/** @file The EFI Legacy BIOS Patform Protocol is used to mate a Legacy16 implementation with this EFI code. The EFI driver that produces the Legacy BIOS protocol is generic and consumes this protocol. A driver that matches the Legacy16 produces this protocol Copyright (c) 2007,2009 Intel Corporation All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Module Name: LegacyBiosPlatform.h @par Revision Reference: This protocol is defined in Framework for EFI Compatibility Support Module spec Version 0.97. **/ #ifndef _EFI_LEGACY_BIOS_PLATFORM_H_ #define _EFI_LEGACY_BIOS_PLATFORM_H_ #include #define EFI_LEGACY_BIOS_PLATFORM_PROTOCOL_GUID \ { \ 0x783658a3, 0x4172, 0x4421, {0xa2, 0x99, 0xe0, 0x9, 0x7, 0x9c, 0xc, 0xb4 } \ } typedef struct _EFI_LEGACY_BIOS_PLATFORM_PROTOCOL EFI_LEGACY_BIOS_PLATFORM_PROTOCOL; /** This enum specifies the Mode param values for GetPlatformInfo() **/ typedef enum { /// /// This mode is invoked twice. The first invocation has LegacySegment and /// LegacyOffset set to 0. The mode returns the MP table address in EFI memory and its size. /// The second invocation has LegacySegment and LegacyOffset set to the location /// in the 0xF0000 or 0xE0000 block to which the MP table is to be copied. The second /// invocation allows any MP table address fix ups to occur in the EFI memory copy of the /// MP table. The caller, not EfiGetPlatformBinaryMpTable, copies the modified MP /// table to the allocated region in 0xF0000 or 0xE0000 block after the second invocation. /// /// The function parameters associated with this mode are: /// /// Table Pointer to the MP table. /// /// TableSize Size in bytes of the MP table. /// /// Location Location to place table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks. /// Bit 0 = 1 0xF0000 64 KB block. /// Bit 1 = 1 0xE0000 64 KB block. /// Multiple bits can be set. /// /// Alignment Bit mapped address alignment granularity. /// The first nonzero bit from the right is the address granularity. /// /// LegacySegment Segment where EfiCompatibility code will place the MP table. /// /// LegacyOffset Offset where EfiCompatibility code will place the MP table. /// /// The return values associated with this mode are: /// /// EFI_SUCCESS The MP table was returned. /// /// EFI_UNSUPPORTED The MP table is not supported on this platform. /// EfiGetPlatformBinaryMpTable = 0, /// /// This mode returns a block of data. The contents and usage is IBV or OEM defined. /// OEMs or IBVs normally use this function for nonstandard Compatibility16 runtime soft /// INTs. It is the responsibility of this routine to coalesce multiple OEM 16 bit functions, if /// they exist, into one coherent package that is understandable by the Compatibility16 code. /// This function is invoked twice. The first invocation has LegacySegment and /// LegacyOffset set to 0. The function returns the table address in EFI memory and its size. /// The second invocation has LegacySegment and LegacyOffset set to the location /// in the 0xF0000 or 0xE0000 block to which the data (table) is to be copied. The second /// invocation allows any data (table) address fix ups to occur in the EFI memory copy of /// the table. The caller, not GetOemIntData(), copies the modified data (table) to the /// allocated region in 0xF0000 or 0xE0000 block after the second invocation. /// /// The function parameters associated with this mode are: /// /// Table Pointer to OEM legacy 16 bit code or data. /// /// TableSize Size of data. /// /// Location Location to place table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks. /// Bit 0 = 1 0xF0000 64 KB block. /// Bit 1 = 1 0xE0000 64 KB block. /// Multiple bits can be set. /// /// Alignment Bit mapped address alignment granularity. /// The first nonzero bit from the right is the address granularity. /// /// LegacySegment Segment where EfiCompatibility code will place the table or data. /// /// LegacyOffset Offset where EfiCompatibility