/** @file
Provides some data structure definitions used by the SD/MMC host controller driver.
Copyright (c) 2015, Intel Corporation. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _SD_MMC_PCI_HC_DXE_H_
#define _SD_MMC_PCI_HC_DXE_H_
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include "SdMmcPciHci.h"
extern EFI_COMPONENT_NAME_PROTOCOL gSdMmcPciHcComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gSdMmcPciHcComponentName2;
extern EFI_DRIVER_BINDING_PROTOCOL gSdMmcPciHcDriverBinding;
#define SD_MMC_HC_PRIVATE_SIGNATURE SIGNATURE_32 ('s', 'd', 't', 'f')
#define SD_MMC_HC_PRIVATE_FROM_THIS(a) \
CR(a, SD_MMC_HC_PRIVATE_DATA, PassThru, SD_MMC_HC_PRIVATE_SIGNATURE)
//
// Generic time out value, 1 microsecond as unit.
//
#define SD_MMC_HC_GENERIC_TIMEOUT 1 * 1000 * 1000
//
// SD/MMC async transfer timer interval, set by experience.
// The unit is 100us, takes 1ms as interval.
//
#define SD_MMC_HC_ASYNC_TIMER EFI_TIMER_PERIOD_MILLISECONDS(1)
//
// SD/MMC removable device enumeration timer interval, set by experience.
// The unit is 100us, takes 100ms as interval.
//
#define SD_MMC_HC_ENUM_TIMER EFI_TIMER_PERIOD_MILLISECONDS(100)
typedef enum {
UnknownCardType,
SdCardType,
SdioCardType,
MmcCardType,
EmmcCardType
} SD_MMC_CARD_TYPE;
typedef enum {
RemovableSlot,
EmbeddedSlot,
SharedBusSlot,
UnknownSlot
} EFI_SD_MMC_SLOT_TYPE;
typedef struct {
BOOLEAN Enable;
EFI_SD_MMC_SLOT_TYPE SlotType;
BOOLEAN MediaPresent;
BOOLEAN Initialized;
SD_MMC_CARD_TYPE CardType;
} SD_MMC_HC_SLOT;
typedef struct {
UINTN Signature;
EFI_HANDLE ControllerHandle;
EFI_PCI_IO_PROTOCOL *PciIo;
EFI_SD_MMC_PASS_THRU_PROTOCOL PassThru;
UINT64 PciAttributes;
//
// The field is used to record the previous slot in GetNextSlot().
//
UINT8 PreviousSlot;
//
// For Non-blocking operation.
//
EFI_EVENT TimerEvent;
//
// For Sd removable device enumeration.
//
EFI_EVENT ConnectEvent;
LIST_ENTRY Queue;
SD_MMC_HC_SLOT Slot[SD_MMC_HC_MAX_SLOT];
SD_MMC_HC_SLOT_CAP Capability[SD_MMC_HC_MAX_SLOT];
UINT64 MaxCurrent[SD_MMC_HC_MAX_SLOT];
UINT32 ControllerVersion;
} SD_MMC_HC_PRIVATE_DATA;
#define SD_MMC_HC_TRB_SIG SIGNATURE_32 ('T', 'R', 'B', 'T')
//
// TRB (Transfer Request Block) contains information for the cmd request.
//
typedef struct {
UINT32 Signature;
LIST_ENTRY TrbList;
UINT8 Slot;
UINT16 BlockSize;
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
VOID *Data;
UINT32 DataLen;
BOOLEAN Read;
EFI_PHYSICAL_ADDRESS DataPhy;
VOID *DataMap;
SD_MMC_HC_TRANSFER_MODE Mode;
EFI_EVENT Event;
BOOLEAN Started;
UINT64 Timeout;
SD_MMC_HC_ADMA_DESC_LINE *AdmaDesc;
EFI_PHYSICAL_ADDRESS AdmaDescPhy;
VOID *AdmaMap;
UINT32 AdmaPages;
SD_MMC_HC_PRIVATE_DATA *Private;
} SD_MMC_HC_TRB;
#define SD_MMC_HC_TRB_FROM_THIS(a) \
CR(a, SD_MMC_HC_TRB, TrbList, SD_MMC_HC_TRB_SIG)
//
// Task for Non-blocking mode.
