From d38c35f9f76661ec85859cfaa751f664363c131e Mon Sep 17 00:00:00 2001 From: oliviermartin Date: Tue, 12 Mar 2013 00:40:11 +0000 Subject: EmbeddedPkg: Introduced a separate SerialPortExtLib library Formerly only the header was defined and it was expecting the SerialPortExtLib interface to be implemented by SerialPortLib if supported. This behaviour was not conform to the EDK2 framework. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14173 6f19259b-4bc3-4df7-8a09-765794883524 --- .../ArmRealViewEbPkg/ArmRealViewEb.dsc.inc | 1 + ArmPlatformPkg/ArmVExpressPkg/ArmVExpress.dsc.inc | 1 + .../PL011SerialPortLib/PL011SerialPortExtLib.c | 103 +++++++++++++++++++++ .../PL011SerialPortLib/PL011SerialPortExtLib.inf | 43 +++++++++ .../PL011SerialPortLib/PL011SerialPortLib.c | 79 ---------------- BeagleBoardPkg/BeagleBoardPkg.dsc | 1 + EmbeddedPkg/EmbeddedPkg.dsc | 2 + .../TemplateSerialPortExtLib.c | 79 ++++++++++++++++ .../TemplateSerialPortExtLib.inf | 36 +++++++ .../TemplateSerialPortLib/TemplateSerialPortLib.c | 60 ------------ .../TemplateSerialPortLib.inf | 8 +- EmbeddedPkg/SerialDxe/SerialDxe.inf | 1 + Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c | 55 ----------- .../Library/SerialPortLib/SerialPortLib.inf | 4 +- 14 files changed, 273 insertions(+), 200 deletions(-) create mode 100644 ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c create mode 100644 ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.inf create mode 100644 EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.c create mode 100644 EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.inf diff --git a/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb.dsc.inc b/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb.dsc.inc index 52b324c603..bc4807f3f1 100644 --- a/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb.dsc.inc +++ b/ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb.dsc.inc @@ -67,6 +67,7 @@ EfiResetSystemLib|ArmPlatformPkg/ArmRealViewEbPkg/Library/ResetSystemLib/ResetSystemLib.inf RealTimeClockLib|ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealTimeClockLib.inf SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf + SerialPortExtLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.inf TimerLib|ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.inf # ARM PL011 UART Driver PL011UartLib|ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf diff --git a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress.dsc.inc b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress.dsc.inc index bbd00fdd26..47dc0ff762 100644 --- a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress.dsc.inc +++ b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress.dsc.inc @@ -77,6 +77,7 @@ # ARM PL011 UART Driver PL011UartLib|ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf + SerialPortExtLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.inf # ARM SP804 Dual Timer Driver TimerLib|ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.inf diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c new file mode 100644 index 0000000000..9bfe42e60c --- /dev/null +++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c @@ -0,0 +1,103 @@ +/** @file + Serial I/O Port library functions with no library constructor/destructor + + Copyright (c) 2012, ARM Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include + +#include +#include +#include + +#include + +/** + Set new attributes to PL011. + + @param BaudRate The baud rate of the serial device. If the baud rate is not supported, + the speed will be reduced down to the nearest supported one and the + variable's value will be updated accordingly. + @param ReceiveFifoDepth The number of characters the device will buffer on input. If the specified + value is not supported, the variable's value will be reduced down to the + nearest supported one. + @param Timeout If applicable, the number of microseconds the device will wait + before timing out a Read or a Write operation. + @param Parity If applicable, this is the EFI_PARITY_TYPE that is computed or checked + as each character is transmitted or received. If the device does not + support parity, the value is the default parity value. + @param DataBits The number of data bits in each character + @param StopBits If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character. + If the device does not support stop bits, the value is the default stop + bit value. + + @retval EFI_SUCCESS All attributes were set correctly on the serial device. + @retval EFI_INVALID_PARAMETERS One or more of the attributes has an unsupported value. + +**/ +RETURN_STATUS +EFIAPI +SerialPortSetAttributes ( + IN UINT64 BaudRate, + IN UINT32 ReceiveFifoDepth, + IN UINT32 Timeout, + IN EFI_PARITY_TYPE Parity, + IN UINT8 DataBits, + IN EFI_STOP_BITS_TYPE StopBits + ) +{ + return PL011UartInitializePort ( + (UINTN)PcdGet64 (PcdSerialRegisterBase), + BaudRate, + ReceiveFifoDepth, + Parity, + DataBits, + StopBits); +} + +/** + Set the serial device control bits. + + @param Control Control bits which are to be set on the serial device. + + @retval EFI_SUCCESS The new control bits were set on the serial device. + @retval