summaryrefslogtreecommitdiff
path: root/OvmfPkg
AgeCommit message (Collapse)Author
2014-09-11OvmfPkg: resolve BcfgCommandLib class for ShellPkg/.../Shell.infLaszlo Ersek
SVN r16092 ('ShellPkg: Add a new library for "bcfg" command') introduced a new library class (and an instance for it) called BcfgCommandLib. SVN r16093 ('ShellPkg: Use the new library for "bcfg" command') rebased ShellPkg to the new library, introducing a new [LibraryClasses] dependency. Library classes must be resolved to library instances in client platform descriptions (DSC's). Since OVMF is a client platform, import the same library resolution as seen in "ShellPkg/ShellPkg.dsc" (added in SVN r16092). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16095 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-09OvmfPkg: AcpiTimerLib: Access power mgmt regs based on host bridge typeGabriel Somlo
Pick the appropriate bus:dev.fn for accessing ACPI power management registers (00:01.3 on PIIX4 vs. 00:1f.0 on Q35) based on the device ID of the host bridge (assumed always present at 00:00.0). With this patch, OVMF can boot QEMU's "-machine q35" x86 machine type. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16066 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-29OvmfPkg: QemuVideoDxe: work around misreported QXL framebuffer sizeLaszlo Ersek
When setting up the list of GOP modes offered on QEMU's stdvga ("VGA") and QXL ("qxl-vga") video devices, QemuVideoBochsModeSetup() filters those modes against the available framebuffer size. (Refer to SVN r15288 / git commit ec88061e.) The VBE_DISPI_INDEX_VIDEO_MEMORY_64K register of both stdvga and QXL is supposed to report the size of the drawable, VGA-compatibility framebuffer. Instead, up to and including qemu-2.1, this register actually reports the full video RAM (PCI BAR 0) size. In case of stdvga, this happens to be correct, because on that card the full PCI BAR 0 is usable for drawing; there is no difference between "drawable framebuffer size" and "video RAM (PCI BAR 0) size". However, on the QXL card, only an initial portion of the video RAM is suitable for drawing, as compatibility framebuffer; and the value currently reported by VBE_DISPI_INDEX_VIDEO_MEMORY_64K overshoots the valid size. Beyond the drawable range, the video RAM contains buffers and structures for the QXL guest-host protocol. Luckily, the size of the drawable QXL framebuffer can also be read from a register in the QXL ROM BAR (PCI BAR 2), so let's retrieve it from there. Without this fix, OVMF offers too large resolutions on the QXL card (up to the full size of the video RAM). If a GOP client selects such a resolution and draws into the video RAM past the compatibility segment, then the guest corrupts its communication structures (which is invalid guest behavior). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15978 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-25EDK II Contributions.txt: Note acceptable contribution licensesJordan Justen
We strongly prefer that contribtions be offered using the same license as the project/module. But, we should document other acceptable licenses for contributions. This will allow package owners to more easily know if they can accept a contribution under a different source license. NOTE: This does not modify the wording of the "TianoCore Contribution Agreement 1.0" section Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Mark Doran <mark.doran@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15892 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-18OvmfPkg/ResetVector: Remove pre-built binariesJordan Justen
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15825 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-18OvmfPkg: Build OVMF ResetVector during EDK II build processJordan Justen
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15824 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-18OvmfPkg: Support building OVMF's ResetVector during the EDK II buildJordan Justen
Using NASM we build OVMF's ResetVector as part of the EDK II build process. v2: * Use EDK II extension of .nasmb rather than .nasmbin Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15823 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-13Fix VS2013 build failure.Ruiyu Ni
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15795 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-31OvmfPkg/Csm/CsmSupportLib: fix "missing braces around initializer"Laszlo Ersek
Recent BaseTools changes trigger this gcc warning. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15726 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-28OvmfPkg/build.sh: Support IA32+X64 buildJordan Justen
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15703 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-28OvmfPkg/build.sh: Add support for GCC49 toolchainJordan Justen
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15698 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-22OvmfPkg: build OVMF_VARS.fd, OVMF_CODE.fd, OVMF.fdLaszlo Ersek
