Age | Commit message (Collapse) | Author |
|
When building AARCH64 platforms that include a Shell binary built from
source, we run into trouble when using the tiny code model for DEBUG
builds. The reason is that the Shell binary built in DEBUG mode exceeds
the 1 MB range of the ADR instruction, so anything that gets pulled into
the final link of the Shell binary either needs to be built with the small
or large model, or needs to be sorted in some way to put the ADR references
close to their targets.
Since code size is not a big concern for DEBUG builds anyway, let's move
to the small code model for all modules when using DEBUG GCC49. This way,
there is no need for workarounds that are specific to UEFI_APPLICATION
modules in general, or the Shell application in particular.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
(cherry picked from commit f37d891c1b870b294964adf65f619a661700fcab)
|
|
This aligns the GCC definitions for 4.6 and up to align with the ARM and
AARCH64 definitions, which is to ignore unused but set variables only on
RELEASE builds. This allows us to find instances of unused variables that
are left behind after refactoring. It also allows us to find bad new code,
which, due to the EDK2 coding style which disallows initialized automatic
variables, may contain such variables without having been noticed by other
toolchains.
(Slightly edited) observation from Jordan Justen
<jordan.l.justen@intel.com>: RELEASE builds must keep the flag because
debug code (such as assertions) may collapse to nothing -- e.g. if a
platform defines MDEPKG_NDEBUG for RELEASE -- and therefore trigger the
warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
[lersek@redhat.com: incorporate commit message update from Jordan]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 20d00edf21d2f2144921622891d8b59a1553cd83)
|
|
Newer GCC compilers use a default of march higher than i586
for -m32 (IA32 configuration) and this is causing generation of
instructions that are not compatible with all IA32 targets.
Specically Galileo platform support in the QuarkPlatformPkg does
not boot if GCC48 or higher is used.
This is similar to the following checkin that was done to address
this same issue for VS2012 and higher tool chains:
SHA-1: 71028ba2c4c398d70475504e671d048d9003d90f
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leroy Leahy <leroy.p.leahy@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit c261c27dcee4603b9628d68639e7dccc4253af7e)
|
|
There are no functional changes in this patch.
The only change is to the XML format, updated using Visual Studio
Edit->Advanced->Format Document.
Different XML Schema editors use different formats for indentation and
line breaks. Visual Studio 2013 uses a two space indentation for content.
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Larry Hauch <larry.hauch@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
(cherry picked from commit cbf14fa0845d118a85cb691a02f3793ffce45e82)
|
|
GCC for AARCH64 recognizes byte swapping load and store sequences
and may replace them with wider loads or stores combined with rev
instructions. In some cases (i.e., with GCC version 5 and later)
this may result in unaligned accesses, which are not allowed before
we turn the MMU on.
So build any modules or static libraries that may execute with the MMU
off with -mstrict-align. Other modules don't need this switch, so we
can remove it from the CLANG35/AARCH64 common CC flags.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19638 6f19259b-4bc3-4df7-8a09-765794883524
(cherry picked from commit d764d59849b782c11424f27c2148ecb057533a76)
|
|
This introduces a special .c to .obj build rule for GCC/AARCH64 that
takes into account additional compiler flags that have been specified
via *_*_*_CC_XIPFLAGS. These will be passed after (and in addition to)
the ordinary CC_FLAGS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19637 6f19259b-4bc3-4df7-8a09-765794883524
(cherry picked from commit 3a02a87f9f4dd5ba6741e64e20e5ab67fe4f303b)
|
|
The Clang preprocessor may rely on builtin defines that are target
dependent, so we should add the -target argument also when invoking
the preprocessor directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19584 6f19259b-4bc3-4df7-8a09-765794883524
(cherry picked from commit c2a892d7c8a78143006bb7fdc95fb18f7e2fc685)
|
|
Since we are combining Clang with the GNU linker, make that explicit in
the target triplet. This affects certain builtin defines and other compiler
behavior that may be unspecified otherwise.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19583 6f19259b-4bc3-4df7-8a09-765794883524
(cherry picked from commit d4dcd5542a88eeee5a268284a4dfe026918f1720)
|
|
This extends the existing CLANG35 toolchain definition with support for
building for the ARM architecture. In order to be able to reuse the existing
ARM GCC definitions as much as possible, the following changes have been
made to the existing ARM GCC support:
- the -mapcs option has been removed; it is a no-op under Thumb (our default)
and we use AAPCS (-mabi=aapcs) anyway
- the -mword-relocations option has been moved from GCC_ARM_CC_FLAGS to
the GCC4x specific option: CLANG does not support it, and uses '-mllvm
-marm-use-movt=0' instead.
