| Age | Commit message (Collapse) | Author |
|---|
|
Upstream EDK2 has refactored the implementation of the TFTP Shell
command so update the ARM platforms accordingly.
Instead of having to add the new module to all .FDF files under
Platform/ARM, add it to the 'networking FDF' include file and
include that everywhere. Also, add a build time option to omit
the TFTP command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The ArmPkg BdsLib has been dropped from EDK2, and is no longer
required by the Android*Boot applications - so delete the
reference to fix the resulting build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Move to our own private copy of FdtPlatformDxe and BdsLib so that we
can get rid of the upstream version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Move Juno to the migrated version of FdtPlatformDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Import FdtPlatformDxe from EmbeddedPkg into Platform/ARM, given that it
is not used anywhere else, nor should it be.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
We are about to migrate the only remaining user of the deprecated ARM
BdsLib, i.e., FdtPlatformDxe, into Platform/ARM. So create our own
copy of BdsLib, allowing us to finally remove it from upstream EDK2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Switch to the new version of PL011UartLib which supersedes the one
residing in Drivers/ inappropriately.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove all gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt assignments, which
are no longer meaningful with EBL removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
No drivers actually use PL35xSmcLib so remove any resolutions for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
None of these platforms still include EBL, but some references
remained to its support libraries. Get rid of that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
These platforms don't actually include the SP804 driver so no need
to set the PCDs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
ArmVExpress.dsc.inc declares a TimerLib dependency and resolves it
using ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.inf, but
all users of the include file supersede it with ArmArchTimerLib.inf
so let's just use that instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Move ArmJunoPkg into edk2-platforms, so it can be removed from the main
EDK2 tree.
This allows use to remove the dodgy -I arguments to GCC to build shared
modules with a different copy of ArmPlatform.h, which was making it very
difficult to properly split the various modules into their own packages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove false copy-pasted dependencies on various VExpress support
libraries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
No FVP driver uses this library so remove the resolution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmTrustedMonitorLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmPlatformSecExtraActionLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers, library resolutions and PCD settings to enable RTC
support on DeveloperBox. Also, update PlatformDxe to register the
non-discoverable device handles for both I2C controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Ordinary computers typically have a physical switch or jumper on the
board that allows non-volatile settings to be cleared. Let's implement
the same using DIP switch #1 on block #3, and clear the EFI variable
store if it is set to ON at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to improve the 'out of the box' experience when booting
this system with a monitor and keyboard attached, include the serial
console preference driver that prevents the installer GUI to only
appear on the serial port in this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This adds support for the first working sample of the MZSC2AM board,
revision 0.1
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add all the boilerplate to make the SPI NOR image updateable using
signed capsules and the FMP protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Now that we switched to PrePeiCore, we can execute the firmware image
in place, using a stack and temporary heap in non-secure SRAM. This
allows us to query the secure firmware for the size and placement of
DRAM, and also allows the use of capsules for firmware update.
NOTE: this requires ARM Trusted Firmware to be built with PRELOADED_BL33_BASE
set to the base of UEFI in the NOR flash, 0x820_0000 in our case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the non-volatile EFI variable store support, by switching from
the emulation driver to the real one, and enabling the prerequisite
FTW and NOR flash drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a device tree description of the SynQuacer SoC, and expose it for
the SynQuacerEvalBoard platforms. This includes the menu option in the
UEFI boot menu to switch between ACPI and DT.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the NETSEC driver to the SynQuacerEvalBoard platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the various drivers and libraries for the SynQuacerEvalBoard
platform. Also enable the usual PCI suspects: XHCI, SATA and NVME,
and the various bus, partition and file system drivers that we need
to make use of PCIe devices.
Given how PCI support enables USB support too, and taking the lack of
a RNG on this SoC into account, let's enable the ChaosKey driver as
well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This is a barebones port based on the .DSC/.FDF and ArmPlatformLib
code provided by Socionext. It can boot into the UiApp menu screen
or the UEFI Shell, but lacks support for any peripherals.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
"Instance of library class [CapsuleLib] is not found" build error is
coming for Hikey platform, to resolve this issue added CapsuleLib to
"LibraryClasses.common" section
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: kalyan-nagabhirava <kalyankumar.nagabhirava@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
In the MvSpiDxe driver obtaining host register base address,
controller clock and device maximum frequency directly from PCDs
was done all over the code. This patch cleans up the parameters'
handling and enables accessing them from SPI_DEVICE structure fields.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Spansion SPI flash devices use different command for bank
selection. Update it, basing on the first byte of flash ID.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Current usage of sf command requires running 'sf probe' prior to
executing any other option. Because it is done in two separate steps,
it turned out that SpiMasterProtocol->SetupDevice could easily
overwrite valid Slave pointer when performing second operation.