EFI_UNSUPPORTED The serial device does not support this operation. + @retval EFI_DEVICE_ERROR The serial device is not functioning correctly. + +**/ +RETURN_STATUS +EFIAPI +SerialPortSetControl ( + IN UINT32 Control + ) +{ + return PL011UartSetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control); +} + +/** + Get the serial device control bits. + + @param Control Control signals read from the serial device. + + @retval EFI_SUCCESS The control bits were read from the serial device. + @retval EFI_DEVICE_ERROR The serial device is not functioning correctly. + +**/ +RETURN_STATUS +EFIAPI +SerialPortGetControl ( + OUT UINT32 *Control + ) +{ + return PL011UartGetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control); +} + diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.inf b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.inf new file mode 100644 index 0000000000..89c8c9c119 --- /dev/null +++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.inf @@ -0,0 +1,43 @@ +#/** @file +# +# Component description file for PL011SerialPortLib module +# +# Copyright (c) 2011-2012, ARM Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#**/ + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = PL011SerialPortExtLib + FILE_GUID = 2be281f1-c506-4558-bd98-d6930e6de9d6 + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = SerialPortExtLib + +[Sources.common] + PL011SerialPortExtLib.c + +[LibraryClasses] + PL011UartLib + PcdLib + +[Packages] + EmbeddedPkg/EmbeddedPkg.dec + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + +[Pcd] + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c index 20e8882713..09033dbd76 100644 --- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c +++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c @@ -103,82 +103,3 @@ SerialPortPoll ( return PL011UartPoll ((UINTN)PcdGet64 (PcdSerialRegisterBase)); } -/** - Set new attributes to PL011. - - @param BaudRate The baud rate of the serial device. If the baud rate is not supported, - the speed will be reduced down to the nearest supported one and the - variable's value will be updated accordingly. - @param ReceiveFifoDepth The number of characters the device will buffer on input. If the specified - value is not supported, the variable's value will be reduced down to the - nearest supported one. - @param Timeout If applicable, the number of microseconds the device will wait - before timing out a Read or a Write operation. - @param Parity If applicable, this is the EFI_PARITY_TYPE that is computer or checked - as each character is transmitted or received. If the device does not - support parity, the value is the default parity value. - @param DataBits The number of data bits in each character - @param StopBits If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character. - If the device does not support stop bits, the value is the default stop - bit value. - - @retval EFI_SUCCESS All attributes were set correctly on the serial device. - @retval EFI_INVALID_PARAMETERS One or more of the attributes has an unsupported value. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetAttributes ( - IN UINT64 BaudRate, - IN UINT32 ReceiveFifoDepth, - IN UINT32 Timeout, - IN EFI_PARITY_TYPE Parity, - IN UINT8 DataBits, - IN EFI_STOP_BITS_TYPE StopBits - ) -{ - return PL011UartInitializePort ( - (UINTN)PcdGet64 (PcdSerialRegisterBase), - BaudRate, - ReceiveFifoDepth, - Parity, - DataBits, - StopBits); -} - -/** - Set the serial device control bits. - - @param Control Control bits which are to be set on the serial device. - - @retval EFI_SUCCESS The new control bits were set on the serial device. - @retval EFI_UNSUPPORTED The serial device does not support this operation. - @retval EFI_DEVICE_ERROR The serial device is not functioning correctly. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetControl ( - IN UINT32 Control - ) -{ - return PL011UartSetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control); -} - -/** - Get the serial device control bits. - - @param Control Control signals read from the serial device. - - @retval EFI_SUCCESS The control bits were read from the serial device. - @retval EFI_DEVICE_ERROR The serial device is not functioning correctly. - -**/ -RETURN_STATUS -EFIAPI -SerialPortGetControl ( - OUT UINT32 *Control - ) -{ - return PL011UartGetControl((UINTN)PcdGet64 (PcdSerialRegisterBase), Control); -} diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc index 0ae815075c..1223944bed 100644 --- a/BeagleBoardPkg/BeagleBoardPkg.dsc +++ b/BeagleBoardPkg/BeagleBoardPkg.dsc @@ -83,6 +83,7 @@ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf SerialPortLib|Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf + SerialPortExtLib|EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.inf SemihostLib|ArmPkg/Library/SemihostLib/SemihostLib.inf RealTimeClockLib|Omap35xxPkg/Library/RealTimeClockLib/RealTimeClockLib.inf diff --git a/EmbeddedPkg/EmbeddedPkg.dsc b/EmbeddedPkg/EmbeddedPkg.dsc index e1a4c225e6..64b220c3c1 100644 --- a/EmbeddedPkg/EmbeddedPkg.dsc +++ b/EmbeddedPkg/EmbeddedPkg.dsc @@ -3,6 +3,7 @@ # # # Copyright (c) 2007, Intel Corporation. All rights reserved.
