Age | Commit message (Collapse) | Author |
|
The Designware PCIe IP in the SynQuacer SoC needs a little help to
appear sane to the OS. Not only does it lack a true root port, and
therefore does not perform any filtering whatsoever of type 0 config
TLPs that are not intended for the link peer, it also has trouble
issuing 64-bit wide MMIO accesses, which are often used on MMIO BARs
with memory semantics (e.g., frame buffers).
So let's create a stage 2 mapping covering the entire physical address
space, and remap some ECAM regions and demote write combine attributes
to device/strongly ordered. This is not a water tight fix, but it does
work around the issues in the majority of cases.
(Note that the ECAM remapping can also be addressed in the SMMU mapping
of the PCIe IP exposed to the CPU, but this is currently under
development, and it does not hurt to have it in two places)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Even though the Secure96 device tree source is strictly an overlay, we
managed to express it in a way that does not rely on unresolved symbols
and other tricks that are only implemented in fairly recent versions of
the device tree compiler, and so adding the /plugin/ directive is not
only unnecessary, it is harmful because it is only understood by those
same recent compiler versions. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Commit 4bf95a9f361e ("MdeModulePkg/ResetSystemRuntimeDxe: Add more
debug message") broke the DEBUG build for all platforms that rely on
MMIO mapped UART devices, since it introduces a DEBUG() print that
may trigger at runtime, at which such UART devices are usually not
mapped, resulting in an OS crash.
Given that this mostly only affects ARM and AARCH64, it is not unlikely
that similar inadvertent breakage will occur again in the future, so
let's fix this once and for all by switching affected platforms to the
new DxeRuntimeDebugLibSerialPort DebugLib implementation that takes care
not to touch the UART hardware after ExitBootServices().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the various drivers for the 96Boards LS connector and the
optional Secure96 mezzanine board.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This adds a driver that manages the 96Boards LS connector, i.e, it
installs a HII page to configure the type of mezzanine that is installed
in the slot, and it exposes this information via the LS connector protocol.
It is also in charge of applying the overlay to the platform device tree
at end of DXE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a driver that describes the Secure96 mezzanine board, and exposes
both the information required to describe it to the OS using a DT overlay,
and to describe it to UEFI itself.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Introduce a protocol describing the presence of a 96boards low speed (LS)
connector, and identifying the type of mezzanine that has been installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement a I2C DXE driver that wires up the I2C devices exposed by
a 96boards mezzanine into the EDK2 I2C stack. Note that this requires
the platform to identify its I2C master implementations using special
GUIDs-as-protocols. It also assumes [for now] that I2C buses are not
shared between the 96boards connector and other platform peripherals.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Introduce the mezzanine protocol and the 96Boards package defining
the PCDs and GUIDs that may be used by implementations of the
protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add skeleton of HiKey960 platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Use common file Hisilicon.dsc.inc/Hisilicon.fdf.inc to reduce
redundant contents in both HiKey.dsc and HiKey.fdf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Dw8250SerialPortRuntimeLib only exists in D02.
DebugLib isn't necessary on HiKey platform. So add CONFIG_NO_DEBUGLIB
on it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Include DxePcdLib for HiiDatabase. Otherwise, PlatformBootManager
can't be launched successfully.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
edk2 commit 1ec2e7d0e8db
("MdeModulePkg/DxeCapsuleLibFmp: Use BmpSupportLib") broke the build of
all platforms that include DxeCapsuleLibFmp, since none of them included
a BmpSupportLib (added as part of the same series).
BmpSupportLib itself depends on SafeIntLib, so add the two libraries to
all affected platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Due to copy-paste error, both d03 and d05 ended up with capsule sections
named Capsule.StyxFirmwareUpdateCapsuleFmpPkcs7 in their .fdf files.
Change these to the actual platform names.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
PcdCacheEnabled was never useful for these platforms, but it was
copied over from other platforms used as templates.
Delete it here to keep the platforms building once the Pcd is removed
from EmbeddedPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
PcdCacheEnabled does nothing useful for these platforms.
Delete all uses of it here to keep the platforms building once the Pcd is
removed from EmbeddedPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
PcdCacheEnabled was never useful for these platforms, but they copied it
over from other platforms used as templates.
Delete it here to keep the platforms building once the Pcd is removed
from EmbeddedPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Replace the old string with short one. The old one is
too long that can not be show integrallty in Setup nemu.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
|
|
In SCT test,we find SP805 watchdog driver can't reset when timeout
so we use another driver in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: GongChengYa <gongchengya1@huawei.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
In SCT test,we find SP805 watchdog driver can't reset when timeout
so we use another driver in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: GongChengYa <gongchengya1@huawei.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Unify all D0x(include D06 in further) to cache coherent DmaLib.