Fix the issue by allocating Slave device only once and keep it
as global variable in the SpiTool application. This patch
also updates FirmwareUpdate command to follow the modified
SetupDevice operation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Flash commands macros are already defined in MvSpiFlash.h, so
remove them from the protocol header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Hitherto mechanism of fixing SPI flash model in the PCDs,
occured to be very inefficient and problematic. Enable
dynamic detection by reworking MvSpiFlashReadId() command,
which now uses newly added NorFlashInfoLib, that helps to
obtain description of the JEDEC compliant devices.
This patch updates the MvSpiFlashProtocol ReadId() protocol
callback on both producer's (MvFlashDxe) and consumers' sides
(FirmwareUpdate and SpiTool applications). Because all
information about detected SPI NOR flash is now stored in
the obtained NorFlashInfo structure fields, use them instead
of the PCDs.
Enable compilation of the NorFlashInfoLib and update
PortingGuide documentation accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Fix the ReadId routine by using master's ReadWrite callback
instead of the raw Transfer - no longer swapping and byte
shifting is needed. Simplify code by using local array
instead of dynamic allocation. Moreover store the FlashId
in an UINT8 array PCD instead of the concatenated UINT32
format - this way less overhead in the driver is needed
for comparing the buffers.
The new handling allowed for cleaning Fupdate and Sf
shell commands FlashProbe routines.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Changing controller's FIFO default values is not necessary and
possibly can cause instabilities, when using some devices.
Disable the modification and rely on initial settings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Some SdMmc host controllers are run by clocks with different
frequency than it is reflected in Capabilities Register 1.
Because the bitfield is only 8 bits wide, a maximum value
that could be obtained from hardware is 255(MHz).
In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq
member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient
to be used for setting the clock speed in SdMmcHcClockSupply
function.
This patch adds new UINT32 array ('BaseClkFreq[]') to
SD_MMC_HC_PRIVATE_DATA structure for specifying
the input clock speed for each slot of the host controller.
All routines that are used for clock configuration are
updated accordingly.
Thanks to above the Xenon host controller driver
could be modified to configure clock speed relatively
to actual 400MHz input.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch fixes incorrect settings for UHS mode in
SD_MMC_HC_HOST_CTRL2 register for SDR50 and SDR25, of which
the latter was missing. This field should be set to:
0x4 for DDR52
0x2 for SDR50
0x1 for SDR25
0x0 for others.
This way EmmcSwitchToHighSpeed function is on par with Linux
set_uhs_signaling routine in the Xenon driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Currently initial forcing link status happened for all ports, not only
marked as 'always-up'. Although this didn't actually matter for the MAC
settings, because MAC is automatically updated with PHY HW polling
feature of the controller, perform mv_gop110_fl_cfg only when
the appropriate flag is true. Also in such case, force the link as up,
using a new library routine.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The MppSel definition PCDs contain 0xFF placeholders for values that
should be left untouched. MppLib needs to be taught how to take those
into account.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
MppLib may be used very early (in SEC), at which point stack protection
measures are more likely to cause harm than help, given that not even
the UART has been configured to the point where we can complain usefully.
So just disable it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
After enabling dynamic PCDs, it is possible to reconfigure
MPP during platform initialization. It occurred that due to
a faulty way of passing temporary values, information obtained
from PCDs was overwritten. This patch fixes the issue, which
on the occasion simplifies PcdToMppRegs function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Joe Zhou <shjzhou@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
During each transaction start, clearing the I2C_CONTROL_FLAG
was surrounded by 3 uncoditional stalls. This was not necessary,
so replace them with one busy-wait loop, whose polling
count could be also safely reduced.
Above improvements result in faster transfer initialization
and allow to reduce the I2C bus occupation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Greeson <dgreeson@cisco.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In MvI2cStartRequest the status was assigned to the variable
without dereferencing a pointer. Fix it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Although the I2C transaction routines were prepared to
return their status, they were never used. This could
cause bus lock-up e.g. in case of failing to send a
slave address, the data transfer was attempted to be
continued anyway.
This patch fixes faulty behavior by checking transaction
status and stopping it immediately, once the fail
is detected. On the occasion fix style around modified
functions calls.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Greeson <dgreeson@cisco.com>
[Style adjustment and cleanup]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Update the included components and library classes to make this platform
build for 32-bit ARM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add an ARM implementation of ArmPlatformHelper.S.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Instead of using hardcoded value in PcdSystemMemorySize PCD,
obtain DRAM size directly from SoC registers, which are filled
by firmware during early initialization stage.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The default MemoryInitPeiLib implementation insists on reserving the
region occupied by our own FV, while this is not necessary at all (the
compressed payload is uncompressed elsewhere, so the moment we enter
DXE core, we don't care about the FV contents in memory)
So clone MemoryInitPeiLib and modify it to suit our needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
