| Age | Commit message (Collapse) | Author |
|---|
|
None of these platforms still include EBL, but some references
remained to its support libraries. Get rid of that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove false copy-pasted dependencies on various VExpress support
libraries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmTrustedMonitorLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmPlatformSecExtraActionLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers, library resolutions and PCD settings to enable RTC
support on DeveloperBox. Also, update PlatformDxe to register the
non-discoverable device handles for both I2C controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a RealTimeClockLib implementation for the NXP PCF8563 as used on
the Socionext Developer Box board. Note that the standard I2C protocol
stack does not support runtime use, so this driver invokes the I2C master
protocol directly. This requires support from the platform side as well,
and so this driver will only attach to a I2C master that has the
gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its
handle. It is up to the platform to ensure that the driver producing
the I2C master protocol in question is runtime capable, and is not
shared with the I2C protocol stack (i.e., it should not have the I2C
Bus Configuration Management protocol installed as well).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a driver that produces the I2C master protocol on top of the I2C
controllers that are implemented in the SynQuacer Socionext SoC. Note
that this supports two modes simultaneously: I2C controllers that are
only usable at boot time, and usable via the I2C protocol stack, and
I2C controllers that are dedicated for the RTC or other runtime
components.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Describe the SynQuacer SoC's eMMC controller in DT so the OS can
attach to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Ordinary computers typically have a physical switch or jumper on the
board that allows non-volatile settings to be cleared. Let's implement
the same using DIP switch #1 on block #3, and clear the EFI variable
store if it is set to ON at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to be able to sample the state of the DIP switches at early
boot on the Developer Box platform, implement the GPIO PPI based on
the GPIO block that is implemented in the SynQuacer SoC.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In preparation of adding support for setting a DIP switch to clear the
EFI variable store, update the early capsule handling logic to take the
boot mode into account.
This is necessary for two reasons:
- we override the boot mode when a capsule is detected,
- the capsule detection itself involves reading a EFI variable, which we
shouldn't be doing if the varstore may be in a bad state.
So factor out the initial capsule check (to keep the code understandable)
and only perform it if we are not booting in 'clear NVRAM' mode.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the power button as a gpio-keys KEY_POWER button, and mark it as
a wakeup source so it can be used under the OS both as a 'sleep' and
as a 'wake' button.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Add a DT node for the external interrupt unit (EXIU), which handles
interrupts from GPIO lines. We need OS support for this for things
like PHY interrupts and a 'wake' button.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a description of the SoCs GPIO controller as well as a description
of DIP switch block #3, which is wired to GPIOs 0 - 7, both on the
evaluation board as well as the Developer Box.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This adds support for the first working sample of the MZSC2AM board,
revision 0.1
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement workaround suggested by Socionext to get legacy endpoints
with 32-bit BARs working. This fixes the issue on Developer Box with
the onboard ASM1061 SATA controller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add support for dealing with capsules left in memory by the OS before
reboot. This needs to be done early, before the memory is reused, which
is why the initial handling must reside here.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to support capsule update, implement PlatformFlashAccessLib that
exposes write access to the UEFI NOR partition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the non-volatile EFI variable store support, by switching from
the emulation driver to the real one, and enabling the prerequisite
FTW and NOR flash drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This imports the driver sources provided by Socionext for the FIP006
SPI NOR flash device found on SynQuacer SoCs. It has been slightly
tweaked to bring it up to date with the changes made on the EDK2 side
since it was forked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pipat Methavanitpong <methavanitpong.pipat@socionext.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the platform glue for the NOR flash driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a device tree description of the SynQuacer SoC, and expose it for
the SynQuacerEvalBoard platforms. This includes the menu option in the
UEFI boot menu to switch between ACPI and DT.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The SynQuacer SOC has two separate PCIe RCs, which means there is
no single value for the translation offset between I/O port accesses
and MMIO accesses. So add a special implementation of EFI_CPU_IO2_PROTOCOL
that takes the two disjoint I/O windows into account.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement the glue library that exposes the PCIe root complexes to
the generic PCI host bridge driver. Since that driver is the first
one to access the PCI config space, put the low level init code for
the RCs into this library's constructor.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Having two distinct root complexes is not supported by the standard
set of PciLib/PciExpressLib/PciSegmentLib, so let's reimplement one
of the latter specifically for this platform (and forget about the
others).
This also allows us to implement the Synopsys Designware PCIe specific
workaround for PCI config space accesses to devices 1 and up on bus 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This is a barebones port based on the .DSC/.FDF and ArmPlatformLib
code provided by Socionext. It can boot into the UiApp menu screen
or the UEFI Shell, but lacks support for any peripherals.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement MemoryInitPeiLib based on the newly added DramInfo
PPI, which retrieves the DRAM information from lower level
firmware.
Note that the firmware volumes in SPI NOR are mapped with
different attributes: the FV containing the PEI modules that
may execute in place is mapped as uncached memory, given that
it requires executable permissions. The FV containing the
compressed DXE modules is mapped with device attributes for
performance (!), and copied into DRAM by the platform PEIM
once permanent memory is installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This implements a driver that will take care of platform specific
initialization, such as declaring non-discoverable devices, and
installing the device tree blob as a configuration table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Create a specialized PlatformPeiLib implementation that invokes the
platform specific firmware interface (currently, just a data structure
left in SRAM) to set the ARM standard PcdSystemMemoryBase|Size PCDs,
and expose the information via a newly added DramInfo PPI.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This adds the NetSecDxe driver provided by Socionext, but reworked
extensively to improve compliance with the SimpleNetworkProtocol API,
and to avoid uncached allocations for streaming DMA.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a package .DEC description for SynQuacer with an [Includes]
section, and add header files containing descriptions of the
platform's memory map and PCIe configuration. No code yet.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Hitherto mechanism of fixing SPI flash model in the PCDs,
occured to be very inefficient and problematic. Enable
dynamic detection by reworking MvSpiFlashReadId() command,
which now uses newly added NorFlashInfoLib, that helps to
obtain description of the JEDEC compliant devices.
