/** @file

  Copyright (c) 2011-2018, ARM Ltd. All rights reserved.<BR>
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <PiDxe.h>

#include <Library/ArmPlatformSysConfigLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/DebugLib.h>
#include <Library/DxeServicesTableLib.h>
#include <Library/LcdPlatformLib.h>
#include <Library/UefiBootServicesTableLib.h>

#include <Protocol/EdidDiscovered.h>
#include <Protocol/EdidActive.h>

#include <ArmPlatform.h>

typedef struct {
  UINT32                     Mode;
  UINT32                     HorizontalResolution;
  UINT32                     VerticalResolution;
  LCD_BPP                    Bpp;
  UINT32                     OscFreq;

  UINT32                     HSync;
  UINT32                     HBackPorch;
  UINT32                     HFrontPorch;
  UINT32                     VSync;
  UINT32                     VBackPorch;
  UINT32                     VFrontPorch;
} LCD_RESOLUTION;

/** The display modes supported by the platform.
**/
LCD_RESOLUTION mResolutions[] = {
  { // Mode 0 : VGA : 640 x 480 x 24 bpp
    VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    VGA_OSC_FREQUENCY,
    VGA_H_SYNC, VGA_H_BACK_PORCH, VGA_H_FRONT_PORCH,
    VGA_V_SYNC, VGA_V_BACK_PORCH, VGA_V_FRONT_PORCH
  },
  { // Mode 1 : SVGA : 800 x 600 x 24 bpp
    SVGA, SVGA_H_RES_PIXELS, SVGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    SVGA_OSC_FREQUENCY,
    SVGA_H_SYNC, SVGA_H_BACK_PORCH, SVGA_H_FRONT_PORCH,
    SVGA_V_SYNC, SVGA_V_BACK_PORCH, SVGA_V_FRONT_PORCH
  },
  { // Mode 2 : XGA : 1024 x 768 x 24 bpp
    XGA, XGA_H_RES_PIXELS, XGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    XGA_OSC_FREQUENCY,
    XGA_H_SYNC, XGA_H_BACK_PORCH, XGA_H_FRONT_PORCH,
    XGA_V_SYNC, XGA_V_BACK_PORCH, XGA_V_FRONT_PORCH
  },
  { // Mode 3 : SXGA : 1280 x 1024 x 24 bpp
    SXGA, SXGA_H_RES_PIXELS, SXGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    (SXGA_OSC_FREQUENCY/2),
    SXGA_H_SYNC, SXGA_H_BACK_PORCH, SXGA_H_FRONT_PORCH,
    SXGA_V_SYNC, SXGA_V_BACK_PORCH, SXGA_V_FRONT_PORCH
  },
  { // Mode 4 : UXGA : 1600 x 1200 x 24 bpp
    UXGA, UXGA_H_RES_PIXELS, UXGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    (UXGA_OSC_FREQUENCY/2),
    UXGA_H_SYNC, UXGA_H_BACK_PORCH, UXGA_H_FRONT_PORCH,
    UXGA_V_SYNC, UXGA_V_BACK_PORCH, UXGA_V_FRONT_PORCH
  },
  { // Mode 5 : HD : 1920 x 1080 x 24 bpp
    HD, HD_H_RES_PIXELS, HD_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
    (HD_OSC_FREQUENCY/2),
    HD_H_SYNC, HD_H_BACK_PORCH, HD_H_FRONT_PORCH,
    HD_V_SYNC, HD_V_BACK_PORCH, HD_V_FRONT_PORCH
  },
  { // Mode 6 : VGA : 640 x 480 x 16 bpp (565 Mode)
    VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_16_565,
    VGA_OSC_FREQUENCY,
    VGA_H_SYNC, VGA_H_BACK_PORCH, VGA_H_FRONT_PORCH,
