/** @file
Basic Graphics operations based on UEFI HII, Graphics Output protocol or UGA
Draw protocol.
Copyright (c) 2006 - 2008, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Uefi.h>
#include <Protocol/SimpleTextOut.h>
#include <Protocol/OEMBadging.h>
#include <Protocol/ConsoleControl.h>
#include <Protocol/GraphicsOutput.h>
#include <Protocol/FirmwareVolume2.h>
#include <Protocol/UgaDraw.h>
#include <Protocol/HiiFont.h>
#include <Protocol/HiiImage.h>
#include <Guid/Bmp.h>
#include <Library/GraphicsLib.h>
#include <Library/PrintLib.h>
#include <Library/BaseLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DxePiLib.h>
#include <Library/PcdLib.h>
STATIC EFI_GRAPHICS_OUTPUT_BLT_PIXEL mEfiColors[16] = {
{ 0x00, 0x00, 0x00, 0x00 },
{ 0x98, 0x00, 0x00, 0x00 },
{ 0x00, 0x98, 0x00, 0x00 },
{ 0x98, 0x98, 0x00, 0x00 },
{ 0x00, 0x00, 0x98, 0x00 },
{ 0x98, 0x00, 0x98, 0x00 },
{ 0x00, 0x98, 0x98, 0x00 },
{ 0x98, 0x98, 0x98, 0x00 },
{ 0x10, 0x10, 0x10, 0x00 },
{ 0xff, 0x10, 0x10, 0x00 },
{ 0x10, 0xff, 0x10, 0x00 },
{ 0xff, 0xff, 0x10, 0x00 },
{ 0x10, 0x10, 0xff, 0x00 },
{ 0xf0, 0x10, 0xff, 0x00 },
{ 0x10, 0xff, 0xff, 0x00 },
{ 0xff, 0xff, 0xff, 0x00 }
};
/**
Return the graphics image file named FileNameGuid into Image and return it's
size in ImageSize. All Firmware Volumes (FV) in the system are searched for the
file name.
@param FileNameGuid File Name of graphics file in the FV(s).
@param Image Pointer to pointer to return graphics image. If NULL, a
buffer will be allocated.
@param ImageSize Size of the graphics Image in bytes. Zero if no image found.
@retval EFI_SUCCESS Image and ImageSize are valid.
@retval EFI_BUFFER_TOO_SMALL Image not big enough. ImageSize has required size
@retval EFI_NOT_FOUND FileNameGuid not found
**/
EFI_STATUS
EFIAPI
GetGraphicsBitMapFromFV (
IN EFI_GUID *FileNameGuid,
OUT VOID **Image,
OUT UINTN *ImageSize
)
{
return GetGraphicsBitMapFromFVEx (NULL, FileNameGuid, Image, ImageSize);
}
/**
Return the graphics image file named FileNameGuid into Image and return it's
size in ImageSize. All Firmware Volumes (FV) in the system are searched for the
file name.
@param ImageHandle The driver image handle of the caller. The parameter is used to
optimize the loading of the image file so that the FV from which
the driver image is loaded will be tried first.
@param FileNameGuid File Name of graphics file in the FV(s).
@param Image Pointer to pointer to return graphics image. If NULL, a
buffer will be allocated.
@param ImageSize Size of the graphics Image in bytes. Zero if no image found.
@retval EFI_SUCCESS Image and ImageSize are valid.
@retval EFI_BUFFER_TOO_SMALL Image not big enough. ImageSize has required size
@retval EFI_NOT_FOUND FileNameGuid not found
**/
EFI_STATUS
EFIAPI
GetGraphicsBitMapFromFVEx (
IN EFI_HANDLE ImageHandle,
IN EFI_GUID *FileNameGuid,
OUT VOID **Image,
OUT UINTN *ImageSize
)
{
return PiLibGetSectionFromAnyFv (
FileNameGuid,
EFI_SECTION_RAW,
0,
Image,
ImageSize
);
}
/**
Convert a *.BMP graphics image to a GOP blt buffer. If a NULL Blt buffer
is passed in a GopBlt buffer will be allocated by this routine. If a GopBlt
buffer is passed in it will be used if it is big enough.