OVMF_VARS.fd and OVMF_CODE.fd split the variable store and the firmware code in separate files. The PCDs' values continue to depend only on FD_SIZE_1MB vs. FD_SIZE_2MB. With the split files, it must be ensured on the QEMU command line that OVMF_VARS.fd and OVMF_CODE.fd be contiguously mapped so that they end exactly at 4GB. See QEMU commit 637a5acb (first released in v2.0.0). In this patch we must take care to assign each PCD only once. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15670 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-22OvmfPkg: extract varstore-related FD Layout Regions to an include fileLaszlo Ersek
This saves code duplication between the Ia32, Ia32X64, and X64 flavors, and enables the next patch to include the varstore in new FD files by reference. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15669 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-27OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Fix GCC44 build failure.Gao, Liming
Initialize the input parameter FwhInstance in function GetFvbInstance(). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: "Gao, Liming" <liming.gao@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15601 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-25OvmfPkg: add missing braces to aggregate and/or union initializersLaszlo Ersek
Lack of these braces causes build errors when -Wno-missing-braces is absent. Spelling out more braces also helps understanding the code. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15586 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-19OvmfPkg: AcpiPlatformDxe: don't rely on unstable QEMU interfaceLaszlo Ersek
The fw_cfg file "etc/acpi/tables" is not a stable guest interface -- QEMU could rename it in the future, and/or introduce additional fw_cfg files with ACPI payload. Only the higher-level "etc/table-loader" file is considered stable, which contains a sequence of commands to assist firmware with reading QEMU ACPI tables from the FwCfg interface. Because edk2 provides publishing support for ACPI tables, OVMF only uses the Allocate command to find the names of FwCfg files to read and publish as ACPI tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15574 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-19OvmfPkg: AcpiPlatformDxe: exclude RSD PTR from QEMU's fw_cfg payloadLaszlo Ersek
In one of the next patches we'll start scanning all fw_cfg files that QEMU advertises as carrying ACPI tables, not just "etc/acpi/tables". The RSD PTR table is known to occur in the "etc/acpi/rsdp" fw_cfg file. Since edk2 handles RSD PTR automatically, similarly to RSDT and XSDT, let's exclude RSD PTR too from the manually installed tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15573 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-19OvmfPkg: AcpiPlatformDxe: pass FwCfgFile to InstallQemuLinkedTables()Laszlo Ersek
Split InstallQemuLinkedTables() in two: - the function now takes the name of the fw_cfg file (from which ACPI tables are to be extracted) as a parameter, - the new function InstallAllQemuLinkedTables() calls the former with fw_cfg file names, and cumulatively tracks the ACPI tables installed by all invocations of the former. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15572 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-19OvmgPkg: QemuFwCfgLib: export QEMU_FW_CFG_FNAME_SIZELaszlo Ersek
Names of firmware configuration files always take 56 bytes (including at least one terminating NUL byte). Expose this constant to all consumers of QemuFwCfgLib because further interfaces may depend on it. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15571 6f19259b-4bc3-4df7-8a09-765794883524
2014-05-20OvmfPkg/SMBIOS: Add QEMU support to OVMF SMBIOS driverGabriel Somlo
Locate QEMU SMBIOS data in fw_cfg and install it via the SMBIOS protocol. Starting with qemu-2.1, on pc/x86 machines of type >= 2.1, full SMBIOS tables are generated and inserted into fw_cfg (i.e., no per-field patching of locally generated structures is required). Aside from new code to extract a SMBIOS blob from fw_cfg, this patch utilizes the pre-existing infrastructure (already used by Xen) to handle final SMBIOS table creation. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15542 6f19259b-4bc3-4df7-8a09-765794883524
2014-05-20OvmfPkg/SMBIOS: Reuse handles supplied by underlying VMGabriel Somlo
The SMBIOS specification requires some structure types to contain reference fields to other structures' handles. When InstallAllStructures() rebuilds the SMBIOS tables by traversing an existing source table, the use of SMBIOS_HANDLE_PI_RESERVED causes automatically generated, arbitrary handle numbers to be assigned to each cloned structure. This causes all reference handle fields to become invalid. This patch modifies InstallAllStructures() to reuse the original handle numbers supplied by the underlying VM, preserving the correctness of any included handle references. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Anthony PERARD <anthony.perard@citrix.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15541 6f19259b-4bc3-4df7-8a09-765794883524
