/** @file This driver produces Extended SCSI Pass Thru Protocol instances for virtio-scsi devices. The implementation is basic: - No hotplug / hot-unplug. - Although EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() could be a good match for multiple in-flight virtio-scsi requests, we stick to synchronous requests for now. - Timeouts are not supported for EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru(). - Only one channel is supported. (At the time of this writing, host-side virtio-scsi supports a single channel too.) - Only one request queue is used (for the one synchronous request). - The ResetChannel() and ResetTargetLun() functions of EFI_EXT_SCSI_PASS_THRU_PROTOCOL are not supported (which is allowed by the UEFI 2.3.1 Errata C specification), although VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET could be a good match. That would however require client code for the control queue, which is deemed unreasonable for now. Copyright (C) 2012, Red Hat, Inc. Copyright (c) 2012, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #include #include #include #include #include #include #include #include #include "VirtioScsi.h" /** Convenience macros to read and write region 0 IO space elements of the virtio-scsi PCI device, for configuration purposes. The following macros make it possible to specify only the "core parameters" for such accesses and to derive the rest. By the time VIRTIO_CFG_WRITE() returns, the transaction will have been completed. @param[in] Dev Pointer to the VSCSI_DEV structure whose PCI IO space we're accessing. Dev->PciIo must be valid. @param[in] Field A field name from VSCSI_HDR, identifying the virtio-scsi configuration item to access. @param[in] Value (VIRTIO_CFG_WRITE() only.) The value to write to the selected configuration item. @param[out] Pointer (VIRTIO_CFG_READ() only.) The object to receive the value read from the configuration item. Its type must be one of UINT8, UINT16, UINT32, UINT64. @return Status codes returned by VirtioWrite() / VirtioRead(). **/ #define VIRTIO_CFG_WRITE(Dev, Field, Value) (VirtioWrite ( \ (Dev)->PciIo, \ OFFSET_OF_VSCSI (Field), \ SIZE_OF_VSCSI (Field), \ (Value) \ )) #define VIRTIO_CFG_READ(Dev, Field, Pointer) (VirtioRead ( \ (Dev)->PciIo, \ OFFSET_OF_VSCSI (Field), \ SIZE_OF_VSCSI (Field), \ sizeof *(Pointer), \ (Pointer) \ )) // // UEFI Spec 2.3.1 + Errata C, 14.7 Extended SCSI Pass Thru Protocol specifies // the PassThru() interface. Beside returning a status code, the function must // set some fields in the EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET in/out // parameter on return. The following is a full list of those fields, for // easier validation of PopulateRequest(), ParseResponse(), and // VirtioScsiPassThru() below. // // - InTransferLength // - OutTransferLength // - HostAdapterStatus // - TargetStatus // - SenseDataLength // - SenseData // // On any return from the PassThru() interface, these fields must be set, // except if the returned status code is explicitly exempt. (Actually the // implementation here conservatively sets these fields even in case not all // of them would be required by the specification.) // /** Populate a virtio-scsi request from the Extended SCSI Pass Thru Protocol packet. The caller is responsible for pre-zeroing the virtio-scsi request. The Extended SCSI Pass Thru Protocol packet is modified, to be forwarded outwards by VirtioScsiPassThru(), if invalid or unsupported parameters are detected. @param[in] Dev The virtio-scsi host device the packet targets. @param[in] Target The SCSI target controlled by the virtio-scsi host device. @param[in] Lun The Logical Unit Number under the SCSI target. @param[in out] Packet The Extended SCSI Pass Thru Protocol packet the function translates to a virtio-scsi request. On failure this parameter relays error contents. @param[out] Request