/*++ Copyright (c) 2006, Intel Corporation All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Module Name: ScsiBus.h Abstract: Header file for SCSI Bus Driver. Revision History --*/ #ifndef _SCSI_BUS_H #define _SCSI_BUS_H #include // // 1000 * 1000 * 10 // #define ONE_SECOND_TIMER 10000000 #define SCSI_IO_DEV_SIGNATURE EFI_SIGNATURE_32 ('s', 'c', 'i', 'o') typedef struct _SCSI_TARGET_ID { union { UINT32 Scsi; UINT8 ExtScsi[4]; } ScsiId; UINT8 ExtScsiId[12]; }SCSI_TARGET_ID; typedef struct { VOID *Data1; VOID *Data2; } SCSI_EVENT_DATA; typedef struct { UINT32 Signature; EFI_HANDLE Handle; EFI_SCSI_IO_PROTOCOL ScsiIo; EFI_DEVICE_PATH_PROTOCOL *DevicePath; BOOLEAN ExtScsiSupport; EFI_SCSI_PASS_THRU_PROTOCOL *ScsiPassThru; EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiPassThru; SCSI_TARGET_ID Pun; UINT64 Lun; UINT8 ScsiDeviceType; UINT8 ScsiVersion; BOOLEAN RemovableDevice; } SCSI_IO_DEV; #define SCSI_IO_DEV_FROM_THIS(a) CR (a, SCSI_IO_DEV, ScsiIo, SCSI_IO_DEV_SIGNATURE) // // SCSI Bus Controller device strcuture // #define EFI_SCSI_BUS_PROTOCOL_GUID \ { \ 0x5261213D, 0x3A3D, 0x441E, {0xB3, 0xAF, 0x21, 0xD3, 0xF7, 0xA4, 0xCA, 0x17} \ } typedef struct _EFI_SCSI_BUS_PROTOCOL { UINT64 Reserved; } EFI_SCSI_BUS_PROTOCOL; #define SCSI_BUS_DEVICE_SIGNATURE EFI_SIGNATURE_32 ('s', 'c', 's', 'i') typedef struct _SCSI_BUS_DEVICE { UINTN Signature; EFI_SCSI_BUS_PROTOCOL BusIdentify; BOOLEAN ExtScsiSupport; EFI_SCSI_PASS_THRU_PROTOCOL *ScsiInterface; EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiInterface; EFI_DEVICE_PATH_PROTOCOL *DevicePath; } SCSI_BUS_DEVICE; #define SCSI_BUS_CONTROLLER_DEVICE_FROM_THIS(a) CR (a, SCSI_BUS_DEVICE, BusIdentify, SCSI_BUS_DEVICE_SIGNATURE) // // Global Variables // extern EFI_DRIVER_BINDING_PROTOCOL gScsiBusDriverBinding; extern EFI_COMPONENT_NAME_PROTOCOL gScsiBusComponentName; EFI_STATUS EFIAPI SCSIBusDriverBindingSupported ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE Controller, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ); EFI_STATUS EFIAPI SCSIBusDriverBindingStart ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE Controller, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ); EFI_STATUS EFIAPI SCSIBusDriverBindingStop ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE Controller, IN UINTN NumberOfChildren, IN EFI_HANDLE *ChildHandleBuffer ); // // EFI Component Name Functions // EFI_STATUS EFIAPI ScsiBusComponentNameGetDriverName ( IN EFI_COMPONENT_NAME_PROTOCOL *This, IN CHAR8 *Language, OUT CHAR16 **DriverName ); EFI_STATUS EFIAPI ScsiBusComponentNameGetControllerName ( IN EFI_COMPONENT_NAME_PROTOCOL *This, IN EFI_HANDLE ControllerHandle, IN EFI_HANDLE ChildHandle OPTIONAL, IN CHAR8 *Language, OUT CHAR16 **ControllerName ); EFI_STATUS EFIAPI ScsiGetDeviceType ( IN EFI_SCSI_IO_PROTOCOL *This, OUT UINT8 *DeviceType ) /*++ Routine Description: Retrieves the device type information of the SCSI Controller. Arguments: This - Protocol instance pointer. DeviceType - A pointer to the device type information retrieved from the SCSI Controller. Returns: EFI_SUCCESS - Retrieves the device type information successfully. EFI_INVALID_PARAMETER - The DeviceType is NULL. --*/ ; EFI_STATUS EFIAPI ScsiResetBus ( IN EFI_SCSI_IO_PROTOCOL *This ) /*++ Routine Description: Resets the SCSI Bus that the SCSI Controller is attached to. Arguments: This - Protocol instance pointer. Returns: EFI_SUCCESS - The SCSI bus is reset successfully. EFI_DEVICE_ERROR - Errors encountered when resetting the SCSI bus. EFI_UNSUPPORTED - The bus reset operation is not supported by the SCSI Host Controller. EFI_TIMEOUT - A timeout occurred while attempting to reset the