@param BmpImage Pointer to BMP file
@param BmpImageSize Number of bytes in BmpImage
@param GopBlt Buffer containing GOP version of BmpImage.
@param GopBltSize Size of GopBlt in bytes.
@param PixelHeight Height of GopBlt/BmpImage in pixels
@param PixelWidth Width of GopBlt/BmpImage in pixels
@retval EFI_SUCCESS GopBlt and GopBltSize are returned.
@retval EFI_UNSUPPORTED BmpImage is not a valid *.BMP image
@retval EFI_BUFFER_TOO_SMALL The passed in GopBlt buffer is not big enough.
GopBltSize will contain the required size.
@retval EFI_OUT_OF_RESOURCES No enough buffer to allocate.
**/
EFI_STATUS
EFIAPI
ConvertBmpToGopBlt (
IN VOID *BmpImage,
IN UINTN BmpImageSize,
IN OUT VOID **GopBlt,
IN OUT UINTN *GopBltSize,
OUT UINTN *PixelHeight,
OUT UINTN *PixelWidth
)
{
UINT8 *Image;
UINT8 *ImageHeader;
BMP_IMAGE_HEADER *BmpHeader;
BMP_COLOR_MAP *BmpColorMap;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt;
UINTN BltBufferSize;
UINTN Index;
UINTN Height;
UINTN Width;
UINTN ImageIndex;
BOOLEAN IsAllocated;
BmpHeader = (BMP_IMAGE_HEADER *) BmpImage;
if (BmpHeader->CharB != 'B' || BmpHeader->CharM != 'M') {
return EFI_UNSUPPORTED;
}
//
// Doesn't support compress.
//
if (BmpHeader->CompressionType != 0) {
return EFI_UNSUPPORTED;
}
//
// Calculate Color Map offset in the image.
//
Image = BmpImage;
BmpColorMap = (BMP_COLOR_MAP *) (Image + sizeof (BMP_IMAGE_HEADER));
//
// Calculate graphics image data address in the image
//
Image = ((UINT8 *) BmpImage) + BmpHeader->ImageOffset;
ImageHeader = Image;
//
// Calculate the BltBuffer needed size.
//
BltBufferSize = BmpHeader->PixelWidth * BmpHeader->PixelHeight * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL);
IsAllocated = FALSE;
if (*GopBlt == NULL) {
//
// GopBlt is not allocated by caller.
//
*GopBltSize = BltBufferSize;
*GopBlt = AllocatePool (*GopBltSize);
IsAllocated = TRUE;
if (*GopBlt == NULL) {
return EFI_OUT_OF_RESOURCES;
}
} else {
//
// GopBlt has been allocated by caller.
//
if (*GopBltSize < BltBufferSize) {
*GopBltSize = BltBufferSize;
return EFI_BUFFER_TOO_SMALL;
}
}
*PixelWidth = BmpHeader->PixelWidth;
*PixelHeight = BmpHeader->PixelHeight;
//
// Convert image from BMP to Blt buffer format
//
BltBuffer = *GopBlt;
for (Height = 0; Height < BmpHeader->PixelHeight; Height++) {
Blt = &BltBuffer[(BmpHeader->PixelHeight - Height - 1) * BmpHeader->PixelWidth];
for (Width = 0; Width < BmpHeader->PixelWidth; Width++, Image++, Blt++) {
switch (BmpHeader->BitPerPixel) {
case 1:
//
// Convert 1-bit (2 colors) BMP to 24-bit color
//
for (Index = 0; Index < 8 && Width < BmpHeader->PixelWidth; Index++) {
Blt->Red = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Red;
Blt->Green = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Green;
Blt->Blue = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Blue;
Blt++;
Width++;
}
Blt --;
Width --;
break;
case 4:
//
// Convert 4-bit (16 colors) BMP Palette to 24-bit color
//
Index = (*Image) >> 4;
Blt->Red = BmpColorMap[Index].Red;
Blt->Green = BmpColorMap[Index].Green;
Blt->Blue = BmpColorMap[Index].Blue;
if (Width < (BmpHeader->PixelWidth - 1)) {
Blt++;
Width++;
Index = (*Image) & 0x0f;
Blt->Red = BmpColorMap[Index].Red;
Blt->Green = BmpColorMap[Index].Green;
Blt->Blue = BmpColorMap[Index].Blue;
}
break;
case 8:
//
// Convert 8-bit (256 colors) BMP Palette to 24-bit color
//
Blt->Red = BmpColorMap[*Image].Red;
Blt->Green = BmpColorMap[*Image].Green;
Blt->Blue = BmpColorMap[*Image].Blue;
break;
case 24:
//
// It is 24-bit BMP.