    VGA_V_SYNC, VGA_V_BACK_PORCH, VGA_V_FRONT_PORCH
  },
  { // Mode 7 : SVGA : 800 x 600 x 16 bpp (565 Mode)
    SVGA, SVGA_H_RES_PIXELS, SVGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_16_565,
    SVGA_OSC_FREQUENCY,
    SVGA_H_SYNC, SVGA_H_BACK_PORCH, SVGA_H_FRONT_PORCH,
    SVGA_V_SYNC, SVGA_V_BACK_PORCH, SVGA_V_FRONT_PORCH
  },
  { // Mode 8 : XGA : 1024 x 768 x 16 bpp (565 Mode)
    XGA, XGA_H_RES_PIXELS, XGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_16_565,
    XGA_OSC_FREQUENCY,
    XGA_H_SYNC, XGA_H_BACK_PORCH, XGA_H_FRONT_PORCH,
    XGA_V_SYNC, XGA_V_BACK_PORCH, XGA_V_FRONT_PORCH
  },
  { // Mode 9 : VGA : 640 x 480 x 15 bpp
    VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_16_555,
    VGA_OSC_FREQUENCY,
    VGA_H_SYNC, VGA_H_BACK_PORCH, VGA_H_FRONT_PORCH,
    VGA_V_SYNC, VGA_V_BACK_PORCH, VGA_V_FRONT_PORCH
  },
  { // Mode 10 : SVGA : 800 x 600 x 15 bpp
    SVGA, SVGA_H_RES_PIXELS, SVGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_16_555,
    SVGA_OSC_FREQUENCY,
    SVGA_H_SYNC, SVGA_H_BACK_PORCH, SVGA_H_FRONT_PORCH,
    SVGA_V_SYNC, SVGA_V_BACK_PORCH, SVGA_V_FRONT_PORCH
  },
  { // Mode 11 : XGA : 1024 x 768 x 15 bpp
    XGA, XGA_H_RES_PIXELS, XGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_16_555,
    XGA_OSC_FREQUENCY,
    XGA_H_SYNC, XGA_H_BACK_PORCH, XGA_H_FRONT_PORCH,
    XGA_V_SYNC, XGA_V_BACK_PORCH, XGA_V_FRONT_PORCH
  },
  { // Mode 12 : XGA : 1024 x 768 x 15 bpp - All the timing info is derived from Linux Kernel Driver Settings
    XGA, XGA_H_RES_PIXELS, XGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_16_555,
    63500000,
    XGA_H_SYNC, XGA_H_BACK_PORCH, XGA_H_FRONT_PORCH,
    XGA_V_SYNC, XGA_V_BACK_PORCH, XGA_V_FRONT_PORCH
  },
  { // Mode 13 : VGA : 640 x 480 x 12 bpp (444 Mode)
    VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_12_444,
    VGA_OSC_FREQUENCY,
    VGA_H_SYNC, VGA_H_BACK_PORCH, VGA_H_FRONT_PORCH,
    VGA_V_SYNC, VGA_V_BACK_PORCH, VGA_V_FRONT_PORCH
  },
  { // Mode 14 : SVGA : 800 x 600 x 12 bpp (444 Mode)
    SVGA, SVGA_H_RES_PIXELS, SVGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_12_444,
    SVGA_OSC_FREQUENCY,
    SVGA_H_SYNC, SVGA_H_BACK_PORCH, SVGA_H_FRONT_PORCH,
    SVGA_V_SYNC, SVGA_V_BACK_PORCH, SVGA_V_FRONT_PORCH
  },
  { // Mode 15 : XGA : 1024 x 768 x 12 bpp (444 Mode)
    XGA, XGA_H_RES_PIXELS, XGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_12_444,
    XGA_OSC_FREQUENCY,
    XGA_H_SYNC, XGA_H_BACK_PORCH, XGA_H_FRONT_PORCH,
    XGA_V_SYNC, XGA_V_BACK_PORCH, XGA_V_FRONT_PORCH
  }
};

EFI_EDID_DISCOVERED_PROTOCOL  mEdidDiscovered = {
  0,
  NULL
};

EFI_EDID_ACTIVE_PROTOCOL      mEdidActive = {
  0,
  NULL
};

/** PL111 Platform specific initialization function.