(Sync patch r19284 from main trunk.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2015@19386 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Up until SVN r18540, GenFw created invalid PE/COFF binaries for the ARM
architecture, by allowing PE/COFF .data sections to appear at offsets
that were not aligned to the global PE/COFF section alignment. The
reason for this was that the relocation metadata emitted by RVCT's
armlink only contains dynamic absolute relocations, so it is impossible
to recalculate relative relocations between .text and .data, and so the
relative offset between the two needs to be preserved.
Since r18540, we do align .data to the PE/COFF section alignment,
resulting in potentially corrupt PE/COFF binaries unless .data happens
to appear at a 32-byte aligned offset. So let's introduce a RVCT scatter
file that sets this alignment for the ELF .data section (and subsequent
.bss section).
At the same time, set the start offset to 0x220 bytes (which is the size
of our 32-bit PE/COFF header) so that the memory layouts are identical
between ELF and PE/COFF. Also add a 4 KB aligned version that can be
used to build DXE_RUNTIME_DRIVER modules with runtime memory protection
enabled.
(Sync patch r19235 from main trunk.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2015@19382 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The default behavior of the GCC compiler is to emit uninitialized globals
with external linkage into a COMMON section, where duplicate definitions
are merged. This may result in unexpected behavior, since global variables
defined under the same name in different C files may not refer to the same
logical data item.
For instance, the definitions of EFI_EVENT mVirtualAddressChangeEvent that
[used to] appear in the following files:
CryptoPkg/Library/BaseCryptLib/SysCall/RuntimeMemAllocation.c
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c
will be folded into a single instance of the variable when the latter
module includes the former library, which can lead to unexpected results.
Even if some may argue that there are legal uses for COMMON allocation, the
high modularity of EDK2 combined with the low level of awareness of the
intracicies surrounding common allocation and the generally poor EDK2
developer discipline regarding the use of the STATIC keyword* make a strong
case for disabling it by default, and re-enabling it explicitly for packages
that depend on it.
So prevent GCC from emitting variables into the COMMON section, by passing
-fno-common to the compiler, and discarding the section in the GNU ld linker
script.
* Any function or variable that is only referenced from the translation unit
that defines it could be made STATIC. This does not only prevent issues
like the above, it also allows the compiler to generate better code, e.g.,
drop out of line function definitions after inlining all invocations or
perform constant propagation on variables.
(Sync patch r19164 from main trunk.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2015@19381 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Ensure that AutoGen.h is force-included when the RVCT preprocessor
is invoked.
(Sync patch r19097 from main trunk.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2015@19370 6f19259b-4bc3-4df7-8a09-765794883524
|
|
(Sync patch r19101 from main trunk.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Yu <yu.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2015@19117 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2015@18784 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The AARCH64 tiny code model produces more efficient code, since it
uses relative symbol references rather than absolute references, i.e.,
an emitted relative reference refers to the symbol directly rather
than a literal containing its 64-bit absolute address. This saves
space in the binary, and reduces the number of relocation fixups that
need to be applied by the PE/COFF loader.
So now that we support relative relocations in GenFw, move to the
tiny code model by default. Note that the large model can still be
selected by individual modules by adding -mcmodel=large to the
appropriate CC_FLAGS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18242 6f19259b-4bc3-4df7-8a09-765794883524
|
|
VS2012 and VS2013 turn on optimizations by default that generate the
use of CMOV instruction. This is a change from previous version VS2008.
This means when you build with VS2012 or VS2013, it will generate UD
exceptions on Quark.
To resolve it, add /arch:IA32 options to not use enhanced instructions.
https://msdn.microsoft.com/en-us/library/7t5yh4fd(v=vs.140).aspx
Update the default options of VS2012 & VS2013 tool chain IA32 arch in
BaseTools\Conf\tools_def.template to make sure the generated Quark
compatibility driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18230 6f19259b-4bc3-4df7-8a09-765794883524
|
|
In GCC 4.7, a feature was added to the ARM backend that allows
unaligned loads and stores to be emitted. Since it is enabled by
default on ARMv6 and later CPUs, and since such code is not suitable
in our case (i.e., bare metal code), we must disable it by passing the
-mno-unaligned-access option if we are using GCC 4.7 or later.
However, this particular feature and its enabling by default have been
backported to version 4.6 by Linaro. Since the Linaro toolchains are
widely used for ARM development, and also shipped by distros such as
Ubuntu, we should disable the feature on version 4.6 as well.
Unfortunately, since the upstream version does not support the feature,
it also does not understand the -mno-unaligned-access option.
Since GCC sets the builtin #define __ARM_FEATURE_UNALIGNED to 1 when
-munaligned-access is in effect, we can force the build to fail in this
case by passing -D__ARM_FEATURE_UNALIGNED=0 on the GCC command line.
