/** @file
 * Copyright (c) 2017 - 2018, Linaro Limited. All rights reserved.
 *
 * This program and the accompanying materials are licensed and made
 * available under the terms and conditions of the BSD License which
 * accompanies this distribution.  The full text of the license may be
 * found at http://opensource.org/licenses/bsd-license.php
 *
 * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
 * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
 * IMPLIED.
 */

#define GIC_SPI                 0
#define GIC_PPI                 1

#define IRQ_TYPE_NONE           0
#define IRQ_TYPE_EDGE_RISING    1
#define IRQ_TYPE_EDGE_FALLING   2
#define IRQ_TYPE_EDGE_BOTH      (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
#define IRQ_TYPE_LEVEL_HIGH     4
#define IRQ_TYPE_LEVEL_LOW      8

#define GPIO_ACTIVE_HIGH        0
#define GPIO_ACTIVE_LOW         1

/ {
    #address-cells = <2>;
    #size-cells = <2>;
    interrupt-parent = <&gic>;
    dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;

    aliases {
        serial0 = &soc_uart0;
        serial1 = &fuart;
    };

    chosen {
        stdout-path = "serial0:115200n8";
    };

    cpus {
        #address-cells = <1>;
        #size-cells = <0>;

        CPU0: cpu@0 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x0>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU1: cpu@1 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x1>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU2: cpu@100 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x100>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU3: cpu@101 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x101>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU4: cpu@200 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x200>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU5: cpu@201 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x201>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU6: cpu@300 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x300>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU7: cpu@301 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x301>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU8: cpu@400 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x400>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU9: cpu@401 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x401>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU10: cpu@500 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x500>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU11: cpu@501 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x501>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU12: cpu@600 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x600>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU13: cpu@601 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x601>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU14: cpu@700 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x700>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU15: cpu@701 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x701>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU16: cpu@800 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x800>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU17: cpu@801 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x801>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU18: cpu@900 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x900>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU19: cpu@901 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0x901>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU20: cpu@a00 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0xa00>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU21: cpu@a01 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0xa01>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU22: cpu@b00 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0xb00>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };
        CPU23: cpu@b01 {
            device_type = "cpu";
            compatible = "arm,cortex-a53","arm,armv8";
            reg = <0xb01>;
            enable-method = "psci";
            cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
        };

        cpu-map {
            cluster0 {
                core0 {
                    cpu = <&CPU0>;
                };
                core1 {
                    cpu = <&CPU1>;
                };
            };
             cluster1 {
                core0 {
                    cpu = <&CPU2>;
                };
                core1 {
                    cpu = <&CPU3>;
                };
            };
            cluster2 {
                core0 {
                    cpu = <&CPU4>;
                };
                core1 {
                    cpu = <&CPU5>;
                };
            };
            cluster3 {
                core0 {
                    cpu = <&CPU6>;
                };
                core1 {
                    cpu = <&CPU7>;
                };
            };
            cluster4 {
                core0 {
                    cpu = <&CPU8>;
                };
                core1 {
                    cpu = <&CPU9>;
                };
            };
            cluster5 {
                core0 {
                    cpu = <&CPU10>;
                };
                core1 {
                    cpu = <&CPU11>;
                };
            };
            cluster6 {
                core0 {
                    cpu = <&CPU12>;
                };
                core1 {
                    cpu = <&CPU13>;
                };
            };
            cluster7 {
                core0 {
                    cpu = <&CPU14>;
                };
                core1 {
                    cpu = <&CPU15>;
                };
            };
            cluster8 {
                core0 {
                    cpu = <&CPU16>;
                };
                core1 {
                    cpu = <&CPU17>;
                };
            };
            cluster9 {
                core0 {
                    cpu = <&CPU18>;
                };
                core1 {
                    cpu = <&CPU19>;
                };
            };
            cluster10 {
                core0 {
                    cpu = <&CPU20>;
                };
                core1 {
                    cpu = <&CPU21>;
                };
            };
            cluster11 {
                core0 {
                    cpu = <&CPU22>;
                };
                core1 {
                    cpu = <&CPU23>;
                };
            };
        };
    };

    idle-states {
        entry-method = "arm,psci";