//
typedef struct {
UINT32 Signature;
LIST_ENTRY Link;
UINT8 Slot;
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
BOOLEAN IsStart;
EFI_EVENT Event;
UINT64 RetryTimes;
BOOLEAN InfiniteWait;
VOID *Map;
VOID *MapAddress;
} SD_MMC_HC_QUEUE;
//
// Prototypes
//
/**
Execute card identification procedure.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Slot The slot number of the SD card to send the command to.
@retval EFI_SUCCESS The card is identified correctly.
@retval Others The card can't be identified.
**/
typedef
EFI_STATUS
(*CARD_TYPE_DETECT_ROUTINE) (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN UINT8 Slot
);
/**
Sends SD command to an SD card that is attached to the SD controller.
The PassThru() function sends the SD command specified by Packet to the SD card
specified by Slot.
If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned.
If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned.
If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER
is returned.
If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL,
EFI_INVALID_PARAMETER is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot The slot number of the SD card to send the command to.
@param[in,out] Packet A pointer to the SD command data structure.
@param[in] Event If Event is NULL, blocking I/O is performed. If Event is
not NULL, then nonblocking I/O is performed, and Event
will be signaled when the Packet completes.
@retval EFI_SUCCESS The SD Command Packet was sent by the host.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SD
command Packet.
@retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid.
@retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and
OutDataBuffer are NULL.
@retval EFI_NO_MEDIA SD Device not present in the Slot.
@retval EFI_UNSUPPORTED The command described by the SD Command Packet is not
supported by the host controller.
@retval EFI_BAD_BUFFER_SIZE The InTransferLength or OutTransferLength exceeds the
limit supported by SD card ( i.e. if the number of bytes
exceed the Last LBA).
**/
EFI_STATUS
EFIAPI
SdMmcPassThruPassThru (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot,
IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
);
/**
Used to retrieve next slot numbers supported by the SD controller. The function
returns information about all available slots (populated or not-populated).
The GetNextSlot() function retrieves the next slot number on an SD controller.
If on input Slot is 0xFF, then the slot number of the first slot on the SD controller
is returned.
If Slot is a slot number that was returned on a previous call to GetNextSlot(), then
the slot number of the next slot on the SD controller is returned.
If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(),
EFI_INVALID_PARAMETER is returned.
If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND
is returned.
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
@param[in,out] Slot On input, a pointer to a slot number on the SD controller.
On output, a pointer to the next slot number on the SD controller.
An input value of 0xFF retrieves the first slot number on the SD
controller.
@retval EFI_SUCCESS The next slot number on the SD controller was returned in Slot.
@retval EFI_NOT_FOUND There are no more slots on this SD controller.
@retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call
to GetNextSlot().
**/
EFI_STATUS
EFIAPI
SdMmcPassThruGetNextSlot (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 *Slot
);
/**
Used to allocate and build a device path node for an SD card on the SD controller.
The BuildDevicePath() function allocates and builds a single device node for the SD
card specified by Slot.
If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND
is returned.
If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES
is returned.
Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is
returned.
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot Specifies the slot number of the SD card for which a device
path node is to be allocated and built.
@param[in,out] DevicePath A pointer to a single device path node that describes the SD
card specified by Slot. This function is responsible for
allocating the buffer DevicePath with the boot service
AllocatePool(). It is the caller's responsibility to free
DevicePath when the caller is finished with DevicePath.
@retval EFI_SUCCESS The device path node that describes the SD card specified by
Slot was allocated and returned in DevicePath.
@retval EFI_NOT_FOUND The SD card specified by Slot does not exist on the SD controller.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
**/
EFI_STATUS
EFIAPI
SdMmcPassThruBuildDevicePath (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
This function retrieves an SD card slot number based on the input device path.
The GetSlotNumber() function retrieves slot number for the SD card specified by
the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned.
If DevicePath is not a device path node type that the SD Pass Thru driver supports,
EFI_UNSUPPORTED is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] DevicePath A pointer to the device path node that describes a SD
card on the SD controller.
