From 167c3fb45674c274219b3af0bc811992cd4d6116 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 5 Sep 2016 09:51:16 +0100 Subject: MdeModulePkg/EhciDxe: enable 64-bit PCI DMA PCI controller drivers must set the EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute if the controller supports 64-bit DMA addressing. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel Reviewed-by: Laszlo Ersek Reviewed-by: Feng Tian --- MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c | 22 +++++++++++++++++++++- MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h | 2 ++ MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c | 2 +- 3 files changed, 24 insertions(+), 2 deletions(-) (limited to 'MdeModulePkg/Bus') diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c index 4e9e05f0e4..c7a6a400cf 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c @@ -89,7 +89,7 @@ EhcGetCapability ( *MaxSpeed = EFI_USB_SPEED_HIGH; *PortNumber = (UINT8) (Ehc->HcStructParams & HCSP_NPORTS); - *Is64BitCapable = (UINT8) (Ehc->HcCapParams & HCCP_64BIT); + *Is64BitCapable = (UINT8) Ehc->Support64BitDma; DEBUG ((EFI_D_INFO, "EhcGetCapability: %d ports, 64 bit %d\n", *PortNumber, *Is64BitCapable)); @@ -1877,6 +1877,26 @@ EhcDriverBindingStart ( goto CLOSE_PCIIO; } + // + // Enable 64-bit DMA support in the PCI layer if this controller + // supports it. + // + if (EHC_BIT_IS_SET (Ehc->HcCapParams, HCCP_64BIT)) { + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationEnable, + EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE, + NULL + ); + if (!EFI_ERROR (Status)) { + Ehc->Support64BitDma = TRUE; + } else { + DEBUG ((EFI_D_WARN, + "%a: failed to enable 64-bit DMA on 64-bit capable controller @ %p (%r)\n", + __FUNCTION__, Controller, Status)); + } + } + Status = gBS->InstallProtocolInterface ( &Controller, &gEfiUsb2HcProtocolGuid, diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h index 7177658092..be81bde40d 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h +++ b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h @@ -173,6 +173,8 @@ struct _USB2_HC_DEV { UINT16 DebugPortOffset; // The offset of debug port mmio register UINT8 DebugPortBarNum; // The bar number of debug port mmio register UINT8 DebugPortNum; // The port number of usb debug port + + BOOLEAN Support64BitDma; // Whether 64 bit DMA may be used with this device }; diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c index 5594e6699e..036c00b32b 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c @@ -178,7 +178,7 @@ EhcInitSched ( // Ehc->MemPool = UsbHcInitMemPool ( PciIo, - EHC_BIT_IS_SET (Ehc->HcCapParams, HCCP_64BIT), + Ehc->Support64BitDma, EHC_HIGH_32BIT (PhyAddr) ); -- cgit v1.2.3