summaryrefslogtreecommitdiff
path: root/OvmfPkg/OvmfPkgX64.fdf
AgeCommit message (Collapse)Author
2016-09-02OvmfPkg: Use MdeModulePkg/ResetSystemRuntimeDxeRuiyu Ni
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
2016-09-01OvmfPkg: include VirtioGpuDxe in the platform DSC/FDF filesLaszlo Ersek
At this stage, the driver builds, and suffices for testing binding and unbinding. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-08-02OvmfPkg: use StatusCode Router and Handler from MdeModulePkgCinnamon Shia
In the Platform Init v1.4a spec, - Volume 1 "4.7 Status Code Service" defines the EFI_PEI_SERVICES.ReportStatusCode() service, - Volume 1 "6.3.5 Status Code PPI (Optional)" defines the EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above), - Volume 2 "14.2 Status Code Runtime Protocol" defines the EFI_STATUS_CODE_PROTOCOL. These allow PEIMs and DXE (and later) modules to report status codes. Currently OvmfPkg uses modules from under "IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above abstractions (PPI and PROTOCOL) directly, and write the status codes, as they are reported, to the serial port or to a memory buffer. This is called "handling" the status codes. In the Platform Init v1.4a spec, - Volume 3 "7.2.2 Report Status Code Handler PPI" defines EFI_PEI_RSC_HANDLER_PPI, - Volume 3 "7.2.1 Report Status Code Handler Protocol" defines EFI_RSC_HANDLER_PROTOCOL. These allow several PEIMs and runtime DXE drivers to register callbacks for status code handling. MdeModulePkg offers a PEIM under "MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe" that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL. MdeModulePkg also offers status code handler modules under MdeModulePkg/Universal/StatusCodeHandler/ that depend on EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively. The StatusCodeHandler modules register themselves with ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI / EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches the phase-matching ReportStatusCodeRouter module first, which in turn passes the status code to the pre-registered, phase-matching StatusCodeHandler module. The status code handling in the StatusCodeHandler modules is identical to the one currently provided by the IntelFrameworkModulePkg modules. Replace the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can decrease our dependency on IntelFrameworkModulePkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com> Suggested-by: Liming Gao <liming.gao@intel.com> Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63 [jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos] Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2016-07-15OvmfPkg: include UefiCpuPkg/CpuMpPeiLaszlo Ersek
In the next patch we're going to put EFI_PEI_MP_SERVICES_PPI to use. CpuMpPei uses the following PCDs from gUefiCpuPkgTokenSpaceGuid, beyond those already used by CpuDxe: - PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize: these control whether CpuMpPei performs microcode update. If the region size is zero, then the microcode update is skipped. UefiCpuPkg.dec sets the region size to zero by default, which is appropriate for OVMF. - PcdCpuApLoopMode and PcdCpuApTargetCstate: the former controls how CpuMpPei puts the APs to sleep: 1 -- HLT, 2 -- MWAIT, 3 -- busy wait (with PAUSE). The latter PCD is only relevant if the former PCD is 2 (MWAIT). In order to be consistent with SeaBIOS and with CpuDxe itself, we choose HLT. That's the default set by UefiCpuPkg.dec. Furthermore, although CpuMpPei could consume SecPeiCpuExceptionHandlerLib technically, it is supposed to consume PeiCpuExceptionHandlerLib. See: - http://thread.gmane.org/gmane.comp.bios.edk2.devel/12703 - git commit a81abf161666 ("UefiCpuPkg/ExceptionLib: Import PeiCpuExceptionHandlerLib module"), part of the series linked above. Jeff recommended to resolve CpuExceptionHandlerLib to PeiCpuExceptionHandlerLib for all PEIMs: - http://thread.gmane.org/gmane.comp.bios.edk2.devel/14471/focus=14477 Since at the moment we have no resolution in place that would cover this for PEIMs (from either [LibraryClasses] or [LibraryClasses.common.PEIM]), it's easy to do. Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-15OvmfPkg: remove PcdS3AcpiReservedMemoryBase, PcdS3AcpiReservedMemorySizeLaszlo Ersek
No module in OvmfPkg uses these PCDs any longer. The first PCD mentioned is declared by OvmfPkg, so we can remove even the declaration. The second PCD comes from IntelFrameworkModulePkg. The module that consumes PcdS3AcpiReservedMemorySize is called "IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe", and it is built into OVMF. However, AcpiS3SaveDxe consumes the PCD only conditionally: it depends on the feature PCD called PcdFrameworkCompatibilitySupport, which we never enable in OVMF. The 32KB gap that used to be the S3 permanent PEI memory is left unused in MEMFD for now; it never hurts to have a few KB available there, for future features. Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-13OvmfPkg: add PciHotPlugInitDxeLaszlo Ersek
