Age | Commit message (Collapse) | Author |
|
The upstream version of the Linux NETSEC driver expects the PHY DT
node to appear under a MDIO subnode, so fix this in the device tree.
Fix the node name as well, this should be 'ethernet' not 'netsec',
and add a clock-names property describing the single clock reference
as 'phy_ref_clk'.
Also, move the PHY subnode into the per-platform .dts file so we can
set the unit address in the node name. This is necessary because recent
versions of the DT compiler are more finicky about this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Align the UART DT nodes:
- use 'uart' not 'fuart' as node name for the second serial port
- create an alias 'serial1' for the second serial port
- use UART clock reference instead of hardcoded frequency
- split 'clocks' property into 1 cell per phandle
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
To ensure that the I2C master protocol is installed immediately onto
the handles created by PlatformDxe in its entry point, force the
SynQuacerI2cDxe driver to be loaded before PlatformDxe. These handles
are recursively connected by the DXE core as soon as they appear, and
so ensuring that the I2C master protocol driver is available at this
time will ensure that these handles will be connected to it right away.
This is useful when implementations of architectural protocols such as
RTC or the EFI variable store, which should become available long before
the ordinary dispatch of UEFI driver model drivers is started at the end
of DXE, are based on I2C.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove a %r without an associated parameter.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Instead of registering a notification callback on the driver binding
protocol, and attempting to connect our I2C master handle each time
a new driver is registered, switch to the more obvious approach of
registering a notification callback on the I2C master protocol directly.
The original code was written under the assumption that it would make
the RTC available at an earlier time, but given that all handles that
are created during the execution of a driver entry point are connected
by DXE core right away (i.e., before StartImage() returns), this is not
really necessary, and in fact, may result in the driver already having
been connected by the time we attempt to connect it.
Note that it is now up to the platform to ensure that ConnectController()
is called for the handle if DXE core does not call it by itself, or does
call it but at a time when no I2C master protocol driver is available
yet.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Do a global replace of gPcf8563RealTimeClockLibI2cMasterProtolGuid with
gPcf8563RealTimeClockLibI2cMasterProtocolGuid.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The ASM1061 SATA controller integrated into the DeveloperBox board
emits too much electromagnetic radiation, so it needs spread spectrum
mode enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove unused ArmPlatformPkg PCDs from all platform descriptions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
For some reason, the Asmedia 118x PCIe switch needs a little help to
make sure that the downstream links train at Gen2 speed. So add a
PCI I/O protocol notifier that implements this for each PCIe downstream
port that is present on the system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to be able to use UART #0 on the DeveloperBox's 96boards low
speed connector, expose it to the OS by adding a node to the device
tree. This requires a CM3 firmware build that makes the SCP detach
from the serial port after boot.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Masahisa KOJIMA <kojima.masahisa@socionext.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The EVB does not boot if PCI RC #0 has no card inserted, and will hang in
the PCIe initialization code. So let's check the presence detect GPIO,
and only enable PCI RC #0 if it is asserted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
If a PCIe RC is not enabled (due to the fact that the slot is not
populated), set its DT node 'status' property to 'disabled' so that
the OS will not attempt to attach to it.
This means we will need to switch from the default DtPlatformDtbLoaderLib
to a special one for our platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to accommodate the EVB, whose PCIe RC #0 should not be touched
by software if no card is inserted, add a PCD that tells the PCIe driver
code which RCs should be initialized and exposed to the PCI host bridge
driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Attempt to adhere more closely to the PCIe spec by ensuring that PERST#
remains asserted for at least 100 ms. Give it a good margin, and delay
for 150 ms; the additional boot time delay is not going to be noticeable
by anyone anyway.
Add some missing barriers as well, so that the reset takes effect right
when we think it does.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
It appears that whatever was preventing us from using CPU idle with
PSCI low power states has disappeared, so let's enable the low power
states in the DT.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
'PciEmulation' is not a proper naming for a driver, which
uses NonDiscoverableDeviceRegistrationLib for handling
the devices attached via internal bus of the SoC.
Rename it to MvNonDiscoverableDxe and move under
Silicon/Marvell/Drivers directory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
MvEeprom driver nesting into additional Devices directory
under Silicon/Marvell/Drivers/I2c is redundant. Align
its level with MvI2cDxe.
Change MvEeprom to MvEepromDxe in order to be
more consistent in Marvell drivers naming.
On the occasion add sorting in the .inf file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
MvPhyDxe driver nesting into additional Phy directory
under Silicon/Marvell/Drivers/Net is redundant. Align
its level with MvMdioDxe and Pp2Dxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Hitherto MvSpiDxe driver name was very generic. In order to
be ready for adding new SPI master drivers, use the controller's
traditional name (it's called SPI Orion in Linux and
U-Boot) for files and the entry point.
Additionally, move the files to new 'MvSpiOrionDxe' directory
and rename the 'Devices' and 'Variables' to reflect actual drivers'
names. Change MvSpiFlash to MvSpiFlashDxe in order to be
more consistent. On the occasion add sorting in the .inf files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
As a part of files reorganization, switch to using '7k8k'
in all SoC-specific driver/library code instead of
'70x0'/'7040', so that to ensure consistent naming for
entire SoC family.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
In edk2-platforms it is expected to provide a separation between
SoC and boards files in 'Silicon' and 'Platform' directories
accordingly.
This patch aligns Marvell code to this requirement with no functional
changes in the actual source files, unless required due to modified
paths. Change the supported board's files names to proper Armada70x0Db.
