two files:
- PlatformPeiLib: declare the platform HOBs
- PlatformPeim: PEIM wrapper for the library
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11951 6f19259b-4bc3-4df7-8a09-765794883524
|
|
In the aim to reuse the memory init features in a PrePi module (use to
skip the PEI Core), this module has been divided into two files:
- MemoryInitPeiLib: declare the memory HOBs
- MemoryIniPeim: PEIM warpper for the library
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11950 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This module should handle the Pre PI phase before the DXE core is
executed when there is no PEI Core support.
It declares the required information needed by the DXE core through HOBs.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11949 6f19259b-4bc3-4df7-8a09-765794883524
|
|
EFI_LOAD_OPTION is a packed structure. Accessing to the non aligned double word
requires to use ReadUnaligned32() function.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11916 6f19259b-4bc3-4df7-8a09-765794883524
|
|
There were some assumptions that some PCDs and protocols were defined.
Check if these requirements are defined; either print a debug message
to inform the user or skip the statements that require these PCDs or protocol.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11915 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Express CTA9x4
The default build instructions are for the Open Source Toolchain (ARMGCC) on Linux.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11838 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The errors were:
- uncaught returned error
- used of uninitialized variables
ArmPlatformPkg/Bds: Implement the update of MemMap Boot Device
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11830 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11829 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The code specific to the secure intialization has been moved into a
separate file that is not linked with the Normal world version of the
library.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11810 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Some registers were not correctly set. Some other registers do not
exist on ARM RealView EB.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11809 6f19259b-4bc3-4df7-8a09-765794883524
|
|
- Fix coding style to follow EDK2 coding convention
- Remove deprecated function
- Remove unused PCDs
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11808 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Platform designers can decide to not remap the DRAM at 0x0 on the VExpress motherboard.
This PCD can be used to set this feature.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11807 6f19259b-4bc3-4df7-8a09-765794883524
|
|
With this change, we now have these following PCDs values to define the
location of the Secure and Normal firmwares:
- gArmTokenSpaceGuid.PcdSecureFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdSecureFv(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFv(BaseAddress|Size)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11806 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Remove unused or duplicated libraries declarations
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11805 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11804 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Global Variables in XIP code
The size of this memory is controlled by a PCD. The Global Variable in this regsion are defined by their offset.
This memory region can be use to store the PEI Services Table Pointer.
Update the PeiServicesTablePointerLib to use this region instead of PcdPeiServicePtrAddr.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11803 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The Graphics Output Protocol is enable by default.
Note: ArmRealViewEb RTSM supports the LCD controller as well.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11802 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This command start alls the available drivers and prints out all the
device paths of the platform.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11801 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Specification
The UEFI Specification defines some requirement related to the Boot Manager.
This new version of the BDS support most of the features:
- TimeOut, BootNext, BootOrder, Boot### environment variable for boot device selection
- ConOut. ConIn, ConErr environment variables for console intialization
- Boot EFI application defined by a Device Path
- Support removable devices
- Support FileSystem, MemMap, PXE and TFTP boot devices
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11800 6f19259b-4bc3-4df7-8a09-765794883524
|
|
function call
The UEFI platform designer had to add '%a' to their EBL prompt PCD to print out the path
in the shell.
This change makes the addition of the path automatically after the platform specific value
in the EBL shell.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11798 6f19259b-4bc3-4df7-8a09-765794883524
|
|
initialization functions
Some ArmVExpress-based tiles do not map all the ArmVExpress Chips into their memory map.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11797 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The ARM RealViewEB tiles could have their microcontrollers mapped into the
ARM RealView EB motherboard memory map
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11796 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11795 6f19259b-4bc3-4df7-8a09-765794883524
|
|
- Create SP805 Watchdog timer
- Enable this new driver on VExpress Cortex-A9x4 Core tile
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11794 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11793 6f19259b-4bc3-4df7-8a09-765794883524
|
|
On ARM Versatile Express, the microcontroller can reset the entire platform.
The micro-controller can be accessed by the SysConfigLib.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11792 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The PcdSP804Timer0InterruptNum defines the interrupt number attached to SP804 Timer0.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11791 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11790 6f19259b-4bc3-4df7-8a09-765794883524
|