@param[out] Slot On return, points to the slot number of an SD card on
the SD controller.
@retval EFI_SUCCESS SD card slot number is returned in Slot.
@retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL.
@retval EFI_UNSUPPORTED DevicePath is not a device path node type that the SD
Pass Thru driver supports.
**/
EFI_STATUS
EFIAPI
SdMmcPassThruGetSlotNumber (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT8 *Slot
);
/**
Resets an SD card that is connected to the SD controller.
The ResetDevice() function resets the SD card specified by Slot.
If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is
returned.
If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER
is returned.
If the device reset operation is completed, EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot Specifies the slot number of the SD card to be reset.
@retval EFI_SUCCESS The SD card specified by Slot was reset.
@retval EFI_UNSUPPORTED The SD controller does not support a device reset operation.
@retval EFI_INVALID_PARAMETER Slot number is invalid.
@retval EFI_NO_MEDIA SD Device not present in the Slot.
@retval EFI_DEVICE_ERROR The reset command failed due to a device error
**/
EFI_STATUS
EFIAPI
SdMmcPassThruResetDevice (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot
);
//
// Driver model protocol interfaces
//
/**
Tests to see if this driver supports a given controller. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
This function checks to see if the driver specified by This supports the device specified by
ControllerHandle. Drivers will typically use the device path attached to
ControllerHandle and/or the services from the bus I/O abstraction attached to
ControllerHandle to determine if the driver supports ControllerHandle. This function
may be called many times during platform initialization. In order to reduce boot times, the tests
performed by this function must be very small, and take as little time as possible to execute. This
function must not change the state of any hardware devices, and this function must be aware that the
device specified by ControllerHandle may already be managed by the same driver or a
different driver. This function must match its calls to AllocatePages() with FreePages(),
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
Since ControllerHandle may have been previously started by the same driver, if a protocol is
already in the opened state, then it must not be closed with CloseProtocol(). This is required
to guarantee the state of ControllerHandle is not modified by this function.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to test. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For bus drivers, if this parameter is not NULL, then
the bus driver must determine if the bus controller specified
by ControllerHandle and the child controller specified
by RemainingDevicePath are both supported by this
bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
RemainingDevicePath is supported by the driver specified by This.
@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by the driver
specified by This.
@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by a different
driver or an application that requires exclusive access.
Currently not implemented.
@retval EFI_UNSUPPORTED The device specified by ControllerHandle and
RemainingDevicePath is not supported by the driver specified by This.
**/
EFI_STATUS
EFIAPI
SdMmcPciHcDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Starts a device controller or a bus controller.
The Start() function is designed to be invoked from the EFI boot service ConnectController().
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For a bus driver, if this parameter is NULL, then handles
for all the children of Controller are created by this driver.
If this parameter is not NULL and the first Device Path Node is
not the End of Device Path Node, then only the handle for the
child device specified by the first Device Path Node of
RemainingDevicePath is created by this driver.
If the first Device Path Node of RemainingDevicePath is
the End of Device Path Node, no child handle is created by this
driver.
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
SdMmcPciHcDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Stops a device controller or a bus controller.
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
Start() function, and the Start() function must have called OpenProtocol() on
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
SdMmcPciHcDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
//
// EFI Component Name Functions
//
/**
Retrieves a Unicode string that is the user readable name of the driver.
This function retrieves the user readable name of a driver in the form of a
Unicode string. If the driver specified by This has a user readable name in
the language specified by Language, then a pointer to the driver name is
returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified
in RFC 4646 or ISO 639-2 language code format.
@param DriverName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
@retval EFI_SUCCESS The Unicode string for the Driver specified by
This and the language specified by Language was
returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER DriverName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
SdMmcPciHcComponentNameGetDriverName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN CHAR8 *Language,
OUT CHAR16 **DriverName
);
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
This function retrieves the user readable name of the controller specified by
ControllerHandle and ChildHandle in the form of a Unicode string. If the
driver specified by This has a user readable name in the language specified by
Language, then a pointer to the controller name is returned in ControllerName,
and EFI_SUCCESS is returned. If the driver specified by This is not currently
managing the controller specified by ControllerHandle and ChildHandle,
then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param ControllerHandle[in] The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to be
returned.