code will place the table or data. /// /// The return values associated with this mode are: /// /// EFI_SUCCESS The data was returned successfully. /// /// EFI_UNSUPPORTED Oem INT is not supported on this platform. /// EfiGetPlatformBinaryOemIntData = 1, /// /// This mode returns a block of data. The contents and usage is IBV defined. OEMs or /// IBVs normally use this mode for nonstandard Compatibility16 runtime 16 bit routines. It /// is the responsibility of this routine to coalesce multiple OEM 16 bit functions, if they /// exist, into one coherent package that is understandable by the Compatibility16 code. /// An example usage might be a legacy mobile BIOS that has a pre existing runtime /// interface to return the battery status to calling applications. /// This mode is invoked twice. The first invocation has LegacySegment and /// LegacyOffset set to 0. The mode returns the table address in EFI memory and its size. /// The second invocation has LegacySegment and LegacyOffset set to the location /// in the 0xF0000 or 0xE0000 block to which the table is to be copied. The second /// invocation allows any table address fix ups to occur in the EFI memory copy of the table. /// The caller, not EfiGetPlatformBinaryOem16Data, copies the modified table to /// the allocated region in 0xF0000 or 0xE0000 block after the second invocation. /// /// The function parameters associated with this mode are: /// /// Table Pointer to OEM legacy 16 bit code or data. /// /// TableSize Size of data. /// /// Location Location to place the table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks. /// Bit 0 = 1 0xF0000 64 KB block. /// Bit 1 = 1 0xE0000 64 KB block. /// Multiple bits can be set. /// /// Alignment Bit mapped address alignment granularity. /// The first nonzero bit from the right is the address granularity. /// /// LegacySegment Segment where EfiCompatibility code will place the table or data. /// /// LegacyOffset Offset where EfiCompatibility code will place the table or data. /// /// The return values associated with this mode are: /// /// EFI_SUCCESS The data was returned successfully. /// /// EFI_UNSUPPORTED Oem16 is not supported on this platform. /// EfiGetPlatformBinaryOem16Data = 2, /// /// This mode returns a block of data. The contents and usage is IBV defined. OEMs or /// IBVs normally use this mode for nonstandard Compatibility16 runtime 32 bit routines. It /// is the responsibility of this routine to coalesce multiple OEM 32 bit functions, if they /// exist, into one coherent package that is understandable by the Compatibility16 code. /// An example usage might be a legacy mobile BIOS that has a pre existing runtime /// interface to return the battery status to calling applications. /// This mode is invoked twice. The first invocation has LegacySegment and /// LegacyOffset set to 0. The mode returns the table address in EFI memory and its size. /// /// The second invocation has LegacySegment and LegacyOffset set to the location /// in the 0xF0000 or 0xE0000 block to which the table is to be copied. The second /// invocation allows any table address fix ups to occur in the EFI memory copy of the table. /// The caller, not EfiGetPlatformBinaryOem32Data, copies the modified table to /// the allocated region in 0xF0000 or 0xE0000 block after the second invocation.. /// /// Note: There are two generic mechanisms by which this mode can be used. /// - Mechanism 1: This mode returns the data and the Legacy BIOS Protocol copies /// the data into the F0000 or E0000 block in the Compatibility16 code. The /// EFI_COMPATIBILITY16_TABLE entries Oem32Segment and Oem32Offset can /// be viewed as two UINT16 entries. /// - Mechanism 2: This mode directly fills in the EFI_COMPATIBILITY16_TABLE with /// a pointer to the INT15 E820 region containing the 32 bit code. It returns /// EFI_UNSUPPORTED. The EFI_COMPATIBILITY16_TABLE entries, /// Oem32Segment and Oem32Offset, can be viewed as two UINT16 entries or /// as a single UINT32 entry as determined by the IBV. /// /// The function parameters associated with this mode are: /// /// TableSize Size of data. /// /// Location Location to place the table. 