summaryrefslogtreecommitdiff
path: root/MdeModulePkg/Bus/Usb/UsbBusDxe
AgeCommit message (Collapse)Author
2017-04-27MdeModulePkg: Move to new locationGuo Mang
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Guo Mang <mang.guo@intel.com>
2016-10-27MdeModulePkg/UsbBusDxe: rebase to ARRAY_SIZE()Laszlo Ersek
Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Feng Tian <feng.tian@Intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-25MdeModulePkg/UsbBus: reduce the port status polling before port resetFeng Tian
This change is used to remove the port status polling in port reset functions. Why it's needed is because: 1) The same polling on same port has taken place prior to this removed one. See UsbEnumeratePort()->GetPortStatus(). So this polling in UsbEnumerateNewDev()->ResetPort() is redundant. 2) EDKII Xhci driver hooks all GetPortStatus() operations. If we don't remove this one, XHCI driver's XhcPollPortStatusChange() may enter twice in reset process and wrongly think the device is unplugged. Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2016-07-25MdeModulePkg/UsbBus: remove redundant host controller reset in UsbBusFeng Tian
The Host Controller reset has been done at EDKII UHCI/EHCI/XHCI, The original code will do twice host controller initialization which is unnecessary. It also bring issues on some USB HCs. Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2016-06-29MdeModulePkg/UsbBusDxe: Fixed USB descriptor length checkEvgeny Yakovlev
According to spec if the length of a descriptor is smaller than what the specification defines, then the host shall ignore it. However if the size is greater than expected the host will ignore the extra bytes and start looking for the next descriptor at the end of actual length returned. Original check did not handle the latter case correctly and only allowed descriptors with lengths exactly as defined in specification. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Evgeny Yakovlev <insoreiges@gmail.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2016-04-21MdeModulePkg/Usb: Fix wrong condition judgment to support usb3.1 devFeng Tian
The bcdUSB value of usb3.1 is 0x0310, we update the condition judgment to get correct max packet size for usb3.1 dev. Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2016-02-24MdeModulePkg/UsbBusDxe: Fix memory leakAlcantara, Paulo
Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com> Reviewed-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2015-12-15MdeModulePkg: Convert all .uni files to utf-8Jordan Justen
To convert these files I ran: $ python3 BaseTools/Scripts/ConvertUni.py MdeModulePkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19257 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23MdeModulePkg: list ARM and AARCH64 as valid architectures for some modulesLaszlo Ersek
"ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc" references these drivers: - Pci/PciBusDxe - Pci/EhciDxe - Pci/UhciDxe - Usb/UsbBusDxe - Usb/UsbKbDxe Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16916 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18MdeModulePkg/UsbBusDxe: Update Device->NumOfInterface at error handling path ↵Feng Tian
to avoid system hang when DisconnectController is invoked to free resource occupied by usb device whose interface descriptor format doesn't follow usb spec. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16128 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-10MdeModulePkg/UsbBusDxe: Fixed Clang build error.Nikolai Saoukh
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Nikolai Saoukh <nms@otdel-1.org> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16084 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-03MdeModulePkg: Convert non DOS format files to DOS format and remove unused ↵Gao, Liming
module UNI files. 1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format. 2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gao, Liming <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28MdeModulePkg: INF/DEC file updates to EDK II packagesZeng, Star
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module. a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion. c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion. 3. Add Module Extra UNI file that provides the localized Name of a module. a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file. b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation. c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zeng, Star <star.zeng@intel.com> Reviewed-by: Gao, Liming <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28MdeModulePkg: INF/DEC file updates to EDK II packagesZeng, Star
1. Usage information in INF file comment blocks are either incomplete or incorrect. This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes. The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zeng, Star <star.zeng@intel.com> Reviewed-by: Gao, Liming <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-27MdeModulePkg/UsbBusDxe: Fix a bug about the alternate setting number which ↵Feng Tian
should be up to 256. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Elvin Li <elvin.li@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15915 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-03MdeModulePkg/Usb: All h/w related stop operation at DriverBindingStop() ↵Feng Tian