@param ChildHandle[in] The handle of the child controller to retrieve
the name of. This is an optional parameter that
may be NULL. It will be NULL for device
drivers. It will also be NULL for a bus drivers
that wish to retrieve the name of the bus
controller. It will not be NULL for a bus
driver that wishes to retrieve the name of a
child controller.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified in
RFC 4646 or ISO 639-2 language code format.
@param ControllerName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle and
ChildHandle in the language specified by
Language from the point of view of the driver
specified by This.
@retval EFI_SUCCESS The Unicode string for the user readable name in
the language specified by Language for the
driver specified by This was returned in
DriverName.
@retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
EFI_HANDLE.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This is not currently
managing the controller specified by
ControllerHandle and ChildHandle.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
SdMmcPciHcComponentNameGetControllerName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_HANDLE ChildHandle, OPTIONAL
IN CHAR8 *Language,
OUT CHAR16 **ControllerName
);
/**
Create a new TRB for the SD/MMC cmd request.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Slot The slot number of the SD card to send the command to.
@param[in] Packet A pointer to the SD command data structure.
@param[in] Event If Event is NULL, blocking I/O is performed. If Event is
not NULL, then nonblocking I/O is performed, and Event
will be signaled when the Packet completes.
@return Created Trb or NULL.
**/
SD_MMC_HC_TRB *
SdMmcCreateTrb (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN UINT8 Slot,
IN EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
IN EFI_EVENT Event
);
/**
Free the resource used by the TRB.
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
**/
VOID
SdMmcFreeTrb (
IN SD_MMC_HC_TRB *Trb
);
/**
Check if the env is ready for execute specified TRB.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
@retval EFI_SUCCESS The env is ready for TRB execution.
@retval EFI_NOT_READY The env is not ready for TRB execution.
@retval Others Some erros happen.
**/
EFI_STATUS
SdMmcCheckTrbEnv (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN SD_MMC_HC_TRB *Trb
);
/**
Wait for the env to be ready for execute specified TRB.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
@retval EFI_SUCCESS The env is ready for TRB execution.
@retval EFI_TIMEOUT The env is not ready for TRB execution in time.
@retval Others Some erros happen.
**/
EFI_STATUS
SdMmcWaitTrbEnv (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN SD_MMC_HC_TRB *Trb
);
/**
Execute the specified TRB.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
@retval EFI_SUCCESS The TRB is sent to host controller successfully.
@retval Others Some erros happen when sending this request to the host controller.
**/
EFI_STATUS
SdMmcExecTrb (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN SD_MMC_HC_TRB *Trb
);
/**
Check the TRB execution result.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
@retval EFI_SUCCESS The TRB is executed successfully.
@retval EFI_NOT_READY The TRB is not completed for execution.
@retval Others Some erros happen when executing this request.
**/
EFI_STATUS
SdMmcCheckTrbResult (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN SD_MMC_HC_TRB *Trb
);
/**
Wait for the TRB execution result.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Trb The pointer to the SD_MMC_HC_TRB instance.
@retval EFI_SUCCESS The TRB is executed successfully.
@retval Others Some erros happen when executing this request.
**/
EFI_STATUS
SdMmcWaitTrbResult (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN SD_MMC_HC_TRB *Trb
);
/**
Execute EMMC device identification procedure.
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Slot The slot number of the SD card to send the command to.
@retval EFI_SUCCESS There is a EMMC card.
@retval Others There is not a EMMC card.
**/
EFI_STATUS
EmmcIdentification (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN UINT8 Slot
);
/**
Execute EMMC device identification procedure.
Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
@param[in] Private A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
@param[in] Slot The slot number of the SD card to send the command to.
@retval EFI_SUCCESS There is a EMMC card.
@retval Others There is not a EMMC card.
**/
EFI_STATUS
SdCardIdentification (
IN SD_MMC_HC_PRIVATE_DATA *Private,
IN UINT8 Slot
);
#endif