2014-05-20OvmfPkg: QemuVideoDxe: Int10h stub for Windows 7 & 2008 (stdvga, QXL)Laszlo Ersek
The Windows 2008 R2 SP1 (and Windows 7) UEFI guest's default video driver dereferences the real mode Int10h vector, loads the pointed-to handler code, and executes what it thinks to be VGA BIOS services in an internal real-mode emulator. Consequently, video mode switching doesn't work in Windows 2008 R2 SP1 when it runs on the pure UEFI build of OVMF, making the guest uninstallable. This patch adds a VGABIOS "shim" to QemuVideoDxe. For the first stdvga or QXL card bound, an extremely stripped down VGABIOS imitation is installed in the C segment. It provides a real implementation for the few services that are in fact necessary for the win2k8r2sp1 UEFI guest, plus some fakes that the guest invokes but whose effect is not important. The C segment is not present in the UEFI memory map prepared by OVMF. We never add memory space that would cover it (either in PEI, in the form of memory resource descriptor HOBs, or in DXE, via gDS->AddMemorySpace()). This way the handler body is invisible to all non-buggy UEFI guests, and the rest of edk2. The Int10h real-mode IVT entry is covered with a Boot Services Code page, making that too unaccessible to the rest of edk2. (Thus UEFI guest OSes different from the Windows 2008 family can reclaim the page. The Windows 2008 family accesses the page at zero regardless of the allocation type.) The patch is the result of collaboration: Initial proof of concept IVT entry installation and handler skeleton (in NASM) by Jordan Justen. Service tracing and implementation, data collection/analysis, and C coding by yours truly. Last minute changes by Gerd Hoffmann: - Use OEM mode number (0xf1) instead of standard 800x600 mode (0x143). The resolution of the OEM mode (0xf1) is not standardized; the guest can't expect anything from it in advance. - Use 1024x768 rather than 800x600 for more convenience in the Windows 2008 R2 SP1 guest during OS installation, and after normal boot until the QXL XDDM guest driver is installed. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15540 6f19259b-4bc3-4df7-8a09-765794883524
2014-04-05OvmfPkg: PlatformPei: protect SEC's GUIDed section handler table thru S3Laszlo Ersek
OVMF's SecMain is unique in the sense that it links against the following two libraries *in combination*: - IntelFrameworkModulePkg/Library/LzmaCustomDecompressLib/ LzmaCustomDecompressLib.inf - MdePkg/Library/BaseExtractGuidedSectionLib/ BaseExtractGuidedSectionLib.inf The ExtractGuidedSectionLib library class allows decompressor modules to register themselves (keyed by GUID) with it, and it allows clients to decompress file sections with a registered decompressor module that matches the section's GUID. BaseExtractGuidedSectionLib is a library instance (of type BASE) for this library class. It has no constructor function. LzmaCustomDecompressLib is a compatible decompressor module (of type BASE). Its section type GUID is gLzmaCustomDecompressGuid == EE4E5898-3914-4259-9D6E-DC7BD79403CF When OVMF's SecMain module starts, the LzmaCustomDecompressLib constructor function is executed, which registers its LZMA decompressor with the above GUID, by calling into BaseExtractGuidedSectionLib: LzmaDecompressLibConstructor() [GuidedSectionExtraction.c] ExtractGuidedSectionRegisterHandlers() [BaseExtractGuidedSectionLib.c] GetExtractGuidedSectionHandlerInfo() PcdGet64 (PcdGuidedExtractHandlerTableAddress) -- NOTE THIS Later, during a normal (non-S3) boot, SecMain utilizes this decompressor to get information about, and to decompress, sections of the OVMF firmware image: SecCoreStartupWithStack() [OvmfPkg/Sec/SecMain.c] SecStartupPhase2() FindAndReportEntryPoints() FindPeiCoreImageBase() DecompressMemFvs() ExtractGuidedSectionGetInfo() [BaseExtractGuidedSectionLib.c] ExtractGuidedSectionDecode() [BaseExtractGuidedSectionLib.c] Notably, only the extraction depends on full-config-boot; the registration of LzmaCustomDecompressLib occurs unconditionally in the SecMain EFI binary, triggered by the library constructor function. This is where the bug happens. BaseExtractGuidedSectionLib maintains the table of GUIDed decompressors (section handlers) at a fixed memory location; selected by PcdGuidedExtractHandlerTableAddress (declared in MdePkg.dec). The default value of this PCD is 0x1000000 (16 MB). This causes SecMain to corrupt guest OS memory during S3, leading to random crashes. Compare the following two memory dumps, the first taken right before suspending, the second taken right after resuming a RHEL-7 guest: crash> rd -8 -p 1000000 0x50 1000000: c0 00 08 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ 1000010: d0 33 0c 00 00 c9 ff ff c0 10 00 01 00 88 ff ff .3.............. 1000020: 0a 6d 57 32 0f 00 00 00 38 00 00 01 00 88 ff ff .mW2....8....... 1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo 1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so......... vs. crash> rd -8 -p 1000000 0x50 1000000: 45 47 53 49 01 00 00 00 20 00 00 01 00 00 00 00 EGSI.... ....... 1000010: 20 01 00 01 00 00 00 00 a0 01 00 01 00 00 00 00 ............... 