After IncompatiblePciDeviceSupportDxe, this is another small driver / protocol implementation that tweaks the behavior of the PCI bus driver in edk2. The protocol is specified in the Platform Init Spec v1.4a, Volume 5, Chapter 12.6 "PCI Hot Plug PCI Initialization Protocol". This implementation steers the PCI bus driver to reserve the following resources ("padding") for each PCI bus, in addition to the BARs of the devices on that PCI bus: - 2MB of 64-bit non-prefetchable MMIO aperture, - 512B of IO port space. The goal is to reserve room for devices hot-plugged at runtime even if the bridge receiving the device is empty at boot time. The 2MB MMIO size is inspired by SeaBIOS. The 512B IO port size is actually only 1/8th of the PCI spec mandated reservation, but the specified size of 4096 has proved wasteful (given the limited size of our IO port space -- see commit bba734ab4c7c). Especially on Q35, where every PCIe root port and downstream port qualifies as a separate bridge (capable of accepting a single device). Test results for this patch: - regardless of our request for 64-bit MMIO reservation, it is downgraded to 32-bit, - although we request 512B alignment for the IO port space reservation, the next upstream bridge rounds it up to 4096B. Cc: "Johnson, Brian J." <bjohnson@sgi.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Andrew Fish <afish@apple.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Suggested-by: Andrew Fish <afish@apple.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
2016-07-13OvmfPkg: add a Name GUID to each Firmware VolumeLaszlo Ersek
The FDF spec mentions the FvNameGuid statement for [FV.xxxx] sections, but the detailed description can be found in Volume 3 of the Platform Init spec (which is at 1.4a currently). Adding an FvNameGuid statement to [FV.xxx] has the following effects (implemented by "BaseTools/Source/C/GenFv/GenFvInternalLib.c"): - The EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset field is set to a nonzero value, pointing after EFI_FIRMWARE_VOLUME_HEADER itself (although not directly, see below). - An EFI_FIRMWARE_VOLUME_EXT_HEADER object is created at the pointed-to address. This object is not followed by any EFI_FIRMWARE_VOLUME_EXT_ENTRY (= extension) entries, so it only specifies the Name GUID for the firmware volume. The EFI_FIRMWARE_VOLUME_EXT_HEADER for each firmware volume can be found in the Build directory as a separate file (20 bytes in size): Build/Ovmf*/*_GCC*/FV/*.ext - The new data consume 48 bytes in the following volumes: SECFV, FVMAIN_COMPACT, DXEFV. They comprise: - 16 padding bytes, - EFI_FFS_FILE_HEADER2 (8 bytes in total: no Name and ExtendedSize fields, and Type=EFI_FV_FILETYPE_FFS_PAD), - EFI_FIRMWARE_VOLUME_EXT_HEADER (20 bytes, see above), - 4 padding bytes. (The initial 16 padding bytes and the EFI_FFS_FILE_HEADER2 structure are the reason why EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset does not point immediately past EFI_FIRMWARE_VOLUME_HEADER.) The sizes of the firmware volumes don't change, only their internal usages grow by 48 bytes. I verified that the statements and calculations in "OvmfPkg/DecomprScratchEnd.fdf.inc" are unaffected and remain valid. - The new data consume 0 bytes in PEIFV. This is because PEIFV has enough internal padding at the moment to accomodate the above structures without a growth in usage. In the future, firmware volumes can be identified by Name GUID (Fv(...) device path nodes), rather than memory location (MemoryMapped(...) device path nodes). This is supposed to improve stability for persistent device paths that refer to FFS files; for example, UEFI boot options. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-06-28OvmfPkg: Re-add the Driver Health ManagerBruce Cran
The Driver Health HII menu is not an integral part of the MdeModulePkg BDS driver / UI app. Because we abandoned the IntelFrameworkModulePkg BDS, now we have to get the same functionality explicitly from DriverHealthManagerDxe. Suggested-by: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Bruce Cran <bruce.cran@gmail.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> [lersek@redhat.com: update commit message] Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2016-05-31OvmfPkg: raise DXEFV size to 10 MBGary Lin
We reached the size limit again. Building OVMF with the following command $ ./OvmfPkg/build.sh -D SECURE_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D HTTP_BOOT_ENABLE and it ended up with GenFds.py... GenFv: ERROR 3000: Invalid : error 7000: Failed to generate FV the required fv image size 0x900450 exceeds the set fv image size 0x900000 Since the new UEFI features, such as HTTPS, are coming, we need a larger DEXFV eventually. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-25OvmfPkg: prevent 64-bit MMIO BAR degradation if there is no CSMLaszlo Ersek
