summaryrefslogtreecommitdiff
path: root/MdeModulePkg
AgeCommit message (Collapse)Author
2017-02-21MdeModulePkg/BMMUiLib: Remove old useless data before new save actionDandan Bi
There exits the case that when saving changes in form A, the old saved data in form B are not cleaned, will be saved again with the new save. Thus incorrect UI behavior will be shown. This patch is to remove some useless data. https://bugzilla.tianocore.org/show_bug.cgi?id=385 Cc: Eric Dong <eric.dong@intel.com> Cc: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
2017-02-21MdeModulePkg/HiiDatabase: clean the value before setting default stringDandan Bi
For string op-code, the default string may not reach the maximum size, so when generating <AltResp> string, we should clean the value before setting the default string. https://bugzilla.tianocore.org/show_bug.cgi?id=375 Cc: Eric Dong <eric.dong@intel.com> Cc: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
2017-02-21MdeMoudlePkg/DisplayEngine: Fix incorrect index used in array "InputText"Dandan Bi
When set value to the array "InputText", the index was used incorrectly. And the array "InputText" is not initialized. These will cause some value in the array is random, so it will be shown incorrectly sometimes. This patch is to fix this issue. https://bugzilla.tianocore.org/show_bug.cgi?id=358 Cc: Eric Dong <eric.dong@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Wang Cloud <winggundum82@163.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
2017-02-21MdeModulePkg/PrintLib: Add safe print functions [A|U]ValueToStringSHao Wu
Add the following 2 APIs: UnicodeValueToStringS AsciiValueToStringS These safe version APIs are used to enhance their counterpart (APIs without trailing 'S' in function names). They perform checks to the input parameters and will return relative status to reflect the check result. Return RETURN_INVALID_PARAMETER when: 1). The input Buffer is NULL. 2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than PcdMaximumAsciiStringLength for AsciiValueToStringS. 3). The input Flags is not set properly. 4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS. Return RETURN_BUFFER_TOO_SMALL when: 1). The input BufferSize cannot hold the converted value. These APIs in the MdeModulePkg/DxePrintLibPrint2Protocol instance follow the same rules with MdePkg/BasePrintLib. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-02-21MdeModulePkg/PrintLib: Use EFI_PRINT2S_PROTOCOL for this instanceHao Wu
The commit updates the PrintLib instance MdeModulePkg/Library/DxePrintLibPrint2Protocol to use EFI_PRINT2S_PROTOCOL to implement the APIs. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-02-21MdeModulePkg: Add the EFI_PRINT2S_PROTOCOLHao Wu
Add the EFI_PRINT2S_PROTOCOL as a safe version of the EFI_PRINT2_PROTOCOL, the EFI_PRINT2S_PROTOCOL replaces the following 2 services in EFI_PRINT2_PROTOCOL: UNICODE_VALUE_TO_STRING ASCII_VALUE_TO_STRING with: UNICODE_VALUE_TO_STRING_S ASCII_VALUE_TO_STRING_S The 2 new services perform checks to the input parameters and will return relative status to reflect the check result. Return RETURN_INVALID_PARAMETER when: 1). The input Buffer is NULL. 2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than PcdMaximumAsciiStringLength for AsciiValueToStringS. 3). The input Flags is not set properly. 4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS. Return RETURN_BUFFER_TOO_SMALL when: 1). The input BufferSize cannot hold the converted value. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-02-21MdeModulePkg: Refine the services comments in EFI_PRINT2_PROTOCOLHao Wu
For the following 8 services in EFI_PRINT2_PROTOCOL: UNICODE_BS_PRINT UNICODE_S_PRINT UNICODE_BS_PRINT_ASCII_FORMAT UNICODE_S_PRINT_ASCII_FORMAT ASCII_BS_PRINT ASCII_S_PRINT ASCII_BS_PRINT_UNICODE_FORMAT ASCII_S_PRINT_UNICODE_FORMAT They will ASSERT when: 1) The input parameter 'StartOfBuffer' is NULL if 'BufferSize' indicates at least 1 Ascii/Unicode character can be held. 2) The input parameter 'FormatString' is NULL if 'BufferSize' indicates at least 1 Ascii/Unicode character can be held. 3) The input parameter 'FormatString' contains more than PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters. 4) The produced string contains more than PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters. This commits removes the ASSERT case 4) and add the following new ASSERT case: 4) The input parameter 'BufferSize' is greater than (PcdMaximumAsciiStringLength * sizeof (CHAR8)) for Ascii format string or (PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for Unicode format string. And for those ASSERT cases, 0 will be returned by those services. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-02-21MdeModulePkg/PrintLib: Refine the SPrint functionsHao Wu