1000020: 98 58 4e ee 14 39 59 42 9d 6e dc 7b d7 94 03 cf .XN..9YB.n.{.... 1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo 1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so......... The "EGSI" signature corresponds to EXTRACT_HANDLER_INFO_SIGNATURE declared in MdePkg/Library/BaseExtractGuidedSectionLib/BaseExtractGuidedSectionLib.c. Additionally, the gLzmaCustomDecompressGuid (quoted above) is visible at guest-phys offset 0x1000020. Fix the problem as follows: - Carve out 4KB from the 36KB gap that we currently have between PcdOvmfLockBoxStorageBase + PcdOvmfLockBoxStorageSize == 8220 KB and PcdOvmfSecPeiTempRamBase == 8256 KB. - Point PcdGuidedExtractHandlerTableAddress to 8220 KB (0x00807000). - Cover the area with an EfiACPIMemoryNVS type memalloc HOB, if S3 is supported and we're not currently resuming. The 4KB size that we pick is an upper estimate for BaseExtractGuidedSectionLib's internal storage size. The latter is calculated as follows (see GetExtractGuidedSectionHandlerInfo()): sizeof(EXTRACT_GUIDED_SECTION_HANDLER_INFO) + // 32 PcdMaximumGuidedExtractHandler * ( sizeof(GUID) + // 16 sizeof(EXTRACT_GUIDED_SECTION_DECODE_HANDLER) + // 8 sizeof(EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER) // 8 ) OVMF sets PcdMaximumGuidedExtractHandler to 16 decimal (which is the MdePkg default too), yielding 32 + 16 * (16 + 8 + 8) == 544 bytes. Regarding the lifecycle of the new area: (a) when and how it is initialized after first boot of the VM The library linked into SecMain finds that the area lacks the signature. It initializes the signature, plus the rest of the structure. This is independent of S3 support. Consumption of the area is also limited to SEC (but consumption does depend on full-config-boot). (b) how it is protected from memory allocations during DXE It is not, in the general case; and we don't need to. Nothing else links against BaseExtractGuidedSectionLib; it's OK if DXE overwrites the area. (c) how it is protected from the OS When S3 is enabled, we cover it with AcpiNVS in InitializeRamRegions(). When S3 is not supported, the range is not protected. (d) how it is accessed on the S3 resume path Examined by the library linked into SecMain. Registrations update the table in-place (based on GUID matches). (e) how it is accessed on the warm reset path If S3 is enabled, then the OS won't damage the table (due to (c)), hence see (d). If S3 is unsupported, then the OS may or may not overwrite the signature. (It likely will.) This is identical to the pre-patch status. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15433 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-31OvmfPkg: add a catch-all match for PCI devices in the OpenFirmware pathPaolo Bonzini
In many cases, the second node in /pci@i0cf8/XYZ@DD,FF node is enough to match a UEFI device path; a typical cases is a NIC that is assigned from the host to the guest. Add a catch-all case for PCI devices, and reuse it for NICs since it works well for those too. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15422 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-31OvmfPkg: non-null PcdLib instance for the CSM VideoDxePaolo Bonzini
VideoDxe is a UEFI_DRIVER, so it has by default a null instance of PcdLib. It accesses two PCDs that are now dynamic (gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution and gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution). Similar to r15362 (OvmfPkg: non-null PcdLib instance for GraphicsConsoleDxe, 2014-03-22), we need to specify a non-null instance of PcdLib. This patch unbreaks the CSM VideoDxe module for OvmfPkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15421 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-31OvmfPkg: AcpiPlatformDxe: download ACPI tables from QEMULaszlo Ersek
Recent qemu versions compose all ACPI tables on the host side, according to the target hardware configuration, and make the tables available to any guest firmware over fw_cfg. See version compatibility information below. The feature moves the burden of keeping ACPI tables up-to-date from boot firmware to qemu (which is the source of hardware configuration anyway). This patch adds client code for this feature. Benefits of the qemu-provided ACPI tables include PCI hotplug for example. Qemu provides the following three fw_cfg files: - etc/acpi/rsdp - etc/acpi/tables - etc/table-loader "etc/acpi/rsdp" and "etc/acpi/tables" are similar, they are only kept separate because they have different allocation requirements in SeaBIOS. Both of these fw_cfg files contain preformatted ACPI payload. "etc/acpi/rsdp" contains only the RSDP table, while "etc/acpi/tables" contains all other tables, concatenated. The tables in these two fw_cfg files are filled in by qemu, but two kinds of fields are left incomplete in each table: pointers to other tables, and checksums (which depend on the pointers). Qemu initializes each pointer with a relative offset into the fw_cfg file that contains the pointed-to ACPI table. The final pointer values depend on where the fw_cfg files, holding the pointed-to ACPI tables, will