According to edk2 commit "MdeModulePkg/PciBus: do not improperly degrade resource" and to the EFI_INCOMPATIBLE_PCI_DEVICE_SUPPORT_PROTOCOL definition in the Platform Init 1.4a specification, a platform can provide such a protocol in order to influence the PCI resource allocation performed by the PCI Bus driver. In particular it is possible instruct the PCI Bus driver, with a "wildcard" hint, to allocate the 64-bit MMIO BARs of a device in 64-bit address space, regardless of whether the device features an option ROM. (By default, the PCI Bus driver considers an option ROM reason enough for allocating the 64-bit MMIO BARs in 32-bit address space. It cannot know if BDS will launch a legacy boot option, and under legacy boot, a legacy BIOS binary from a combined option ROM could be dispatched, and fail to access MMIO BARs in 64-bit address space.) In platform code we can ascertain whether a CSM is present or not. If not, then legacy BIOS binaries in option ROMs can't be dispatched, hence the BAR degradation is detrimental, and we should prevent it. This is expected to conserve the 32-bit address space for 32-bit MMIO BARs. The driver added in this patch could be simplified based on the following facts: - In the Ia32 build, the 64-bit MMIO aperture is always zero-size, hence the driver will exit immediately. Therefore the driver could be omitted from the Ia32 build. - In the Ia32X64 and X64 builds, the driver could be omitted if CSM_ENABLE was defined (because in that case the degradation would be justified). On the other hand, if CSM_ENABLE was undefined, then the driver could be included, and it could provide the hint unconditionally (without looking for the Legacy BIOS protocol). These short-cuts are not taken because they would increase the differences between the OVMF DSC/FDF files. If we can manage without extreme complexity, we should use dynamic logic (vs. build time configuration), plus keep conditional compilation to a minimum. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-25OvmfPkg: remove USE_OLD_BDS build fallback macroLaszlo Ersek
Reasons: - USE_OLD_BDS requires duplicating updates between OVMF's library instances that depend on USE_OLD_BDS being FALSE vs. TRUE. Examples: d5aee61bfaaa OvmfPkg/QemuNewBootOrderLib: adapt Q35 SATA PMPN to UEFI spec Mantis 1353 1da761664949 OvmfPkg/QemuBootOrderLib: adapt Q35 SATA PMPN to UEFI spec Mantis 1353 - The Xen community has embraced the new BDS. Examples: 14b2ebc30c8b OvmfPkg/PlatformBootManagerLib: Postpone the shell registration 49effaf26ec9 OvmfPkg/PciHostBridgeLib: Scan for root bridges when running over Xen - OVMF doesn't build with "-D USE_OLD_BDS -D HTTP_BOOT_ENABLE" anyway, as NetworkPkg/HttpBootDxe now requires UefiBootManagerLib: 50a65824c74a NetworkPkg: Use UefiBootManagerLib API to create load option. We (correctly) don't resolve UefiBootManagerLib when USE_OLD_BDS is TRUE. - The new BDS has been working well; for example it's the only BDS available in ArmVirtPkg: 1946faa710e6 ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gary Ching-Pang Lin <glin@suse.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-10OvmfPkg: Modify FDF/DSC files for RamDiskDxe's adding NFIT report featureHao Wu
The RamDiskDxe driver in MdeModulePkg now will use EFI_ACPI_TABLE_PROTOCOL and EFI_ACPI_SDT_PROTOCOL during reporting RAM disks to NVDIMM Firmware Interface Table (NFIT). A Pcd 'PcdInstallAcpiSdtProtocol' controls whether the EFI_ACPI_SDT_PROTOCOL will be produced. Its default value is set to FALSE in MdeModulePkg. To make the NFIT reporting feature working properly under OVMF, the patch will set the Pcd to TRUE in OVMF DSC files. Also, the RamDiskDxe driver will sometimes report a NVDIMM Root Device using ASL code which is put in a Secondary System Description Table (SSDT) according to the ACPI 6.1 spec. Locating the SSDT requires modifying the [Rule.Common.DXE_DRIVER] field in OVMF FDF files. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
2016-05-04OvmfPkg: Use MdeModulePkg/BDSRuiyu Ni
By default the new MdeModulePkg/BDS is used. If USE_OLD_BDS is defined to TRUE, IntelFrameworkModulePkg/BDS is used. Fixes: https://github.com/tianocore/edk2/issues/62 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-04-07OvmfPkg: remove USE_OLD_PCI_HOST build optionLaszlo Ersek
It's been a month since the following commits appeared in the repo: 4014885ffdfa8 OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe c47ed6fcb5e60 OvmfPkg: match PCI config access to machine type (if not USE_OLD_PCI_HOST) in which we introduced the USE_OLD_PCI_HOST fallback, and made other work depend on it. I have not heard of any problems (primarily from the vfio-users group that uses Gerd's daily / hourly OVMF builds), so it's time to drop the fallback. Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-04-07OvmfPkg: Convert to using FatPkg in the EDK II treeJordan Justen
Now that FatPkg is open source (and therefore can be included in the EDK II tree) we build and use it directly. Build tested with GCC 5.3 on IA32 and X64. Boot tested to UEFI Shell on IA32 and UEFI Linux on X64. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-04-07OvmfPkg: Retire AcpiS3SaveDxeStar Zeng
The same functional code has been in S3SaveStateDxe, OVMF AcpiS3SaveDxe can be retired now. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2016-04-06OvmfPkg: include Virtio10DxeLaszlo Ersek
Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-04-01OvmfPkg: Add RAM disk supportAlcantara, Paulo
Currently booting off of a RAM disk is not supported by IntelFrameWorkModulePkg BDS, however on systems without writable disks, the RAM disk can be made useful when loading raw HDD images into it -- specially the ones with a FAT32 partition on which files can be natively accessed by system firmware. This patch adds RamDiskDxe driver by default in OVMF platform. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-03OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxeLaszlo Ersek