0x00 – Either 0xE0000 or 0xF0000 64 KB blocks. /// Bit 0 = 1 0xF0000 64 KB block. /// Bit 1 = 1 0xE0000 64 KB block. /// Multiple bits can be set. /// /// Alignment Bit mapped address alignment granularity. /// The first nonzero bit from the right is the address granularity. /// /// LegacySegment Segment where EfiCompatibility code will place the table or data. /// /// LegacyOffset Offset where EfiCompatibility code will place the table or data. /// /// The return values associated with this mode are: /// EFI_SUCCESS The data was returned successfully. /// EFI_UNSUPPORTED Oem32 is not supported on this platform. /// EfiGetPlatformBinaryOem32Data = 3, /// /// This mode returns a TPM binary image for the onboard TPM device. /// /// The function parameters associated with this mode are: /// /// Table TPM binary image for the onboard TPM device. /// /// TableSize Size of BinaryImage in bytes. /// /// Location Location to place the table. 0x00. Either 0xE0000 or 0xF0000 64 KB blocks. /// Bit 0 = 1 0xF0000 64 KB block. /// Bit 1 = 1 0xE0000 64 KB block. /// Multiple bits can be set. /// /// Alignment Bit mapped address alignment granularity. /// The first nonzero bit from the right is the address granularity. /// /// LegacySegment Segment where EfiCompatibility code will place the table or data. /// /// LegacyOffset Offset where EfiCompatibility code will place the table or data. /// /// The return values associated with this mode are: /// /// EFI_SUCCESS BinaryImage is valid. /// /// EFI_UNSUPPORTED Mode is not supported on this platform. /// /// EFI_NOT_FOUND No BinaryImage was found. /// EfiGetPlatformBinaryTpmBinary = 4, /// /// The mode finds the Compatibility16 “ROM” image. /// /// The function parameters associated with this mode are: /// /// System ROM image for the platform /// /// TableSize Size of Table in bytes /// /// Location Ignored /// /// Alignment Ignored /// /// LegacySegment Ignored /// /// LegacyOffset Ignored /// /// The return values associated with this mode are: /// /// EFI_SUCCESS ROM image found. /// /// EFI_NOT_FOUND ROM not found. /// EfiGetPlatformBinarySystemRom = 5, /// /// This mode returns the Base address of PciExpress memory mapped configuration /// address space. /// /// The function parameters associated with this mode are: /// /// Table System ROM image for the platform /// /// TableSize Size of Table in bytes /// /// Location Ignored /// /// Alignment Ignored /// /// LegacySegment Ignored /// /// LegacyOffset Ignored /// /// The return values associated with this mode are: /// /// EFI_SUCCESS Address is valid. /// /// EFI_UNSUPPORTED System does not PciExpress. /// EfiGetPlatformPciExpressBase = 6, /// EfiGetPlatformPmmSize = 7, /// EfiGetPlatformEndOpromShadowAddr = 8, /// } EFI_GET_PLATFORM_INFO_MODE; /** This enum specifies the Mode param values for GetPlatformHandle() **/ typedef enum { /// /// This mode returns the Compatibility16 policy for the device that should be the VGA /// controller used during a Compatibility16 boot. /// /// The function parameters associated with this mode are: /// /// Type 0x00 /// /// HandleBuffer Buffer of all VGA handles found. /// /// HandleCount Number of VGA handles found. /// /// AdditionalData NULL /// EfiGetPlatformVgaHandle = 0, /// /// This mode returns the Compatibility16 policy for the device that should be the IDE /// controller used during a Compatibility16 boot. /// /// The function parameters associated with this mode are: /// /// Type 0x00 /// /// HandleBuffer Buffer of all IDE handles found. /// /// HandleCount Number of IDE handles found /// /// AdditionalData Pointer to HddInfo. /// Information about all onboard IDE controllers. /// EfiGetPlatformIdeHandle = 