From 1760cf81e4b1847c6823ea3514a78dd120e19b6e Mon Sep 17 00:00:00 2001 From: Guo Mang Date: Thu, 22 Dec 2016 15:57:14 +0800 Subject: MdePkg: Move to new location Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Guo Mang --- Core/MdePkg/Include/Protocol/DriverBinding.h | 201 +++++++++++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 Core/MdePkg/Include/Protocol/DriverBinding.h (limited to 'Core/MdePkg/Include/Protocol/DriverBinding.h') diff --git a/Core/MdePkg/Include/Protocol/DriverBinding.h b/Core/MdePkg/Include/Protocol/DriverBinding.h new file mode 100644 index 0000000000..216ae3c57d --- /dev/null +++ b/Core/MdePkg/Include/Protocol/DriverBinding.h @@ -0,0 +1,201 @@ +/** @file + UEFI DriverBinding Protocol is defined in UEFI specification. + + This protocol is produced by every driver that follows the UEFI Driver Model, + and it is the central component that allows drivers and controllers to be managed. + +Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.
+This program and the accompanying materials are licensed and made available under +the terms and conditions of the BSD License that accompanies this distribution. +The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php. + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __EFI_DRIVER_BINDING_H__ +#define __EFI_DRIVER_BINDING_H__ + +/// +/// The global ID for the ControllerHandle Driver Protocol. +/// +#define EFI_DRIVER_BINDING_PROTOCOL_GUID \ + { \ + 0x18a031ab, 0xb443, 0x4d1a, {0xa5, 0xc0, 0xc, 0x9, 0x26, 0x1e, 0x9f, 0x71 } \ + } + +typedef struct _EFI_DRIVER_BINDING_PROTOCOL EFI_DRIVER_BINDING_PROTOCOL; + +/** + Tests to see if this driver supports a given controller. If a child device is provided, + it further tests to see if this driver supports creating a handle for the specified child device. + + This function checks to see if the driver specified by This supports the device specified by + ControllerHandle. Drivers will typically use the device path attached to + ControllerHandle and/or the services from the bus I/O abstraction attached to + ControllerHandle to determine if the driver supports ControllerHandle. This function + may be called many times during platform initialization. In order to reduce boot times, the tests + performed by this function must be very small, and take as little time as possible to execute. This + function must not change the state of any hardware devices, and this function must be aware that the + device specified by ControllerHandle may already be managed by the same driver or a + different driver. This function must match its calls to AllocatePages() with FreePages(), + AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). + Because ControllerHandle may have been previously started by the same driver, if a protocol is + already in the opened state, then it must not be closed with CloseProtocol(). This is required + to guarantee the state of ControllerHandle is not modified by this function. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle The handle of the controller to test. This handle + must support a protocol interface that supplies + an I/O abstraction to the driver. + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For bus drivers, if this parameter is not NULL, then + the bus driver must determine if the bus controller specified + by ControllerHandle and the child controller specified + by RemainingDevicePath are both supported by this + bus driver. + + @retval EFI_SUCCESS The device specified by ControllerHandle and + RemainingDevicePath is supported by the driver specified by This. + @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and + RemainingDevicePath is already being managed by the driver + specified by This. + @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and + RemainingDevicePath is already being managed by a different + driver or an application that requires exclusive access. + Currently not implemented. + @retval EFI_UNSUPPORTED The device specified by ControllerHandle and + RemainingDevicePath is not supported by the driver specified by This. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DRIVER_BINDING_SUPPORTED)( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ); + +/** + Starts a device controller or a bus controller. + + The Start() function is designed to be invoked from the EFI boot service ConnectController(). + As a result, much of the error checking on the parameters to Start() has been moved into this + common boot service. It is legal to call Start() from other locations, + but the following calling restrictions must be followed, or the system behavior will not be deterministic. + 1. ControllerHandle must be a valid EFI_HANDLE. + 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned + EFI_DEVICE_PATH_PROTOCOL. + 3. Prior to calling Start(), the Supported() function for the driver specified by This must + have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle The handle of the controller to start. This handle + must support a protocol interface that supplies + an I/O abstraction to the driver. + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For a bus driver, if this parameter is NULL, then handles + for all the children of Controller are created by this driver. + If this parameter is not NULL and the first Device Path Node is + not the End of Device Path Node, then only the handle for the + child device specified by the first Device Path Node of + RemainingDevicePath is created by this driver. + If the first Device Path Node of RemainingDevicePath is + the End of Device Path Node, no child handle is created by this + driver. + + @retval EFI_SUCCESS The device was started. + @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. + @retval Others The driver failded to start the device. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DRIVER_BINDING_START)( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ); + +/** + Stops a device controller or a bus controller. + + The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). + As a result, much of the error checking on the parameters to Stop() has been moved + into this common boot service. It is legal to call Stop() from other locations, + but the following calling restrictions must be followed, or the system behavior will not be deterministic. + 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this + same driver's Start() function. + 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid + EFI_HANDLE. In addition, all of these handles must have been created in this driver's + Start() function, and the Start() function must have called OpenProtocol() on + ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle A handle to the device being stopped. The handle must + support a bus specific I/O protocol for the driver + to use to stop the device. + @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. + @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL + if NumberOfChildren is 0. + + @retval EFI_SUCCESS The device was stopped. + @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DRIVER_BINDING_STOP)( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer OPTIONAL + ); + +/// +/// This protocol provides the services required to determine if a driver supports a given controller. +/// If a controller is supported, then it also provides routines to start and stop the controller. +/// +struct _EFI_DRIVER_BINDING_PROTOCOL { + EFI_DRIVER_BINDING_SUPPORTED Supported; + EFI_DRIVER_BINDING_START Start; + EFI_DRIVER_BINDING_STOP Stop; + + /// + /// The version number of the UEFI driver that produced the + /// EFI_DRIVER_BINDING_PROTOCOL. This field is used by + /// the EFI boot service ConnectController() to determine + /// the order that driver's Supported() service will be used when + /// a controller needs to be started. EFI Driver Binding Protocol + /// instances with higher Version values will be used before ones + /// with lower Version values. The Version values of 0x0- + /// 0x0f and 0xfffffff0-0xffffffff are reserved for + /// platform/OEM specific drivers. The Version values of 0x10- + /// 0xffffffef are reserved for IHV-developed drivers. + /// + UINT32 Version; + + /// + /// The image handle of the UEFI driver that produced this instance + /// of the EFI_DRIVER_BINDING_PROTOCOL. + /// + EFI_HANDLE ImageHandle; + + /// + /// The handle on which this instance of the + /// EFI_DRIVER_BINDING_PROTOCOL is installed. In most + /// cases, this is the same handle as ImageHandle. However, for + /// UEFI drivers that produce more than one instance of the + /// EFI_DRIVER_BINDING_PROTOCOL, this value may not be + /// the same as ImageHandle. + /// + EFI_HANDLE DriverBindingHandle; +}; + +extern EFI_GUID gEfiDriverBindingProtocolGuid; + +#endif -- cgit v1.2.3