The old driver is retained for now; it remains available with "-D USE_OLD_PCI_HOST". This is because I'd like to involve end users and downstreams in testing the new drier, but also allow them to switch back to the old driver at the first sight of trouble, while we debug the new driver in parallel. In a few weeks the ifdeffery and the "OvmfPkg/PciHostBridgeDxe/" driver should be removed. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-02-24OvmfPkg: add driver for Virtio-RNG deviceArd Biesheuvel
This adds the new Virtio-RNG DXE module to all three builds of OvmfPkg. Note that QEMU needs to be invoked with the 'device virtio-rng-pci' option in order for this device to be exposed to the guest. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-02-02OvmfPkg: include NvmExpressDxe driverLaszlo Ersek
QEMU emulates NVMe. NvmExpressDxe seems to work well with it. The relevant QEMU options are -drive id=drive0,if=none,format=FORMAT,file=PATHNAME \ -device nvme,drive=drive0,serial=SERIAL where the required SERIAL value sets the Serial Number (SN) field of the "Identify Controller Data Structure". It is an ASCII string with up to 20 characters, which QEMU pads with spaces to maximum length. (Refer to "NVME_ADMIN_CONTROLLER_DATA.Sn" in "MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.h".) Cc: Vladislav Vovchenko <vladislav.vovchenko@sk.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Reference: https://github.com/tianocore/edk2/issues/48 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Vladislav Vovchenko <vladislav.vovchenko@sk.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19791 6f19259b-4bc3-4df7-8a09-765794883524
2016-01-29OvmfPkg: Increase default RELEASE build image size to 2MBJordan Justen
Fixes: https://github.com/tianocore/edk2/issues/47 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Cc: Bruce Cran <bruce@cran.org.uk> Cc: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19775 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: pull in SMM-based variable driver stackLaszlo Ersek
When -D SMM_REQUIRE is given, replace both - OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf and - OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf with - OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesSmm.inf. The outermost (= runtime DXE driver) VariableSmmRuntimeDxe enters SMM, and the rest: - the privileged half of the variable driver, VariableSmm, - the fault tolerant write driver, FaultTolerantWriteSmm, - and the FVB driver, FvbServicesSmm, work in SMM purely. We also resolve the BaseCryptLib class for DXE_SMM_DRIVER modules, for the authenticated VariableSmm driver's sake. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19065 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: consolidate variable driver stack in DSC and FDF filesLaszlo Ersek
The following modules constitute the variable driver stack: - QemuFlashFvbServicesRuntimeDxe and EmuVariableFvbRuntimeDxe, runtime alternatives for providing the Firmware Volume Block(2) Protocol, dependent on qemu pflash presence, - FaultTolerantWriteDxe, providing the Fault Tolerant Write Protocol, - MdeModulePkg/Universal/Variable/RuntimeDxe, independently of -D SECURE_BOOT_ENABLE, providing the Variable and Variable Write Architectural Protocols. Let's move these drivers closer to each other in the DSC and FDF files, so that we can switch the variable driver stack to SMM with more local changes. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19064 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: build PiSmmCpuDxeSmm for -D SMM_REQUIRELaszlo Ersek
At this point we can enable building PiSmmCpuDxeSmm. CPU specific features, like SMRR detection, and functions that are used to initialize SMM and process SMIs, are abstracted through the SmmCpuFeaturesLib class for the PiSmmCpuDxeSmm module. Resolve it to our own implementation under OvmfPkg -- it allows PiSmmCpuDxeSmm to work with QEMU's and KVM's 64-bit state save map format, which follows the definition from AMD's programmer manual. SmmCpuPlatformHookLib provides platform specific functions that are used to initialize SMM and process SMIs. Resolve it to the one Null instance provided by UefiCpuPkg, which is expected to work for most platforms. Cc: Paolo Bonzini <pbonzini@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> [pbonzini@redhat.com: resolve the SmmCpuFeaturesLib class to OVMF's own instance] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19061 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: build CpuS3DataDxe for -D SMM_REQUIRELaszlo Ersek