For the following 12 APIs in MdeModulePkg/DxePrintLibPrint2Protocol: UnicodeVSPrint UnicodeBSPrint UnicodeSPrint UnicodeVSPrintAsciiFormat UnicodeBSPrintAsciiFormat UnicodeSPrintAsciiFormat AsciiVSPrint AsciiBSPrint AsciiSPrint AsciiVSPrintUnicodeFormat AsciiBSPrintUnicodeFormat AsciiSPrintUnicodeFormat They will ASSERT when: 1) The input parameter 'StartOfBuffer' is NULL if 'BufferSize' indicates at least 1 Ascii/Unicode character can be held. 2) The input parameter 'FormatString' is NULL if 'BufferSize' indicates at least 1 Ascii/Unicode character can be held. 3) The input parameter 'FormatString' contains more than PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters. 4) The produced string contains more than PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters. This commits removes the ASSERT case 4) and add the following new ASSERT case: 4) The input parameter 'BufferSize' is greater than (PcdMaximumAsciiStringLength * sizeof (CHAR8)) for Ascii format string or (PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for Unicode format string. And for those ASSERT cases, 0 will be returned by those 12 APIs. For the following 2 APIs in MdeModulePkg/DxePrintLibPrint2Protocol: SPrintLength SPrintLengthAsciiFormat They will ASSERT when: 1) The input parameter 'FormatString' is NULL. 2) The input parameter 'FormatString' contains more than PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters. And for those ASSERT cases, 0 will be returned by those 2 APIs. Now these APIs in the MdeModulePkg/DxePrintLibPrint2Protocol instance follow the same rules with MdePkg/BasePrintLib. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-02-21MdeModulePkg/PciBusDxe: Refine code to make it more readableRuiyu Ni
The patch doesn't impact functionality. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
2017-02-21MdeModulePkg/SdMmc: Avoid assigning 0 to the BlockSize of TrbHao Wu
Refine code to avoid potential divide by zero when calculating block number. Cc: Feng Tian <feng.tian@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-02-20MdeModulePkg:Generate the correct operational state of the interface.Zhang Lubo
Currently, When there are more than 9 Ethernet ports available, 'ifconfig -l' is not listing all the ports, only show the ports 0 to 9. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Santhapur Naveen <naveens@amiindia.co.in> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2017-02-17MdeModulePkg/PciBusDxe: Fix IA32 build failureRuiyu Ni
Compiler calculates the PciBar[BarIndex] using sizeof (PciBar[0]) * BarIndex, when BarIndex is type of UINT64, the above calculation generates assembly code using _allmul. Change BarIndex to UINTN to avoid the build failure. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2017-02-16MdeModulePkg UefiBootManagerLib: Correct usages of GUID and ProtocolLiming Gao
https://bugzilla.tianocore.org/show_bug.cgi?id=316 Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-02-10MdeModulePkg/IncompatiblePci: Use MAX_UINTN to match any IDsRuiyu Ni
When the VendorId/DeviceId/RevisionId/SubsystemVendorId /SubsystemDeviceId is MAX_UINTN, IncompatiblePciDeviceSupport driver doesn't use it to match any IDs. The patch fixes this bug. Since PciBus driver always calls IncompatiblePciDeviceSupport using IDs read from HW, MAX_UINTN is never passed to this driver. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-02-10MdeModulePkg/IncompatiblePciDevice: Do not use deprecated macrosRuiyu Ni
The patch replaces the following macros: DEVICE_ID_NOCARE (0xFF) --> MAX_UINT64 PCI_ACPI_UNUSED (0) --> 0 PCI_BAR_ALL (0xFF) --> MAX_UINT64 PCI_BAR_NOCHANGE (0) --> 0 PCI_BAR_EVEN_ALIGN --> EVEN_ALIGN (local definition) Since the PciBus driver was updated to accept Spec defined values in previous commit, the above replacements don't impact functionality. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-02-10MdeModulePkg/PciBus: Accept Spec values as BarIndex and AlignmentRuiyu Ni
PI spec IncompatiblePciSupport part defines (UINT64)-1 as all BARs and 0 to use existing alignment. PciBus driver didn't accept these values. It treated 0xFF as all BARs and 0xFFFFFFFFFFFFFFFFULL to use existing alignment. The patch changes the code to still accept old values while also accept values defined in PI spec. So that the driver can provide backward compatibility and follow spec. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-02-10MdeModulePkg/PciSioSerialDxe: Use MAX_UINT8 instead of PCI_BAR_ALLRuiyu Ni
When BarIndex equals to 0xFF, default value 0 is used as the BAR index. Though PCI_BAR_ALL and MAX_UINT8 shares the same value, using PCI_BAR_ALL is like to match any BAR not BAR 0, it's more proper to use MAX_UINT8 here. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-02-10MdeModulePkg PiSmmIpl: Update SmmCommunication comments to match code logicLiming Gao
