/** @file

Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _PCH_SBI_ACCESS_LIB_H_
#define _PCH_SBI_ACCESS_LIB_H_

/**
  PCH SBI Register structure
**/
typedef struct {
  UINT32            SbiAddr;
  UINT32            SbiExtAddr;
  UINT32            SbiData;
  UINT16            SbiStat;
  UINT16            SbiRid;
} PCH_SBI_REGISTER_STRUCT;

/**
  PCH SBI opcode definitions
**/
typedef enum {
  MemoryRead             = 0x0,
  MemoryWrite            = 0x1,
  PciConfigRead          = 0x4,
  PciConfigWrite         = 0x5,
  PrivateControlRead     = 0x6,
  PrivateControlWrite    = 0x7,
  GpioLockUnlock         = 0x13
} PCH_SBI_OPCODE;

/**
  PCH SBI response status definitions
**/
typedef enum {
  SBI_SUCCESSFUL          = 0,
  SBI_UNSUCCESSFUL        = 1,
  SBI_POWERDOWN           = 2,
  SBI_MIXED               = 3,
  SBI_INVALID_RESPONSE
} PCH_SBI_RESPONSE;

/**
  Execute PCH SBI message
  Take care of that there is no lock protection when using SBI programming in both POST time and SMI.
  It will clash with POST time SBI programming when SMI happen.
  Programmer MUST do the save and restore opration while using the PchSbiExecution inside SMI
  to prevent from racing condition.
  This function will reveal P2SB and hide P2SB if it's originally hidden. If more than one SBI access
  needed, it's better to unhide the P2SB before calling and hide it back after done.

  When the return value is "EFI_SUCCESS", the "Response" do not need to be checked as it would have been
  SBI_SUCCESS. If the return value is "EFI_DEVICE_ERROR", then this would provide additional information
  when needed.

  @param[in] Pid                        Port ID of the SBI message
  @param[in] Offset                     Offset of the SBI message
  @param[in] Opcode                     Opcode
  @param[in] Posted                     Posted message
  @param[in, out] Data32                Read/Write data
  @param[out] Response                  Response

  @retval EFI_SUCCESS                   Successfully completed.
  @retval EFI_DEVICE_ERROR              Transaction fail
  @retval EFI_INVALID_PARAMETER         Invalid parameter
**/
EFI_STATUS
EFIAPI
PchSbiExecution (
  IN     PCH_SBI_PID                    Pid,
  IN     UINT64                         Offset,
  IN     PCH_SBI_OPCODE                 Opcode,
  IN     BOOLEAN                        Posted,
  IN OUT UINT32                         *Data32,
  OUT    UINT8                          *Response
  );

/**
  Full function for executing PCH SBI message
  Take care of that there is no lock protection when using SBI programming in both POST time and SMI.
  It will clash with POST time SBI programming when SMI happen.
  Programmer MUST do the save and restore opration while using the PchSbiExecution inside SMI
  to prevent from racing condition.
  This function will reveal P2SB and hide P2SB if it's originally hidden. If more than one SBI access
  needed, it's better to unhide the P2SB before calling and hide it back after done.

  When the return value is "EFI_SUCCESS", the "Response" do not need to be checked as it would have been
  SBI_SUCCESS. If the return value is "EFI_DEVICE_ERROR", then this would provide additional information
  when needed.

  @param[in] Pid                        Port ID of the SBI message
  @param[in] Offset                     Offset of the SBI message
  @param[in] Opcode                     Opcode
  @param[in] Posted                     Posted message
  @param[in] Fbe                        First byte enable
  @param[in] Bar                        Bar
  @param[in] Fid                        Function ID
  @param[in, out] Data32                Read/Write data
  @param[out] Response                  Response

  @retval EFI_SUCCESS                   Successfully completed.
  @retval EFI_DEVICE_ERROR              Transaction fail
  @retval EFI_INVALID_PARAMETER         Invalid parameter
**/
EFI_STATUS
EFIAPI
PchSbiExecutionEx (
  IN     PCH_SBI_PID                    Pid,
  IN     UINT64                         Offset,
  IN     PCH_SBI_OPCODE                 Opcode,
  IN     BOOLEAN                        Posted,
  IN     UINT16                         Fbe,
  IN     UINT16                         Bar,
  IN     UINT16                         Fid,
  IN OUT UINT32                         *Data32,
  OUT    UINT8                          *Response
  );

/**
  This function saves all PCH SBI registers.
  The save and restore operations must be done while using the PchSbiExecution inside SMM.
  It prevents the racing condition of PchSbiExecution re-entry between POST and SMI.
  Before using this function, make sure the P2SB is not hidden.

  @param[in, out] PchSbiRegister        Structure for saving the registers

  @retval EFI_SUCCESS                   Successfully completed.
  @retval EFI_DEVICE_ERROR              Device is hidden.
**/
EFI_STATUS
EFIAPI
PchSbiRegisterSave (
  IN OUT PCH_SBI_REGISTER_STRUCT        *PchSbiRegister
  );

/**
  This function restores all PCH SBI registers
  The save and restore operations must be done while using the PchSbiExecution inside SMM.
  It prevents the racing condition of PchSbiExecution re-entry between POST and SMI.
  Before using this function, make sure the P2SB is not hidden.

  @param[in] PchSbiRegister             Structure for restoring the registers

  @retval EFI_SUCCESS                   Successfully completed.
  @retval EFI_DEVICE_ERROR              Device is hidden.
**/
EFI_STATUS
EFIAPI
PchSbiRegisterRestore (
  IN PCH_SBI_REGISTER_STRUCT            *PchSbiRegister
  );

#endif // _PCH_SBI_ACCESS_LIB_H_