| Age | Commit message (Collapse) | Author |
|---|
|
The HTTP Token Wrap is created in EfiHttpResponse() and then passed
to the deferred Receive event callback, HttpTcpReceiveNotifyDpc.
HttpTcpReceiveHeader and HttpTcpReceiveBody use a Tcp polling loop to
monitor the socket status and trigger the Receive event when a new
packet arrives. The Receive event brings up HttpTcpReceiveNotifyDpc
to process the HTTP message and the function will set Wrap->TcpWrap.IsRxDone
to TRUE to break the Tcp polling loop.
However, HttpTcpReceiveNotifyDpc mistakenly freed Wrap, so the Tcp
polling loop was actually checking a dead variable, and this led the
system into an unstable status.
Given the fact that the HTTP Token Wrap will be freed in EfiHttpResponse
or HttpResponseWorker, this commit removes every "FreePool (Wrap)" in
HttpTcpReceiveNotifyDpc.
v2:
* Free Wrap after HttpTcpReceiveBody returns normally.
Cc: "Wu, Jiaxin" <jiaxin.wu@intel.com>
Cc: "Siyuan Fu" <siyuan.fu@intel.com>
Cc: "El-Haj-Mahmoud, Samer" <samer.el-haj-mahmoud@hpe.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Hegde, Nagaraj P" <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
SockProcessRcvToken only returns the number of the received bytes, not
an EFI Status.
Cc: "Siyuan Fu" <siyuan.fu@intel.com>
Cc: "Jiaxin Wu" <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
Code changes enables HttpDxe to handle PUT/POST operations.
EfiHttpRequest assumes "Request" and "HttpMsg->Headers" can
never be NULL. Also, HttpResponseWorker assumes HTTP Reponse
will contain headers. We could have response which could contain
only a string (HTTP 100 Continue) and no headers. Code changes
tries to do-away from these assumptions, which would enable
HttpDxe to support PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P nagaraj-p.hegde@hpe.com
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Per the description of HttpBootGetBootFile, the function should return
EFI_BUFFER_TOO_SMALL if the given buffer is smaller than the remote image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
If two attempts added on different NIC and enable
MPIO attribute, then change the attempts order. If
both two attempts succeed to connect the target,it
should abort the later one in the order and uninstall
ExtScsiPassThruProtocol Interface, But now it
unistall it twice.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
Make sure "File" field is not overloaded to carry other DHCP options before use
it in PXE driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
Make sure "File" field is not overloaded to carry other DHCP options before use
it in HTTP boot driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
We always need to call EfiBootManagerFreeLoadOption because the memory allocated
for NewOption (description and device path) is no longer needed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
booted more than once
This issue can be reproduced by the following steps:
1. Boot to HTTP boot option and the boot file is a ISO file like Ubuntu PE image.
2. Exit from boot option (GRUB) and then back to boot manager menu.
3. Boot to the same HTTP boot option again or a HTTP boot option pointing to the same HTTP ISO file. It will fail to boot.
Root cause:
When booting a HTTP boot option, the HTTP boot driver will save the Boot File's information in its private data as cache data for skipping the Boot file discovery from next time boot. However, the cache data doesn't include ImageType data, which would cause HTTP boot driver using the invalid ImageType (ImageTypeMax) and then fail to boot the cached boot file. In other words, for the second time boot, the HttpBootLoadFile() doesn't update ImageType (it returns a valid ImageType), which causes that the HttpBootDxeLoadFile() skips to Register a RAM Disk for downloaded HTTP ISO file and then BDS code can't find the RAM disk to boot.
Solution:
Save ImageType to private data for next time HTTP boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
EFI_PXE_BASE_CODE_PROTOCOL has interface to set the TTL and ToS value, but
not used by the UdpWrite() interface. The code always use a hard coded 16
for the TTL and 0 for ToS.