1, /// /// This mode returns the Compatibility16 policy for the device that should be the ISA bus /// controller used during a Compatibility16 boot. /// /// The function parameters associated with this mode are: /// /// Type 0x00 /// /// HandleBuffer Buffer of all ISA bus handles found. /// /// HandleCount Number of ISA bus handles found. /// /// AdditionalData NULL /// EfiGetPlatformIsaBusHandle = 2, /// /// This mode returns the Compatibility16 policy for the device that should be the USB /// device used during a Compatibility16 boot. /// /// The function parameters associated with this mode are: /// /// Type 0x00 /// /// HandleBuffer Buffer of all USB handles found. /// /// HandleCount Number of USB bus handles found. /// /// AdditionalData NULL /// EfiGetPlatformUsbHandle = 3 } EFI_GET_PLATFORM_HANDLE_MODE; /** This enum specifies the Mode param values for PlatformHooks() Note: Any OEM defined hooks start with 0x8000 **/ typedef enum { /// /// This mode allows any preprocessing before scanning OpROMs. /// /// The function parameters associated with this mode are: /// /// Type 0 /// /// DeviceHandle Handle of device OpROM is associated with. /// /// ShadowAddress Address where OpROM is shadowed. /// /// Compatibility16Table NULL /// /// AdditionalData NULL /// EfiPlatformHookPrepareToScanRom = 0, /// /// This mode shadows legacy OpROMS that may not have a physical device associated with /// them. It returns EFI_SUCCESS if the ROM was shadowed. /// /// The function parameters associated with this mode are: /// /// Type 0 /// /// DeviceHandle 0 /// /// ShadowAddress First free OpROM area, after other OpROMs have been dispatched.. /// /// Compatibility16Table Pointer to the Compatability16 Table. /// /// AdditionalData NULL /// EfiPlatformHookShadowServiceRoms= 1, /// /// This mode allows platform to perform any required operation after an OpROM has /// completed its initialization. /// /// The function parameters associated with this mode are: /// /// Type 0 /// /// DeviceHandle Handle of device OpROM is associated with. /// /// ShadowAddress Address where OpROM is shadowed. /// /// Compatibility16Table NULL /// /// AdditionalData NULL /// EfiPlatformHookAfterRomInit = 2 } EFI_GET_PLATFORM_HOOK_MODE; // // // /// /// This IRQ has not been assigned to PCI. /// #define PCI_UNUSED 0x00 /// /// This IRQ has been assigned to PCI. /// #define PCI_USED 0xFF /// /// This IRQ has been used by an SIO legacy device and cannot be used by PCI. /// #pragma pack(1) // // // typedef struct { /// /// IRQ for this entry. /// UINT8 Irq; /// /// Status of this IRQ. /// /// PCI_UNUSED 0x00. This IRQ has not been assigned to PCI. /// /// PCI_USED 0xFF. This IRQ has been assigned to PCI. /// /// LEGACY_USED 0xFE. This IRQ has been used by an SIO legacy /// device and cannot be used by PCI. /// UINT8 Used; } EFI_LEGACY_IRQ_PRIORITY_TABLE_ENTRY; // // Define PIR table structures // #define EFI_LEGACY_PIRQ_TABLE_SIGNATURE SIGNATURE_32 ('$', 'P', 'I', 'R') typedef struct { /// /// $PIR. /// UINT32 Signature; /// /// 0x00. /// UINT8 MinorVersion; /// /// 0x01 for table version 1.0. /// UINT8 MajorVersion; /// /// 0x20 + RoutingTableEntries * 0x10. /// UINT16 TableSize; /// /// PCI interrupt router bus. /// UINT8 Bus; /// /// PCI interrupt router device/function. /// UINT8 DevFun; /// /// If nonzero, bit map of IRQs reserved for PCI. /// UINT16 PciOnlyIrq; /// /// Vendor ID of a compatible PCI interrupt router. /// UINT16 CompatibleVid; /// /// Device ID of a compatible PCI interrupt router. /// UINT16 CompatibleDid; /// /// If nonzero, a value passed directly to the IRQ miniport’s Initialize function. /// UINT32 Miniport; /// /// Reserved for future usage. /// UINT8 Reserved[11]; /// /// This byte plus the sum of all other bytes in the LocalPirqTable equal 0x00. /// UINT8 Checksum; } EFI_LEGACY_PIRQ_TABLE_HEADER; typedef struct { /// /// IRQ for this entry. /// UINT8 Pirq; /// /// Status of this