  @param[in] Handle              Handle to the LCD device instance.
  @retval EFI_SUCCESS            Plaform library initialized successfully.
  @retval !(EFI_SUCCESS)         Other errors.
**/
EFI_STATUS
LcdPlatformInitializeDisplay (
  IN EFI_HANDLE   Handle
  )
{
  EFI_STATUS  Status;

  // Set the FPGA multiplexer to select the video output from the motherboard
  // or the daughterboard
  Status = ArmPlatformSysConfigSet (SYS_CFG_MUXFPGA, PL111_CLCD_SITE);
  if (!EFI_ERROR (Status)) {
    // Install the EDID Protocols
    Status = gBS->InstallMultipleProtocolInterfaces (
                    &Handle,
                    &gEfiEdidDiscoveredProtocolGuid,
                    &mEdidDiscovered,
                    &gEfiEdidActiveProtocolGuid,
                    &mEdidActive,
                    NULL
                    );
  }

  return Status;
}

/** Allocate VRAM memory in DRAM for the framebuffer
  (unless it is reserved already).

  The allocated address can be used to set the framebuffer.

  @param[out] VramBaseAddress     A pointer to the framebuffer address.
  @param[out] VramSize            A pointer to the size of the framebuffer
                                  in bytes

  @retval EFI_SUCCESS             Framebuffer memory allocated successfully.
  @retval !(EFI_SUCCESS)          Other errors.
**/
EFI_STATUS
LcdPlatformGetVram (
  OUT EFI_PHYSICAL_ADDRESS*  VramBaseAddress,
  OUT UINTN*                 VramSize
  )
{
  EFI_STATUS              Status;

  ASSERT (VramBaseAddress != NULL);
  ASSERT (VramSize != NULL);

  // Is it on the motherboard or on the daughterboard?
  switch (PL111_CLCD_SITE) {

  case ARM_VE_MOTHERBOARD_SITE:
    *VramBaseAddress = (EFI_PHYSICAL_ADDRESS)PL111_CLCD_VRAM_MOTHERBOARD_BASE;
    *VramSize = LCD_VRAM_SIZE;
    Status = EFI_SUCCESS;
    break;

  case ARM_VE_DAUGHTERBOARD_1_SITE:
    *VramBaseAddress = (EFI_PHYSICAL_ADDRESS)LCD_VRAM_CORE_TILE_BASE;
    *VramSize = LCD_VRAM_SIZE;

    // Allocate the VRAM from the DRAM so that nobody else uses it.
    Status = gBS->AllocatePages (
                    AllocateAddress,
                    EfiBootServicesData,
                    EFI_SIZE_TO_PAGES (((UINTN)LCD_VRAM_SIZE)),
                    VramBaseAddress
                    );
    if (EFI_ERROR (Status)) {
      ASSERT_EFI_ERROR (Status);
      return Status;
    }

    // Mark the VRAM as write-combining.
    // The VRAM is inside the DRAM, which is cacheable.
    Status = gDS->SetMemorySpaceAttributes (
                    *VramBaseAddress,
                    *VramSize,
                    EFI_MEMORY_WC
                    );
    if (EFI_ERROR (Status)) {
      ASSERT_EFI_ERROR (Status);
      gBS->FreePages (*VramBaseAddress, EFI_SIZE_TO_PAGES (*VramSize));
    }
    break;

  default:
    // Unsupported site
    Status = EFI_UNSUPPORTED;
    break;
  }

  return Status;
}

/** Return total number of modes supported.

  Note: Valid mode numbers are 0 to MaxMode - 1
  See Section 12.9 of the UEFI Specification 2.7

  @retval UINT32             Mode Number.
**/
UINT32
LcdPlatformGetMaxMode (VOID)
{
  // The following line would correctly report the total number
  // of graphics modes supported by the PL111CLCD.
  // return (sizeof(mResolutions) / sizeof(CLCD_RESOLUTION)) - 1;

  // However, on some platforms it is desirable to ignore some graphics modes.
  // This could be because the specific implementation of PL111 has
  // certain limitations.