        CPU_SLEEP_0: cpu-sleep-0 {
            compatible = "arm,idle-state";
            arm,psci-suspend-param = <0x0010000>;
            entry-latency-us = <300>;
            exit-latency-us = <1200>;
            min-residency-us = <2000>;
            local-timer-stop;
        };

        CLUSTER_SLEEP_0: cluster-sleep-0 {
            compatible = "arm,idle-state";
            arm,psci-suspend-param = <0x1010000>;
            entry-latency-us = <400>;
            exit-latency-us = <1200>;
            min-residency-us = <2500>;
            local-timer-stop;
        };
    };

    gic: interrupt-controller@30000000 {
        compatible = "arm,gic-v3";
        reg = <0x0 0x30000000 0x0 0x10000>,      // GICD
              <0x0 0x30400000 0x0 0x300000>,     // GICR
              <0x0 0x2c000000 0x0 0x2000>,       // GICC
              <0x0 0x2c010000 0x0 0x1000>,       // GICH
              <0x0 0x2c020000 0x0 0x2000>;       // GICV
        #interrupt-cells = <3>;
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;
        interrupt-controller;
        interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;

        its: gic-its@30020000 {
            compatible = "arm,gic-v3-its";
            reg = <0x0 0x30020000 0x0 0x20000>;
            #msi-cells = <1>;
            msi-controller;
            socionext,synquacer-pre-its = <0x58000000 0x200000>;
        };
    };

    timer {
        compatible = "arm,armv8-timer";
        interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,   // secure
                     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,   // non-secure
                     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,   // virtual
                     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;   // HYP
    };

    mmio-timer@2a810000 {
        compatible = "arm,armv7-timer-mem";
        reg = <0x0 0x2a810000 0x0 0x10000>;
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;
        frame@2a830000 {
            frame-number = <0>;
            interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
            reg = <0x0 0x2a830000 0x0 0x10000>;
        };
    };

    pmu {
        compatible = "arm,cortex-a53-pmu";
        interrupts =  <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
    };

    psci {
        compatible = "arm,psci-1.0";
        method = "smc";
    };

    clk_uart: refclk62500khz {
        compatible = "fixed-clock";
        #clock-cells = <0>;
        clock-frequency = <62500000>;
        clock-output-names = "uartclk";
    };

    clk_apb: refclk100mhz {
        compatible = "fixed-clock";
        #clock-cells = <0>;
        clock-frequency = <100000000>;
        clock-output-names = "apb_pclk";
    };

    soc_uart0: uart@2a400000 {
        compatible = "arm,pl011", "arm,primecell";
        reg = <0x0 0x2a400000 0x0 0x1000>;
        interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clk_uart>, <&clk_apb>;
        clock-names = "uartclk", "apb_pclk";
    };

    fuart: uart@51040000 {
        compatible = "snps,dw-apb-uart";
        reg = <0x0 0x51040000 0x0 0x1000>;
        interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clk_uart>, <&clk_apb>;
        clock-names = "baudclk", "apb_pclk";
        reg-io-width = <4>;
        reg-shift = <2>;
    };

    clk_netsec: refclk250mhz {
        compatible = "fixed-clock";
        clock-frequency = <250000000>;
        #clock-cells = <0>;
    };

    ethernet@522d0000 {
        compatible = "socionext,synquacer-netsec";
        reg = <0 0x522d0000 0x0 0x10000>,
              <0 FixedPcdGet32 (PcdNetsecEepromBase) 0x0 0x10000>;
        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clk_netsec>;
        clock-names = "phy_ref_clk";
        phy-mode = "rgmii";
        max-speed = <1000>;
        max-frame-size = <9000>;
        phy-handle = <&phy_netsec>;
        dma-coherent;

        mdio_netsec: mdio {
            #address-cells = <1>;
            #size-cells = <0>;
        };
    };

    smmu: iommu@582c0000 {
        compatible = "arm,mmu-500", "arm,smmu-v2";
        reg = <0x0 0x582c0000 0x0 0x10000>;
        #global-interrupts = <1>;
        interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
        #iommu-cells = <1>;
        status = "disabled";
    };

    pcie0: pcie@60000000 {
        compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
        device_type = "pci";
        reg = <0x0 0x60000000 0x0 0x7f00000>;
        bus-range = <0x0 0x7e>;
        #address-cells = <3>;
        #size-cells = <2>;
        ranges = <0x1000000 0x00 0x00000000 0x00 0x67f00000 0x0 0x00010000>,
                 <0x2000000 0x00 0x68000000 0x00 0x68000000 0x0 0x08000000>,
                 <0x3000000 0x3e 0x00000000 0x3e 0x00000000 0x1 0x00000000>;

