Age | Commit message (Collapse) | Author |
|
This patch applies necessary modifications, which allow to use
MvSpiFlash driver in variable support as a runtime service.
Its type is modified to DXE_RUNTIME_DRIVER, as well as
an event is created, which converts the pointers to the
SpiMasterProtocol and its routines. In order to ensure proper
execution of the MvFvbDxe driver, configure initialization
order with Depex entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
MvFvbDxe driver introduces non-volatile EFI variable support
for Armada platforms. It relies on memory-mapped SPI read access.
Implementation of EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL
is done with using existing Marvell SPI infrastructure
(SpiMasterProtocol and SpiFlashProtocol), thanks to which
this driver will be able to support various combinations of
flash devices and host controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Hitherto mechanism of fixing SPI flash model in the PCDs,
occured to be very inefficient and problematic. Enable
dynamic detection by reworking MvSpiFlashReadId() command,
which now uses newly added NorFlashInfoLib, that helps to
obtain description of the JEDEC compliant devices.
This patch updates the MvSpiFlashProtocol ReadId() protocol
callback on both producer's (MvFlashDxe) and consumers' sides
(FirmwareUpdate and SpiTool applications). Because all
information about detected SPI NOR flash is now stored in
the obtained NorFlashInfo structure fields, use them instead
of the PCDs.
Enable compilation of the NorFlashInfoLib and update
PortingGuide documentation accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Fix the ReadId routine by using master's ReadWrite callback
instead of the raw Transfer - no longer swapping and byte
shifting is needed. Simplify code by using local array
instead of dynamic allocation. Moreover store the FlashId
in an UINT8 array PCD instead of the concatenated UINT32
format - this way less overhead in the driver is needed
for comparing the buffers.
The new handling allowed for cleaning Fupdate and Sf
shell commands FlashProbe routines.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The default MemoryInitPeiLib implementation insists on reserving the
region occupied by our own FV, while this is not necessary at all (the
compressed payload is uncompressed elsewhere, so the moment we enter
DXE core, we don't care about the FV contents in memory)
So clone MemoryInitPeiLib and modify it to suit our needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The Armada 70x0/80x0 DRAM controller allows a single window of DRAM
to be remapped to another location in the physical address space.
Since DRAM starts at address 0, and normally exceeds 4GB on these
systems, this allows us to free up some memory in the 32-bit
addressable region for peripheral MMIO and PCI MMIO32 and CONFIG
spaces.
This patch adjusts memory blocks to the configuration done in ARM-TF.
The remap parameters are otained directly from the registers. Moreover,
the configuration space base address is now configurable via PCD, so
that to satisfy a case, when remap is not enabled in the early firmware
and ensure, that PcdSystemMemorySize is not overlapping it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
When switching to generic PSCI reset library, obsolete parts
of previous custom reset library (PCDs, documentation) remained.
Remove them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add an implementation of EFI_RNG_PROTOCOL so that the OS loader has
access to entropy for KASLR and other purposes (i.e., seeding the OS's
entropy pool very early on).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to enable modification of dynamic PCD's for the libraries
and DXE drivers, this patch introduces new driver. It is
executed prior to other drivers. Mpp, ComPhy and Utmi libraries
initialization were moved from PrePi stage to DXE.
To force the correct driver dispatch sequence, introduce a protocol GUID
and install the protocol as a NULL protocol when PlatInitDxe executes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
[Introduce protocol GUID to force correct driver dispatch order]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Hitherto PHY handling in Pp2Dxe was not flexible. It allowed for using
only single MDIO controller, which may not be true on Armada 80x0 SoCs.
For this purpose introduce the MDIO description, using the new structures
and template in MvHwDescLib. This change enables addition of multiple
CP110 hardware blocks with MDIO controllers.
This change required different PHY handling and obtaining data over
desired MDIO bus. Now given Pp2 port is matched with the PHY via
its index in gMarvellTokenSpaceGuid.PcdPhyDeviceIds. The PHY itself
is mapped to the MDIO controller, using
gMarvellTokenSpaceGuid.PcdPhy2MdioController. Also obtaining
SMI addresses was moved to the PHY initialization routine.
All above allow for much cleaner and logical PHY description
in the .dsc file, which now uses macros for connection type
and speed.
Update PortingGuide documentation accordingly and Armada 70x0 DB
NIC/PHY description.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch introduces UTMI description, using the new structures
and template in MvHwDescLib. This change enables more flexible
addition of multiple CP with UTMI PHY's and also significantly
reduces amount of used PCD's for that purpose. Update PortingGuide
documentation accordingly.
This patch replaces string-based description of Utmi on
Armada 70x0 DB with new, reduced format, which uses macros
in Armada.dsc.inc file for better readability.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch introduces I2c description, using the new structures
and template in MvHwDescLib. This change enables more flexible
addition of multiple I2c controllers and also allows for
removal of string PCD parsing. Update Armada 70x0 DB description
and PortingGuide accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Although, hitherto support allowed for using configurable EraseSize,
the erase command was fixed to CMD_ERASE_64K. Also it was
assumed that EraseSize equals SectorSize, which is not true
for some flash devices. Fix both issues by adding new PCD
(gMarvellTokenSpaceGuid.PcdSpiFlashPageSize) and using
this parameter properly in MvSpiFlashUpdate routine instead
of the EraseSize. Also erase command is adjusted to the settings.
Update PortingGuide accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Until now transfer SCLK mode and CS were fixed, when using
shell 'sf' command. This patch enables their configuration.
Update porting guide accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
After Pp2Dxe data migrated to MvHwDescLib, both controllers
could be used, but not at the same time. It was caused by
ports' insufficient description. This patch fixes this problem by
introducing new PCD responsible for the mapping between port and
its controller. Also it was possible to remove redundant
PcdPp2NumPorts. Update documentation accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
This patch introduces Pp2Dxe description, using the new structures
and template in MvHwDescLib. This change enables more flexible
addition of multiple Pp2Dxe controllers. For that purpose, static global
variables (BufferLocation and Mvpp2Shared) had to be replaced by
dynamically allocated resources. PortingGuide is updated accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Registers' offset are constant for each PP2 controller instance,
so use macros with relative addresses for their description.
This allowed to remove 5 PCD's and will ease enabling second
controller on Armada8k. Update PortingGuide accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Import Armada 70x0 suppport from OpenPlatformPkg,
together with its documentation and utilities.
Imported from commit efd798c1eb of
https://git.linaro.org/uefi/OpenPlatformPkg.git
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
|