be placed in memory by the guest. That is, the pointer fields need to be "relocated" (incremented) by the base addresses of where "/etc/acpi/rsdp" and "/etc/acpi/tables" will be placed in guest memory. This is where the third file, "/etc/table-loader" comes in the picture. It is a linker/loader script that has several command types: One command type instructs the guest to download the other two files. Another command type instructs the guest to increment ("absolutize") a pointer field (having a relative initial value) in the pointing ACPI table, present in some fw_cfg file, with the dynamic base address of the same (or another) fw_cfg file, holding the pointed-to ACPI table. The third command type instructs the guest to compute checksums over ranges and to store them. In edk2, EFI_ACPI_TABLE_PROTOCOL knows about table relationships -- it handles linkage automatically when a table is installed. The protocol takes care of checksumming too. RSDP is installed automatically. Hence we only need to care about the "etc/acpi/tables" fw_cfg file, determining the boundaries of each ACPI table inside it, and installing those tables. Qemu compatibility information: --------------+---------------------+------------------------------------- qemu version | qemu machine type | effects of the patch --------------+---------------------+------------------------------------- up to 1.6.x | any pc-i440fx | None. OVMF's built-in ACPI tables | | are used. --------------+---------------------+------------------------------------- any | up to pc-i440fx-1.6 | None. OVMF's built-in ACPI tables | | are used. --------------+---------------------+------------------------------------- 1.7.0 | pc-i440fx-1.7 | Potential guest OS crash, dependent | (default for 1.7.0) | on guest RAM size. | | | | DO NOT RUN OVMF on the (1.7.0, | | pc-i440fx-1.7) qemu / machine type | | combination. --------------+---------------------+------------------------------------- 1.7.1 | pc-i440fx-1.7 | OVMF downloads valid ACPI tables | (default for 1.7.1) | from qemu and passes them to the | | guest OS. --------------+---------------------+------------------------------------- 2.0.0-rc0 | pc-i440fx-1.7 or | OVMF downloads valid ACPI tables | later | from qemu and passes them to the | | guest OS. -------------+---------------------+------------------------------------- Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15420 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-31OvmfPkg: AcpiS3SaveDxe: do not load if S3 is unsupported/disabled in qemuLaszlo Ersek
The previous patch ensures that the LockBox is protected during DXE (but the OS can still drop it) if S3 is unsupported or disabled. However, S3 related drivers not only save data in the lockbox, they allocate objects with Reserved and AcpiNVS memory types too, which the OS can't (must not) release. This is a waste when S3 is unsupported or disabled. In OVMF a good "choke point" for these drivers is the entry point of AcpiS3SaveDxe. The messages of the following commits are relevant to the data and control flow: - SVN r15290 (git commit 8f5ca05b) - SVN r15305 (git commit 5a217a06) - SVN r15306 (git commit d4ba06df) Prevent AcpiS3SaveDxe from loading when S3 is unsupported or disabled. This should keep away (most of the) dependent drivers too. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Matt Fleming <matt.fleming@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15419 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-31OvmfPkg: PlatformPei: lifecycle fixes for the LockBox areaLaszlo Ersek
If (mBootMode == BOOT_ON_S3_RESUME) -- that is, we are resuming --, then the patch has no observable effect. If (mBootMode != BOOT_ON_S3_RESUME && mS3Supported) -- that is, we are booting or rebooting, and S3 is supported), then the patch has no observable effect either. If (mBootMode != BOOT_ON_S3_RESUME && !mS3Supported) -- that is, we are booting or rebooting, and S3 is unsupported), then the patch effects the following two fixes: - The LockBox storage is reserved from DXE (but not the OS). Drivers in DXE may save data in the LockBox regardless of S3 support, potentially corrupting any overlapping allocations. Make sure there's no overlap. - The LockBox storage is cleared. A LockBox inherited across a non-resume reboot, populated with well-known GUIDs, breaks drivers that want to save entries with those GUIDs. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Matt Fleming <matt.fleming@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15418 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: connect RouteConfig() to platform dataLaszlo Ersek
Establish the full stack of conversions when modifying the platform configuration: ConfigResp -- form engine / HII communication | [ConfigToBlock] | v MAIN_FORM_STATE -- binary representation of form/widget state | [FormStateToPlatformConfig] | v PLATFORM_CONFIG -- accessible to DXE and UEFI drivers | [PlatformConfigSave] | v UEFI non-volatile variable -- accessible to external utilities Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15375 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: connect ExtractConfig() to platform dataLaszlo Ersek
