From 4c5a5e0cfecf23526493bf9a05c0530805bf10ec Mon Sep 17 00:00:00 2001 From: tye1 Date: Wed, 17 Aug 2011 02:38:08 +0000 Subject: Add IScsiDxe driver to NetworkPkg in order to support iSCSI over IPv6 stack and iSCSI MPIO. Signed-off-by: tye1 Reviewed-by: hhuan13 Reviewed-by: eric_tian git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12149 6f19259b-4bc3-4df7-8a09-765794883524 --- NetworkPkg/IScsiDxe/IScsiCHAP.h | 113 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 NetworkPkg/IScsiDxe/IScsiCHAP.h (limited to 'NetworkPkg/IScsiDxe/IScsiCHAP.h') diff --git a/NetworkPkg/IScsiDxe/IScsiCHAP.h b/NetworkPkg/IScsiDxe/IScsiCHAP.h new file mode 100644 index 0000000000..d71db2c655 --- /dev/null +++ b/NetworkPkg/IScsiDxe/IScsiCHAP.h @@ -0,0 +1,113 @@ +/** @file + The header file of CHAP configuration. + +Copyright (c) 2004 - 2011, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _ISCSI_CHAP_H_ +#define _ISCSI_CHAP_H_ + +#define ISCSI_CHAP_AUTH_INFO_GUID \ + { \ + 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }\ + } + +#define ISCSI_AUTH_METHOD_CHAP "CHAP" + +#define ISCSI_KEY_CHAP_ALGORITHM "CHAP_A" +#define ISCSI_KEY_CHAP_IDENTIFIER "CHAP_I" +#define ISCSI_KEY_CHAP_CHALLENGE "CHAP_C" +#define ISCSI_KEY_CHAP_NAME "CHAP_N" +#define ISCSI_KEY_CHAP_RESPONSE "CHAP_R" + +#define ISCSI_CHAP_ALGORITHM_MD5 5 + +#define ISCSI_CHAP_AUTH_MAX_LEN 1024 +/// +/// MD5_HASHSIZE +/// +#define ISCSI_CHAP_RSP_LEN 16 + +#define ISCSI_CHAP_STEP_ONE 1 +#define ISCSI_CHAP_STEP_TWO 2 +#define ISCSI_CHAP_STEP_THREE 3 +#define ISCSI_CHAP_STEP_FOUR 4 + + +#pragma pack(1) + +typedef struct _ISCSI_CHAP_AUTH_CONFIG_NVDATA { + UINT8 CHAPType; + CHAR8 CHAPName[ISCSI_CHAP_NAME_STORAGE]; + CHAR8 CHAPSecret[ISCSI_CHAP_SECRET_STORAGE]; + CHAR8 ReverseCHAPName[ISCSI_CHAP_NAME_STORAGE]; + CHAR8 ReverseCHAPSecret[ISCSI_CHAP_SECRET_STORAGE]; +} ISCSI_CHAP_AUTH_CONFIG_NVDATA; + +#pragma pack() + +/// +/// ISCSI CHAP Authentication Data +/// +typedef struct _ISCSI_CHAP_AUTH_DATA { + ISCSI_CHAP_AUTH_CONFIG_NVDATA *AuthConfig; + UINT32 InIdentifier; + UINT8 InChallenge[ISCSI_CHAP_AUTH_MAX_LEN]; + UINT32 InChallengeLength; + // + // Calculated CHAP Response (CHAP_R) value. + // + UINT8 CHAPResponse[ISCSI_CHAP_RSP_LEN]; + + // + // Auth-data to be sent out for mutual authentication. + // + UINT32 OutIdentifier; + UINT8 OutChallenge[ISCSI_CHAP_AUTH_MAX_LEN]; + UINT32 OutChallengeLength; +} ISCSI_CHAP_AUTH_DATA; + +/** + This function checks the received iSCSI Login Response during the security + negotiation stage. + + @param[in] Conn The iSCSI connection. + + @retval EFI_SUCCESS The Login Response passed the CHAP validation. + @retval EFI_OUT_OF_RESOURCES Failed to allocate memory. + @retval EFI_PROTOCOL_ERROR Some kind of protocol error occurred. + @retval Others Other errors as indicated. + +**/ +EFI_STATUS +IScsiCHAPOnRspReceived ( + IN ISCSI_CONNECTION *Conn + ); +/** + This function fills the CHAP authentication information into the login PDU + during the security negotiation stage in the iSCSI connection login. + + @param[in] Conn The iSCSI connection. + @param[in, out] Pdu The PDU to send out. + + @retval EFI_SUCCESS All check passed and the phase-related CHAP + authentication info is filled into the iSCSI PDU. + @retval EFI_OUT_OF_RESOURCES Failed to allocate memory. + @retval EFI_PROTOCOL_ERROR Some kind of protocol error occurred. + +**/ +EFI_STATUS +IScsiCHAPToSendReq ( + IN ISCSI_CONNECTION *Conn, + IN OUT NET_BUF *Pdu + ); + +#endif -- cgit v1.2.3