This can improve boot speed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Yue <wangyue41@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
1. This driver install a protocol for SnpPV600Dxe driver.
The protocol indicate which ethernet port to use and port sequence.
2. Fixed bug:Confusing Ethernet port sequence.
Move the most right Ethernet port (when looking from the front
of the chassis) to the first one in BootManage for PXE boot.
https://bugs.linaro.org/show_bug.cgi?id=2657
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
This module install a protocol for SasDriverDxe. the protocol
include main information of sas controller, like controller ID,
enable or disable,base address of registers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
This module support updating the boot CPU firmware only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Modify the feature of BMC set boot option as switching generic
BDS. Break BMC SetBoot option out into BmcConfigBootLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Hisilicon-specific PlatformBootManagerLib added. It is convenient
to add specific feature, like BMC control boot option.
Remove Intel BDS from dsc file because it is out of use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Add Processor Properties Topology Table, PPTT include
Processor hierarchy node, Cache Type Structure and ID structure.
PPTT is needed for lscpu command to show socket information correctly.
https://bugs.linaro.org/show_bug.cgi?id=3206
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reveiwed-by: Jeremy Linton <jeremy.linton@arm.com>
|
|
A set of mostly Ebl-related Pcds are about to be deleted from
edk2. Delete references to them here to keep platforms building.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
A set of mostly Ebl-related Pcds are about to be deleted from
edk2. Delete references to them here to keep platforms building.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
'AMD Seattle' is not a firmware vendor, nor is 'LeMaker Cello' So
let's do what other platforms do, and default to 'EDK II' unless
it is overridden at build time by setting FIRMWARE_VENDOR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the ConsolePrefDxe driver so we can get the console on the framebuffer
rather than on the serial port.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the first part of the flash device (FD) to the capsule image so we
can update the secure and SCP firmware in one go along with the UEFI
firmware volume (FV).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Switch to the split prebuilt firmware image for the SCP and the AP
secure world. This allows Overdrive and Cello to share the latter
image, which we will update shortly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement support for the SynQuacer eMMC controller. This involves an
implementation of the SD/MMC override protocol to handle a couple of
quirks that would otherwise prevent this IP from being driven by the
generic SDHCI driver.
Also, add a HII page to the PlatformDxe driver that allows eMMC support
to be enabled, and wire it up for both DeveloperBox and EVB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The base models could have different values for the revision ID field
in the System ID register. Base models do not have support for DVI
and so the revision ID field should also be masked out when checking
for the presence of DVI support.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
[Reworded adjacent code comments.]
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Add the drivers that make the serial and graphical console behave more
intuitively.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the RamDiskDxe driver, which is required for HTTP booting .iso
images.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add menu options to the SynQuacer Platform menu screen to limit the
maximum PCIe link speed for each slot individually. This may be useful
to work around potential PCIe issues.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Flash memory is mapped as device memory and should use only aligned
accesses.
Update VariableRuntimeDxe from using BaseMemoryLibOptDxe to the generic
BaseMemoryLib which provides aligned memory access only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <Alxei.Fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Remove unused ArmPlatformPkg PCDs from all platform descriptions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Before retiring the gArmPlatformTokenSpaceGuid.PcdFirmwareVendor PCD,
replace the only remaining and vaguely non-pointless reference with
a new dedicated PCD defined in VExpressPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The EVB does not boot if PCI RC #0 has no card inserted, and will hang in
the PCIe initialization code. So let's check the presence detect GPIO,
and only enable PCI RC #0 if it is asserted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
If a PCIe RC is not enabled (due to the fact that the slot is not
populated), set its DT node 'status' property to 'disabled' so that
the OS will not attempt to attach to it.
This means we will need to switch from the default DtPlatformDtbLoaderLib
to a special one for our platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Expose the contents of the .DSC macro BUILD_NUMBER via the
PCD gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString (if > 1),
and as the FMP system firmware version (for capsule update).
Also, set the firmware vendor PCD to the contents of the macro
FIRMWARE_VENDOR so that we can set its value at build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Update the TC2 .dsc and .fdf files to switch over to the refactored
LCD graphics output driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Update the FVP .dsc and .fdf files to switch over to the refactored LCD
graphics output driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In the rework between v1 and v2 of my ArmPlatformPkg cleanup series,
I restored the LCD output graphics drivers in mainline EDK2, but
forgot to restore some of the PCDs that now remain in ArmPlatformPkg
as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
BootMonFs and ArmShellCmdRunAxf are only used on development boards
manufactured by ARM itself, so let's keep it under Platform/ARM where
it belongs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Import the pieces that are closely tied to the ARM Versatile Express
development platforms into edk2-platforms, so they can be removed from
upstream EDK2.
Note that this includes the ArmPlatformSysConfigLib library class, which
is not used anywhere else.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|