The PiSmmCpuDxeSmm driver from UefiCpuPkg depends on the ACPI_CPU_DATA structure -- created by a platform- and CPU-specific driver -- in order to support ACPI S3. The address of this structure is communicated through the dynamic PCD PcdCpuS3DataAddress. The "UefiCpuPkg/Include/AcpiCpuData.h" header file documents the fields of this structure in detail. The simple/generic "UefiCpuPkg/CpuS3DataDxe" driver creates and populates the structure in a conformant way, and it co-operates well with PiSmmCpuDxeSmm, for OVMF's purposes. PlatformBdsLib CpuS3DataDxe PiSmmCpuDxeSmm S3Resume2Pei (DXE_DRIVER) (DXE_DRIVER) (DXE_SMM_DRIVER) (PEIM) -------------- --------------- ---------------- -------------- normal collects data boot except MTRR settings into ACPI_CPU_DATA sets PcdCpuS3Da... signals End-of-Dxe | +----------> collects MTRR settings into ACPI_CPU_DATA installs [Dxe]Smm ReadyToLock | +---------------------------> fetches PcdCpuS3Dat... copies ACPI_CPU_DATA into SMRAM runtime S3 suspend S3 transfers resume control to PiSmmCpuDxe... | uses <----+ ACPI_CPU_DATA from SMRAM Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19060 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: LockBox: use SMM stack with -D SMM_REQUIRELaszlo Ersek
During DXE, drivers save data in the LockBox. A save operation is layered as follows: - The unprivileged driver wishing to store data in the LockBox links against the "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.inf" library instance. The library allows the unprivileged driver to format requests for the privileged SMM LockBox driver (see below), and to parse responses. We apply this resolution for DXE_DRIVER modules. - The privileged SMM LockBox driver is built from "MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf". This driver has module type DXE_SMM_DRIVER and can access SMRAM. The driver delegates command parsing and response formatting to "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf". Therefore we include this DXE_SMM_DRIVER in the build, and apply said resolution specifically to it. (Including the driver requires us to resolve a few of other library classes for DXE_SMM_DRIVER modules.) - In PEI, the S3 Resume PEIM (UefiCpuPkg/Universal/Acpi/S3Resume2Pei) retrieves data from the LockBox. It is capable of searching SMRAM itself. We resolve LockBoxLib to "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" specifically for this one PEIM. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19048 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: pull in CpuIo2Smm driverLaszlo Ersek
This driver provides EFI_SMM_CPU_IO2_PROTOCOL, which the SMM core depends on in its gEfiDxeSmmReadyToLockProtocolGuid callback (SmmReadyToLockHandler(), "MdeModulePkg/Core/PiSmmCore/PiSmmCore.c"). Approached on a higher level, this driver provides the SmmIo member of the EFI_SMM_SYSTEM_TABLE2 (SMST). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19044 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: pull in the SMM IPL and SMM coreLaszlo Ersek
"MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf" (a DXE_RUNTIME_DRIVER) implements the SMM Initial Program Loader. It produces EFI_SMM_BASE2_PROTOCOL and EFI_SMM_COMMUNICATION_PROTOCOL, relying on: - EFI_SMM_ACCESS2_PROTOCOL (provided by OvmfPkg/SmmAccess/SmmAccess2Dxe.inf), - EFI_SMM_CONTROL2_PROTOCOL (provided by OvmfPkg/SmmControl2Dxe/SmmControl2Dxe.inf). (The SMM IPL also depends on EFI_SMM_CONFIGURATION_PROTOCOL_GUID, but this dependency is not enforced in the entry point. A protocol notify callback is registered instead, hence we can delay providing that protocol via the PiSmmCpuDxeSmm driver that is (to be) imported from UefiCpuPkg/.) The SMM IPL loads the SMM core into SMRAM and executes it from there. Therefore we add the SMM core to the build as well. For the SMM core, a number of library classes need to be resolved. Furthermore, each FDF file must provide the GenFds.py BaseTools utility with a build rule for SMM_CORE; we copy the DXE_CORE's rule. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19043 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: implement EFI_SMM_CONTROL2_PROTOCOL with a DXE_RUNTIME_DRIVERLaszlo Ersek
The EFI_SMM_COMMUNICATION_PROTOCOL implementation that is provided by the SMM core depends on EFI_SMM_CONTROL2_PROTOCOL; see the mSmmControl2->Trigger() call in the SmmCommunicationCommunicate() function [MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c]. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19042 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: add DXE_DRIVER for providing TSEG-as-SMRAM during boot-time DXELaszlo Ersek
The SMM core depends on EFI_SMM_ACCESS2_PROTOCOL. This small driver (which is a thin wrapper around "OvmfPkg/SmmAccess/SmramInternal.c" that was added in the previous patch) provides that protocol. Notably, EFI_SMM_ACCESS2_PROTOCOL is for boot time only, therefore our MODULE_TYPE is not DXE_RUNTIME_DRIVER. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19041 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: add PEIM for providing TSEG-as-SMRAM during PEILaszlo Ersek
"MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" is the LockBoxLib instance with SMRAM access for the PEI phase. Said library instance must, and can, access the LockBox data in SMRAM directly if it is invoked before SMBASE relocation / SMI handler installation. In that case, it only needs PEI_SMM_ACCESS_PPI from the platform, and it doesn't depend on EFI_PEI_SMM_COMMUNICATION_PPI. OVMF satisfies the description in SVN r18823 ("MdeModulePkg: SmmLockBoxPeiLib: work without EFI_PEI_SMM_COMMUNICATION_PPI"): in OVMF, only S3Resume2Pei links against SmmLockBoxPeiLib. Therefore, introduce a PEIM that produces the PEI_SMM_ACCESS_PPI interface, enabling SmmLockBoxPeiLib to work; we can omit including "UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf". The load / installation order of S3Resume2Pei and SmmAccessPei is indifferent. SmmAccessPei produces the gEfiAcpiVariableGuid HOB during its installation (which happens during PEI), but S3Resume2Pei accesses the HOB only when the DXE IPL calls its S3RestoreConfig2 PPI member, as last act of PEI. MCH_SMRAM_D_LCK and MCH_ESMRAMC_T_EN are masked out the way they are, in SmmAccessPeiEntryPoint() and SmramAccessOpen() respectively, in order to prevent VS20xx from warning about the (otherwise fully intentional) truncation in the UINT8 casts. (Warnings reported by Michael Kinney.) Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19040 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30OvmfPkg: Sec: assert the build-time calculated end of the scratch bufferLaszlo Ersek
The DecompressMemFvs() function in "OvmfPkg/Sec/SecMain.c" uses more memory, temporarily, than what PEIFV and DXEFV will ultimately need. First, it uses an output buffer for decompression, second, the decompression itself needs a scratch buffer (and this scratch buffer is the highest area that SEC uses). DecompressMemFvs() used to be called on normal boots only (ie. not on S3 resume), which is why the decompression output buffer and the scratch buffer were allowed to scribble over RAM. However, we'll soon start to worry during S3 resume that the runtime OS might tamper with the pre-decompressed PEIFV, and we'll decompress the firmware volumes on S3 resume too, from pristine flash. For this we'll need to know the end of the scratch buffer in advance, so we can prepare a non-malicious OS for it. Calculate the end of the scratch buffer statically in the FDF files, and assert in DecompressMemFvs() that the runtime decompression will match it. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19036 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-07OvmfPkg: raise DXEFV size to 9 MBGary Ching-Pang Lin
With gcc5 and enabling SECURE_BOOT and NETWORK_IP6, the build failed with this error: GenFv: ERROR 3000: Invalid the required fv image size 0x814c18 exceeds the set fv image size 0x800000 Raise the DXEFV size to 9 MB to fix the build error. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Ching-Pang Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18577 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-22OvmfPkg: enable SATA controllerReza Jelveh
In this patch, we replace the traditional IDE driver stack that comes from PcAtChipsetPkg and IntelFrameworkModulePkg with more featureful drivers from OvmfPkg and MdeModulePkg. The resultant driver stack is compatible with the previous one, but provides more protocols, on more kinds of virtual hardware. Remove: - PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf (removing EFI_IDE_CONTROLLER_INIT_PROTOCOL [1]) Remove the dependent: - IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf (removing EFI_DISK_INFO_PROTOCOL [2], EFI_BLOCK_IO_PROTOCOL [3]) As replacement, add: - OvmfPkg/SataControllerDxe/SataControllerDxe.inf (supplying EFI_IDE_CONTROLLER_INIT_PROTOCOL [1]) On top of which, add the dependent: - MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf (providing EFI_ATA_PASS_THRU_PROTOCOL, EFI_EXT_SCSI_PASS_THRU_PROTOCOL) On top of which, add the dependent: - MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf (supplying EFI_DISK_INFO_PROTOCOL [2], EFI_BLOCK_IO_PROTOCOL [3], providing EFI_BLOCK_IO2PROTOCOL, EFI_STORAGE_SECURITY_COMMAND_PROTOCOL) Cc: Alexander Graf <agraf@suse.de> Cc: Reza Jelveh <reza.jelveh@tuhh.de> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Gabriel L. Somlo <somlo@cmu.edu> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de> [lersek@redhat.com: rewrote commit message] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18532 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-28OvmfPkg: Build HTTP utilities driverGary Ching-Pang Lin
Since SVN r18316 / git 5ca29abe5297, the HTTP driver needs the HTTP utilities driver to parse the headers of HTTP requests. Add the driver into OVMF so that the HTTP driver can work properly. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Ching-Pang Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18359 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-23OvmfPkg: Add HttpBoot supportGary Ching-Pang Lin
This commit introdues a new build option to OvmfPkg: HTTP_BOOT_ENABLE. When HttpBoot is enabled, a new Network boot option will show in the boot manager menu with the device path like this: PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv4(0.0.0.0)/Uri() It works like the PXE one but fetches the NBP from the given http url instead of the tftp service. A simple testing environment can be set up with the QEMU tap network and dnsmasq + lighttpd. Here is the example of the dnsmasq config: interface=<tap interface> dhcp-range=192.168.111.100,192.168.111.120,12h dhcp-option=60,"HTTPClient" dhcp-boot="http://<tap ip>/<efi file>" It's similar to the PXE server settings except the tftp function is disabled, the option 60 must be "HTTPClient", and the boot uri is a http url. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Ching-Pang Lin <glin@suse.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18258 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-14OvmfPkg: clone PciHostBridgeDxe from PcAtChipsetPkgLaszlo Ersek