Establish the full stack of conversions in retrieving the platform configuration: MultiConfigAltResp -- form engine / HII communication ^ | [BlockToConfig] | MAIN_FORM_STATE -- binary representation of form/widget state ^ | [PlatformConfigToFormState] | PLATFORM_CONFIG -- accessible to DXE and UEFI drivers ^ | [PlatformConfigLoad] | UEFI non-volatile variable -- accessible to external utilities Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15374 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: add save and discard buttons to the formLaszlo Ersek
The RouteConfig() function is also called now as expected. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15373 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: get available resolutions from GOPLaszlo Ersek
Generate the options for the drop-down list from the GOP resolutions. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15372 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: QemuVideoDxe: serialize Start() against callbacksLaszlo Ersek
If Start() succeeds, the callback is only executed when the setup is complete (on the stack of RestoreTPL()), rather than on the stack of InstallMultipleProtocolInterfaces(), when the driver setup may yet be theoretically incomplete. If Start() fails, the protocol interface will have been uninstalled (rolled back) by the time the callback runs (again, on the stack of RestoreTPL()). Since protocol notification callbacks begin with locating the protocol interface in question, such attempts to locate will fail immediately and save some work in the callback. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15371 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg/PlatformDxe: Silence warning seen with GCC48 IA32Jordan Justen
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15370 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: add form widgets for video modesLaszlo Ersek
In this patch we populate the form with the two widgets related to video resolution: - A read-only string field displaying the preference for the next boot. - A drop-down list offering choices for changing the setting. This list is implemented with dynamically generated IFR opcodes. (In general, the current preference may be missing, or it may be invalid for the available video RAM size. The list of possible new settings is filtered with the video RAM size.) Because the form now becomes able to receive input, we must also implement ExtractConfig(). This function tells the HII engine about the state of the widgets. For now we set up both widgets with static data only: - The current preference always says "Unset". The driver code is still isolated from the backend (the UEFI variable store). - The list of possible resolutions offers 800x600 only. We don't interrogate the GOP yet. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15369 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: introduce state for the main formLaszlo Ersek
We'll need a C language (ie. structure) representation for the state of the visual elements on the form. We choose the Buffer Storage kind (see 29.2.5.6 "Storage" in UEFI 2.4A), because it's easy to work with. Note that the structure added in this patch has nothing to do with UEFI non-volatile variables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15368 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: add an empty HII formLaszlo Ersek
... which opens from the Device Manager window. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15367 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: set preferred video resolution from platform configLaszlo Ersek
The GraphicsConsoleDxe driver (in MdeModulePkg/Universal/Console) determines the preferred video resolution from the dynamic PCDs - gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution - gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution Setting the graphics resolution during boot is useful when the guest OS (for lack of a dedicated display driver) continues to work with the original GOP resolution and framebuffer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15366 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: PlatformDxe: utility functions for saving / loading configurationLaszlo Ersek
The two functions introduced here allow the saving and loading of platform configuration to/from the non-volatile variable store. The PLATFORM_CONFIG structure and the two functions that take it / return it are generally meant for any DXE or UEFI driver that needs to access platform configuration. For now we keep this small "library" internal to PlatformDxe. The PLATFORM_CONFIG wire format is intended only to grow over time (as long as the variable GUID remains unchanged). At the introduction of new fields, new feature flags must be added, and recognized in PlatformConfigLoad(). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15365 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: introduce empty PlatformDxeLaszlo Ersek
