From 41f80fbd9905cdc9a457e3cdf8110539f948c6b9 Mon Sep 17 00:00:00 2001 From: Gabriel Somlo Date: Tue, 9 Sep 2014 03:18:30 +0000 Subject: OvmfPkg: AcpiTimerLib: Access power mgmt regs based on host bridge type Pick the appropriate bus:dev.fn for accessing ACPI power management registers (00:01.3 on PIIX4 vs. 00:1f.0 on Q35) based on the device ID of the host bridge (assumed always present at 00:00.0). With this patch, OVMF can boot QEMU's "-machine q35" x86 machine type. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo Reviewed-by: Laszlo Ersek Reviewed-by: Jordan Justen git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16066 6f19259b-4bc3-4df7-8a09-765794883524 --- OvmfPkg/Library/AcpiTimerLib/AcpiTimerLib.c | 71 +++++++++++++++++++++++++---- 1 file changed, 63 insertions(+), 8 deletions(-) (limited to 'OvmfPkg/Library/AcpiTimerLib/AcpiTimerLib.c') diff --git a/OvmfPkg/Library/AcpiTimerLib/AcpiTimerLib.c b/OvmfPkg/Library/AcpiTimerLib/AcpiTimerLib.c index c6441281b4..7d324cb815 100644 --- a/OvmfPkg/Library/AcpiTimerLib/AcpiTimerLib.c +++ b/OvmfPkg/Library/AcpiTimerLib/AcpiTimerLib.c @@ -43,20 +43,75 @@ ) // -// PIIX4 Power Management PCI Configuration Registers +// PCI Location of Q35 Power Management PCI Configuration Registers // -#define PMBA PIIX4_PCI_POWER_MANAGEMENT_REGISTER (0x40) +#define Q35_POWER_MANAGEMENT_BUS 0x00 +#define Q35_POWER_MANAGEMENT_DEVICE 0x1f +#define Q35_POWER_MANAGEMENT_FUNCTION 0x00 + +// +// Macro to access Q35 Power Management PCI Configuration Registers +// +#define Q35_PCI_POWER_MANAGEMENT_REGISTER(Register) \ + PCI_LIB_ADDRESS ( \ + Q35_POWER_MANAGEMENT_BUS, \ + Q35_POWER_MANAGEMENT_DEVICE, \ + Q35_POWER_MANAGEMENT_FUNCTION, \ + Register \ + ) + +// +// PCI Location of Host Bridge PCI Configuration Registers +// +#define HOST_BRIDGE_BUS 0x00 +#define HOST_BRIDGE_DEVICE 0x00 +#define HOST_BRIDGE_FUNCTION 0x00 + +// +// Macro to access Host Bridge Configuration Registers +// +#define HOST_BRIDGE_REGISTER(Register) \ + PCI_LIB_ADDRESS ( \ + HOST_BRIDGE_BUS, \ + HOST_BRIDGE_DEVICE, \ + HOST_BRIDGE_FUNCTION, \ + Register \ + ) + +// +// Host Bridge Device ID (DID) Register +// +#define HOST_BRIDGE_DID HOST_BRIDGE_REGISTER (0x02) + +// +// Host Bridge DID Register values +// +#define PCI_DEVICE_ID_INTEL_82441 0x1237 // DID value for PIIX4 +#define PCI_DEVICE_ID_INTEL_Q35_MCH 0x29C0 // DID value for Q35 + +// +// Access Power Management PCI Config Regs based on Host Bridge type +// +#define PCI_POWER_MANAGEMENT_REGISTER(Register) \ + ((PciRead16 (HOST_BRIDGE_DID) == PCI_DEVICE_ID_INTEL_Q35_MCH) ? \ + Q35_PCI_POWER_MANAGEMENT_REGISTER (Register) : \ + PIIX4_PCI_POWER_MANAGEMENT_REGISTER (Register)) + +// +// Power Management PCI Configuration Registers +// +#define PMBA PCI_POWER_MANAGEMENT_REGISTER (0x40) #define PMBA_RTE BIT0 -#define PMREGMISC PIIX4_PCI_POWER_MANAGEMENT_REGISTER (0x80) +#define PMREGMISC PCI_POWER_MANAGEMENT_REGISTER (0x80) #define PMIOSE BIT0 // -// The ACPI Time in the PIIX4 is a 24-bit counter +// The ACPI Time is a 24-bit counter // #define ACPI_TIMER_COUNT_SIZE BIT24 // -// Offset in the PIIX4 Power Management Base Address to the ACPI Timer +// Offset in the Power Management Base Address to the ACPI Timer // #define ACPI_TIMER_OFFSET 0x8 @@ -76,12 +131,12 @@ AcpiTimerLibConstructor ( ) { // - // Check to see if the PIIX4 Power Management Base Address is already enabled + // Check to see if the Power Management Base Address is already enabled // if ((PciRead8 (PMREGMISC) & PMIOSE) == 0) { // - // If the PIIX4 Power Management Base Address is not programmed, - // then program the PIIX4 Power Management Base Address from a PCD. + // If the Power Management Base Address is not programmed, + // then program the Power Management Base Address from a PCD. // PciAndThenOr32 (PMBA, (UINT32)(~0x0000FFC0), PcdGet16 (PcdAcpiPmBaseAddress)); -- cgit v1.2.3