IRQ. /// /// PCI_UNUSED 0x00. This IRQ has not been assigned to PCI. /// /// PCI_USED 0xFF. This IRQ has been assigned to PCI. /// /// LEGACY_USED 0xFE. This IRQ has been used by an SIO legacy /// device and cannot be used by PCI. /// UINT16 IrqMask; } EFI_LEGACY_PIRQ_ENTRY; typedef struct { /// /// PCI bus of the entry. /// UINT8 Bus; /// /// PCI device of this entry. /// UINT8 Device; /// /// An IBV value and IRQ mask for PIRQ pins A through D. /// EFI_LEGACY_PIRQ_ENTRY PirqEntry[4]; /// /// If nonzero, the slot number assigned by the board manufacturer. /// UINT8 Slot; /// /// Reserved for future use. /// UINT8 Reserved; } EFI_LEGACY_IRQ_ROUTING_ENTRY; #pragma pack() /** Finds the binary data or other platform information. @param This Protocol instance pointer. @param Mode Specifies what data to return. See See EFI_GET_PLATFORM_INFO_MODE enum. @param Table Mode specific. See EFI_GET_PLATFORM_INFO_MODE enum. @param TableSize Mode specific. See EFI_GET_PLATFORM_INFO_MODE enum. @param Location Mode specific. See EFI_GET_PLATFORM_INFO_MODE enum. @param Alignment Mode specific. See EFI_GET_PLATFORM_INFO_MODE enum. @param LegacySegment Mode specific. See EFI_GET_PLATFORM_INFO_MODE enum. @param LegacyOffset Mode specific. See EFI_GET_PLATFORM_INFO_MODE enum. @retval EFI_SUCCESS Data was returned successfully. @retval EFI_UNSUPPORTED Mode is not supported on the platform. @retval EFI_NOT_FOUND Binary image or table not found. **/ typedef EFI_STATUS (EFIAPI *EFI_LEGACY_BIOS_PLATFORM_GET_PLATFORM_INFO)( IN EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *This, IN EFI_GET_PLATFORM_INFO_MODE Mode, OUT VOID **Table, OUT UINTN *TableSize, OUT UINTN *Location, OUT UINTN *Alignment, IN UINT16 LegacySegment, IN UINT16 LegacyOffset ); /** Returns a buffer of handles for the requested subfunction. @param This Protocol instance pointer. @param Mode Specifies what handle to return. See EFI_GET_PLATFORM_HANDLE_MODE enum. @param Type Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum. @param HandleBuffer Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum. @param HandleCount Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum. @param AdditionalData Mode specific. See EFI_GET_PLATFORM_HANDLE_MODE enum. @retval EFI_SUCCESS Handle is valid @retval EFI_UNSUPPORTED Mode is not supported on the platform. @retval EFI_NOT_FOUND Handle is not known **/ typedef EFI_STATUS (EFIAPI *EFI_LEGACY_BIOS_PLATFORM_GET_PLATFORM_HANDLE)( IN EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *This, IN EFI_GET_PLATFORM_HANDLE_MODE Mode, IN UINT16 Type, OUT EFI_HANDLE **HandleBuffer, OUT UINTN *HandleCount, IN VOID **AdditionalData OPTIONAL ); /** Load and initialize the Legacy BIOS SMM handler. @param This Protocol instance pointer. @param EfiToLegacy16BootTable Pointer to Legacy16 boot table. @retval EFI_SUCCESS SMM code loaded. @retval EFI_DEVICE_ERROR SMM code failed to load **/ typedef EFI_STATUS (EFIAPI *EFI_LEGACY_BIOS_PLATFORM_SMM_INIT)( IN EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *This, IN VOID *EfiToLegacy16BootTable ); /** Allows platform to perform any required action after a LegacyBios operation. Invokes the specific sub function specified by Mode. @param This Protocol instance pointer. @param Mode Specifies what handle to return. See EFI_GET_PLATFORM_HOOK_MODE enum. @param Type Mode specific. See EFI_GET_PLATFORM_HOOK_MODE enum. @param DeviceHandle Mode specific. See EFI_GET_PLATFORM_HOOK_MODE enum. @param ShadowAddress Mode specific. See EFI_GET_PLATFORM_HOOK_MODE enum. @param Compatibility16Table Mode specific. See EFI_GET_PLATFORM_HOOK_MODE enum. @param AdditionalData Mode specific. See EFI_GET_PLATFORM_HOOK_MODE enum. @retval EFI_SUCCESS The operation performed successfully, Mode specific. @retval EFI_UNSUPPORTED Mode is not supported on the platform. **/ typedef EFI_STATUS (EFIAPI *EFI_LEGACY_BIOS_PLATFORM_HOOKS)( IN EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *This, IN