Cc: Star Zeng <star.zeng@intel.com> Cc: Feng Tian <feng.tian@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-02-10MdeModulePkg PeiCore: Don't cache GUIDED section with AUTH_NOT_TESTEDLiming Gao
If GUIDED section authentication has EFI_AUTH_STATUS_NOT_TESTED, its matched extraction ppi may not be installed. So, don't cache its data. Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-02-10MdeModulePkg PeiCore: Reset PeimNeedingDispatch when its security violationLiming Gao
When PEIM is security violation, its matched extraction ppi may not be installed. So, its PeimNeedingDispatch will still reset to TRUE. Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-02-09MdeModulePkg/DxeHttpLib: Correct the return status for the HTTP ↵Jiaxin Wu
Port/ContentLength Replace AsciiStrDecimalToUintn with AsciiStrDecimalToUintnS to return the correct status for the HTTP Port/ContentLength. Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-02-08MdeModulePkg/UefiBootManagerLib: Initialize Handle before using itRuiyu Ni
BmExpandMediaDevicePath contains a bug that it uses the uninitialized Handle. Since the function is called when the Handle supports BlockIo or SimpleFileSystem, when there is no SimpleFileSystem installed on the Handle, BlockIo is *guaranteed* to be installed on the Handle. The fix initializes the Handle by locating the BlockIo protocol from the device path. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Sunny Wang <sunnywang@hpe.com>
2017-02-08MdeModulePkg: Fix some typos of "according"Liming Gao
Cc: Feng Tian <feng.tian@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Rebecca Cran <rebecca@bluestop.org> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> Reviewed-by: He Junjie <junjie.he@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2017-01-25MdeModulePkg: VariableDxe: Use UEFI_VARIABLE_DATAZhang, Chao B
Use UEFI_VARIABLE_DATA data structure according to TCG PC-Client PFP Spec 00.21. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf Cc: Star Zeng <star.zeng@intel.com> Cc: Yao Jiewen <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
2017-01-24MdeModulePkg: Update PcdSmbiosDocRev to 0x1 for SMBIOS spec 3.1.1Star Zeng
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=349 Cc: Feng Tian <feng.tian@intel.com> Cc: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-24MdeModulePkg/FrameBufferBltLib: Use dynamic allocated line bufferRuiyu Ni
https://bugzilla.tianocore.org/show_bug.cgi?id=339 The patch uses dynamic allocated line buffer to reduce memory usage of frame buffer configure. (Original implementation uses 0x4000 bytes for line buffer.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-24MdeModulePkg/FrameBufferBltLib: Refine ConfigurePixelBitMaskFormatRuiyu Ni
https://bugzilla.tianocore.org/show_bug.cgi?id=339 The patch refines ConfigurePixelBitMaskFormat() to prepare the enhancement in next commit: Enhance this library to use dynamic allocated line buffer to reduce memory usage of frame buffer configure. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-22MdeModulePkg: Variable: Update PCR[7] measure for new TCG specZhang, Chao B
Measure DBT into PCR[7] when it is updated between initial measure and ExitBootService. Measure "SecureBoot" change after PK update. Spec version : TCG PC Client PFP 00.37. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf Cc: Star Zeng <star.zeng@intel.com> Cc: Yao Jiewen <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
2017-01-22MdeModulePkg: Update PcdSmbiosVersion to 0x0301 for SMBIOS spec 3.1.0Star Zeng
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340 Cc: Feng Tian <feng.tian@intel.com> Cc: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-20MdeModulePkg: Use EfiEventEmptyFunction from UefiLibStar Zeng
Use EfiEventEmptyFunction from UefiLib and remove the duplication of event empty function. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=298 Cc: Feng Tian <feng.tian@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-20MdeModulePkg: Remove superfluous return statementsThomas Huth
If the code eventually returns "Status" anyway, it does not make sense to explicitly return "Status" in case of an error, too. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-01-20MdeModulePkg/UfsBlockIoPei: fix initialize OCS value to 0x0FHaojian Zhuang
The OCS value should be initiliazed as 0x0F according to UFS spec. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-20MdeModulePkg/UfsPassThruDxe: fix initialize OCS value to 0x0FHaojian Zhuang
The OCS value should be initiliazed as 0x0F according to UFS spec. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-20MdeModulePkg/UfsBlockIoPei: fix the bit in UFS_HC_UTRLDBR_OFFSET regHaojian Zhuang