This patch updates the MvSpiFlashProtocol ReadId() protocol
callback on both producer's (MvFlashDxe) and consumers' sides
(FirmwareUpdate and SpiTool applications). Because all
information about detected SPI NOR flash is now stored in
the obtained NorFlashInfo structure fields, use them instead
of the PCDs.
Enable compilation of the NorFlashInfoLib and update
PortingGuide documentation accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
When switching to generic PSCI reset library, obsolete parts
of previous custom reset library (PCDs, documentation) remained.
Remove them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In preparation of adding capsule support to the AMD Styx aka Seattle
based platforms, implement a PlatformFlashAccessLib instance that
invokes the ISCP to update the FV containing our UEFI image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The StyxFlashUefi application was not migrated correctly from
OpenPlatformPkg to edk2-platforms. It will be superseded shortly
by capsule update support, but let's put it back into a working
state before we remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The IORT spec has been updated to include more specific defines for the
MMU-401, which supports more page sizes than the generic SMMU v1. Note
that this requires an OS that understands these new definitions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch removes tabs and wrong line endings in the file, maiking
it acceptable to the PatchCheck.py script.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Hitherto PHY handling in Pp2Dxe was not flexible. It allowed for using
only single MDIO controller, which may not be true on Armada 80x0 SoCs.
For this purpose introduce the MDIO description, using the new structures
and template in MvHwDescLib. This change enables addition of multiple
CP110 hardware blocks with MDIO controllers.
This change required different PHY handling and obtaining data over
desired MDIO bus. Now given Pp2 port is matched with the PHY via
its index in gMarvellTokenSpaceGuid.PcdPhyDeviceIds. The PHY itself
is mapped to the MDIO controller, using
gMarvellTokenSpaceGuid.PcdPhy2MdioController. Also obtaining
SMI addresses was moved to the PHY initialization routine.
All above allow for much cleaner and logical PHY description
in the .dsc file, which now uses macros for connection type
and speed.
Update PortingGuide documentation accordingly and Armada 70x0 DB
NIC/PHY description.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch introduces UTMI description, using the new structures
and template in MvHwDescLib. This change enables more flexible
addition of multiple CP with UTMI PHY's and also significantly
reduces amount of used PCD's for that purpose. Update PortingGuide
documentation accordingly.
This patch replaces string-based description of Utmi on
Armada 70x0 DB with new, reduced format, which uses macros
in Armada.dsc.inc file for better readability.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch introduces I2c description, using the new structures
and template in MvHwDescLib. This change enables more flexible
addition of multiple I2c controllers and also allows for
removal of string PCD parsing. Update Armada 70x0 DB description
and PortingGuide accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Simplify obtaining lane data, using arrays with direct enum values,
rather than strings. This is another step to completely remove
ParsePcdLib.
This patch replaces string-based description of ComPhy lanes
on Armada 70x0 DB with the enum values of type and speed -
for that purpose new [Defines] section was added to Armada.dsc.inc
file in order to increase readability.
PortingGuide is updated accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Although, hitherto support allowed for using configurable EraseSize,
the erase command was fixed to CMD_ERASE_64K. Also it was
assumed that EraseSize equals SectorSize, which is not true
for some flash devices. Fix both issues by adding new PCD
(gMarvellTokenSpaceGuid.PcdSpiFlashPageSize) and using
this parameter properly in MvSpiFlashUpdate routine instead
of the EraseSize. Also erase command is adjusted to the settings.
Update PortingGuide accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Until now transfer SCLK mode and CS were fixed, when using
shell 'sf' command. This patch enables their configuration.
Update porting guide accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch introduces following improvements to the PortingGuide
* Replace split documentation with single file
* Update paths to new directory structure in edk2-platforms
* Align format to Doxygen constraints
Moreover the PortingGuide and remaining Drivers' documentation
is moved to the new location under Silicon/Marvell, where in future
all other bits of the support will be moved.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
When building with a somewhat recent toolchain (GCC 6.3), the D02
platform fails due to (the implicit) -Werror=misleading-indentation.
Cc: Heyi Guo <heyi.guo@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Assign valid value to AddressTranslationOffset to support
address translation between domains of CPU and PCIe, which
is need by GOP to enable frame buffer.
This patch fix the bug:
Kernel (4.12, without the vga driver) boot hang with kernel panic
while kernel accesses UEFI GOP frame buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yan Zhang <zhangyan81@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
1. Because Hi161x chip doesn't support "ARI Forwarding Enable"
function, BIOS will enumerate 32 same devices (Device Number 0~31)
when a Non-ARI capable device attached in the RP. Hi161x chip will
not fix it, need BIOS patch.
2. Just enlarge iatu for those root port with ARI capable device
attached, Non-ARI capable device's RP, keep iatu limitation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jason zhang <zhangjinsong2@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
1. Disable I2C0 device avoiding access conflict in OS, for it is used
by UEFI to access DS3231 RTC chip and provide time services;
2. Modify _HID of I2C2 for matching the string in OS driver;
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
There is no interface from SAS0 or SAS2 controller on D05,
so SAS0 and SAS2 can't be used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The PerTuning function is not stable, it will cause the
LSI SAS 3008/3108 crash, disable this function first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chenhui Sun <chenhui.sun@linaro.org>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