The pre-zeroed virtio-scsi request to populate. This parameter is volatile-qualified because we expect the caller to append it to a virtio ring, thus assignments to Request must be visible when the function returns. @retval EFI_SUCCESS The Extended SCSI Pass Thru Protocol packet was valid, Request has been populated. @return Otherwise, invalid or unsupported parameters were detected. Status codes are meant for direct forwarding by the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() implementation. **/ STATIC EFI_STATUS EFIAPI PopulateRequest ( IN CONST VSCSI_DEV *Dev, IN UINT16 Target, IN UINT64 Lun, IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, OUT volatile VIRTIO_SCSI_REQ *Request ) { UINTN Idx; if ( // // bidirectional transfer was requested, but the host doesn't support it // (Packet->InTransferLength > 0 && Packet->OutTransferLength > 0 && !Dev->InOutSupported) || // // a target / LUN was addressed that's impossible to encode for the host // Target > 0xFF || Lun >= 0x4000 || // // Command Descriptor Block bigger than VIRTIO_SCSI_CDB_SIZE // Packet->CdbLength > VIRTIO_SCSI_CDB_SIZE || // // From virtio-0.9.5, 2.3.2 Descriptor Table: // "no descriptor chain may be more than 2^32 bytes long in total". // (UINT64) Packet->InTransferLength + Packet->OutTransferLength > SIZE_1GB ) { // // this error code doesn't require updates to the Packet output fields // return EFI_UNSUPPORTED; } if ( // // addressed invalid device // Target > Dev->MaxTarget || Lun > Dev->MaxLun || // // invalid direction (there doesn't seem to be a macro for the "no data // transferred" "direction", eg. for TEST UNIT READY) // Packet->DataDirection > EFI_EXT_SCSI_DATA_DIRECTION_BIDIRECTIONAL || // // trying to receive, but destination pointer is NULL, or contradicting // transfer direction // (Packet->InTransferLength > 0 && (Packet->InDataBuffer == NULL || Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_WRITE ) ) || // // trying to send, but source pointer is NULL, or contradicting transfer // direction // (Packet->OutTransferLength > 0 && (Packet->OutDataBuffer == NULL || Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ ) ) ) { // // this error code doesn't require updates to the Packet output fields // return EFI_INVALID_PARAMETER; } // // Catch oversized requests eagerly. If this condition evaluates to false, // then the combined size of a bidirectional request will not exceed the // virtio-scsi device's transfer limit either. // if (ALIGN_VALUE (Packet->OutTransferLength, 512) / 512 > Dev->MaxSectors / 2 || ALIGN_VALUE (Packet->InTransferLength, 512) / 512 > Dev->MaxSectors / 2) { Packet->InTransferLength = (Dev->MaxSectors / 2) * 512; Packet->OutTransferLength = (Dev->MaxSectors / 2) * 512; Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN; Packet->TargetStatus = EFI_EXT_SCSI_STATUS_TARGET_GOOD; Packet->SenseDataLength = 0; return EFI_BAD_BUFFER_SIZE; } // // target & LUN encoding: see virtio-0.9.5, Appendix I: SCSI Host Device, // Device Operation: request queues // Request->Lun[0] = 1; Request->Lun[1] = (UINT8) Target; Request->Lun[2] = (UINT8) ((Lun >> 8) | 0x40); Request->Lun[3] = (UINT8) Lun; // // CopyMem() would cast away the "volatile" qualifier before access, which is // undefined behavior (ISO C99 6.7.3p5) // for (Idx = 0; Idx < Packet->CdbLength; ++Idx) { Request->Cdb[Idx] = ((UINT8 *) Packet->Cdb)[Idx]; } return EFI_SUCCESS; } /** Parse the virtio-scsi device's response, translate it to an EFI status code, and update the Extended SCSI Pass Thru Protocol packet, to be returned by the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() implementation. @param[in out] Packet The Extended SCSI Pass Thru Protocol packet that has been translated to a virtio-scsi request with PopulateRequest(), and processed by the host. On output this parameter is updated with response or