+# Copyright (c) 2012, ARM Ltd. All rights reserved.
# # This program and the accompanying materials # are licensed and made available under the terms and conditions of the BSD License @@ -69,6 +70,7 @@ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf SerialPortLib|EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.inf + SerialPortExtLib|EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.inf RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf EfiResetSystemLib|EmbeddedPkg/Library/TemplateResetSystemLib/TemplateResetSystemLib.inf GdbSerialLib|EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.inf diff --git a/EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.c b/EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.c new file mode 100644 index 0000000000..5a007c25f6 --- /dev/null +++ b/EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.c @@ -0,0 +1,79 @@ +/** @file + Extended Serial I/O Port library functions + + Copyright (c) 2012, ARM Ltd. All rights reserved. + + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include + +#include +#include + +/** + Set the serial device control bits. + + @return Always return RETURN_UNSUPPORTED. + +**/ +RETURN_STATUS +EFIAPI +SerialPortSetControl ( + IN UINT32 Control + ) +{ + return RETURN_UNSUPPORTED; +} + +/** + Get the serial device control bits. + + @param Control Control signals read from the serial device. + + @retval EFI_SUCCESS The control bits were read from the serial device. + @retval EFI_DEVICE_ERROR The serial device is not functioning correctly. + +**/ +RETURN_STATUS +EFIAPI +SerialPortGetControl ( + OUT UINT32 *Control + ) +{ + if (SerialPortPoll ()) { + // If a character is pending don't set EFI_SERIAL_INPUT_BUFFER_EMPTY + *Control = EFI_SERIAL_OUTPUT_BUFFER_EMPTY; + } else { + *Control = EFI_SERIAL_INPUT_BUFFER_EMPTY | EFI_SERIAL_OUTPUT_BUFFER_EMPTY; + } + return EFI_SUCCESS; +} + +/** + Set the serial device attributes. + + @return Always return RETURN_UNSUPPORTED. + +**/ +RETURN_STATUS +EFIAPI +SerialPortSetAttributes ( + IN UINT64 BaudRate, + IN UINT32 ReceiveFifoDepth, + IN UINT32 Timeout, + IN EFI_PARITY_TYPE Parity, + IN UINT8 DataBits, + IN EFI_STOP_BITS_TYPE StopBits + ) +{ + return RETURN_UNSUPPORTED; +} + diff --git a/EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.inf b/EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.inf new file mode 100644 index 0000000000..2e95405af4 --- /dev/null +++ b/EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.inf @@ -0,0 +1,36 @@ +#/** @file +# Template for Extended Serial Port Library for UEFI drivers +# +# Copyright (c) 2006, Intel Corporation. All rights reserved.
+# Copyright (c) 2012, ARM Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +#**/ + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = TemplateSerialPortExtLib + FILE_GUID = 231fe752-40ac-40b0-8d23-4e341309b964 + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = SerialPortExtLib + + +# +# VALID_ARCHITECTURES = ARM IA32 X64 IPF EBC +# + +[Sources.common] + TemplateSerialPortExtLib.c + +[Packages] + MdePkg/MdePkg.dec + EmbeddedPkg/EmbeddedPkg.dec + diff --git a/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.c b/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.c index 0110189abd..5d9bb073c7 100644 --- a/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.c +++ b/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.c @@ -18,7 +18,6 @@ #include -#include /** @@ -36,65 +35,6 @@ SerialPortInitialize ( return RETURN_UNSUPPORTED; } -/** - Set the serial device control bits. - - @return Always return EFI_UNSUPPORTED. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetControl ( - IN UINT32 Control - ) -{ - return RETURN_UNSUPPORTED; -} - -/** - Get the serial device control bits. - - @param Control Control signals read from the serial device. - - @retval EFI_SUCCESS The control bits were read from the serial device. - @retval EFI_DEVICE_ERROR The serial device is not functioning correctly. - -**/ -RETURN_STATUS -EFIAPI -SerialPortGetControl ( - OUT UINT32 *Control - ) -{ - if (SerialPortPoll ()) { - // If a character is pending don't set EFI_SERIAL_INPUT_BUFFER_EMPTY - *Control = EFI_SERIAL_OUTPUT_BUFFER_EMPTY; - } else { - *Control = EFI_SERIAL_INPUT_BUFFER_EMPTY | EFI_SERIAL_OUTPUT_BUFFER_EMPTY; - } - return EFI_SUCCESS; -} - -/** - Set the serial device attributes. - - @return Always return EFI_UNSUPPORTED. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetAttributes ( - IN OUT UINT64 *BaudRate, - IN OUT UINT32 *ReceiveFifoDepth, - IN OUT UINT32 *Timeout, - IN OUT EFI_PARITY_TYPE *Parity, - IN OUT UINT8 *DataBits, - IN OUT EFI_STOP_BITS_TYPE *StopBits - ) -{ - return RETURN_UNSUPPORTED; -} - /** Write data to serial device. diff --git a/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.inf b/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.inf index 1bc1fc0ee6..f1ece19624 100644 --- a/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.inf +++ b/EmbeddedPkg/Library/TemplateSerialPortLib/TemplateSerialPortLib.inf @@ -1,8 +1,8 @@ #/** @file -# Memory Status Code Library for UEFI drivers +# Template for Serial Port Library for UEFI drivers # -# Lib to provide memory journal status code reporting Routines # Copyright (c) 2006, Intel Corporation. All rights reserved.