  // Set the maximum mode allowed
  return (PcdGet32 (PcdPL111LcdMaxMode));
}

/** Set the requested display mode.

  @param[in] ModeNumber            Mode Number.

  @retval  EFI_SUCCESS             Mode set successfully.
  @retval  EFI_INVALID_PARAMETER   Requested mode not found.
  @retval  EFI_UNSUPPORTED         PLL111 configuration not supported.
  @retval  !(EFI_SUCCESS)          Other errors.
**/
EFI_STATUS
LcdPlatformSetMode (
  IN UINT32                         ModeNumber
  )
{
  EFI_STATUS            Status;
  UINT32                OscillatorId;
  SYS_CONFIG_FUNCTION   Function;
  UINT32                SysId;

  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  switch (PL111_CLCD_SITE) {
  case ARM_VE_MOTHERBOARD_SITE:
    Function = SYS_CFG_OSC;
    OscillatorId = PL111_CLCD_MOTHERBOARD_VIDEO_MODE_OSC_ID;
    break;
  case ARM_VE_DAUGHTERBOARD_1_SITE:
    Function = SYS_CFG_OSC_SITE1;
    OscillatorId = (UINT32)PcdGet32 (PcdPL111LcdVideoModeOscId);
    break;
  default:
    return EFI_UNSUPPORTED;
  }

  // Set the video mode oscillator
  Status = ArmPlatformSysConfigSetDevice (
             Function,
             OscillatorId,
             mResolutions[ModeNumber].OscFreq
             );
  if (EFI_ERROR (Status)) {
    ASSERT_EFI_ERROR (Status);
    return Status;
  }

  // The FVP foundation model does not have an LCD.
  // On the FVP models, the build variant is encoded in bits [15:12].
  // Note: The DVI Mode is not modelled by RTSM or FVP models.
  SysId = MmioRead32 (ARM_VE_SYS_ID_REG);
  if (SysId != ARM_RTSM_SYS_ID) {
    // Ignore build variant and revision.
    SysId &= ~(ARM_FVP_SYS_ID_VARIANT_MASK | ARM_FVP_SYS_ID_REV_MASK);
    if (SysId != ARM_FVP_BASE_BOARD_SYS_ID) {
      // Set the DVI into the new mode
      Status = ArmPlatformSysConfigSet (
                 SYS_CFG_DVIMODE,
                 mResolutions[ModeNumber].Mode
                 );
      if (EFI_ERROR (Status)) {
        ASSERT_EFI_ERROR (Status);
        return Status;
      }
    }
  }

  // Set the multiplexer
  Status = ArmPlatformSysConfigSet (SYS_CFG_MUXFPGA, PL111_CLCD_SITE);
  ASSERT_EFI_ERROR (Status);

  return Status;
}

/** Return information for the requested mode number.

  @param[in]  ModeNumber         Mode Number.
  @param[out] Info               Pointer for returned mode information
                                 (on success).

  @retval EFI_SUCCESS             Mode information for the requested mode
                                  returned successfully.
  @retval EFI_INVALID_PARAMETER   Requested mode not found.
**/
EFI_STATUS
LcdPlatformQueryMode (
  IN  UINT32                                ModeNumber,
  OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  *Info
  )
{
  ASSERT (Info != NULL);