When UPIU packet is sent, (BIT0 << Slot) should be set according to context. But BIT0 is used without Slot when UfsWaitMemSet () is invoked. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-20MdeModulePkg/UfsPassThruDxe: fix the bit in UFS_HC_UTRLDBR_OFFSET regHaojian Zhuang
When UPIU packet is sent, (BIT0 << Slot) should be set according to context. But BIT0 is used without Slot when UfsWaitMemSet () is invoked. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-20MdeModuelPkg/UfsPassThruDxe: fix to identify 32 bits address modeHaojian Zhuang
When UFS_HC_CAP_64ADDR bit is set, it means 64-bit address, not 32-bit address. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-19MdeModulePkg/FileExplorer: Enable functionality of creating new file/folderDandan Bi
https://bugzilla.tianocore.org/show_bug.cgi?id=324 Enhance the FileExplorerlib so that user can create a new file/folder through the UI page. Cc: Eric Dong <eric.dong@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
2017-01-19MdeModulePkg/FileExplorer: Update QuesrionId when Updating FileExplore formDandan Bi
https://bugzilla.tianocore.org/show_bug.cgi?id=342 When user select and enter a directory, File Explorer will update the form based on the new folders and files in the directory. But when creating question opcodes, the question id is same with previous one and this will cause browser to show the highlight menu incorrectly. Cc: Eric Dong <eric.dong@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
2017-01-19MdeModulePkg/FileExplorer: Remove the codes of searching load file protocolDandan Bi
https://bugzilla.tianocore.org/show_bug.cgi?id=323 FileExplorer no need to search load file protocol to show files. Now remove the codes. Cc: Eric Dong <eric.dong@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
2017-01-16MdeModulePkg/TerminalDxe: Refine SetTerminalDevicePathHao Wu
Pass '&Node.Header' instead of '&Node' as the 1st parameter to function SetDevicePathNodeLength(). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-01-13MdeModulePkg DxeCorePerformanceLib: Only support linking with DxeCoreStar Zeng
DxeCorePerformanceLib is the performance log manager of PEI and DXE phase, and it will also produce Performance(Ex) protocol, it should only support linking with DxeCore. Cc: Liming Gao <liming.gao@intel.com> Cc: Feng Tian <feng.tian@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-01-13MdeModulePkg/TerminalDxe: Remove out-of-dated commentsRuiyu Ni
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-01-12MdeModulePkg/NonDiscoverable: Compare SIZE_4GB with address typeHao Wu
Refine the codes to compare the definition 'SIZE_4GB' with type EFI_PHYSICAL_ADDRESS. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-01-12MdeModulePkg/UefiBootManagerLib: Remove redundant type castHao Wu
The type of return value for function EfiBootManagerFindLoadOption() is INTN. When checking its return value, it is unnecessary to type cast -1 to type UINTN. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Sunny Wang <sunnywang@hpe.com>
2017-01-12MdeModulePkg/Stall: Refine to compare 2 values with the same typeHao Wu
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-12MdeModulePkg/DxeCore:Clear RT attribute on SetCapabilities.Jiewen Yao
When gDS->SetMemorySpaceCapabilities() is called, current DXE core will sync all GCD attributes to memory map attributes, including RUNTIME attributes. It is wrong, because RUNTIME attributes should be set for runtime memory only. This fix clears the RUNTIME attributes before convert to UEFI memory map. So that the UEFI memory map is good after gDS->SetMemorySpaceCapabilities() is called. Cc: Star Zeng <star.zeng@intel.com> Cc: Feng Tian <feng.tian@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-01-11MdeModulePkg/TerminalDxe: Fix driver model bugRuiyu Ni
TerminalDxe driver contains bugs in its DriverBindingStart(): 1. It cannot be started AGAIN using a different terminal type; 2. It doesn't install SimpleTextInput/SimpleTextOut when ConIn/ConOut doesn't contain its device path. The check is duplicated of the same logic in ConPlatform driver and can be removed. The patch optimized the code to remove the unnecessary gEfiCallerIdGuid protocol installation. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-11MdeModulePkg/TerminalDxe: Remove unnecessary NULL pointer checkRuiyu Ni
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-11MdeModulePkg/TerminalDxe: Separate state machine start/stop logicRuiyu Ni
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
2017-01-11MdeModulePkg/TerminalDxe: Refine SetTerminalDevicePathRuiyu Ni
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 21:00:00 +0000