//
Blt->Blue = *Image++;
Blt->Green = *Image++;
Blt->Red = *Image;
break;
default:
//
// Other bit format BMP is not supported.
//
if (IsAllocated) {
FreePool (*GopBlt);
*GopBlt = NULL;
}
return EFI_UNSUPPORTED;
break;
};
}
ImageIndex = (UINTN) (Image - ImageHeader);
if ((ImageIndex % 4) != 0) {
//
// Bmp Image starts each row on a 32-bit boundary!
//
Image = Image + (4 - (ImageIndex % 4));
}
}
return EFI_SUCCESS;
}
/**
Use Console Control Protocol to lock the Console In Spliter virtual handle.
This is the ConInHandle and ConIn handle in the EFI system table. All key
presses will be ignored until the Password is typed in. The only way to
disable the password is to type it in to a ConIn device.
@param Password Password used to lock ConIn device.
@retval EFI_SUCCESS ConsoleControl has been flipped to graphics and logo
displayed.
@retval EFI_UNSUPPORTED Password not found.
**/
EFI_STATUS
EFIAPI
LockKeyboards (
IN CHAR16 *Password
)
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID **) &ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
Status = ConsoleControl->LockStdIn (ConsoleControl, Password);
return Status;
}
/**
Use Console Control to turn off UGA based Simple Text Out consoles from going
to the UGA device. Put up LogoFile on every UGA device that is a console.
@param LogoFile File name of logo to display on the center of the screen.
@retval EFI_SUCCESS ConsoleControl has been flipped to graphics and logo displayed.
@retval EFI_UNSUPPORTED Logo not found.
**/
EFI_STATUS
EFIAPI
EnableQuietBoot (
IN EFI_GUID *LogoFile
)
{
return EnableQuietBootEx (LogoFile, NULL);
}
/**
Use Console Control to turn off UGA based Simple Text Out consoles from going
to the UGA device. Put up LogoFile on every UGA device that is a console
@param LogoFile File name of logo to display on the center of the screen.
@param ImageHandle The driver image handle of the caller. The parameter is used to
optimize the loading of the logo file so that the FV from which
the driver image is loaded will be tried first.
@retval EFI_SUCCESS ConsoleControl has been flipped to graphics and logo displayed.
@retval EFI_UNSUPPORTED Logo not found.
**/
EFI_STATUS
EFIAPI
EnableQuietBootEx (
IN EFI_GUID *LogoFile,
IN EFI_HANDLE ImageHandle
)
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
EFI_OEM_BADGING_PROTOCOL *Badging;
UINT32 SizeOfX;
UINT32 SizeOfY;
INTN DestX;
INTN DestY;
UINT8 *ImageData;
UINTN ImageSize;
UINTN BltSize;
UINT32 Instance;
EFI_BADGING_FORMAT Format;
EFI_BADGING_DISPLAY_ATTRIBUTE Attribute;
UINTN CoordinateX;
UINTN CoordinateY;
UINTN Height;
UINTN Width;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
UINT32 ColorDepth;
UINT32 RefreshRate;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID **) &ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
UgaDraw = NULL;
//
// Try to open GOP first
//
Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiGraphicsOutputProtocolGuid, (VOID **) &GraphicsOutput);
if (EFI_ERROR (Status) && FeaturePcdGet (PcdUgaConsumeSupport)) {
GraphicsOutput = NULL;
//
// Open GOP failed, try to open UGA
//
Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiUgaDrawProtocolGuid, (VOID **) &UgaDraw);
}
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
Badging = NULL;
Status = gBS->LocateProtocol (&gEfiOEMBadgingProtocolGuid, NULL, (VOID **) &Badging);
//
// Set console control to graphics mode.
