| Age | Commit message (Collapse) | Author |
|---|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Guo Mang <mang.guo@intel.com>
|
|
QEMU provides an fw_cfg file called "etc/extra-pci-roots", containing a
little-endian UINT64 value that exposes the number of extra root buses. We
can use this value to terminate the scan as soon as we find the last extra
root bus.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17963 6f19259b-4bc3-4df7-8a09-765794883524
|
|
In this patch we assume that root bus number 0 is always there (same as
before), and scan the rest of the extra root buses, up to and including
255. When an extra root bus is found, we install the PCI root bridge IO
protocol for the previous root bus (which might be bus 0 or just the
previous extra root bus).
The root bridge protocol created thus will report the available bus number
range
[own bus number, next extra root bus number - 1]
The LHS of this interval will be used for the root bus's own number, and
the rest of the interval (which might encompass 0 additional elements too)
can be used by the PCI bus driver to assign subordinate bus numbers from.
(Subordinate buses are provided by PCI bridges that hang off the root bus
in question.)
For MMIO and IO space allocation, all the root buses share the original
[0x8000_0000, 0xFFFF_FFFF] and [0x0, 0xFFFF] ranges, respectively.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17962 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This field was supposed to store the number of root buses created; however
we don't need to keep that count persistently. After the entry point returns,
nothing reads this field.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17961 6f19259b-4bc3-4df7-8a09-765794883524
|
|
On output, the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Configuration() function
produces a pointer to a buffer of ACPI 2.0 resource descriptors:
Resources A pointer to the ACPI 2.0 resource descriptors that describe
the current configuration of this PCI root bridge. The
storage for the ACPI 2.0 resource descriptors is allocated by
this function. The caller must treat the return buffer as
read-only data, and the buffer must not be freed by the
caller.
PciHostBridgeDxe currently provides this buffer in a structure with static
storage duration. If multiple root bridges existed in parallel, the
pointers returned by their Configuration() methods would point to the same
static storage. A later Configuration() call would overwrite the storage
pointed out by an earlier Configuration() call (which was possibly made
for a different, but still alive, root bridge.)
Fix this problem by embedding the configuration buffer in
PCI_ROOT_BRIDGE_INSTANCE.
While we're at it, correct some typos (Desp -> Desc), spell out a missing
pack(1) pragma, and improve formatting.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17960 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The entry point of the driver, InitializePciHostBridge(), leaks resources
(and installed protocols) in the following cases:
- The first root bridge protocol installation fails. In this case, the
host bridge protocol is left installed, but the driver exits with an
error.
- The second or a later root bridge protocol installation fails. In this
case, the host bridge protocol, and all prior root bridge protocols, are
left installed, even though the driver exits with an error.
Handle errors correctly: roll back / release / uninstall resources when
aborting the driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17959 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This new function incorporates the current loop body found in the entry
point function, InitializePciHostBridge(). It will be called once for each
root bus discovered.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17958 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Currently we define a device path for each root bridge statically (for all
one of them). Since we'll want to create a dynamic number of root bridges,
replace the static device paths with a common template, embed the actual
device path into the private root bridge structure, and distinguish the
device paths from each other in the UID field (as required by ACPI).
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17957 6f19259b-4bc3-4df7-8a09-765794883524
|
|
There is no need to store these constants in dedicated static storage
duration objects; we can simply open-code them, simplifying the code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17956 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The entry point function of this driver, InitializePciHostBridge(), and
the static storage duration objects it relies on, are speculatively
generic -- they nominally support more than one host bridges, but (a) the
code hardwires the number of host bridges as 1, (b) it's very unlikely
that we'd ever like to raise that number (especially by open-coding it).
So let's just remove the the nominal support, and simplify the code.
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17955 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The source code is copied verbatim, with the following two exceptions:
- the UNI files are dropped, together with the corresponding UNI
references in the INF file,
- the INF file receives a new FILE_GUID.
The OVMF DSC and FDF files are at once flipped to the cloned driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17951 6f19259b-4bc3-4df7-8a09-765794883524
|