This patch update the UpdWrite() to use the TTL and ToS which have been set
by the SetParameters().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Samer El-Haj-Mahmoud <elhaj@hpe.com>
|
|
This patch updates the HTTP boot driver to use the API in UefiBootManagerLib to
create new load option, to avoid duplicate code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: : Ye Ting <ting.ye@intel.com>
Reviewed-by: : Ni Ruiyu <ruiyu.ni@intel.com>
|
|
FragmentBuffer of each TcpWrap in HttpDxe should not be
freed in HttpTcpTokenCleanup(). This buffer points to
HttpMsg body actually, which is the responsibility of the
caller to allocate a buffer for Body.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
Need the timer check to avoid the indefinite wait case
in HttpDxe driver
A.HTTP receive Header process in HttpTcpReceiveHeader();
B.HTTP receive Body process in HttpTcpReceiveBody();
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
HttpGenRequestString is updated to HttpGenRequestMessage,
with an additional argument. This patch updates the caller
of the DxeHttpLib API. Also, we will avoid adding any '\0'
to the string, which was added to make AsciiStrLen to
work on the string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
|
|
This patch updates the HTTP Boot Configuration page to allow the user to create
a corporate mode HTTP boot option, by leaving the URI string empty.
The patch also fix a bug that the L"https://" should use StrnCmp() with Length 8.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Fix GCC build error when refine the codes of iSCSI driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
EFI_NOT_READY should not be treated as an error status
returned from SetData for Ip6ConfigDataTypeManualAddress
since there is an asynchronous operation for DAD process.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
|
|
This patch updates the HTTP Boot driver to support the download and boot
a RAM disk image from HTTP server.
The HTTP RAM disk boot is described in section 23.7 "HTTP Boot" in
UEFI 2.6. HTTP server could provide either an UEFI image or a RAM disk image
for the HTTP boot client to use. The RAM disk image must contain a UEFI
compliant file system in it.
HTTP boot driver will identify the image type either by the "Content-Type"
entity header filed or by the file name extension as below:
"application/efi" or *.efi -> EFI Image
*.iso -> CD/DVD Image
*.img -> Virtual Disk Image
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
|
|
v2:
*refine some codes
Add 2 macros in NetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@@hpe.com>
|
|
Arbitrary length of packet may be received from network, including the
packets with zero payload data or malformed protocol header. So the code
much check the actually received data size before using it. For example, in
current edk2 network stack, an zero payload UDP packet may cause the
platform ASSERT in NetbufFromExt() because of the zero fragment number.
This patch update the IpIoLib and UdpIoLib to check and discard the zero
payload data packet to avoid above assert. Some other network drivers are
also updated to check the packet size to guarantee the minimum length of
protocol header is received from upper layer driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
|
|
when to parse the DHCP6 reply packet,there will be 6
bytes offset before the option data according to
RFC 3315.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
When http boot download the second time without return
out of the boot manager, the DHCP process will start twice
with the same Boot file uri and print the information twice
which we not expected. This is caused by wrong logic
of handling the device path of the boot file when loading it.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
According to UEFI spec, HII_Config_Access.RouteConfig() should return success
if the required configuration has been processed. Current HTTP boot driver
may return error code in some situation, which failed the UEFI SCT test.
This patch fix this issue by removing the returned error status code and adding
extra check point in the Callback() function, which will pop up a message box
if user input an unsupported URI string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Dong Eric <eric.dong@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
The HTTP Boot driver have some UEFI driver model problems which will make the
code ASSERT when it's disconnected.
First, the driver opens the HttpSb protocol BY_CHILD without BY_DRIVER attribute.
So the driver binding stop won't be called when HTTP driver is disconnected, so
a child handle is left and made HTTP driver binding stop function goes into error.
This patch remove this unnecessary OpenProtocol and only unload the HII from when
both the IP4 and IP6 stack have been stopped completely.
The second issue is the HTTP boot driver always use the driver's image handle as
it's driver binding handle, it's not correct. HTTP Boot driver provides 2 separate
driver binding protocols from IP4 and IP6 stack, so it has 2 driver binding handle.
So this patch fix the code to use correct driver binding handle when create/open
a HTTP child handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
|
|
refine the code of ifconfig6 and ping6 application.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
This issue is caused by the string token ID for help message,
which is defined in the internal head file.