should be behind s/w related stop operation, which could avoid h/w not working if s/w stop operation fails. Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Elvin Li <elvin.li@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14927 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-22MdeModulePkg/UsbBus&XhciDxe: Solve a bug that 2 or more tiers SS hubs with ↵Feng Tian
SS devices may have no response. 1.Port reset process may not be proper for some vendor's SS hubs. If the corresponding port shows the reset has been done by C_RESET bit we have to skip the whole reset process for attached devices. 2.Clean C_BH_RESET bit immediately to avoid usb timer entering too many times when 5 tiers hubs are connected. 3.Stop checking URB if there is an error happened. 4.Better error handling for fast hot-plug. Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Elvin Li <elvin.li@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14889 6f19259b-4bc3-4df7-8a09-765794883524
2013-11-19MdeModulePkg/UsbBus: Stop parsing descriptor if some of descriptor fields ↵Feng Tian
are invalid. Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14863 6f19259b-4bc3-4df7-8a09-765794883524
2013-10-30MdeMdeModulePkg/UsbBusDxe: If DisconnectController() returns an error the ↵Feng Tian
USB Bus Driver would retry the DisconnectController() from a timer event until it succeeds Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14819 6f19259b-4bc3-4df7-8a09-765794883524
2013-10-08Fix several DEBUG_ERROR messages that are unnecessarily verbose. Several of ↵Samer El-Haj-Mahmoud
these are marked as DEBUG_ERROR when they are really not errors. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com> reviewed-by: Zeng, Star <star.zeng@intel.com> reviewed-by: Tian, Feng <feng.tian@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14751 6f19259b-4bc3-4df7-8a09-765794883524
2013-05-10MdeMdeModulePkg/UsbBusDxe: Break device enumeration process if the device ↵erictian
descriptor includes 0 configuration. Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Mike Wu <mike.wu@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14338 6f19259b-4bc3-4df7-8a09-765794883524
2013-04-07MdeMdeModulePkg/UsbBusDxe: Fixed a possible memory leak bug introduced at r14226erictian
The r14226 check-in indeed has memory leak in allocated "Child" pointer. UsbBusDriverBindingStop() may dereference this pointer and may bring exception on invalid memory access Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14251 6f19259b-4bc3-4df7-8a09-765794883524
2013-03-29MdeMdeModulePkg/Usb: two tunings for better device identification behind huberictian
1.enlarge the recovery time from 10ms to 20ms after port reset to make set address request success for better device compatibility. 2.another enhancement is to use RESET_C bit rather than RESET bit to judge if hub reset port operation is done. Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Elvin Li <elvin.li@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14227 6f19259b-4bc3-4df7-8a09-765794883524
2013-03-29MdeMdeModulePkg/Usb: Fixed two usb issueserictian
1.Fix the bug in interface parser logic for usb camera device. Reserve device address if the device doesn’t get disconnected. 2.Some usb 1.1 devices require the context evaluation immediately with actual max packet size after detecting the device max packet size. Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Elvin Li <elvin.li@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14226 6f19259b-4bc3-4df7-8a09-765794883524
2013-02-21Refine the code to avoid error report.ydong10
Signed-off-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14143 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-30Add missing status code in several modules.li-elvin
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Yao Jiewen <jiewen.yao@intel.com> Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com> Reviewed-by: Gao Liming <liming.gao@intel.com> Reviewed-by: Tian Feng <feng.tian@intel.com> Reviewed-by: Fan Jeff <jeff.fan@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13890 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-10MdeModulePkg/UsbBusDxe: Timing tunning for better boot performance.erictian
Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13809 6f19259b-4bc3-4df7-8a09-765794883524
2012-04-28MdeModulePkg: Enlarge timeout value to wait set_address request success for ↵erictian
large capacity usb hard disk Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Li Elvin <elvin.li@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13227 6f19259b-4bc3-4df7-8a09-765794883524
2012-03-30MdeModulePkg/UsbBusDxe:Correct typos in usb debug messageerictian
Signed-off-by: erictian Reviewed-by: rsun3 git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13155 6f19259b-4bc3-4df7-8a09-765794883524
2012-03-27MdeModulePkg/XhciDxe: Event Ring traverse algorithm enhancement to avoid ↵erictian
that those completed async transfer events don't get handled in time and are flushed by newer coming events. Signed-off-by: erictian Reviewed-by: li-elvin git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13145 6f19259b-4bc3-4df7-8a09-765794883524
2012-03-07MdeModulePkg: add support for ORICO PEUS3-2P carderictian
1) Fix a bug on missing hub context evaluation operation. 2) If the usb keyboard device configuration has been set successfully, then don’t set configuration again. Signed-off-by: erictian Reviewed-by: li-elvin git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13087 6f19259b-4bc3-4df7-8a09-765794883524
2011-11-25MdeModulePkg: The patch eliminates two assumptionserictian
