| Age | Commit message (Collapse) | Author |
|---|
|
This adds SMBIOS tables to the DeveloperBox platform describing the
BIOS, system, enclosure, CPUs, caches, PCIe slots and system memory,
which almost amounts to the mandatory minimum as given by the SMBIOS
spec. Only the type 17 structures currently lack detailed information
about the DIMMs: the SPDs are on a I2C bus that is only accessible by
the SCP, and it currently does not share this information.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Expose a separate ACPI description of the SynQuacer eMMC controller
when both ACPI and eMMC support have been enabled in the HII menu.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
|
|
Add the ACPI tables describing various parts of the SynQuacer SoC and
its peripherals, and the drivers to expose them to the EvalBoard and
DeveloperBox platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
|
|
The Designware PCIe IP in the SynQuacer SoC needs a little help to
appear sane to the OS. Not only does it lack a true root port, and
therefore does not perform any filtering whatsoever of type 0 config
TLPs that are not intended for the link peer, it also has trouble
issuing 64-bit wide MMIO accesses, which are often used on MMIO BARs
with memory semantics (e.g., frame buffers).
So let's create a stage 2 mapping covering the entire physical address
space, and remap some ECAM regions and demote write combine attributes
to device/strongly ordered. This is not a water tight fix, but it does
work around the issues in the majority of cases.
(Note that the ECAM remapping can also be addressed in the SMMU mapping
of the PCIe IP exposed to the CPU, but this is currently under
development, and it does not hurt to have it in two places)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Commit 4bf95a9f361e ("MdeModulePkg/ResetSystemRuntimeDxe: Add more
debug message") broke the DEBUG build for all platforms that rely on
MMIO mapped UART devices, since it introduces a DEBUG() print that
may trigger at runtime, at which such UART devices are usually not
mapped, resulting in an OS crash.
Given that this mostly only affects ARM and AARCH64, it is not unlikely
that similar inadvertent breakage will occur again in the future, so
let's fix this once and for all by switching affected platforms to the
new DxeRuntimeDebugLibSerialPort DebugLib implementation that takes care
not to touch the UART hardware after ExitBootServices().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the various drivers for the 96Boards LS connector and the
optional Secure96 mezzanine board.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
edk2 commit 1ec2e7d0e8db
("MdeModulePkg/DxeCapsuleLibFmp: Use BmpSupportLib") broke the build of
all platforms that include DxeCapsuleLibFmp, since none of them included
a BmpSupportLib (added as part of the same series).
BmpSupportLib itself depends on SafeIntLib, so add the two libraries to
all affected platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Implement support for the SynQuacer eMMC controller. This involves an
implementation of the SD/MMC override protocol to handle a couple of
quirks that would otherwise prevent this IP from being driven by the
generic SDHCI driver.
Also, add a HII page to the PlatformDxe driver that allows eMMC support
to be enabled, and wire it up for both DeveloperBox and EVB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers that make the serial and graphical console behave more
intuitively.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the RamDiskDxe driver, which is required for HTTP booting .iso
images.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add menu options to the SynQuacer Platform menu screen to limit the
maximum PCIe link speed for each slot individually. This may be useful
to work around potential PCIe issues.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The EVB does not boot if PCI RC #0 has no card inserted, and will hang in
the PCIe initialization code. So let's check the presence detect GPIO,
and only enable PCI RC #0 if it is asserted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
If a PCIe RC is not enabled (due to the fact that the slot is not
populated), set its DT node 'status' property to 'disabled' so that
the OS will not attempt to attach to it.
This means we will need to switch from the default DtPlatformDtbLoaderLib
to a special one for our platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Expose the contents of the .DSC macro BUILD_NUMBER via the
PCD gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString (if > 1),
and as the FMP system firmware version (for capsule update).
Also, set the firmware vendor PCD to the contents of the macro
FIRMWARE_VENDOR so that we can set its value at build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
As it turns out, it is surprisingly easy to configure both the NETSEC
and eMMC devices as cache coherent for DMA, given that they are both
behind the same SMMU which is already configured in passthrough mode
by the firmware running on the SCP.
So update the static SMMU configuration to make memory accesses performed
by these devices inner shareable inner/outer writeback cacheable, which
makes them cache coherent with the CPUs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers, library resolutions and PCD settings to enable RTC
support on DeveloperBox. Also, update PlatformDxe to register the
non-discoverable device handles for both I2C controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Ordinary computers typically have a physical switch or jumper on the
board that allows non-volatile settings to be cleared. Let's implement
the same using DIP switch #1 on block #3, and clear the EFI variable
store if it is set to ON at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to improve the 'out of the box' experience when booting
this system with a monitor and keyboard attached, include the serial
console preference driver that prevents the installer GUI to only
appear on the serial port in this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This adds support for the first working sample of the MZSC2AM board,
revision 0.1
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add all the boilerplate to make the SPI NOR image updateable using
signed capsules and the FMP protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Now that we switched to PrePeiCore, we can execute the firmware image
in place, using a stack and temporary heap in non-secure SRAM. This
allows us to query the secure firmware for the size and placement of
DRAM, and also allows the use of capsules for firmware update.
NOTE: this requires ARM Trusted Firmware to be built with PRELOADED_BL33_BASE
set to the base of UEFI in the NOR flash, 0x820_0000 in our case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the non-volatile EFI variable store support, by switching from
the emulation driver to the real one, and enabling the prerequisite
FTW and NOR flash drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a device tree description of the SynQuacer SoC, and expose it for
the SynQuacerEvalBoard platforms. This includes the menu option in the
UEFI boot menu to switch between ACPI and DT.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the NETSEC driver to the SynQuacerEvalBoard platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the various drivers and libraries for the SynQuacerEvalBoard
platform. Also enable the usual PCI suspects: XHCI, SATA and NVME,
and the various bus, partition and file system drivers that we need
to make use of PCIe devices.
Given how PCI support enables USB support too, and taking the lack of
a RNG on this SoC into account, let's enable the ChaosKey driver as
well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This is a barebones port based on the .DSC/.FDF and ArmPlatformLib
code provided by Socionext. It can boot into the UiApp menu screen
or the UEFI Shell, but lacks support for any peripherals.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