This DXE driver will load/save persistent values for OVMF's config knobs, plus expose those knobs via HII. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15364 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: introduce gOvmfPlatformConfigGuidLaszlo Ersek
This GUID should become a new "namespace" for UEFI variables that are specific to OVMF configuration (as opposed to standard UEFI global variables). We'll also use it as the GUID of the related HII form-set (ie. the interactive user interface). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15363 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-22OvmfPkg: non-null PcdLib instance for GraphicsConsoleDxeLaszlo Ersek
GraphicsConsoleDxe (a UEFI_DRIVER under MdeModulePkg/Universal/Console) determines the preferred video resolution from the dynamic PCDs - gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution - gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution In one of the next patches, we'd like to change these PCDs. In order for GraphicsConsoleDxe to retrieve the new values dynamically, - it must be linked with the non-null instance of PcdLib, - OvmfPkg must provide dynamic defaults. We keep MdeModulePkg's 800x600 default resolution. (The UEFI specification requires video drivers to support 800x600.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15362 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-13OvmfPkg: BDS: QemuBootOrder: don't leak unreferenced boot optionsLaszlo Ersek
The Boot#### variables that have become unreferenced in the new BootOrder variable won't ever be automatically reused for booting. They are "unreachable" resources that take up room in the variable store. Make an effort to remove them. This should plug the leak which, given sufficient reboots, exhausts the variable store with stale Boot#### variables and renders the VM unbootable. Reported-by: Michael Chang <mchang@suse.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15327 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-13OvmfPkg: BDS: remove historic (now defunct) boot mode hackLaszlo Ersek
When PI can distinguish the "full config" boot mode from "assume no changes", then the following BDS logic is correct: if BootMode == BOOT_WITH_FULL_CONFIGURATION: // // connect all devices // create & append each default boot option that's missing // BdsLibConnectAll BdsLibEnumerateAllBootOption else if BootMode == BOOT_ASSUMING_NO_CONFIGURATION_CHANGES: // // just stick with current BootOrder and the Boot#### variables // referenced by it // In theory, the first branch is intended to run infrequently, and the "assume no changes" branch should run most of the time. However, some platforms can't tell these two boot modes apart. The following substitute had been introduced: // // Technically, always assume "full config", but the BootMode HOB is // actually meaningless wrt. to "full config" or "assume no changes". // ASSERT (BootMode == BOOT_WITH_FULL_CONFIGURATION); // // Key off the existence of BootOrder. Try to prepare an in-memory list // of boot options, based on BootOrder and the referenced Boot#### // variables. // Status = BdsLibBuildOptionFromVar() // // If that succeeded, we'll treat it as "assume no changes". If it // failed (*only* if it failed), we'll build default boot options, // calling it "full config": // if EFI_ERROR(Status): BdsLibConnectAll() BdsLibEnumerateAllBootOption(BootOptionList) What we have now in OVMF is a mixture of the hack, and the behavior that's theoretically correct for "full config": - We assert "full config" -- this is OK. - We call "connect all" and "enumerate all" deliberately -- this is OK too. It matches "full config" which we assert. - However, we also have the hack in place, which had been meant as an alternative. In order to clean this up, we either need to restore the hack to its original form (ie. comment out the unconditional calls again), or we ought to remove the hack altogether. The unconditional "connect all" + "enumerate all" calls are the correct approach for OVMF, because we want, in fact, to start with "full config". The QEMU boot order specification and the set of emulated devices might change "out of band", which excludes "assume no changes". In other words, removing the hack corresponds to the "real production" case that the comment hints at. Because SetBootOrderFromQemu() may change the BootOrder NvVar, we must preserve the BdsLibBuildOptionFromVar() function call, in order to refresh the in-memory list with the new boot priorities. (The last step of BdsLibEnumerateAllBootOption() is such a call too.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15326 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-05OvmfPkg: raise DXEFV size to 8 MBLaszlo Ersek
This fixes build errors like: GenFds.py... the required fv image size 0x71b118 exceeds the set fv image size 0x700000 which is reported at least for: (a) -b DEBUG -D SECURE_BOOT_ENABLE -t GCC44, (b) -b DEBUG -D SECURE_BOOT_ENABLE -t GCC48 -D CSM_ENABLE Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15309 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04OvmfPkg: Add DebugAgentLib for Library class mapping for DXE_DRIVERJordan Justen