//
Status = ConsoleControl->SetMode (ConsoleControl, EfiConsoleControlScreenGraphics);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
if (GraphicsOutput != NULL) {
SizeOfX = GraphicsOutput->Mode->Info->HorizontalResolution;
SizeOfY = GraphicsOutput->Mode->Info->VerticalResolution;
} else if (FeaturePcdGet (PcdUgaConsumeSupport)) {
Status = UgaDraw->GetMode (UgaDraw, &SizeOfX, &SizeOfY, &ColorDepth, &RefreshRate);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
} else {
return EFI_UNSUPPORTED;
}
Instance = 0;
while (1) {
ImageData = NULL;
ImageSize = 0;
if (Badging != NULL) {
//
// Get image from OEMBadging protocol.
//
Status = Badging->GetImage (
Badging,
&Instance,
&Format,
&ImageData,
&ImageSize,
&Attribute,
&CoordinateX,
&CoordinateY
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Currently only support BMP format.
//
if (Format != EfiBadgingFormatBMP) {
SafeFreePool (ImageData);
continue;
}
} else {
//
// Get the specified image from FV.
//
Status = GetGraphicsBitMapFromFVEx (ImageHandle, LogoFile, (VOID **) &ImageData, &ImageSize);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
CoordinateX = 0;
CoordinateY = 0;
Attribute = EfiBadgingDisplayAttributeCenter;
}
Blt = NULL;
Status = ConvertBmpToGopBlt (
ImageData,
ImageSize,
(VOID **) &Blt,
&BltSize,
&Height,
&Width
);
if (EFI_ERROR (Status)) {
SafeFreePool (ImageData);
if (Badging == NULL) {
return Status;
} else {
continue;
}
}
//
// Caculate the display position according to Attribute.
//
switch (Attribute) {
case EfiBadgingDisplayAttributeLeftTop:
DestX = CoordinateX;
DestY = CoordinateY;
break;
case EfiBadgingDisplayAttributeCenterTop:
DestX = (SizeOfX - Width) / 2;
DestY = CoordinateY;
break;
case EfiBadgingDisplayAttributeRightTop:
DestX = (SizeOfX - Width - CoordinateX);
DestY = CoordinateY;;
break;
case EfiBadgingDisplayAttributeCenterRight:
DestX = (SizeOfX - Width - CoordinateX);
DestY = (SizeOfY - Height) / 2;
break;
case EfiBadgingDisplayAttributeRightBottom:
DestX = (SizeOfX - Width - CoordinateX);
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeCenterBottom:
DestX = (SizeOfX - Width) / 2;
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeLeftBottom:
DestX = CoordinateX;
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeCenterLeft:
DestX = CoordinateX;
DestY = (SizeOfY - Height) / 2;
break;
case EfiBadgingDisplayAttributeCenter:
DestX = (SizeOfX - Width) / 2;
DestY = (SizeOfY - Height) / 2;
break;
default:
DestX = CoordinateX;
DestY = CoordinateY;
break;
}
if ((DestX >= 0) && (DestY >= 0)) {
if (GraphicsOutput != NULL) {
Status = GraphicsOutput->Blt (
GraphicsOutput,
Blt,
EfiBltBufferToVideo,
0,
0,
(UINTN) DestX,
(UINTN) DestY,
Width,
Height,
Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
);
} else if (FeaturePcdGet (PcdUgaConsumeSupport)) {
Status = UgaDraw->Blt (
UgaDraw,
(EFI_UGA_PIXEL *) Blt,
EfiUgaBltBufferToVideo,
0,
0,
(UINTN) DestX,
(UINTN) DestY,
Width,
Height,
Width * sizeof (EFI_UGA_PIXEL)
);
} else {
Status = EFI_UNSUPPORTED;
}
}
SafeFreePool (ImageData);
SafeFreePool (Blt);
if (Badging == NULL) {
break;
}
}
return Status;
}
/**
Use Console Control to turn on UGA based Simple Text Out consoles. The UGA
Simple Text Out screens will now be synced up with all non UGA output devices
@retval EFI_SUCCESS UGA devices are back in text mode and synced up.
@retval EFI_UNSUPPORTED Logo not found
**/
EFI_STATUS
EFIAPI
DisableQuietBoot (
VOID
)
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID **) &ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
//
// Set console control to text mode.