The source code is copied verbatim, with the following two exceptions: - the UNI files are dropped, together with the corresponding UNI references in the INF file, - the INF file receives a new FILE_GUID. The OVMF DSC and FDF files are at once flipped to the cloned driver. Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17951 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-10OvmfPkg: Remove Ip4ConfigDxe module from OvmfPkgJiaxin Wu
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol, which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)). Therefore we can remove Ip4ConfigDxe driver from this build. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17914 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-09OvmfPkg: Fix GCC49 build hang in PeiCoreRuiyu Ni
PeiCore hang when loads a PEIM whose section alignment requirement is 0x40 but the actual base address is 0x20 aligned. The issue is caused by the following facts, in order: 1. GCC49 requires the section alignment of .data to be 0x40. So a new link script gcc4.9-ld-script was added for GCC49 to specify the 0x40 alignment. 2. GenFw tool was enhanced to sync ELF's section alignment to PE header. Before the enhancement, the section alignment of converted PE image always equals to 0x20. If only with #1 change, GCC49 build image won't hang in PeiCore because the converted PE image still claims 0x20 section alignment which is aligned to the align setting set in FDF file. But later with #2 change, the converted PE image starts to claims 0x40 section alignment, while build tool still puts the PEIM in 0x20 aligned address, resulting the PeCoffLoaderLoadImage() reports IMAGE_ERROR_INVALID_SECTION_ALIGNMENT error. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17902 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01OvmfPkg: Use the merged Variable driverStar Zeng
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17767 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16OvmfPkg: include XHCI driverLaszlo Ersek
QEMU commit aa685789 ("xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set") fixed an emulation problem in QEMU; we can now drive that host controller with edk2's XhciDxe. Include it in OvmfPkg, as XHCI emulation is reportedly more virtualization-friendly than EHCI, consuming less CPU. The driver can be tested with the following QEMU command line options: -device nec-usb-xhci -device usb-kbd This patch should not regress existing QEMU command lines (ie. trigger an ASSERT() in XhciDxe that fails on pre-aa685789 QEMU) because QEMU's "-device nec-usb-xhci" has never before resulted in USB devices that worked with edk2 firmware builds, hence users have never had a reason to add that option. Now that they learn about XHCI support in OVMF by reading this commit message, they (or their packagers) will also know to update qemu to aa685789 or later (in practice that means the upcoming 2.3 release), at least if they want to use '-device nec-usb-xhci' with edk2, for the first time ever. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Alexander Graf <agraf@suse.de> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17055 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-28Ovmf/Xen: move XenBusDxe to abstract XENIO_PROTOCOLArd Biesheuvel
While Xen on Intel uses a virtual PCI device to communicate the base address of the grant table, the ARM implementation uses a DT node, which is fundamentally incompatible with the way XenBusDxe is implemented, i.e., as a UEFI Driver Model implementation for a PCI device. Contributed-under: TianoCore Contribution Agreement 1.0 Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16973 6f19259b-4bc3-4df7-8a09-765794883524
2014-12-19OvmfPkg: enable the IPv6 supportGary Lin
There are several network stack drivers in MdeModulePkg or NetworkPkg. Currently, we only use the drivers from MdeModulePkg which only provides the IPv4 support. This commit adds the IPv6 drivers in NetworkPkg into OVMF. Here is the table of drivers from Laszlo. currently included related driver add or replace from MdeModulePkg in NetworkPkg from NetworkPkg ------------------ -------------- --------------- SnpDxe n/a n/a DpcDxe n/a n/a MnpDxe n/a n/a VlanConfigDxe n/a n/a ArpDxe n/a n/a Dhcp4Dxe Dhcp6Dxe add Ip4ConfigDxe Ip6Dxe add Ip4Dxe Ip6Dxe add Mtftp4Dxe Mtftp6Dxe add Tcp4Dxe TcpDxe replace Udp4Dxe Udp6Dxe add UefiPxeBcDxe UefiPxeBcDxe replace IScsiDxe IScsiDxe replace Since the TcpDxe, UefiPxeBcDxe, and IScsiDxe drivers in NetworkPkg also support IPv4, we replace the ones in MdeModulePkg. To enable the IPv6 support, build OVMF with "-D NETWORK_IP6_ENABLE". A special case is NetworkPkg/IScsiDxe. It requires openssl. For convenience, NetworkPkg/IScsiDxe is enabled only if both IPv6 and SecureBoot are enabled. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> [lersek@redhat.com: typo fix in commit message; specil -> special] Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16543 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-29OvmfPkg/XenPvBlkDxe: Xen PV Block device, initial skeletonAnthony PERARD