EFI_GET_PLATFORM_HOOK_MODE Mode, IN UINT16 Type, IN EFI_HANDLE DeviceHandle, OPTIONAL IN OUT UINTN *ShadowAddress, OPTIONAL IN EFI_COMPATIBILITY16_TABLE *Compatibility16Table, OPTIONAL OUT VOID **AdditionalData OPTIONAL ); /** Returns information associated with PCI IRQ routing. This function returns the following information associated with PCI IRQ routing: An IRQ routing table and number of entries in the table The $PIR table and its size A list of PCI IRQs and the priority order to assign them @param This Protocol instance pointer. @param RoutingTable Pointer to PCI IRQ Routing table. This location is the $PIR table minus the header. @param RoutingTableEntries Number of entries in table. @param LocalPirqTable $PIR table @param PirqTableSize $PIR table size @param LocalIrqPriorityTable List of interrupts in priority order to assign @param IrqPriorityTableEntries Number of entries in priority table @retval EFI_SUCCESS Data was successfully returned. **/ typedef EFI_STATUS (EFIAPI *EFI_LEGACY_BIOS_PLATFORM_GET_ROUTING_TABLE)( IN EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *This, OUT VOID **RoutingTable, OUT UINTN *RoutingTableEntries, OUT VOID **LocalPirqTable, OPTIONAL OUT UINTN *PirqTableSize, OPTIONAL OUT VOID **LocalIrqPriorityTable, OPTIONAL OUT UINTN *IrqPriorityTableEntries OPTIONAL ); /** Translates the given PIRQ accounting for bridge This function translates the given PIRQ back through all buses, if required, and returns the true PIRQ and associated IRQ. @param This Protocol instance pointer. @param PciBus PCI bus number for this device. @param PciDevice PCI device number for this device. @param PciFunction PCI function number for this device. @param Pirq Input is PIRQ reported by device, output is true PIRQ. @param PciIrq The IRQ already assigned to the PIRQ or the IRQ to be assigned to the PIRQ. @retval EFI_SUCCESS The PIRQ was translated. **/ typedef EFI_STATUS (EFIAPI *EFI_LEGACY_BIOS_PLATFORM_TRANSLATE_PIRQ)( IN EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *This, IN UINTN PciBus, IN UINTN PciDevice, IN UINTN PciFunction, IN OUT UINT8 *Pirq, OUT UINT8 *PciIrq ); /** Attempt to legacy boot the BootOption. If the EFI contexted has been compromised this function will not return. @param This Protocol instance pointer. @param BbsDevicePath EFI Device Path from BootXXXX variable. @param BbsTable Internal BBS table. @param LoadOptionSize Size of LoadOption in size. @param LoadOption LoadOption from BootXXXX variable @param EfiToLegacy16BootTable Pointer to BootTable structure @retval EFI_SUCCESS Ready to boot. **/ typedef EFI_STATUS (EFIAPI *EFI_LEGACY_BIOS_PLATFORM_PREPARE_TO_BOOT)( IN EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *This, IN BBS_BBS_DEVICE_PATH *BbsDevicePath, IN VOID *BbsTable, IN UINT32 LoadOptionsSize, IN VOID *LoadOptions, IN VOID *EfiToLegacy16BootTable ); /** This protocol abstracts the platform portion of the traditional BIOS. **/ struct _EFI_LEGACY_BIOS_PLATFORM_PROTOCOL { /// /// Gets binary data or other platform information. /// EFI_LEGACY_BIOS_PLATFORM_GET_PLATFORM_INFO GetPlatformInfo; /// /// Returns a buffer of all handles matching the requested subfunction. /// EFI_LEGACY_BIOS_PLATFORM_GET_PLATFORM_HANDLE GetPlatformHandle; /// /// Loads and initializes the traditional BIOS SMM handler. EFI_LEGACY_BIOS_PLATFORM_SMM_INIT SmmInit; /// /// Allows platform to perform any required actions after a LegacyBios operation. /// EFI_LEGACY_BIOS_PLATFORM_HOOKS PlatformHooks; /// /// Gets $PIR table. EFI_LEGACY_BIOS_PLATFORM_GET_ROUTING_TABLE GetRoutingTable; /// /// Translates the given PIRQ to the final value after traversing any PCI bridges. /// EFI_LEGACY_BIOS_PLATFORM_TRANSLATE_PIRQ TranslatePirq; /// /// Final platform function before the system attempts to boot to a traditional OS. /// EFI_LEGACY_BIOS_PLATFORM_PREPARE_TO_BOOT PrepareToBoot; }; extern EFI_GUID gEfiLegacyBiosPlatformProtocolGuid; #endif