error contents. @param[in] Response The virtio-scsi response structure to parse. We expect it to come from a virtio ring, thus it is qualified volatile. @return PassThru() status codes mandated by UEFI Spec 2.3.1 + Errata C, 14.7 Extended SCSI Pass Thru Protocol. **/ STATIC EFI_STATUS EFIAPI ParseResponse ( IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, IN CONST volatile VIRTIO_SCSI_RESP *Response ) { UINTN ResponseSenseLen; UINTN Idx; // // return sense data (length and contents) in all cases, truncated if needed // ResponseSenseLen = MIN (Response->SenseLen, VIRTIO_SCSI_SENSE_SIZE); if (Packet->SenseDataLength > ResponseSenseLen) { Packet->SenseDataLength = (UINT8) ResponseSenseLen; } for (Idx = 0; Idx < Packet->SenseDataLength; ++Idx) { ((UINT8 *) Packet->SenseData)[Idx] = Response->Sense[Idx]; } // // Report actual transfer lengths. The logic below covers all three // DataDirections (read, write, bidirectional). // // -+- @ 0 // | // | write ^ @ Residual (unprocessed) // | | // -+- @ OutTransferLength -+- @ InTransferLength // | | // | read | // | | // V @ OutTransferLength + InTransferLength -+- @ 0 // if (Response->Residual <= Packet->InTransferLength) { Packet->InTransferLength -= Response->Residual; } else { Packet->OutTransferLength -= Response->Residual - Packet->InTransferLength; Packet->InTransferLength = 0; } // // report target status in all cases // Packet->TargetStatus = Response->Status; // // host adapter status and function return value depend on virtio-scsi // response code // switch (Response->Response) { case VIRTIO_SCSI_S_OK: Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OK; return EFI_SUCCESS; case VIRTIO_SCSI_S_OVERRUN: Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN; break; case VIRTIO_SCSI_S_BAD_TARGET: // // This is non-intuitive but explicitly required by the // EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() specification for // disconnected (but otherwise valid) target / LUN addresses. // Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND; return EFI_TIMEOUT; case VIRTIO_SCSI_S_RESET: Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_BUS_RESET; break; case VIRTIO_SCSI_S_BUSY: Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OK; return EFI_NOT_READY; // // Lump together the rest. The mapping for VIRTIO_SCSI_S_ABORTED is // intentional as well, not an oversight. // case VIRTIO_SCSI_S_ABORTED: case VIRTIO_SCSI_S_TRANSPORT_FAILURE: case VIRTIO_SCSI_S_TARGET_FAILURE: case VIRTIO_SCSI_S_NEXUS_FAILURE: case VIRTIO_SCSI_S_FAILURE: default: Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OTHER; } return EFI_DEVICE_ERROR; } // // The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL // for the virtio-scsi HBA. Refer to UEFI Spec 2.3.1 + Errata C, sections // - 14.1 SCSI Driver Model Overview, // - 14.7 Extended SCSI Pass Thru Protocol. // EFI_STATUS EFIAPI VirtioScsiPassThru ( IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, IN UINT8 *Target, IN UINT64 Lun, IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, IN EFI_EVENT Event OPTIONAL ) { VSCSI_DEV *Dev; UINT16 TargetValue; EFI_STATUS Status; volatile VIRTIO_SCSI_REQ Request; volatile VIRTIO_SCSI_RESP Response; DESC_INDICES Indices; ZeroMem ((VOID*) &Request, sizeof (Request)); ZeroMem ((VOID*) &Response, sizeof (Response)); Dev = VIRTIO_SCSI_FROM_PASS_THRU (This); CopyMem (&TargetValue, Target, sizeof TargetValue); Status = PopulateRequest (Dev, TargetValue, Lun, Packet, &Request); if (EFI_ERROR (Status)) { return Status; } VirtioPrepare (&Dev->Ring, &Indices); // // preset a host status for ourselves that we do not accept as success // Response.Response = VIRTIO_SCSI_S_FAILURE; // // ensured by VirtioScsiInit() -- this predicate, in combination with the // lock-step progress, ensures we don't have to track free descriptors. // ASSERT (Dev->Ring.QueueSize >= 