A ParaVirtualize block driver. Change in V4: - Replace the license by the commonly used file header text. - Add brief description for the driver. Change in V3: - enable compilation for Ia32 and Ia32X64 - fix version (driver binding) Change in V2: - Add minimal support for controller name - Remove stuff about BlockIo2 - Little cleanup - Licenses and file headers - Rename XenbusIo into XenBusIo Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16272 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-29OvmfPkg: Add basic skeleton for the XenBus bus driver.Anthony PERARD
This includes Component Name and Driver Binding. Change in V4: - Replace the license by the commonly used file header text. - Add brief description for the driver. Change in V3: - enable compilation for Ia32 and Ia32X64 - fix version (driver binding) Change in V2: - Simple support of controller name. - Cleaning up comments, files header. - Add Licenses - Rename XenbusDxe to XenBusDxe. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16258 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-02OvmfPkg: disable stale fork of SecureBootConfigDxeLaszlo Ersek
OvmfPkg forked SecureBootConfigDxe from SecurityPkg in SVN r13635 (git commit 8c71ec8f). Since then, the original (in "SecurityPkg/VariableAuthenticated/SecureBootConfigDxe") has diverged significantly. The initial diff between the original and the fork, when the fork was made (ie. at SVN r13635), reads as follows: > diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr > --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr 2014-09-30 23:35:28.598067147 +0200 > +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr 2014-08-09 02:40:35.824851626 +0200 > @@ -51,7 +51,7 @@ > questionid = KEY_SECURE_BOOT_ENABLE, > prompt = STRING_TOKEN(STR_SECURE_BOOT_PROMPT), > help = STRING_TOKEN(STR_SECURE_BOOT_HELP), > - flags = INTERACTIVE | RESET_REQUIRED, > + flags = INTERACTIVE, > endcheckbox; > endif; > > @@ -158,7 +158,7 @@ > questionid = KEY_SECURE_BOOT_DELETE_PK, > prompt = STRING_TOKEN(STR_DELETE_PK), > help = STRING_TOKEN(STR_DELETE_PK_HELP), > - flags = INTERACTIVE | RESET_REQUIRED, > + flags = INTERACTIVE, > endcheckbox; > endif; > endform; > diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf > --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.598067147 +0200 > +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.577067027 +0200 > @@ -1,5 +1,8 @@ > ## @file > -# Component name for SecureBoot configuration module. > +# Component name for SecureBoot configuration module for OVMF. > +# > +# Need custom SecureBootConfigDxe for OVMF that does not force > +# resets after PK changes since OVMF doesn't have persistent variables > # > # Copyright (c) 2011 - 2012, Intel Corporation. All rights reserved.<BR> > # This program and the accompanying materials > diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c > --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.599067153 +0200 > +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.578067033 +0200 > @@ -2559,7 +2559,7 @@ > NULL > ); > } else { > - *ActionRequest = EFI_BROWSER_ACTION_REQUEST_RESET; > + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_SUBMIT; > } > break; The commit message is not overly verbose: OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset We don't force a platform reset for OVMF when PK is changed in custom mode setup. But the INF file hunk is telling: Need custom SecureBootConfigDxe for OVMF that does not force resets after PK changes since OVMF doesn't have persistent variables We do have persistent variables now. Let's disable the (now obsolete) OvmfPkg fork, and revert to the (well maintained) SecurityPkg-provided config driver. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Gary Lin <glin@suse.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16191 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-18OvmfPkg: Build OVMF ResetVector during EDK II build processJordan Justen
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15824 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-22OvmfPkg: build OVMF_VARS.fd, OVMF_CODE.fd, OVMF.fdLaszlo Ersek
OVMF_VARS.fd and OVMF_CODE.fd split the variable store and the firmware code in separate files. The PCDs' values continue to depend only on FD_SIZE_1MB vs. FD_SIZE_2MB. With the split files, it must be ensured on the QEMU command line that OVMF_VARS.fd and OVMF_CODE.fd be contiguously mapped so that they end exactly at 4GB. See QEMU commit 637a5acb (first released in v2.0.0). In this patch we must take care to assign each PCD only once. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15670 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-22OvmfPkg: extract varstore-related FD Layout Regions to an include fileLaszlo Ersek
This saves code duplication between the Ia32, Ia32X64, and X64 flavors, and enables the next patch to include the varstore in new FD files by reference. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15669 6f19259b-4bc3-4df7-8a09-765794883524
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 18:48:24 +0000