This is needed for BootScriptExecutorDxe. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15308 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04OvmfPkg: S3 Resume: pull in BootScriptExecutorDxeLaszlo Ersek
This driver (from "MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf") is first loaded normally during DXE. When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely as a form of notification), the driver reloads itself to reserved memory. During S3 Resume / PEI, the driver image is executed from there. In order to access the boot script saved during S3 Suspend, LockBox access is needed. The boot script is transferred internal to PiDxeS3BootScriptLib: Both S3SaveStateDxe and BootScriptExecutorDxe are statically linked against PiDxeS3BootScriptLib. Whichever is loaded first (during normal boot, in the DXE phase), allocates the root storage for the script. The address is then passed between the PiDxeS3BootScriptLib instances living in the two separate drivers thru the dynamic PcdS3BootScriptTablePrivateDataPtr PCD. Dependencies: BootScriptExecutorDxe gEfiLockBoxProtocolGuid [OvmfPkg/AcpiS3SaveDxe] S3BootScriptLib [PiDxeS3BootScriptLib] SmbusLib [BaseSmbusLibNull] LockBoxLib [OvmfPkg/Library/LockBoxLib] LockBoxLib [OvmfPkg/Library/LockBoxLib] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15307 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04OvmfPkg: S3 Resume: fake LockBox protocol for BootScriptExecutorDxeLaszlo Ersek
BootScriptExecutorDxe, to be pulled in in the next patch, was written with the SMM implementation of LockBox in mind. That implementation is split in the following three parts: - client side (DXE/PEI) library, - SMM driver producing gEfiLockBoxProtocolGuid, - driver side (SMM) library. BootScriptExecutorDxe includes the client side LockBoxLib. So that the library can communicate with the SMM LockBox driver, BootScriptExecutorDxe has a Depex on gEfiLockBoxProtocolGuid, normally installed by the SMM LockBox driver. This is actually not a hard dependency, it just ensures correct load order between BootScriptExecutorDxe and MdeModulePkg/Universal/LockBox/SmmLockBox. The (client side) LockBox library instance in OVMF doesn't depend on a separate driver that produces gEfiLockBoxProtocolGuid. Nothing produces that GUID right now in OVMF. This prevents BootScriptExecutorDxe from loading. Install gEfiLockBoxProtocolGuid in our only S3-specific, custom DXE driver, in order to enable loading of BootScriptExecutorDxe. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15306 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04OvmfPkg: S3 Suspend: save boot script after ACPI contextLaszlo Ersek
The trigger to actually save the boot script is the installation of EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL, to be performed by any DXE driver. Installation of the protocol also locks down SMM (as its name indicates) and (in theory) prevents further LockBox access. We cannot install this protocol before BdsLibBootViaBootOption() is called (eg. in OVMF's PlatformBdsPolicyBehavior()), because BdsLibBootViaBootOption() calls EFI_ACPI_S3_SAVE_PROTOCOL.S3Save(), which needs LockBox access. We also can't install the protocol after BdsLibBootViaBootOption() returns, simply because control is never returned to us. Therefore modify our EFI_ACPI_S3_SAVE_PROTOCOL implementation so that the boot script is prepared and installed internally to S3Save(). (The boot script must contain at least one opcode, otherwise S3BootScriptLib runs into an assertion failure. We add a harmless (no-op) "information" opcode.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15305 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04OvmfPkg: S3 Suspend: enable creation/saving of an S3 Boot ScriptLaszlo Ersek
"MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf" produces the EFI_S3_SAVE_STATE_PROTOCOL which allows creation and saving of an S3 Boot Script, to be replayed in PEI during S3 Resume. The script contains opcodes and opcode arguments to configure CPU, PCI and IO resources. S3SaveStateDxe relies on the S3BootScriptLib library. The Null implementation is not useful for actually saving the boot script, we need the PiDxeS3BootScriptLib instance. The PiDxeS3BootScriptLib library instance depends on LockBoxLib, implemented for OVMF in one of the previous patches. PiDxeS3BootScriptLib also depends on SmbusLib. For now we opt for the Null instance of the latter. It means that SMBus commands in the boot script will have no effect when interpreted during S3 Resume. This should be fine for OvmfPkg and QEMU. EFI_S3_SAVE_STATE_PROTOCOL [S3SaveStateDxe] S3BootScriptLib [PiDxeS3BootScriptLib] SmbusLib [BaseSmbusLibNull] LockBoxLib [OvmfPkg/Library/LockBoxLib] When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely as a form of notification), the S3SaveStateDxe driver saves the boot script to EfiACPIMemoryNVS, and links it into the LockBox. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15304 6f19259b-4bc3-4df7-8a09-765794883524