4); // // enqueue Request // VirtioAppendDesc (&Dev->Ring, (UINTN) &Request, sizeof Request, VRING_DESC_F_NEXT, &Indices); // // enqueue "dataout" if any // if (Packet->OutTransferLength > 0) { VirtioAppendDesc (&Dev->Ring, (UINTN) Packet->OutDataBuffer, Packet->OutTransferLength, VRING_DESC_F_NEXT, &Indices); } // // enqueue Response, to be written by the host // VirtioAppendDesc (&Dev->Ring, (UINTN) &Response, sizeof Response, VRING_DESC_F_WRITE | (Packet->InTransferLength > 0 ? VRING_DESC_F_NEXT : 0), &Indices); // // enqueue "datain" if any, to be written by the host // if (Packet->InTransferLength > 0) { VirtioAppendDesc (&Dev->Ring, (UINTN) Packet->InDataBuffer, Packet->InTransferLength, VRING_DESC_F_WRITE, &Indices); } // If kicking the host fails, we must fake a host adapter error. // EFI_NOT_READY would save us the effort, but it would also suggest that the // caller retry. // if (VirtioFlush (Dev->PciIo, VIRTIO_SCSI_REQUEST_QUEUE, &Dev->Ring, &Indices) != EFI_SUCCESS) { Packet->InTransferLength = 0; Packet->OutTransferLength = 0; Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OTHER; Packet->TargetStatus = EFI_EXT_SCSI_STATUS_TARGET_GOOD; Packet->SenseDataLength = 0; return EFI_DEVICE_ERROR; } return ParseResponse (Packet, &Response); } EFI_STATUS EFIAPI VirtioScsiGetNextTargetLun ( IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, IN OUT UINT8 **TargetPointer, IN OUT UINT64 *Lun ) { UINT8 *Target; UINTN Idx; UINT16 LastTarget; VSCSI_DEV *Dev; // // the TargetPointer input parameter is unnecessarily a pointer-to-pointer // Target = *TargetPointer; // // Search for first non-0xFF byte. If not found, return first target & LUN. // for (Idx = 0; Idx < TARGET_MAX_BYTES && Target[Idx] == 0xFF; ++Idx) ; if (Idx == TARGET_MAX_BYTES) { SetMem (Target, TARGET_MAX_BYTES, 0x00); *Lun = 0; return EFI_SUCCESS; } // // see the TARGET_MAX_BYTES check in "VirtioScsi.h" // CopyMem (&LastTarget, Target, sizeof LastTarget); // // increment (target, LUN) pair if valid on input // Dev = VIRTIO_SCSI_FROM_PASS_THRU (This); if (LastTarget > Dev->MaxTarget || *Lun > Dev->MaxLun) { return EFI_INVALID_PARAMETER; } if (*Lun < Dev->MaxLun) { ++*Lun; return EFI_SUCCESS; } if (LastTarget < Dev->MaxTarget) { *Lun = 0; ++LastTarget; CopyMem (Target, &LastTarget, sizeof LastTarget); return EFI_SUCCESS; } return EFI_NOT_FOUND; } EFI_STATUS EFIAPI VirtioScsiBuildDevicePath ( IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, IN UINT8 *Target, IN UINT64 Lun, IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath ) { UINT16 TargetValue; VSCSI_DEV *Dev; SCSI_DEVICE_PATH *ScsiDevicePath; if (DevicePath == NULL) { return EFI_INVALID_PARAMETER; } CopyMem (&TargetValue, Target, sizeof TargetValue); Dev = VIRTIO_SCSI_FROM_PASS_THRU (This); if (TargetValue > Dev->MaxTarget || Lun > Dev->MaxLun || Lun > 0xFFFF) { return EFI_NOT_FOUND; } ScsiDevicePath = AllocatePool (sizeof *ScsiDevicePath); if (ScsiDevicePath == NULL) { return EFI_OUT_OF_RESOURCES; } ScsiDevicePath->Header.Type = MESSAGING_DEVICE_PATH; ScsiDevicePath->Header.SubType = MSG_SCSI_DP; ScsiDevicePath->Header.Length[0] = (UINT8) sizeof *ScsiDevicePath; ScsiDevicePath->Header.Length[1] = (UINT8) (sizeof *ScsiDevicePath >> 8); ScsiDevicePath->Pun = TargetValue; ScsiDevicePath->Lun = (UINT16) Lun; *DevicePath = &ScsiDevicePath->Header; return EFI_SUCCESS; } EFI_STATUS EFIAPI VirtioScsiGetTargetLun ( IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, OUT UINT8 **TargetPointer, OUT UINT64 *Lun ) { SCSI_DEVICE_PATH *ScsiDevicePath; VSCSI_DEV *Dev; UINT8 *Target; if (DevicePath == NULL || TargetPointer == NULL || *TargetPointer == NULL || Lun == NULL) { return EFI_INVALID_PARAMETER; } if (DevicePath->Type != MESSAGING_DEVICE_PATH || DevicePath->SubType != MSG_SCSI_DP) { return EFI_UNSUPPORTED; } ScsiDevicePath = (SCSI_DEVICE_PATH *) DevicePath; Dev = VIRTIO_SCSI_FROM_PASS_THRU (This); if (ScsiDevicePath->Pun > Dev->MaxTarget || ScsiDevicePath->Lun > Dev->MaxLun) { return EFI_NOT_FOUND; } // // a) the TargetPointer input parameter is unnecessarily a pointer-to-pointer // b) see the TARGET_MAX_BYTES check in "VirtioScsi.h" // c) ScsiDevicePath->Pun is an UINT16 // Target = *TargetPointer; CopyMem (Target, &ScsiDevicePath->Pun, 2); SetMem (Target + 2, TARGET_MAX_BYTES - 2, 0x00); *Lun = ScsiDevicePath->Lun; return EFI_SUCCESS; } EFI_STATUS EFIAPI VirtioScsiResetChannel ( IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This ) { return EFI_UNSUPPORTED; } EFI_STATUS EFIAPI VirtioScsiResetTargetLun ( IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, IN UINT8 *Target, IN UINT64 Lun ) { return EFI_UNSUPPORTED; } EFI_STATUS EFIAPI VirtioScsiGetNextTarget ( IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, IN OUT UINT8 **TargetPointer ) { UINT8 *Target; UINTN Idx; UINT16 LastTarget; VSCSI_DEV *Dev; // // the TargetPointer input parameter is unnecessarily a pointer-to-pointer // Target = *TargetPointer; // // Search for first non-0xFF byte. If not found, return first target. // for (Idx = 0; Idx < TARGET_MAX_BYTES && Target[Idx] == 0xFF; ++Idx) ; if (Idx == TARGET_MAX_BYTES) { SetMem (Target, TARGET_MAX_BYTES, 0x00); return EFI_SUCCESS; } // // see the TARGET_MAX_BYTES check in "VirtioScsi.h" // CopyMem (&LastTarget, Target, sizeof LastTarget); // // increment target if valid on input // Dev = VIRTIO_SCSI_FROM_PASS_THRU (This); if (LastTarget > Dev->MaxTarget) { return EFI_INVALID_PARAMETER; } if (LastTarget < Dev->MaxTarget) { ++LastTarget; CopyMem (Target, &LastTarget, sizeof LastTarget); return EFI_SUCCESS; } return EFI_NOT_FOUND; } STATIC EFI_STATUS EFIAPI VirtioScsiInit ( IN OUT VSCSI_DEV *Dev ) { UINT8 NextDevStat; EFI_STATUS Status; UINT32 Features; UINT16 MaxChannel; // for validation only UINT32 NumQueues; // for validation only UINT16 QueueSize; // // Execute virtio-0.9.5, 2.2.1 Device Initialization Sequence. // NextDevStat = 0; // step 1 -- reset device Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat); if (EFI_ERROR (Status)) { goto Failed; } NextDevStat |= VSTAT_ACK; // step 2 -- acknowledge device presence Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat); if (EFI_ERROR (Status)) { goto Failed; } NextDevStat |= VSTAT_DRIVER; // step 3 -- we know how to drive it Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat); if (EFI_ERROR (Status)) { goto Failed; } // // step 4a -- retrieve and validate features // Status = VIRTIO_CFG_READ (Dev, Generic.VhdrDeviceFeatureBits, &Features); if (EFI_ERROR (Status)) { goto Failed; } Dev->InOutSupported = !!(Features & VIRTIO_SCSI_F_INOUT); Status = VIRTIO_CFG_READ (Dev, VhdrMaxChannel, &MaxChannel); if (EFI_ERROR (Status)) { goto Failed; } if (MaxChannel != 0) { // // this driver is for a single-channel virtio-scsi HBA // Status = EFI_UNSUPPORTED; goto Failed; } Status = VIRTIO_CFG_READ (Dev, VhdrNumQueues, &NumQueues); if (EFI_ERROR (Status)) { goto Failed; } if (NumQueues < 1) { Status = EFI_UNSUPPORTED; goto Failed; } Status = VIRTIO_CFG_READ (Dev, VhdrMaxTarget, &Dev->MaxTarget); if (EFI_ERROR (Status)) { goto Failed; } if (Dev->MaxTarget > PcdGet16 (PcdVirtioScsiMaxTargetLimit)) { Dev->MaxTarget = PcdGet16 (PcdVirtioScsiMaxTargetLimit); } Status = VIRTIO_CFG_READ (Dev, VhdrMaxLun, &Dev->MaxLun); if (EFI_ERROR (Status)) { goto Failed; } if (Dev->MaxLun > PcdGet32 (PcdVirtioScsiMaxLunLimit)) { Dev->MaxLun = PcdGet32 (PcdVirtioScsiMaxLunLimit); } Status = VIRTIO_CFG_READ (Dev, VhdrMaxSectors, &Dev->MaxSectors); if (EFI_ERROR (Status)) { goto Failed; } if (Dev->MaxSectors < 2) { // // We must be able to halve it for bidirectional transfers // (see EFI_BAD_BUFFER_SIZE in PopulateRequest()). // Status = EFI_UNSUPPORTED; goto Failed; } // // step 4b -- allocate request virtqueue // Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrQueueSelect, VIRTIO_SCSI_REQUEST_QUEUE); if (EFI_ERROR (Status)) { goto Failed; } Status = VIRTIO_CFG_READ (Dev, Generic.VhdrQueueSize, &QueueSize); if (EFI_ERROR (Status)) { goto Failed; } // // VirtioScsiPassThru() uses at most four descriptors // if (QueueSize < 4) { Status = EFI_UNSUPPORTED; goto Failed; } Status = VirtioRingInit (QueueSize, &Dev->Ring); if (EFI_ERROR (Status)) { goto Failed; } // // step 4c -- Report GPFN (guest-physical frame number) of queue. If anything // fails from here on, we must release the ring resources. // Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrQueueAddress, (UINTN) Dev->Ring.Base >> EFI_PAGE_SHIFT); if (EFI_ERROR (Status)) { goto ReleaseQueue; } // // step 5 -- Report understood features and guest-tuneables. We want none of // the known (or unknown) VIRTIO_SCSI_F_* or VIRTIO_F_* capabilities (see // virtio-0.9.5, Appendices B and I), except bidirectional transfers. // Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrGuestFeatureBits, Features & VIRTIO_SCSI_F_INOUT); if (EFI_ERROR (Status)) { goto ReleaseQueue; } // // We expect these maximum sizes from the host. Since they are // guest-negotiable, ask for them rather than just checking them. // Status = VIRTIO_CFG_WRITE (Dev, VhdrCdbSize, VIRTIO_SCSI_CDB_SIZE); if (EFI_ERROR (Status)) { goto ReleaseQueue; } Status = VIRTIO_CFG_WRITE (Dev, VhdrSenseSize, VIRTIO_SCSI_SENSE_SIZE); if (EFI_ERROR (Status)) { goto ReleaseQueue; } // // step 6 -- initialization complete // NextDevStat |= VSTAT_DRIVER_OK; Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat); if (EFI_ERROR (Status)) { goto ReleaseQueue; } // // populate the exported interface's attributes // Dev->PassThru.Mode = &Dev->PassThruMode; Dev->PassThru.PassThru = &VirtioScsiPassThru; Dev->PassThru.GetNextTargetLun = &VirtioScsiGetNextTargetLun; Dev->PassThru.BuildDevicePath = &VirtioScsiBuildDevicePath; Dev->PassThru.GetTargetLun = &VirtioScsiGetTargetLun; Dev->PassThru.ResetChannel = &VirtioScsiResetChannel; Dev->PassThru.ResetTargetLun = &VirtioScsiResetTargetLun; Dev->PassThru.GetNextTarget = &VirtioScsiGetNextTarget; // // AdapterId is a target for which no handle will be created during bus scan. // Prevent any conflict with real devices. // Dev->PassThruMode.AdapterId = 0xFFFFFFFF; // // Set both physical and logical attributes for non-RAID SCSI channel. See // Driver Writer's Guide for UEFI 2.3.1 v1.01, 20.1.5 Implementing Extended // SCSI Pass Thru Protocol. // Dev->PassThruMode.Attributes = EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL; // // no restriction on transfer buffer alignment // Dev->PassThruMode.IoAlign = 0; return EFI_SUCCESS; ReleaseQueue: VirtioRingUninit (&Dev->Ring); Failed: // // Notify the host about our failure to setup: virtio-0.9.5, 2.2.2.1 Device // Status. PCI IO access failure here should not mask the original error. // NextDevStat |= VSTAT_FAILED; VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat); Dev->InOutSupported = FALSE; Dev->MaxTarget = 0; Dev->MaxLun = 0; Dev->MaxSectors = 0; return Status; // reached only via Failed above } STATIC VOID EFIAPI VirtioScsiUninit ( IN OUT VSCSI_DEV *Dev ) { // // Reset the virtual device -- see virtio-0.9.5, 2.2.2.1 Device Status. When // VIRTIO_CFG_WRITE() returns, the host will have learned to stay away from // the old comms area. // VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, 0); Dev->InOutSupported = FALSE; Dev->MaxTarget = 0; Dev->MaxLun = 0; Dev->MaxSectors = 0; VirtioRingUninit (&Dev->Ring); SetMem (&Dev->PassThru, sizeof Dev->PassThru, 0x00); SetMem (&Dev->PassThruMode, sizeof Dev->PassThruMode, 0x00); } // // Probe, start and stop functions of this driver, called by the DXE core for // specific devices. // // The following specifications document these interfaces: // - Driver Writer's