//
return ConsoleControl->SetMode (ConsoleControl, EfiConsoleControlScreenText);
}
/**
Internal display string worker function.
@param GraphicsOutput Graphics output protocol interface.
@param UgaDraw UGA draw protocol interface.
@param Sto Simple text out protocol interface.
@param X X coordinate to start printing.
@param Y Y coordinate to start printing.
@param Foreground Foreground color.
@param Background Background color.
@param fmt Format string.
@param args Print arguments.
@return Number of Characters printed. Zero means no any character
displayed successfully.
**/
UINTN
Print (
IN EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
IN EFI_UGA_DRAW_PROTOCOL *UgaDraw,
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *Sto,
IN UINTN X,
IN UINTN Y,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Foreground,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Background,
IN CHAR16 *fmt,
IN VA_LIST args
)
{
VOID *Buffer;
EFI_STATUS Status;
UINTN Index;
CHAR16 *UnicodeWeight;
UINT32 HorizontalResolution;
UINT32 VerticalResolution;
UINT32 ColorDepth;
UINT32 RefreshRate;
UINTN BufferLen;
UINTN LineBufferLen;
EFI_HII_FONT_PROTOCOL *HiiFont;
EFI_IMAGE_OUTPUT *Blt;
EFI_FONT_DISPLAY_INFO *FontInfo;
EFI_HII_ROW_INFO *RowInfoArray;
UINTN RowInfoArraySize;
UINTN PrintNum;
//
// For now, allocate an arbitrarily long buffer
//
Buffer = AllocateZeroPool (0x10000);
if (Buffer == NULL) {
return 0;
}
HorizontalResolution = 0;
VerticalResolution = 0;
Blt = NULL;
FontInfo = NULL;
PrintNum = 0;
if (GraphicsOutput != NULL) {
HorizontalResolution = GraphicsOutput->Mode->Info->HorizontalResolution;
VerticalResolution = GraphicsOutput->Mode->Info->VerticalResolution;
} else if (FeaturePcdGet (PcdUgaConsumeSupport)) {
UgaDraw->GetMode (UgaDraw, &HorizontalResolution, &VerticalResolution, &ColorDepth, &RefreshRate);
} else {
Status = EFI_UNSUPPORTED;
goto Error;
}
ASSERT ((HorizontalResolution != 0) && (VerticalResolution !=0));
Status = gBS->LocateProtocol (&gEfiHiiFontProtocolGuid, NULL, (VOID **) &HiiFont);
if (EFI_ERROR (Status)) {
goto Error;
}
PrintNum = UnicodeVSPrint (Buffer, 0x10000, fmt, args);
UnicodeWeight = (CHAR16 *) Buffer;
for (Index = 0; UnicodeWeight[Index] != 0; Index++) {
if (UnicodeWeight[Index] == CHAR_BACKSPACE ||
UnicodeWeight[Index] == CHAR_LINEFEED ||
UnicodeWeight[Index] == CHAR_CARRIAGE_RETURN) {
UnicodeWeight[Index] = 0;
}
}
BufferLen = StrLen (Buffer);
LineBufferLen = sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) * HorizontalResolution * EFI_GLYPH_HEIGHT;
if (EFI_GLYPH_WIDTH * EFI_GLYPH_HEIGHT * sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL) * BufferLen > LineBufferLen) {
Status = EFI_INVALID_PARAMETER;
goto Error;
}
Blt = (EFI_IMAGE_OUTPUT *) AllocateZeroPool (sizeof (EFI_IMAGE_OUTPUT));
if (Blt == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
Blt->Width = (UINT16) (HorizontalResolution);
Blt->Height = (UINT16) (VerticalResolution);
FontInfo = (EFI_FONT_DISPLAY_INFO *) AllocateZeroPool (sizeof (EFI_FONT_DISPLAY_INFO));
if (FontInfo == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
if (Foreground != NULL) {
CopyMem (&FontInfo->ForegroundColor, Foreground, sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
} else {
CopyMem (
&FontInfo->ForegroundColor,
&mEfiColors[Sto->Mode->Attribute & 0x0f],
sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
);
}
if (Background != NULL) {
CopyMem (&FontInfo->BackgroundColor, Background, sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
} else {
CopyMem (
&FontInfo->BackgroundColor,
&mEfiColors[Sto->Mode->Attribute >> 4],
sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
);
}
if (GraphicsOutput != NULL) {
Blt->Image.Screen = GraphicsOutput;
Status = HiiFont->StringToImage (
HiiFont,
EFI_HII_IGNORE_IF_NO_GLYPH | EFI_HII_DIRECT_TO_SCREEN,
Buffer,
FontInfo,
&Blt,
X,
Y,
NULL,
NULL,
NULL
);
} else if (FeaturePcdGet (PcdUgaConsumeSupport)) {
ASSERT (UgaDraw!= NULL);
Blt->Image.Bitmap = AllocateZeroPool (Blt->Width * Blt->Height * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
if (Blt->Image.Bitmap == NULL) {
SafeFreePool (Blt);
SafeFreePool (Buffer);
return EFI_OUT_OF_RESOURCES;
}
RowInfoArray = NULL;
//
// StringToImage only support blt'ing image to device using GOP protocol. If GOP is not supported in this platform,
// we ask StringToImage to print the string to blt buffer, then blt to device using UgaDraw.