This head file is used for reference more than once. So,
multiple definition for the string token ID error will be
enrolled.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zhang, Lubo <lubo.zhang@intel.com>
|
|
After submitting changes for HttpLib, other modules should be able to use
those functions
1 remove the private function and their calls
2 update it with the functions from httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Commit fa848a404894 ("NetworkPkg: Add URI configuration form to HTTP boot
driver") causes the build to fail with gcc:
> NetworkPkg/HttpBootDxe/HttpBootConfig.c: In function
> 'HttpBootAddBootOption':
> NetworkPkg/HttpBootDxe/HttpBootConfig.c:148:14:
> error: passing argument 3 of 'GetVariable2' from incompatible pointer
> type [-Werror]
> );
> ^
> In file included from NetworkPkg/HttpBootDxe/HttpBootDxe.h:31:0,
> from NetworkPkg/HttpBootDxe/HttpBootConfig.c:15:
> MdePkg/Include/Library/UefiLib.h:708:1: note: expected 'void **' but
> argument is of type 'CHAR16 **'
> GetVariable2 (
> ^
> cc1: all warnings being treated as errors
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
v2:
*Modify the logic of show SAD,SPD and PAD help info, include them in -?
instead of follow -p command.
Since Shell supports finding help information from resource section
of application image. We modify the Shell application Under NetworkPkg
to support print help information string using -? command.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
This patch updates the HTTP boot driver to produce a setup page for the boot
file URI configuration. A new boot option will be created for the manual
configured URI address. This change is made to support the HTTP boot usage
in home environment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
'eb213f2f' is associated with '3d0a49ad' commit. So, this patch is
used to respond the revert for '3d0a49ad' to adapt the Ipv4 config
policy update.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
The default policy for Ip6Config is Ip6ConfigPolicyAutomatic,
which results in all NIC ports starting SARR process when it
receives RA message with M flag from IPv6 router. So, this
patch is used to changes the the default IPv6 config policy to
Ip6ConfigPolicyManualand also defer the SetData operation after
Ip6ConfigProtocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip6ConfigProtocol.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
Change HttpDxe and HttpBootDxe to use the standard definitions from
Http11.h instead of private duplicate definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
This patch is used to replace the internal function with
the exposed one defined in NetLib.h.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Fix a possible buffer overrun issue that could occur if PrefixLength >
128 . Changed == 128 to >= 128. Also remove check for Byte < 16, which
is no longer possible because of the first change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Fix a minor grammatical error in the PXE boot message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
v4:
* Update macro HTTP_ERROR_STATUS to HTTP_ERROR_OR_NOT_SUPPORT_STATUS_CODE
Update copyright year.
When the Error Status of ResponseData returned from HttpIoRecvResponse
function during the Http HEAD method, it should also return error status
to Load file protocol.
Add a new error status code EFI_HTTP_ERROR in corresponding with the
UEFI 2.6 spec . When a HTTP error occurred during the network operation,
The EFI_HTTP_ERROR is returned in token.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
This patch is used to fix suspicious dereference of pointer 'Mode.Ia'
before NULL check.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
This patch is used to correct inconsistent function descriptions
in DnsDxe.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19781 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Change HTTP API typos and clarify returned status code in HTTP API.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19761 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Multiple network protocols have a GetModeData() interface, which may
allocate memory resource in the return mode data structure. It's
callers responsibility to free these buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19758 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19675 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The current implementation doesn't handle the relationship
between SPD and SAD well, which may introduce some security
and connection issue after SPD updated.
For SPD entry edit policy, if one SPD entry is edited/updated,
the original SAs list should be discard. Current IPSecConfig
tool does not dealt properly with those rules.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19653 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The current implementation doesn't handle the relationship between
SPD and SAD well, which may introduce some security and connection
issue after SPD updated.
For SPD SetData policy:
A) When delete the existed SPD entry, its related SAs also should be
removed from its Sas list(SadEntry->BySpd). If the SA entry is
established by IKE, we can remove it from global SAD list(SadEntry->List)
and then free it directly since its SpdEntry will be freed later.
B) SPD SetData operation should do some setting date validity-check.
For example, whether the SaId specified by setting Data is valid. If
the setting date is invalid, EFI_INVALID_PARAMETER should be returned.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19652 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This patch is used to remove DNS QType and QClass definition in
DnsImpl.h since it will be exposed in NetLib.h.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19643 6f19259b-4bc3-4df7-8a09-765794883524
|
