/** @file ACPI DSDT table Copyright (c) 2017, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License that accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php. THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ Device(FWHD) // Firmware Hub Device { Name(_HID,EISAID("INT0800")) Name(_CRS,ResourceTemplate() { Memory32Fixed(ReadOnly,0xFF000000,0x1000000) }) } Device(HPET) // High Performance Event Timer { Name(_HID,EISAID("PNP0103")) Name(_UID, 0) Name(BUF0,ResourceTemplate() { Memory32Fixed(ReadWrite,0xFED00000,0x400,FED0) }) Method(_STA,0) { // Show this Device only if the OS is WINXP or beyond. If(HPTE) { Return(0x000F) // Enabled, do Display. } Return(0x0000) // Return Nothing. } Method(_CRS,0,Serialized) { If(HPTE) { // Check if HPETimer Base should be modified. CreateDwordField(BUF0,^FED0._BAS,HPT0) Store(HPTB,HPT0) } Return(BUF0) } } Device(IPIC) // 8259 PIC { Name(_HID,EISAID("PNP0000")) Name(_CRS,ResourceTemplate() { IO(Decode16,0x20,0x20,0x01,0x02) IO(Decode16,0x24,0x24,0x01,0x02) IO(Decode16,0x28,0x28,0x01,0x02) IO(Decode16,0x2C,0x2C,0x01,0x02) IO(Decode16,0x30,0x30,0x01,0x02) IO(Decode16,0x34,0x34,0x01,0x02) IO(Decode16,0x38,0x38,0x01,0x02) IO(Decode16,0x3C,0x3C,0x01,0x02) IO(Decode16,0xA0,0xA0,0x01,0x02) IO(Decode16,0xA4,0xA4,0x01,0x02) IO(Decode16,0xA8,0xA8,0x01,0x02) IO(Decode16,0xAC,0xAC,0x01,0x02) IO(Decode16,0xB0,0xB0,0x01,0x02) IO(Decode16,0xB4,0xB4,0x01,0x02) IO(Decode16,0xB8,0xB8,0x01,0x02) IO(Decode16,0xBC,0xBC,0x01,0x02) IO(Decode16,0x4D0,0x4D0,0x01,0x02) IRQNoFlags() {2} }) } Device(MATH) // Math Co-Processor { Name(_HID,EISAID("PNP0C04")) Name(_CRS,ResourceTemplate() { IO(Decode16,0xF0,0xF0,0x01,0x01) IRQNoFlags() {13} }) // // Report device present for LPT-H. // Method (_STA, 0x0, NotSerialized) { If(LEqual(PCHV(), SPTH)) { Return(0x1F) } else { Return(0x0) } } } Device(LDRC) // LPC Device Resource Consumption { Name(_HID,EISAID("PNP0C02")) Name(_UID,2) Name(_CRS,ResourceTemplate() // This is for Cougar Point { IO(Decode16,0x2E,0x2E,0x1,0x02) // SIO Access. IO(Decode16,0x4E,0x4E,0x1,0x02) // LPC Slot Access. IO(Decode16,0x61,0x61,0x1,0x1) // NMI Status. IO(Decode16,0x63,0x63,0x1,0x1) // Processor I/F. IO(Decode16,0x65,0x65,0x1,0x1) // Processor I/F. IO(Decode16,0x67,0x67,0x1,0x1) // Processor I/F. IO(Decode16,0x70,0x70,0x1,0x1) // NMI Enable. IO(Decode16,0x80,0x80,0x1,0x1) // Port 80h. IO(Decode16,0x92,0x92,0x1,0x1) // Processor I/F. IO(Decode16,0xB2,0xB2,0x01,0x02) // Software SMI. IO(Decode16,0x680,0x680,0x1,0x20) // 32 Byte I/O. IO(Decode16,0xFFFF,0xFFFF,0x1,0x1) // ACPI IO Trap. IO(Decode16,0xFFFF,0xFFFF,0x1,0x1) // DTS IO Trap. IO(Decode16,0xFFFF,0xFFFF,0x1,0x1) // HotKey IO Trap. IO(Decode16, 0x1800,0x1800,0x1,0xFF) // PCH ACPI Base IO(Decode16,0x164e,0x164e,0x1,0x02) // 16 Byte I/O. }) } Device(LDR2) // LPC Device Resource Consumption for PCH GPIO { Name(_HID,EISAID("PNP0C02")) Name(_UID, "LPC_DEV") // LPT-H GPIO resource map Name(_CRS,ResourceTemplate() { IO(Decode16, 0x800,0x800,0x1,0x80) // PCH GPIO Base. }) Method(_STA, 0, NotSerialized) { If(LEqual(PCHV(), SPTH)) { Return(0xF) } else { Return(0) } } } Device(RTC) // RTC { Name(_HID,EISAID("PNP0B00")) Name(_CRS,ResourceTemplate() { IO(Decode16,0x70,0x70,0x01,0x08) IRQNoFlags() {8} }) } Device(TIMR) // 8254 Timer { Name(_HID,EISAID("PNP0100")) Name(_CRS,ResourceTemplate() { IO(Decode16,0x40,0x40,0x01,0x04) IO(Decode16,0x50,0x50,0x10,0x04) IRQNoFlags() {0} }) } Device(CWDT) { Name(_HID,EISAID("INT3F0D")) Name(_CID,EISAID("PNP0C02")) Name(BUF0,ResourceTemplate() { IO(Decode16, 0x1854, 0x1854, 0x4, 0x4) // PMBS 0x1800 + Offset 0x54 } ) Method(_STA,0,Serialized) { Return(0x0F) } Method(_CRS,0,Serialized) { Return(BUF0) } }