1) XHCI host controller hw always provides more than 5 interrupters. Now using interrupter 0 to accommodate all received events. 2) XHCI host controller hw always provides 32bytes context size. Now it dynamically detect context size and construct it. also solved several issues: 1) Divides 64byte width register access to two 32bit registers access because some XHCI chipsets cannot support a single 64bit access. 2) Remove halt host controller statement in UsbBusDriverBindingStop(). It has been done by host controller’s DriverBindingStop(). And XhciDriverBindingStop() need XHCI host controller is in running state because it need execute DISABLE_SLOT cmd to release h/w resource. signed-off-by: erictian Reviewed-by: li-elvin git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12785 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-21Coding style refinement.erictian
Signed-off-by: erictian Reviewed-by: ydong10 git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12396 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-18Clean up the private GUID definition in module Level.lgao4
0. Remove the unused private GUID from module source files. 1. Use gEfiCallerIdGuid replace of the private module GUID. 2. Add the public header files to define HII FormSet and PackageList GUID used in every HII driver. 3. Move two EBC protocols for debug purpose from EBC driver to MdeModulePkg Include directory. Signed-off-by: lgao4 Reviewed-by: ydong10 gdong1 tye jfan12 wli12 rsun3 jyao1 git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12373 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-141) remove wrong global variable usage because it will bring data corrupt if ↵erictian
there are multiple XHCI host controllers. 2) coding style clean up. Signed-off-by: erictian Reviewed-by: ydong10 Reviewed-by: jshi19 git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12351 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-13MdeModulePkg/UsbBusDxe: Removed unused variableoliviermartin
'SnString' is set but not used. Reviewed-by: lgao4 git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12340 6f19259b-4bc3-4df7-8a09-765794883524
2011-08-25Fixed build error reported by ICC and GCCerictian
Signed-off-by: erictian Reviewed-by: li-elvin git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12209 6f19259b-4bc3-4df7-8a09-765794883524
2011-08-25Error handling refinement at UsbIoResetPort() to avoid device state machine ↵erictian
getting corrupted when the device disconnect happens Signed-off-by: erictian Reviewed-by: niruiyu git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12204 6f19259b-4bc3-4df7-8a09-765794883524
2011-08-23Enabling usb3.0 XHCI support.erictian
Signed-off-by: erictian Reviewed-by: jshi19 git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12185 6f19259b-4bc3-4df7-8a09-765794883524
2011-07-06Fix the comments to follow UEFI Spec regarding how to check an EFI_HANDLE is ↵niruiyu
valid/invalid. Signed-off-by: niruiyu Reviewed-by: lgao4 git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11987 6f19259b-4bc3-4df7-8a09-765794883524
2011-06-04Fix X64 clang warnings.andrewfish
Reviewed by: Rui Sun Approved by: Rui Sun git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11753 6f19259b-4bc3-4df7-8a09-765794883524
2011-05-26Add more status code in drivers.li-elvin
Signed-off-by: li-elvin Reviewed-by: jyao1 Reviewed-by: lgao4 Reviewed-by: erictian git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11706 6f19259b-4bc3-4df7-8a09-765794883524
2010-12-241. update MatchUsbWwid() to check Vendor Id, Product Id and Interface Number. xdu2
2. update SerialNumber comparing logic to handle possible NULL-terminator in WWID device path 3. fix bug in UsbIo->UsbIoGetSupportedLanguages(): TableSize is size in bytes of LangIDTable instead of number of LangID. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11197 6f19259b-4bc3-4df7-8a09-765794883524
2010-09-16Refine code to make code run safely.ydong10
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10880 6f19259b-4bc3-4df7-8a09-765794883524
2010-04-24Update the copyright notice formathhtian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10420 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-241. Correct File header to ## @filelgao4
2. Remove unnecessary .common] postfix on section. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10052 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-19Improve coding style in MdeModulePkg.rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9793 6f19259b-4bc3-4df7-8a09-765794883524
2009-12-16add error handling on usb related modules.eric_tian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9566 6f19259b-4bc3-4df7-8a09-765794883524
2009-10-05MdeModulePkg-UsbBusDxe: Add work around for slower USB hubs/devicesjljusten
Increase the value of USB_GENERAL_DEVICE_REQUEST_TIMEOUT from 50 milliseconds to 100 milliseconds. This provides a work around for slower USB hubs and devices. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9330 6f19259b-4bc3-4df7-8a09-765794883524
2009-09-14updated the Bus Driver that is able to create all or one of its child ↵vanjeff
handles on each call to Start() not to create new child handle if RemainingDeviepath is the End of Device Path Node, per UEFI 2.3. The others changes include: 1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called. 2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle. 3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-15 13:10:08 +0000