This will produce the following error message:
<command-line>:0:0: error: "__ARM_FEATURE_UNALIGNED" redefined [-Werror]
<built-in>:0:0: note: this is the location of the previous definition
and terminate the build.
This patch may cause some existing builds to fail, but they will be
builds that were previously at risk of unexpected runtime exceptions.
Those builds can also easily be switched to the GCC47 profile instead,
generating safe binaries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18228 6f19259b-4bc3-4df7-8a09-765794883524
|
|
After the recent GNU linker script changes, the following warning is
emitted many times during the OVMF build:
BFD: <...>: warning: Empty loadable segment detected, is this intentional ?
This is caused by the fact that, now that the section layout has changed
somewhat, the .eh_frame section is assigned an ELF segment of its own,
which ends up with no contents at all after we strip the .eh_frame
section from the output. (Note that the program headers that contain the
segment information are completely irrelevant to us since the PE/COFF
conversion does not rely on them.)
Since we only retain the .eh_frame data for external debugging, and not
for things like stack unwinding or generating backtraces at runtime, we
can remedy the situation by passing -fno-asynchronous-unwind-tables on
the GCC command line. This option instructs the compiler to emit the
unwind data into a debug section called .debug_frame instead of into
.eh_frame.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18217 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The ARMGCC and ARMLINUXGCC toolchains are specific to the ARM and
AARCH64 architectures, and overlap with the toolchain configuration
that is provided by the GCC44 - GCC49 toolchains, which are defined
for all architectures.
To reduce the maintenance burden, and make it easier to keep these
different architectures aligned, remove the ARMGCC and ARMLINUXGCC
toolchains entirely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18212 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This adds support for building the AARCH64 platforms using the
Clang compiler and assembler combined with the GNU (cross-)linker.
The chosen name CLANG35 is based on version 3.5 being the oldest
supported version, but no issues are known that should prevent its
use with any later version.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18198 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The long value substitution must move to the front of
HEX substitution, and updated build_rule to add --trim-long
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18170 6f19259b-4bc3-4df7-8a09-765794883524
|
|
These scripts all now have the same contents, so we only need to use
GccBase.lds. Therefore we can delete gcc-4K-align-ld-script,
gcc4.4-ld-script and gcc4.9-ld-script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18142 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Drop the GCC AARCH64 specific linker script and use the new
unified one instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18138 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Instead of hardcoding the values for the PE/COFF header size and the
section alignment, set them on the linker command line. This factors
out these values from the various linker scripts, which will allow us
to unify them in a subsequent patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18134 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Some toolchains, at least Fedora GCC, generate inline unwind tables in
object files. These confuses GenFw to no end, leading to build failures:
GenFw: ERROR 3000: Invalid WriteSections64(): ...
unsupported ELF EM_AARCH64 relocation 0x105.
GenFw: ERROR 3000: Invalid WriteSections64(): ...
unsupported ELF EM_AARCH64 relocation 0x0.
I am aware of no current use of these tables, so explicitly disable
their generation for aarch64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17905 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Instead of relying on the builtin linker script of GNU ld, which
may vary based on binutils version (which is not tightly coupled to
the GCC version) and linker command line options, introduce a linker
script for AArch64 to be used by all GCC/binutils versions.
The script is laid out such that two ELF sections .text and .data are
created that map onto the PE/COFF with the same names. By aligning
.data to the minimum alignment of .text, and by not adding any
additional padding -which is what LD's builtin linker script does- the
relative offset between .text and .data is retained after the PE/COFF
conversion. This should prevent problems with debuggers and other
tooling that are ELF based.
Also provided is an overlay linker script that increases the alignment
of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER
modules, to make them compatible with the newly introduced
Properties Table feature.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17824 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Revert r17802 "BaseTools: AArch64: use explicit linker scripts"
Revert r17803 "ArmVirtPkg: build runtime drivers with 64 KB section alignment"
Revert r17804 "IntelFrameworkModulePkg: AcpiS3SaveDxe: prepare for End-of-Dxe callback"
Revert r17805 "IntelFrameworkModulePkg: AcpiS3SaveDxe: call S3Ready() at End-of-Dxe"
Revert r17806 "OvmfPkg: AcpiS3SaveDxe: prepare for End-of-Dxe callback"
Requested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17807 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Instead of relying on the builtin linker script of GNU ld, which
may vary based on binutils version (which is not tightly coupled to
the GCC version) and linker command line options, introduce a linker
script for AArch64 to be used by all GCC/binutils versions.
The script is laid out such that two ELF sections .text and .data are
created that map onto the PE/COFF with the same names. By aligning
.data to the minimum alignment of .text, and by not adding any
additional padding -which is what LD's builtin linker script does- the
relative offset between .text and .data is retained after the PE/COFF
conversion. This should prevent problems with debuggers and other
tooling that are ELF based.