//
Status = HiiFont->StringToImage (
HiiFont,
EFI_HII_IGNORE_IF_NO_GLYPH,
Buffer,
FontInfo,
&Blt,
X,
Y,
&RowInfoArray,
&RowInfoArraySize,
NULL
);
if (!EFI_ERROR (Status)) {
//
// Line breaks are handled by caller of DrawUnicodeWeightAtCursorN, so the updated parameter RowInfoArraySize by StringToImage will
// always be 1 or 0 (if there is no valid Unicode Char can be printed). ASSERT here to make sure.
//
ASSERT (RowInfoArraySize <= 1);
Status = UgaDraw->Blt (
UgaDraw,
(EFI_UGA_PIXEL *) Blt->Image.Bitmap,
EfiUgaBltBufferToVideo,
X,
Y,
X,
Y,
RowInfoArray[0].LineWidth,
RowInfoArray[0].LineHeight,
Blt->Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
);
}
SafeFreePool (RowInfoArray);
SafeFreePool (Blt->Image.Bitmap);
} else {
Status = EFI_UNSUPPORTED;
}
Error:
SafeFreePool (Blt);
SafeFreePool (FontInfo);
FreePool (Buffer);
if (EFI_ERROR (Status)) {
return PrintNum;
} else {
return 0;
}
}
/**
Print to graphics screen at the given X,Y coordinates of the graphics screen.
see definition of Print to find rules for constructing Fmt.
@param X Row to start printing at.
@param Y Column to start printing at.
@param ForeGround Foreground color.
@param BackGround background color.
@param Fmt Print format sting. See definition of Print.
@param ... Argumnet stream defined by Fmt string.
@return Number of Characters printed. Zero means no any character
displayed successfully.
**/
UINTN
EFIAPI
PrintXY (
IN UINTN X,
IN UINTN Y,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *ForeGround, OPTIONAL
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BackGround, OPTIONAL
IN CHAR16 *Fmt,
...
)
{
EFI_HANDLE Handle;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *Sto;
EFI_STATUS Status;
VA_LIST Args;
VA_START (Args, Fmt);
Handle = gST->ConsoleOutHandle;
Status = gBS->HandleProtocol (
Handle,
&gEfiGraphicsOutputProtocolGuid,
(VOID **) &GraphicsOutput
);
UgaDraw = NULL;
if (EFI_ERROR (Status) && FeaturePcdGet (PcdUgaConsumeSupport)) {
//
// If no GOP available, try to open UGA Draw protocol if supported.
//
GraphicsOutput = NULL;
Status = gBS->HandleProtocol (
Handle,
&gEfiUgaDrawProtocolGuid,
(VOID **) &UgaDraw
);
}
if (EFI_ERROR (Status)) {
return 0;
}
Status = gBS->HandleProtocol (
Handle,
&gEfiSimpleTextOutProtocolGuid,
(VOID **) &Sto
);
if (EFI_ERROR (Status)) {
return 0;
}
return Print (GraphicsOutput, UgaDraw, Sto, X, Y, ForeGround, BackGround, Fmt, Args);
}