SCSI bus. --*/ ; EFI_STATUS EFIAPI ScsiResetDevice ( IN EFI_SCSI_IO_PROTOCOL *This ) /*++ Routine Description: Resets the SCSI Controller that the device handle specifies. Arguments: This - Protocol instance pointer. Returns: EFI_SUCCESS - Reset the SCSI controller successfully. EFI_DEVICE_ERROR - Errors are encountered when resetting the SCSI Controller. EFI_UNSUPPORTED - The SCSI bus does not support a device reset operation. EFI_TIMEOUT - A timeout occurred while attempting to reset the SCSI Controller. --*/ ; EFI_STATUS EFIAPI ScsiExecuteSCSICommand ( IN EFI_SCSI_IO_PROTOCOL *This, IN OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET *CommandPacket, IN EFI_EVENT Event ) /*++ Routine Description: Sends a SCSI Request Packet to the SCSI Controller for execution. Arguments: This - Protocol instance pointer. Packet - The SCSI request packet to send to the SCSI Controller specified by the device handle. Event - If the SCSI bus where the SCSI device is attached does not support non-blocking I/O, then Event is ignored, and blocking I/O is performed. If Event is NULL, then blocking I/O is performed. If Event is not NULL and non-blocking I/O is supported, then non-blocking I/O is performed, and Event will be signaled when the SCSI Request Packet completes. Returns: EFI_SUCCESS - The SCSI Request Packet was sent by the host successfully, and TransferLength bytes were transferred to/from DataBuffer.See HostAdapterStatus, TargetStatus, SenseDataLength, and SenseData in that order for additional status information. EFI_BAD_BUFFER_SIZE - The SCSI Request Packet was executed, but the entire DataBuffer could not be transferred. The actual number of bytes transferred is returned in TransferLength. See HostAdapterStatus, TargetStatus, SenseDataLength, and SenseData in that order for additional status information. EFI_NOT_READY - The SCSI Request Packet could not be sent because there are too many SCSI Command Packets already queued.The caller may retry again later. EFI_DEVICE_ERROR - A device error occurred while attempting to send the SCSI Request Packet. See HostAdapterStatus, TargetStatus, SenseDataLength, and SenseData in that order for additional status information. EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid. The SCSI Request Packet was not sent, so no additional status information is available. EFI_UNSUPPORTED - The command described by the SCSI Request Packet is not supported by the SCSI initiator(i.e., SCSI Host Controller). The SCSI Request Packet was not sent, so no additional status information is available. EFI_TIMEOUT - A timeout occurred while waiting for the SCSI Request Packet to execute. See HostAdapterStatus, TargetStatus, SenseDataLength, and SenseData in that order for additional status information. --*/ ; EFI_STATUS ScsiScanCreateDevice ( EFI_DRIVER_BINDING_PROTOCOL *This, EFI_HANDLE Controller, SCSI_TARGET_ID *TargetId, UINT64 Lun, SCSI_BUS_DEVICE *ScsiBusDev ) /*++ Routine Description: Scan SCSI Bus to discover the device, and attach ScsiIoProtocol to it. Arguments: This - Protocol instance pointer Controller - Controller handle Pun - The Pun of the SCSI device on the SCSI channel. Lun - The Lun of the SCSI device on the SCSI channel. ScsiBusDev - The pointer of SCSI_BUS_DEVICE Returns: EFI_SUCCESS - Successfully to discover the device and attach ScsiIoProtocol to it. EFI_OUT_OF_RESOURCES - Fail to discover the device. --*/ ; BOOLEAN DiscoverScsiDevice ( SCSI_IO_DEV *ScsiIoDevice ) /*++ Routine Description: Discovery SCSI Device Arguments: ScsiIoDevice - The pointer of SCSI_IO_DEV Returns: TRUE - Find SCSI Device and verify it. FALSE - Unable to find SCSI Device. --*/ ; #endif