Also rename 'Armada' directory to 'Armada7k8k' in order to properly
refer to the SoC family and prevent confusion in future, when
adding new Armada machines. On the occasion add ARM copyright,
which was wrongly missing in the dsc.inc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Commit ce95ec196da0 ("Silicon/SynQuacer: enable coherent DMA for NETSEC
and eMMC") introduced a call to MmioOr32 into PlatformDxe without adding
the appropriate #include and LibraryClass references, resulting in build
failures when attempting to build the SynQuacer platforms. So add them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
As it turns out, it is surprisingly easy to configure both the NETSEC
and eMMC devices as cache coherent for DMA, given that they are both
behind the same SMMU which is already configured in passthrough mode
by the firmware running on the SCP.
So update the static SMMU configuration to make memory accesses performed
by these devices inner shareable inner/outer writeback cacheable, which
makes them cache coherent with the CPUs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The I2C driver prints a warning under DEBUG when a I2C transaction times
out. This will occur on the rev 0.1 DeveloperBox boards due to a board
level error in the I2C routing (unless the MCU has been lifted off the
bus).
Currently, this will trigger a crash due to a missing __FUNCTION__
argument to a %a specifier in a DEBUG string, because instead, the code
will attempt to dereference a EFI_STATUS variable as a char pointer.
So add the missing __FUNCTION__ argument.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Now that we incorporated NorFlashInfoLib into the Fip006Dxe driver,
replace the code that explicitly enables flag status register polling
for Micron NOR flash with a test of the flags field provided by
NorFlashInfoLib, which carries the same information.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pipat Methavanitpong <methavanitpong.pipat@socionext.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
As it turns out, getting the PCIe controllers to switch to Gen2 speed
is surprisingly easy. It only involves setting the 'speed change' bit
in the controller at initialization time, after which the hardware
will automatically attempt to switch to Gen2 speed after training at
Gen1 speed has completed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Fix the weird indentation in the various #defines in the file containing
the RC init code. This is a whitespace only change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The function ArmPlatformInitializeSystemMemory () has been removed from
ArmPlatformLib, so remove all the [empty] implementations provided by
the various platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
EDK2 changed the tftp shell command from a library to a
dynamic command. Update configuration files to reflect this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The function ArmGetCpuCountPerCluster () was moved out of ArmPlatformLib
because it was unused (except internally by one of the implementations)
So remove the remaining implementations from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Switch to the new version of PL011UartLib which supersedes the one
residing in Drivers/ inappropriately.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove all gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt assignments, which
are no longer meaningful with EBL removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
No drivers actually use PL35xSmcLib so remove any resolutions for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
None of these platforms still include EBL, but some references
remained to its support libraries. Get rid of that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove false copy-pasted dependencies on various VExpress support
libraries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmTrustedMonitorLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmPlatformSecExtraActionLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers, library resolutions and PCD settings to enable RTC
support on DeveloperBox. Also, update PlatformDxe to register the
non-discoverable device handles for both I2C controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a RealTimeClockLib implementation for the NXP PCF8563 as used on
the Socionext Developer Box board. Note that the standard I2C protocol
stack does not support runtime use, so this driver invokes the I2C master
protocol directly. This requires support from the platform side as well,
and so this driver will only attach to a I2C master that has the
gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its
handle. It is up to the platform to ensure that the driver producing
the I2C master protocol in question is runtime capable, and is not
shared with the I2C protocol stack (i.e., it should not have the I2C
Bus Configuration Management protocol installed as well).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a driver that produces the I2C master protocol on top of the I2C
controllers that are implemented in the SynQuacer Socionext SoC. Note
that this supports two modes simultaneously: I2C controllers that are
only usable at boot time, and usable via the I2C protocol stack, and
I2C controllers that are dedicated for the RTC or other runtime
components.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Describe the SynQuacer SoC's eMMC controller in DT so the OS can
attach to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Ordinary computers typically have a physical switch or jumper on the
board that allows non-volatile settings to be cleared. Let's implement
the same using DIP switch #1 on block #3, and clear the EFI variable
store if it is set to ON at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to be able to sample the state of the DIP switches at early
boot on the Developer Box platform, implement the GPIO PPI based on
the GPIO block that is implemented in the SynQuacer SoC.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In preparation of adding support for setting a DIP switch to clear the
EFI variable store, update the early capsule handling logic to take the
boot mode into account.
This is necessary for two reasons:
- we override the boot mode when a capsule is detected,
- the capsule detection itself involves reading a EFI variable, which we
shouldn't be doing if the varstore may be in a bad state.
So factor out the initial capsule check (to keep the code understandable)
and only perform it if we are not booting in 'clear NVRAM' mode.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the power button as a gpio-keys KEY_POWER button, and mark it as
a wakeup source so it can be used under the OS both as a 'sleep' and
as a 'wake' button.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Add a DT node for the external interrupt unit (EXIU), which handles
interrupts from GPIO lines. We need OS support for this for things
like PHY interrupts and a 'wake' button.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a description of the SoCs GPIO controller as well as a description
of DIP switch block #3, which is wired to GPIOs 0 - 7, both on the
evaluation board as well as the Developer Box.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This adds support for the first working sample of the MZSC2AM board,
revision 0.1
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement workaround suggested by Socionext to get legacy endpoints
with 32-bit BARs working. This fixes the issue on Developer Box with
the onboard ASM1061 SATA controller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add support for dealing with capsules left in memory by the OS before
reboot. This needs to be done early, before the memory is reused, which
is why the initial handling must reside here.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|