        #interrupt-cells = <0x1>;
        interrupt-map-mask = <0x0 0x0 0x0 0x0>;
        interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;

        msi-map = <0x000 &its 0x0 0x7f00>;
        dma-coherent;
    };

    pcie1: pcie@70000000 {
        compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
        device_type = "pci";
        reg = <0x0 0x70000000 0x0 0x7f00000>;
        bus-range = <0x0 0x7e>;
        #address-cells = <3>;
        #size-cells = <2>;
        ranges = <0x1000000 0x00 0x00000000 0x00 0x77f00000 0x0 0x00010000>,
                 <0x2000000 0x00 0x78000000 0x00 0x78000000 0x0 0x08000000>,
                 <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>;

        #interrupt-cells = <0x1>;
        interrupt-map-mask = <0x0 0x0 0x0 0x0>;
        interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;

        msi-map = <0x0 &its 0x10000 0x7f00>;
        dma-coherent;
    };

    gpio: gpio@51000000 {
        compatible = "socionext,synquacer-gpio", "fujitsu,mb86s70-gpio";
        reg = <0x0 0x51000000 0x0 0x100>;
        gpio-controller;
        #gpio-cells = <2>;
        clocks = <&clk_apb>;
        base = <0>;
    };

    exiu: interrupt-controller@510c0000 {
        compatible = "socionext,synquacer-exiu";
        reg = <0x0 0x510c0000 0x0 0x20>;
        interrupt-controller;
        interrupt-parent = <&gic>;
        #interrupt-cells = <3>;
        socionext,spi-base = <112>;
    };

    clk_alw_b_0: bclk200 {
        compatible = "fixed-clock";
        #clock-cells = <0>;
        clock-frequency = <200000000>;
        clock-output-names = "sd_bclk";
    };

    clk_alw_c_0: sd4clk800 {
        compatible = "fixed-clock";
        #clock-cells = <0>;
        clock-frequency = <800000000>;
        clock-output-names = "sd_sd4clk";
    };

    sdhci: sdhci@52300000 {
        compatible = "socionext,synquacer-sdhci", "fujitsu,mb86s70-sdhci-3.0";
        reg = <0 0x52300000 0x0 0x1000>;
        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
        bus-width = <8>;
        cap-mmc-highspeed;
        fujitsu,cmd-dat-delay-select;
        clocks = <&clk_alw_c_0 &clk_alw_b_0>;
        clock-names = "core", "iface";
        dma-coherent;
    };

    clk_alw_1_8: spi_ihclk {
        compatible = "fixed-clock";
        #clock-cells = <0>;
        clock-frequency = <125000000>;
        clock-output-names = "iHCLK";
    };

    spi: spi@54810000 {
        compatible = "socionext,synquacer-spi";
        reg = <0x0 0x54810000 0x0 0x1000>;
        clocks = <&clk_alw_1_8>;
        clock-names = "iHCLK";
        socionext,use-rtm;
        socionext,set-aces;
        #address-cells = <1>;
        #size-cells = <0>;
    };

    clk_i2c: i2c_pclk {
        compatible = "fixed-clock";
        #clock-cells = <0>;
        clock-frequency = <62500000>;
        clock-output-names = "pclk";
    };

    i2c: i2c@51210000 {
        compatible = "socionext,synquacer-i2c";
        reg = <0x0 0x51210000 0x0 0x1000>;
        interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clk_i2c>;
        clock-names = "pclk";
        clock-frequency = <400000>;
        #address-cells = <1>;
        #size-cells = <0>;
    };
};

#include "SynQuacerCaches.dtsi"