Age | Commit message (Collapse) | Author |
|
transfer length in a single SCSI/ATAPI transfer to reach best device compatibility.
Besides this, the patch also fixed:
1) Wrong return value in SenseDataLength field of packet field of EFI_EXT_SCSI_PASS_THRU protocol, it should reflect real sense data length we got.
2) Wrong logic in ScsiDiskRequestSenseKeys that the logic makes SenseData pointer unaligned compared with BlockIo.Media.IoAlign field.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian, Feng <feng.tian@intel.com>
Reviewed-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Fu, Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15491 6f19259b-4bc3-4df7-8a09-765794883524
|
|
CHECK_CONDITION, then parse sense data to decide which actions need to be done.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian, Feng <feng.tian@intel.com>
Reviewed-by: Fu, Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15215 6f19259b-4bc3-4df7-8a09-765794883524
|
|
experience value to cover more devices
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14521 6f19259b-4bc3-4df7-8a09-765794883524
|
|
for the finish of a read/write operation according to the actual transfer length
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14028 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: Li Elvin <elvin.li@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
Reviewed-by: Tian Feng <feng.tian@intel.com>
Reviewed-by: Fan Jeff <jeff.fan@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13890 6f19259b-4bc3-4df7-8a09-765794883524
|
|
driver (ScsiDisk) should immediately return EFI_MEDIA_CHANGE but not EFI_SUCCESS. This way is used to avoid the interrupted Partition.Start() closes those opened protocols(DiskIo and DevicePath protocol) who are using by the re-entered partition driver at the same handle.
Signed-off-by: erictian
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13082 6f19259b-4bc3-4df7-8a09-765794883524
|
|
protocol.
Signed-off-by: lzeng14
Reviewed-by: erictian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12788 6f19259b-4bc3-4df7-8a09-765794883524
|
|
1. Boost IDE mode boot when slave device is absent.
2. Use D2H FIS to check if the PIO OUT/DMA IN/DMA OUT transfer is finished or error happened. ATA PIO IN has special check as it may just receive PIO SETUP FIS for success case.
3. Add command status register check for IDE DMA transfer.
4. ScsiDiskReadCapacity() in ScsiDisk should return EFI_SUCCESS if SENSE Data request is success.
Signed-off-by: erictian
Reviewed-by: rsun3
Reviewed-by: xdu2
Reviewed-by: mdkinney
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12658 6f19259b-4bc3-4df7-8a09-765794883524
|
|
0. Remove the unused private GUID from module source files.
1. Use gEfiCallerIdGuid replace of the private module GUID.
2. Add the public header files to define HII FormSet and PackageList GUID used in every HII driver.
3. Move two EBC protocols for debug purpose from EBC driver to MdeModulePkg Include directory.
Signed-off-by: lgao4
Reviewed-by: ydong10 gdong1 tye jfan12 wli12 rsun3 jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12373 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: erictian
Reviewed-by: hhuan13
Reviewed-by: mdkinney
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12289 6f19259b-4bc3-4df7-8a09-765794883524
|
|
valid/invalid.
Signed-off-by: niruiyu
Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11987 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: erictian
Reviewed-by: ydong10
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11859 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Ahci enumeration logic tuning for boot performance.
Signed-off-by:erictian
Reviewed-by:qianouyang, hhuan13
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11820 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: niruiyu
Reviewed-by: erictian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11692 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Buffer/BufferSize/Lba is invalid so that caller can probe the media status easier.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11584 6f19259b-4bc3-4df7-8a09-765794883524
|
|
it's because BlockIo.Reset() only has two possible values: EFI_SUCCESS and EFI_DEVICE_ERROR according to UEFI2.3 spec
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10956 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10877 6f19259b-4bc3-4df7-8a09-765794883524
|
|
16 byte command instead.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10817 6f19259b-4bc3-4df7-8a09-765794883524
|
|
correct ANSI version.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10773 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10566 6f19259b-4bc3-4df7-8a09-765794883524
|
|
disk especially for above 2TB.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10550 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10420 6f19259b-4bc3-4df7-8a09-765794883524
|
|
2. Remove unnecessary .common] postfix on section.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10052 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9977 6f19259b-4bc3-4df7-8a09-765794883524
|
|
bus driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9904 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9793 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9774 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9707 6f19259b-4bc3-4df7-8a09-765794883524
|
|
validation.
2. Change ScsiTargetId from allocation to local variable.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9706 6f19259b-4bc3-4df7-8a09-765794883524
|
|
handle:
SCSI Interface GUID: Physical SCSI disk
IDE Interface GUID: ATAPI device run in legacy IDE mode
AHCI Interface GUID: ATAPI device run in AHCI mode.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9584 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Start() functions. The main changes are:
a. Add check validation of RemainingDevicePath in Supported()
b. In Star() function, if RemaingDevicePath is the End of Device Path Node, don't create child device and return EFI_SUCCESS.
2. fixed one device path issue in ScsiBus driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9264 6f19259b-4bc3-4df7-8a09-765794883524
|
|
handles on each call to Start() not to create new child handle if RemainingDeviepath is the End of Device Path Node, per UEFI 2.3.
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8677 6f19259b-4bc3-4df7-8a09-765794883524
|
|
errors.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8667 6f19259b-4bc3-4df7-8a09-765794883524
|
|
discovered. Per SCSI spec, the standard INQUIRY data shall contain at least 36 bytes and the length of the data is variable. The definition
///
/// Standard INQUIRY data format
///
typedef struct {
UINT8 Peripheral_Type : 5;
UINT8 Peripheral_Qualifier : 3;
UINT8 DeviceType_Modifier : 7;
UINT8 Rmb : 1;
UINT8 Version;
UINT8 Response_Data_Format;
UINT8 Addnl_Length;
UINT8 Reserved_5_95[95 - 5 + 1];
} EFI_SCSI_INQUIRY_DATA;
is longer than 36 bytes and EFI_BAD_BUFFER_SIZE may be returned if the actual inquiry data is less than that of EFI_SCSI_INQUIRY_DATA.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8329 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8212 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8000 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Our UEFI Driver supports both SCSI Passthru (SPT) and Ext SCSI Passthru (That is our driver installs both SCSI Passthru and Ext SCSI Passthru). When we unload our driver SCSI Bus driver closes only ESPT and keeps SPT open. Due to this when I load my driver second time the SPT installation will fail and now attempting to unload will either crash the system or hang the system.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7906 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7561 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7454 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7415 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7201 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7152 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7074 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7073 6f19259b-4bc3-4df7-8a09-765794883524
|
|
library.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7072 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7067 6f19259b-4bc3-4df7-8a09-765794883524
|
|
more efficient and rational.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7065 6f19259b-4bc3-4df7-8a09-765794883524
|
|
EFI_SIGNATURE_16 -> SIGNATURE_16
EFI_SIGNATURE_32 -> SIGNATURE_32
EFI_SIGNATURE_64 -> SIGNATURE_64
EFI_FIELD_OFFSET -> OFFSET_OF
EFI_MAX_BIT -> MAX_BIT
EFI_MAX_ADDRESS -> MAX_ADDRESS
These macros are not defined in UEFI spec. It makes more sense to use the equivalent macros in Base.h to avoid alias.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7056 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6973 6f19259b-4bc3-4df7-8a09-765794883524
|