Also provided is an overlay linker script that increases the alignment
of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER
modules, to make them compatible with the newly introduced
Properties Table feature.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17802 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Replace '/MERGE:.data=.text /MERGE:.rdata=.text' with /MERGE:.rdata=.data
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17726 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The version of IASL compiler in the tools_def.template file no longer exists on the acpica.org site.
Update download link and remove the specific version info from the tools_def.template file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17725 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This patch makes sure the EFI file in $(BIN_DIR) is unique. If there are modules with same BaseName, the FILE_GUID is appended.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17608 6f19259b-4bc3-4df7-8a09-765794883524
|
|
*.nasmb is place of *.asm16. To keep the same output file, copy the output
file with .com postfix.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17580 6f19259b-4bc3-4df7-8a09-765794883524
|
|
For *.asm and *.s, there have been cases of *.Asm and *.S files, but
since the nasm extensions are new, we don't need to support the upper
case extensions.
In other words, remove .Nasm and .NASM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17544 6f19259b-4bc3-4df7-8a09-765794883524
|
|
*_*_*_*_BUILDRULEORDER = nasm Nasm NASM asm Asm ASM S s
*_XCODE32_*_*_BUILDRULEORDER = S s nasm Nasm NASM
*_XCLANG_*_*_BUILDRULEORDER = S s nasm Nasm NASM
*_XCODE5_*_*_BUILDRULEORDER = S s nasm Nasm NASM
Tool Chain in Mac Os will use S as the first priority. Other tool chains
use nasm as the first priority.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17510 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Root cause: The CryptoPkg\Library\IntrinsicLib needs override MSFT build option to remove /Oi and /GL,
but it doesn’t work because of the build option override in Nt32Pkg.dsc.
Solution: Remove /X in BaseTools/Conf/tools_def.template
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17069 6f19259b-4bc3-4df7-8a09-765794883524
|
|
NASM tool version should be 2.07 instead of 2.0.7.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16596 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Gcc option -mno-unaligned-access is supported by gcc 4.7 and newer, so it shouldn't be used with gcc 4.6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16464 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Revision 16400 adds support for Windows hosted gcc versions 4.8 and 4.9.
With this change, all of the GCCXX tool chains can be used from Windows.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16418 6f19259b-4bc3-4df7-8a09-765794883524
|
|
from Windows.
Here is a new patch that adds Windows support for both gcc 4.8.x and gcc 4.9.x.
This time testing is more thorough: boot testing using Duet for all 4 combinations of
IA32/X64 and gcc 4.8.2 and gcc 4.9.1 passes. A Windows hosted gcc 4.8.2 has been added here:
http://sourceforge.net/projects/edk2developertoolsforwindows/
The environment variable settings for Windows look like:
set UEFI_BUILD_TOOLS=%cd%\tools
set NASM_PREFIX=%UEFI_BUILD_TOOLS%\nasm211\
set GCC48_BIN=%UEFI_BUILD_TOOLS%\gcc482-x86\bin\
set GCC48_DLL=%UEFI_BUILD_TOOLS%\gcc482-x86\dll\;%GCC48_BIN%
set GCC48_ARM_PREFIX=%UEFI_BUILD_TOOLS%\gcc482-arm\bin\
set GCC48_AARCH64_PREFIX=%UEFI_BUILD_TOOLS%\gcc482-aarch64\bin\
set GCC49_BIN=%UEFI_BUILD_TOOLS%\gcc491-x86\bin\
set GCC49_DLL=%UEFI_BUILD_TOOLS%\gcc491-x86\dll\;%GCC49_BIN%
set GCC49_ARM_PREFIX=%UEFI_BUILD_TOOLS%\gcc491-arm\bin\
set GCC49_AARCH64_PREFIX=%UEFI_BUILD_TOOLS%\gcc491-aarch64\bin\
No change is needed for building from Linux.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16400 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16399 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16172 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The default object type for NASM is raw binary, and this will not link.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16085 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16018 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16017 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Note: Only tested with the GCC49 toolchain so far.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16016 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Update C-Code-File rule since XCODE never needs the SYMRENAME step.
Add *.S16 to Mash16-Code-File rule to supoprt 16-bit assmebly with XCODE
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anderw Fish <afish@apple.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15980 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Xcode 5 changed the arguments required to supoprt X64 EFIAPI so it is a new
target. XCODE5 supports Xcode 5.* and Xcode 6.*, and will probably support
future versions of Xcode as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anderw Fish <afish@apple.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15979 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15971 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The XCODE32 target is used to build the x86_64 Mac OS X application for the
emulator. The other Xcode targets build the EFIAPI needed for UEFI. This patch
removes an obsolete command line argument.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15930 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15854 6f19259b-4bc3-4df7-8a09-765794883524
|