Guide for UEFI 2.3.1 v1.01, 9 Driver Binding Protocol // - UEFI Spec 2.3.1 + Errata C, 10.1 EFI Driver Binding Protocol // // The implementation follows: // - Driver Writer's Guide for UEFI 2.3.1 v1.01 // - 5.1.3.4 OpenProtocol() and CloseProtocol() // - 18 PCI Driver Design Guidelines // - 18.3 PCI drivers // - UEFI Spec 2.3.1 + Errata C // - 6.3 Protocol Handler Services // - 13.4 EFI PCI I/O Protocol // EFI_STATUS EFIAPI VirtioScsiDriverBindingSupported ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE DeviceHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ) { EFI_STATUS Status; EFI_PCI_IO_PROTOCOL *PciIo; PCI_TYPE00 Pci; // // Attempt to open the device with the PciIo set of interfaces. On success, // the protocol is "instantiated" for the PCI device. Covers duplicate open // attempts (EFI_ALREADY_STARTED). // Status = gBS->OpenProtocol ( DeviceHandle, // candidate device &gEfiPciIoProtocolGuid, // for generic PCI access (VOID **)&PciIo, // handle to instantiate This->DriverBindingHandle, // requestor driver identity DeviceHandle, // ControllerHandle, according to // the UEFI Driver Model EFI_OPEN_PROTOCOL_BY_DRIVER // get exclusive PciIo access to // the device; to be released ); if (EFI_ERROR (Status)) { return Status; } // // Read entire PCI configuration header for more extensive check ahead. // Status = PciIo->Pci.Read ( PciIo, // (protocol, device) // handle EfiPciIoWidthUint32, // access width & copy // mode 0, // Offset sizeof Pci / sizeof (UINT32), // Count &Pci // target buffer ); if (Status == EFI_SUCCESS) { // // virtio-0.9.5, 2.1 PCI Discovery // Status = (Pci.Hdr.VendorId == 0x1AF4 && Pci.Hdr.DeviceId >= 0x1000 && Pci.Hdr.DeviceId <= 0x103F && Pci.Hdr.RevisionID == 0x00 && Pci.Device.SubsystemID == 0x08) ? EFI_SUCCESS : EFI_UNSUPPORTED; } // // We needed PCI IO access only transitorily, to see whether we support the // device or not. // gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid, This->DriverBindingHandle, DeviceHandle); return Status; } EFI_STATUS EFIAPI VirtioScsiDriverBindingStart ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE DeviceHandle, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ) { VSCSI_DEV *Dev; EFI_STATUS Status; Dev = (VSCSI_DEV *) AllocateZeroPool (sizeof *Dev); if (Dev == NULL) { return EFI_OUT_OF_RESOURCES; } Status = gBS->OpenProtocol (DeviceHandle, &gEfiPciIoProtocolGuid, (VOID **)&Dev->PciIo, This->DriverBindingHandle, DeviceHandle, EFI_OPEN_PROTOCOL_BY_DRIVER); if (EFI_ERROR (Status)) { goto FreeVirtioScsi; } // // We must retain and ultimately restore the original PCI attributes of the // device. See Driver Writer's Guide for UEFI 2.3.1 v1.01, 18.3 PCI drivers / // 18.3.2 Start() and Stop(). // // The third parameter ("Attributes", input) is ignored by the Get operation. // The fourth parameter ("Result", output) is ignored by the Enable and Set // operations. // // For virtio-scsi we only need IO space access. // Status = Dev->PciIo->Attributes (Dev->PciIo, EfiPciIoAttributeOperationGet, 0, &Dev->OriginalPciAttributes); if (EFI_ERROR (Status)) { goto ClosePciIo; } Status = Dev->PciIo->Attributes (Dev->PciIo, EfiPciIoAttributeOperationEnable, EFI_PCI_IO_ATTRIBUTE_IO, NULL); if (EFI_ERROR (Status)) { goto ClosePciIo; } // // PCI IO access granted, configure virtio-scsi device. // Status = VirtioScsiInit (Dev); if (EFI_ERROR (Status)) { goto RestorePciAttributes; } // // Setup complete, attempt to export the driver instance's PassThru // interface. // Dev->Signature = VSCSI_SIG; Status = gBS->InstallProtocolInterface (&DeviceHandle, &gEfiExtScsiPassThruProtocolGuid, EFI_NATIVE_INTERFACE, &Dev->PassThru); if (EFI_ERROR (Status)) { goto UninitDev; } return EFI_SUCCESS; UninitDev: VirtioScsiUninit (Dev); RestorePciAttributes: Dev->PciIo->Attributes (Dev->PciIo, EfiPciIoAttributeOperationSet, Dev->OriginalPciAttributes, NULL); ClosePciIo: gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid, This->DriverBindingHandle, DeviceHandle); FreeVirtioScsi: FreePool (Dev); return Status; } EFI_STATUS EFIAPI VirtioScsiDriverBindingStop ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE DeviceHandle, IN UINTN NumberOfChildren, IN EFI_HANDLE *ChildHandleBuffer ) { EFI_STATUS Status; EFI_EXT_SCSI_PASS_THRU_PROTOCOL *PassThru; VSCSI_DEV *Dev; Status = gBS->OpenProtocol ( DeviceHandle, // candidate device &gEfiExtScsiPassThruProtocolGuid, // retrieve the SCSI iface (VOID **)&PassThru, // target pointer This->DriverBindingHandle, // requestor driver ident. DeviceHandle, // lookup req. for dev. EFI_OPEN_PROTOCOL_GET_PROTOCOL // lookup only, no new ref. ); if (EFI_ERROR (Status)) { return Status; } Dev = VIRTIO_SCSI_FROM_PASS_THRU (PassThru); // // Handle Stop() requests for in-use driver instances gracefully. // Status = gBS->UninstallProtocolInterface (DeviceHandle, &gEfiExtScsiPassThruProtocolGuid, &Dev->PassThru); if (EFI_ERROR (Status)) { return Status; } VirtioScsiUninit (Dev); Dev->PciIo->Attributes (Dev->PciIo, EfiPciIoAttributeOperationSet, Dev->OriginalPciAttributes, NULL); gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid, This->DriverBindingHandle, DeviceHandle); FreePool (Dev); return EFI_SUCCESS; } // // The static object that groups the Supported() (ie. probe), Start() and // Stop() functions of the driver together. Refer to UEFI Spec 2.3.1 + Errata // C, 10.1 EFI Driver Binding Protocol. // STATIC EFI_DRIVER_BINDING_PROTOCOL gDriverBinding = { &VirtioScsiDriverBindingSupported, &VirtioScsiDriverBindingStart, &VirtioScsiDriverBindingStop, 0x10, // Version, must be in [0x10 .. 0xFFFFFFEF] for IHV-developed drivers NULL, // ImageHandle, to be overwritten by // EfiLibInstallDriverBindingComponentName2() in VirtioScsiEntryPoint() NULL // DriverBindingHandle, ditto }; // // The purpose of the following scaffolding (EFI_COMPONENT_NAME_PROTOCOL and // EFI_COMPONENT_NAME2_PROTOCOL implementation) is to format the driver's name // in English, for display on standard console devices. This is recommended for // UEFI drivers that follow the UEFI Driver Model. Refer to the Driver Writer's // Guide for UEFI 2.3.1 v1.01, 11 UEFI Driver and Controller Names. // // Device type names ("Virtio SCSI Host Device") are not formatted because the // driver supports only that device type. Therefore the driver name suffices // for unambiguous identification. // STATIC EFI_UNICODE_STRING_TABLE mDriverNameTable[] = { { "eng;en", L"Virtio SCSI Host Driver" }, { NULL, NULL } }; STATIC EFI_COMPONENT_NAME_PROTOCOL gComponentName; EFI_STATUS EFIAPI VirtioScsiGetDriverName ( IN EFI_COMPONENT_NAME_PROTOCOL *This, IN CHAR8 *Language, OUT CHAR16 **DriverName ) { return LookupUnicodeString2 ( Language, This->SupportedLanguages, mDriverNameTable, DriverName, (BOOLEAN)(This == &gComponentName) // Iso639Language ); } EFI_STATUS EFIAPI VirtioScsiGetDeviceName ( IN EFI_COMPONENT_NAME_PROTOCOL *This, IN EFI_HANDLE DeviceHandle, IN EFI_HANDLE ChildHandle, IN CHAR8 *Language, OUT CHAR16 **ControllerName ) { return EFI_UNSUPPORTED; } STATIC EFI_COMPONENT_NAME_PROTOCOL gComponentName = { &VirtioScsiGetDriverName, &VirtioScsiGetDeviceName, "eng" // SupportedLanguages, ISO 639-2 language codes }; STATIC EFI_COMPONENT_NAME2_PROTOCOL gComponentName2 = { (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) &VirtioScsiGetDriverName, (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) &VirtioScsiGetDeviceName, "en" // SupportedLanguages, RFC 4646 language codes }; // // Entry point of this driver. // EFI_STATUS EFIAPI VirtioScsiEntryPoint ( IN EFI_HANDLE ImageHandle, IN EFI_SYSTEM_TABLE *SystemTable ) { return EfiLibInstallDriverBindingComponentName2 ( ImageHandle, SystemTable, &gDriverBinding, ImageHandle, &gComponentName, &gComponentName2 ); }