  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  Info->Version = 0;
  Info->HorizontalResolution = mResolutions[ModeNumber].HorizontalResolution;
  Info->VerticalResolution = mResolutions[ModeNumber].VerticalResolution;
  Info->PixelsPerScanLine = mResolutions[ModeNumber].HorizontalResolution;

  switch (mResolutions[ModeNumber].Bpp) {
  case LCD_BITS_PER_PIXEL_24:
    Info->PixelFormat                   = PixelRedGreenBlueReserved8BitPerColor;
    Info->PixelInformation.RedMask      = LCD_24BPP_RED_MASK;
    Info->PixelInformation.GreenMask    = LCD_24BPP_GREEN_MASK;
    Info->PixelInformation.BlueMask     = LCD_24BPP_BLUE_MASK;
    Info->PixelInformation.ReservedMask = LCD_24BPP_RESERVED_MASK;
    break;

  case LCD_BITS_PER_PIXEL_16_555:
  case LCD_BITS_PER_PIXEL_16_565:
  case LCD_BITS_PER_PIXEL_12_444:
  case LCD_BITS_PER_PIXEL_8:
  case LCD_BITS_PER_PIXEL_4:
  case LCD_BITS_PER_PIXEL_2:
  case LCD_BITS_PER_PIXEL_1:
  default:
    // These are not supported
    ASSERT (FALSE);
    break;
  }

  return EFI_SUCCESS;
}

/** Return display timing information for the requested mode number.

  @param[in]  ModeNumber          Mode Number.

  @param[out] HRes                Pointer to horizontal resolution.
  @param[out] HSync               Pointer to horizontal sync width.
  @param[out] HBackPorch          Pointer to horizontal back porch.
  @param[out] HFrontPorch         Pointer to horizontal front porch.
  @param[out] VRes                Pointer to vertical resolution.
  @param[out] VSync               Pointer to vertical sync width.
  @param[out] VBackPorch          Pointer to vertical back porch.
  @param[out] VFrontPorch         Pointer to vertical front porch.

  @retval EFI_SUCCESS             Display timing information for the requested
                                  mode returned successfully.
  @retval EFI_INVALID_PARAMETER   Requested mode not found.
**/
EFI_STATUS
LcdPlatformGetTimings (
  IN  UINT32                              ModeNumber,
  OUT UINT32*                             HRes,
  OUT UINT32*                             HSync,
  OUT UINT32*                             HBackPorch,
  OUT UINT32*                             HFrontPorch,
  OUT UINT32*                             VRes,
  OUT UINT32*                             VSync,
  OUT UINT32*                             VBackPorch,
  OUT UINT32*                             VFrontPorch
  )
{
  // One of the pointers is NULL
  ASSERT (HRes != NULL);
  ASSERT (HSync != NULL);
  ASSERT (HBackPorch != NULL);
  ASSERT (HFrontPorch != NULL);
  ASSERT (VRes != NULL);
  ASSERT (VSync != NULL);
  ASSERT (VBackPorch != NULL);
  ASSERT (VFrontPorch != NULL);

  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  *HRes           = mResolutions[ModeNumber].HorizontalResolution;
  *HSync          = mResolutions[ModeNumber].HSync;
  *HBackPorch     = mResolutions[ModeNumber].HBackPorch;
  *HFrontPorch    = mResolutions[ModeNumber].HFrontPorch;
  *VRes           = mResolutions[ModeNumber].VerticalResolution;
  *VSync          = mResolutions[ModeNumber].VSync;
  *VBackPorch     = mResolutions[ModeNumber].VBackPorch;
  *VFrontPorch    = mResolutions[ModeNumber].VFrontPorch;

  return EFI_SUCCESS;
}

/** Return bits per pixel information for a mode number.

  @param[in]  ModeNumber          Mode Number.

  @param[out] Bpp                 Pointer to bits per pixel information.

  @retval EFI_SUCCESS             Bits per pixel information for the requested
                                  mode returned successfully.
  @retval EFI_INVALID_PARAMETER   Requested mode not found.
**/
EFI_STATUS
LcdPlatformGetBpp (
  IN  UINT32                              ModeNumber,
  OUT LCD_BPP  *                          Bpp
  )
{
  ASSERT (Bpp != NULL);

  if (ModeNumber >= LcdPlatformGetMaxMode ()) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  *Bpp = mResolutions[ModeNumber].Bpp;

  return EFI_SUCCESS;
}