+# Copyright (c) 2012, ARM Ltd. All rights reserved.
# # This program and the accompanying materials # are licensed and made available under the terms and conditions of the BSD License @@ -18,13 +18,13 @@ INF_VERSION = 0x00010005 BASE_NAME = TemplateSerialPortLib FILE_GUID = A9133571-AD4B-4457-94A8-A9CC2CE7574F - MODULE_TYPE = PEIM + MODULE_TYPE = BASE VERSION_STRING = 1.0 LIBRARY_CLASS = SerialPortLib # -# VALID_ARCHITECTURES = IA32 X64 IPF EBC +# VALID_ARCHITECTURES = ARM IA32 X64 IPF EBC # [Sources.common] diff --git a/EmbeddedPkg/SerialDxe/SerialDxe.inf b/EmbeddedPkg/SerialDxe/SerialDxe.inf index 37e8e0e008..ed7f377351 100644 --- a/EmbeddedPkg/SerialDxe/SerialDxe.inf +++ b/EmbeddedPkg/SerialDxe/SerialDxe.inf @@ -39,6 +39,7 @@ DebugLib UefiDriverEntryPoint SerialPortLib + SerialPortExtLib [Protocols] gEfiSerialIoProtocolGuid diff --git a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c index 9a70593dbf..2f93140e4c 100644 --- a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c +++ b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -123,57 +122,3 @@ SerialPortPoll ( } } -/** - Set the serial device control bits. - - @return Always return EFI_UNSUPPORTED. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetControl ( - IN UINT32 Control - ) -{ - return RETURN_SUCCESS; -} - -/** - Get the serial device control bits. - - @param Control Control signals read from the serial device. - - @retval EFI_SUCCESS The control bits were read from the serial device. - @retval EFI_DEVICE_ERROR The serial device is not functioning correctly. - -**/ -RETURN_STATUS -EFIAPI -SerialPortGetControl ( - OUT UINT32 *Control - ) -{ - return RETURN_SUCCESS; -} - - -/** - Set the serial device attributes. - - @return Always return EFI_UNSUPPORTED. - -**/ -RETURN_STATUS -EFIAPI -SerialPortSetAttributes ( - IN UINT64 BaudRate, - IN UINT32 ReceiveFifoDepth, - IN UINT32 Timeout, - IN EFI_PARITY_TYPE Parity, - IN UINT8 DataBits, - IN EFI_STOP_BITS_TYPE StopBits - ) -{ - return RETURN_SUCCESS; -} - diff --git a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf index a7d4fadcef..340f4a6a4d 100644 --- a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf +++ b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf @@ -17,13 +17,13 @@ INF_VERSION = 0x00010005 BASE_NAME = BeagleBoardSerialPortLib FILE_GUID = 97546cbd-c0ff-4c48-ab0b-e4f58862acd3 - MODULE_TYPE = PEIM + MODULE_TYPE = BASE VERSION_STRING = 1.0 LIBRARY_CLASS = SerialPortLib # -# VALID_ARCHITECTURES = IA32 X64 IPF EBC +# VALID_ARCHITECTURES = ARM IA32 X64 IPF EBC # [Sources.common] -- cgit v1.2.3