From 008d25427c5b33e399075dde88bd3667ae3a104d Mon Sep 17 00:00:00 2001 From: lzeng14 Date: Wed, 9 Nov 2011 09:38:56 +0000 Subject: Remove some useless functions for EhciPei driver. Signed-off-by: lzeng14 Reviewed-by: erictian git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12677 6f19259b-4bc3-4df7-8a09-765794883524 --- MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c | 420 ------------------------------- MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h | 82 +----- 2 files changed, 1 insertion(+), 501 deletions(-) (limited to 'MdeModulePkg/Bus') diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c index 8e9dad12d2..1821a278da 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c @@ -287,164 +287,6 @@ EhcUnlinkQhFromAsync ( return; } -/** - Link a queue head for interrupt transfer to the periodic - schedule frame list. This code is very much the same as - that in UHCI. - - @param Ehc The EHCI device. - @param Qh The queue head to link. - -**/ -VOID -EhcLinkQhToPeriod ( - IN PEI_USB2_HC_DEV *Ehc, - IN PEI_EHC_QH *Qh - ) -{ - UINT32 *Frames; - UINTN Index; - PEI_EHC_QH *Prev; - PEI_EHC_QH *Next; - - Frames = Ehc->PeriodFrame; - - for (Index = 0; Index < EHC_FRAME_LEN; Index += Qh->Interval) { - // - // First QH can't be NULL because we always keep PeriodOne - // heads on the frame list - // - ASSERT (!EHC_LINK_TERMINATED (Frames[Index])); - Next = EHC_ADDR (Ehc->High32bitAddr, Frames[Index]); - Prev = NULL; - - // - // Now, insert the queue head (Qh) into this frame: - // 1. Find a queue head with the same poll interval, just insert - // Qh after this queue head, then we are done. - // - // 2. Find the position to insert the queue head into: - // Previous head's interval is bigger than Qh's - // Next head's interval is less than Qh's - // Then, insert the Qh between then - // - while (Next->Interval > Qh->Interval) { - Prev = Next; - Next = Next->NextQh; - } - - ASSERT (Next != NULL); - - // - // The entry may have been linked into the frame by early insertation. - // For example: if insert a Qh with Qh.Interval == 4, and there is a Qh - // with Qh.Interval == 8 on the frame. If so, we are done with this frame. - // It isn't necessary to compare all the QH with the same interval to - // Qh. This is because if there is other QH with the same interval, Qh - // should has been inserted after that at Frames[0] and at Frames[0] it is - // impossible for (Next == Qh) - // - if (Next == Qh) { - continue; - } - - if (Next->Interval == Qh->Interval) { - // - // If there is a QH with the same interval, it locates at - // Frames[0], and we can simply insert it after this QH. We - // are all done. - // - ASSERT ((Index == 0) && (Qh->NextQh == NULL)); - - Prev = Next; - Next = Next->NextQh; - - Qh->NextQh = Next; - Prev->NextQh = Qh; - - Qh->QhHw.HorizonLink = Prev->QhHw.HorizonLink; - Prev->QhHw.HorizonLink = QH_LINK (Qh, EHC_TYPE_QH, FALSE); - break; - } - - // - // OK, find the right position, insert it in. If Qh's next - // link has already been set, it is in position. This is - // guarranted by 2^n polling interval. - // - if (Qh->NextQh == NULL) { - Qh->NextQh = Next; - Qh->QhHw.HorizonLink = QH_LINK (Next, EHC_TYPE_QH, FALSE); - } - - if (Prev == NULL) { - Frames[Index] = QH_LINK (Qh, EHC_TYPE_QH, FALSE); - } else { - Prev->NextQh = Qh; - Prev->QhHw.HorizonLink = QH_LINK (Qh, EHC_TYPE_QH, FALSE); - } - } -} - -/** - Unlink an interrupt queue head from the periodic - schedule frame list. - - @param Ehc The EHCI device. - @param Qh The queue head to unlink. - -**/ -VOID -EhcUnlinkQhFromPeriod ( - IN PEI_USB2_HC_DEV *Ehc, - IN PEI_EHC_QH *Qh - ) -{ - UINT32 *Frames; - UINTN Index; - PEI_EHC_QH *Prev; - PEI_EHC_QH *This; - - Frames = Ehc->PeriodFrame; - - for (Index = 0; Index < EHC_FRAME_LEN; Index += Qh->Interval) { - // - // Frame link can't be NULL because we always keep PeroidOne - // on the frame list - // - ASSERT (!EHC_LINK_TERMINATED (Frames[Index])); - This = EHC_ADDR (Ehc->High32bitAddr, Frames[Index]); - Prev = NULL; - - // - // Walk through the frame's QH list to find the - // queue head to remove - // - while ((This != NULL) && (This != Qh)) { - Prev = This; - This = This->NextQh; - } - - // - // Qh may have already been unlinked from this frame - // by early action. See the comments in EhcLinkQhToPeriod. - // - if (This == NULL) { - continue; - } - - if (Prev == NULL) { - // - // Qh is the first entry in the frame - // - Frames[Index] = Qh->QhHw.HorizonLink; - } else { - Prev->NextQh = Qh->NextQh; - Prev->QhHw.HorizonLink = Qh->QhHw.HorizonLink; - } - } -} - /** Check the URB's execution result and update the URB's result accordingly. @@ -607,265 +449,3 @@ EhcExecTransfer ( return Status; } -/** - Delete a single asynchronous interrupt transfer for - the device and endpoint. - - @param Ehc The EHCI device. - @param DevAddr The address of the target device. - @param EpNum The endpoint of the target. - @param DataToggle Return the next data toggle to use. - - @retval EFI_NOT_FOUND No transfer for the device is found. - @retval EFI_SUCCESS An asynchronous transfer is removed. - -**/ -EFI_STATUS -EhciDelAsyncIntTransfer ( - IN PEI_USB2_HC_DEV *Ehc, - IN UINT8 DevAddr, - IN UINT8 EpNum, - OUT UINT8 *DataToggle - ) -{ - EFI_LIST_ENTRY *Entry; - EFI_LIST_ENTRY *Next; - PEI_URB *Urb; - EFI_USB_DATA_DIRECTION Direction; - - Direction = (((EpNum & 0x80) != 0) ? EfiUsbDataIn : EfiUsbDataOut); - EpNum &= 0x0F; - - EFI_LIST_FOR_EACH_SAFE (Entry, Next, &Ehc->AsyncIntTransfers) { - Urb = EFI_LIST_CONTAINER (Entry, PEI_URB, UrbList); - - if ((Urb->Ep.DevAddr == DevAddr) && (Urb->Ep.EpAddr == EpNum) && - (Urb->Ep.Direction == Direction)) { - // - // Check the URB status to retrieve the next data toggle - // from the associated queue head. - // - EhcCheckUrbResult (Ehc, Urb); - *DataToggle = Urb->DataToggle; - - EhcUnlinkQhFromPeriod (Ehc, Urb->Qh); - RemoveEntryList (&Urb->UrbList); - - EhcFreeUrb (Ehc, Urb); - return EFI_SUCCESS; - } - } - - return EFI_NOT_FOUND; -} - -/** - Remove all the asynchronous interrutp transfers. - - @param Ehc The EHCI device. - -**/ -VOID -EhciDelAllAsyncIntTransfers ( - IN PEI_USB2_HC_DEV *Ehc - ) -{ - EFI_LIST_ENTRY *Entry; - EFI_LIST_ENTRY *Next; - PEI_URB *Urb; - - EFI_LIST_FOR_EACH_SAFE (Entry, Next, &Ehc->AsyncIntTransfers) { - Urb = EFI_LIST_CONTAINER (Entry, PEI_URB, UrbList); - - EhcUnlinkQhFromPeriod (Ehc, Urb->Qh); - RemoveEntryList (&Urb->UrbList); - - EhcFreeUrb (Ehc, Urb); - } -} - -/** - Flush data from PCI controller specific address to mapped system - memory address. - - @param Ehc The EHCI device. - @param Urb The URB to unmap. - - @retval EFI_DEVICE_ERROR Fail to flush data to mapped system memory. - @retval EFI_SUCCESS Success to flush data to mapped system memory. - -**/ -EFI_STATUS -EhcFlushAsyncIntMap ( - IN PEI_USB2_HC_DEV *Ehc, - IN PEI_URB *Urb - ) -{ - EFI_PHYSICAL_ADDRESS PhyAddr; - - Urb->DataMap = NULL; - PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Urb->Data; - Urb->DataPhy = (VOID *) ((UINTN) PhyAddr); - return EFI_SUCCESS; -} - -/** - Update the queue head for next round of asynchronous transfer. - - @param Urb The URB to update. - -**/ -VOID -EhcUpdateAsyncRequest ( - IN PEI_URB *Urb - ) -{ - EFI_LIST_ENTRY *Entry; - PEI_EHC_QTD *FirstQtd; - QH_HW *QhHw; - PEI_EHC_QTD *Qtd; - QTD_HW *QtdHw; - UINTN Index; - - Qtd = NULL; - - if (Urb->Result == EFI_USB_NOERROR) { - FirstQtd = NULL; - - EFI_LIST_FOR_EACH (Entry, &Urb->Qh->Qtds) { - Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList); - - if (FirstQtd == NULL) { - FirstQtd = Qtd; - } - - // - // Update the QTD for next round of transfer. Host control - // may change dt/Total Bytes to Transfer/C_Page/Cerr/Status/ - // Current Offset. These fields need to be updated. DT isn't - // used by interrupt transfer. It uses DT in queue head. - // Current Offset is in Page[0], only need to reset Page[0] - // to initial data buffer. - // - QtdHw = &Qtd->QtdHw; - QtdHw->Status = QTD_STAT_ACTIVE; - QtdHw->ErrCnt = QTD_MAX_ERR; - QtdHw->CurPage = 0; - QtdHw->TotalBytes = (UINT32) Qtd->DataLen; - QtdHw->Page[0] = EHC_LOW_32BIT (Qtd->Data); - } - - // - // Update QH for next round of transfer. Host control only - // touch the fields in transfer overlay area. Only need to - // zero out the overlay area and set NextQtd to the first - // QTD. DateToggle bit is left untouched. - // - QhHw = &Urb->Qh->QhHw; - QhHw->CurQtd = QTD_LINK (0, TRUE); - QhHw->AltQtd = 0; - - QhHw->Status = 0; - QhHw->Pid = 0; - QhHw->ErrCnt = 0; - QhHw->CurPage = 0; - QhHw->Ioc = 0; - QhHw->TotalBytes = 0; - - for (Index = 0; Index < 5; Index++) { - QhHw->Page[Index] = 0; - QhHw->PageHigh[Index] = 0; - } - - QhHw->NextQtd = QTD_LINK (FirstQtd, FALSE); - } - - return ; -} - -/** - Remove all the asynchronous interrutp transfers. - - @param Event Interrupt event. - @param Context Pointer to PEI_USB2_HC_DEV. - -**/ -VOID -EFIAPI -EhcMoniteAsyncRequests ( - IN EFI_EVENT Event, - IN VOID *Context - ) -{ - PEI_USB2_HC_DEV *Ehc; - EFI_LIST_ENTRY *Entry; - EFI_LIST_ENTRY *Next; - BOOLEAN Finished; - UINT8 *ProcBuf; - PEI_URB *Urb; - UINTN PageNumber; - - Ehc = (PEI_USB2_HC_DEV *) Context; - - EFI_LIST_FOR_EACH_SAFE (Entry, Next, &Ehc->AsyncIntTransfers) { - Urb = EFI_LIST_CONTAINER (Entry, PEI_URB, UrbList); - - // - // Check the result of URB execution. If it is still - // active, check the next one. - // - Finished = EhcCheckUrbResult (Ehc, Urb); - - if (!Finished) { - continue; - } - - // - // Flush any PCI posted write transactions from a PCI host - // bridge to system memory. - // - EhcFlushAsyncIntMap (Ehc, Urb); - - // - // Allocate a buffer then copy the transferred data for user. - // If failed to allocate the buffer, update the URB for next - // round of transfer. Ignore the data of this round. - // - ProcBuf = NULL; - - if (Urb->Result == EFI_USB_NOERROR) { - ASSERT (Urb->Completed <= Urb->DataLen); - PageNumber = Urb->Completed/PAGESIZE +1; - PeiServicesAllocatePages ( - EfiBootServicesCode, - PageNumber, - (EFI_PHYSICAL_ADDRESS *)ProcBuf - ); - if (ProcBuf == NULL) { - EhcUpdateAsyncRequest (Urb); - continue; - } - - CopyMem (ProcBuf, Urb->Data, Urb->Completed); - } - - EhcUpdateAsyncRequest (Urb); - - // - // Leave error recovery to its related device driver. A - // common case of the error recovery is to re-submit the - // interrupt transfer which is linked to the head of the - // list. This function scans from head to tail. So the - // re-submitted interrupt transfer's callback function - // will not be called again in this round. Don't touch this - // URB after the callback, it may have been removed by the - // callback. - // - if (Urb->Callback != NULL) { - (Urb->Callback) (ProcBuf, Urb->Completed, Urb->Context, Urb->Result); - } - - if (ProcBuf != NULL) { - } - } -} diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h index 0eb90f86d1..6cc52f8d0a 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h @@ -1,7 +1,7 @@ /** @file Private Header file for Usb Host Controller PEIM -Copyright (c) 2010, Intel Corporation. All rights reserved.
+Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions @@ -77,37 +77,6 @@ EhcUnlinkQhFromAsync ( ) ; -/** - Link a queue head for interrupt transfer to the periodic - schedule frame list. This code is very much the same as - that in UHCI. - - @param Ehc The EHCI device. - @param Qh The queue head to link. - -**/ -VOID -EhcLinkQhToPeriod ( - IN PEI_USB2_HC_DEV *Ehc, - IN PEI_EHC_QH *Qh - ) -; - -/** - Unlink an interrupt queue head from the periodic - schedule frame list. - - @param Ehc The EHCI device. - @param Qh The queue head to unlink. - -**/ -VOID -EhcUnlinkQhFromPeriod ( - IN PEI_USB2_HC_DEV *Ehc, - IN PEI_EHC_QH *Qh - ) -; - /** Execute the transfer by polling the URB. This is a synchronous operation. @@ -128,53 +97,4 @@ EhcExecTransfer ( ) ; -/** - Delete a single asynchronous interrupt transfer for - the device and endpoint. - - @param Ehc The EHCI device. - @param DevAddr The address of the target device. - @param EpNum The endpoint of the target. - @param DataToggle Return the next data toggle to use. - - @retval EFI_NOT_FOUND No transfer for the device is found. - @retval EFI_SUCCESS An asynchronous transfer is removed. - -**/ -EFI_STATUS -EhciDelAsyncIntTransfer ( - IN PEI_USB2_HC_DEV *Ehc, - IN UINT8 DevAddr, - IN UINT8 EpNum, - OUT UINT8 *DataToggle - ) -; - -/** - Remove all the asynchronous interrutp transfers. - - @param Ehc The EHCI device. - -**/ -VOID -EhciDelAllAsyncIntTransfers ( - IN PEI_USB2_HC_DEV *Ehc - ) -; - -/** - Remove all the asynchronous interrutp transfers. - - @param Event Interrupt event. - @param Context Pointer to PEI_USB2_HC_DEV. - -**/ -VOID -EFIAPI -EhcMoniteAsyncRequests ( - IN EFI_EVENT Event, - IN VOID *Context - ) -; - #endif -- cgit v1.2.3