#/** @file
# FDF file of Platform.
#
# Copyright (c) 2008 - 2015, Intel Corporation. All rights reserved.
#
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
#**/
[Defines]
DEFINE FLASH_BASE = 0xFFD00000 #The base address of the 3Mb FLASH Device.
DEFINE FLASH_SIZE = 0x00300000 #The flash size in bytes of the 3Mb FLASH Device.
DEFINE FLASH_BLOCK_SIZE = 0x1000 #The block size in bytes of the 3Mb FLASH Device.
DEFINE FLASH_NUM_BLOCKS = 0x300 #The number of blocks in 3Mb FLASH Device.
DEFINE FLASH_AREA_BASE_ADDRESS = 0xFF800000
DEFINE FLASH_AREA_SIZE = 0x00800000
DEFINE FLASH_REGION_VLVMICROCODE_OFFSET = 0x00000000
DEFINE FLASH_REGION_VLVMICROCODE_SIZE = 0x00030000
DEFINE FLASH_REGION_VLVMICROCODE_BASE = 0xFFD00000
DEFINE FLASH_REGION_VPD_OFFSET = 0x00030000
DEFINE FLASH_REGION_VPD_SIZE = 0x0003E000
DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_OFFSET = 0x0006E000
DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_SIZE = 0x00002000
DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_OFFSET = 0x00070000
DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_SIZE = 0x00040000
!if $(MINNOW2_FSP_BUILD) == TRUE
DEFINE FLASH_REGION_FSPBIN_OFFSET = 0x000B0000
DEFINE FLASH_REGION_FSPBIN_SIZE = 0x00048000
DEFINE FLASH_REGION_FSPBIN_BASE = 0xFFDB0000
DEFINE FLASH_REGION_AZALIABIN_OFFSET = 0x000F8000
DEFINE FLASH_REGION_AZALIABIN_SIZE = 0x00008000
DEFINE FLASH_REGION_AZALIABIN_BASE = 0xFFDF8000
!endif
DEFINE FLASH_REGION_FVMAIN_OFFSET = 0x00100000
DEFINE FLASH_REGION_FVMAIN_SIZE = 0x00196000
DEFINE FLASH_REGION_FV_RECOVERY2_OFFSET = 0x00296000
DEFINE FLASH_REGION_FV_RECOVERY2_SIZE = 0x0002C000
DEFINE FLASH_REGION_FV_RECOVERY_OFFSET = 0x002C2000
DEFINE FLASH_REGION_FV_RECOVERY_SIZE = 0x0003E000
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Vlv]
BaseAddress = $(FLASH_BASE)|gPlatformModuleTokenSpaceGuid.PcdFlashAreaBaseAddress #The base address of the 3Mb FLASH Device.
Size = $(FLASH_SIZE)|gPlatformModuleTokenSpaceGuid.PcdFlashAreaSize #The flash size in bytes of the 3Mb FLASH Device.
ErasePolarity = 1
BlockSize = $(FLASH_BLOCK_SIZE) #The block size in bytes of the 3Mb FLASH Device.
NumBlocks = $(FLASH_NUM_BLOCKS) #The number of blocks in 3Mb FLASH Device.
#
#Flash location override based on actual flash map
#
SET gPlatformModuleTokenSpaceGuid.PcdFlashAreaBaseAddress = $(FLASH_AREA_BASE_ADDRESS)
SET gPlatformModuleTokenSpaceGuid.PcdFlashAreaSize = $(FLASH_AREA_SIZE)
!if $(MINNOW2_FSP_BUILD) == TRUE
# put below PCD value setting into dsc file
#SET gFspWrapperTokenSpaceGuid.PcdCpuMicrocodePatchAddress = $(FLASH_REGION_VLVMICROCODE_BASE)
#SET gFspWrapperTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize = $(FLASH_REGION_VLVMICROCODE_SIZE)
#SET gFspWrapperTokenSpaceGuid.PcdFlashMicroCodeOffset = 0x60
#SET gFspWrapperTokenSpaceGuid.PcdFlashCodeCacheAddress = $(FLASH_AREA_BASE_ADDRESS)
#SET gFspWrapperTokenSpaceGuid.PcdFlashCodeCacheSize = $(FLASH_AREA_SIZE)
#SET gFspWrapperTokenSpaceGuid.PcdFlashFvFspBase = $(FLASH_REGION_FSPBIN_BASE)
#SET gFspWrapperTokenSpaceGuid.PcdFlashFvFspSize = $(FLASH_REGION_FSPBIN_SIZE)
!endif
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType
# Fv Size can be adjusted; FVMAIN_COMPACT can be reduced to 0x120000, and FV_RECOVERY can be enlarged to 0x80000
#
################################################################################
# Since the Fce tool don't have gcc version, we can't handle default variable in Linux,
# so we hardcode the default value of variable here.
# Please note that we MUST update the binary once the default value is changed.
#
# CPU Microcodes
#
$(FLASH_REGION_VLVMICROCODE_OFFSET)|$(FLASH_REGION_VLVMICROCODE_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashMicroCodeAddress|gPlatformModuleTokenSpaceGuid.PcdFlashMicroCodeSize
FV = MICROCODE_FV
$(FLASH_REGION_VPD_OFFSET)|$(FLASH_REGION_VPD_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
FILE = $(WORKSPACE)/Vlv2TbltDevicePkg/Stitch/Gcc/NvStorageVariable.bin
$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_OFFSET)|$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
FILE = $(WORKSPACE)/Vlv2TbltDevicePkg/Stitch/Gcc/NvStorageFtwWorking.bin
$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_OFFSET)|$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
FILE = $(WORKSPACE)/Vlv2TbltDevicePkg/Stitch/Gcc/NvStorageFtwSpare.bin
!if $(MINNOW2_FSP_BUILD) == TRUE
$(FLASH_REGION_FSPBIN_OFFSET)|$(FLASH_REGION_FSPBIN_SIZE)
gFspWrapperTokenSpaceGuid.PcdFlashFvFspBase|gFspWrapperTokenSpaceGuid.PcdFlashFvFspSize
FILE = Vlv2MiscBinariesPkg/FspBinary/FvFsp.bin
$(FLASH_REGION_AZALIABIN_OFFSET)|$(FLASH_REGION_AZALIABIN_SIZE)
FILE = Vlv2TbltDevicePkg/FspAzaliaConfigData/AzaliaConfig.bin
!endif
#
# Main Block
#
$(FLASH_REGION_FVMAIN_OFFSET)|$(FLASH_REGION_FVMAIN_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashFvMainBase|gPlatformModuleTokenSpaceGuid.PcdFlashFvMainSize
FV = FVMAIN_COMPACT
#
# FV Recovery#2
#
$(FLASH_REGION_FV_RECOVERY2_OFFSET)|$(FLASH_REGION_FV_RECOVERY2_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashFvRecovery2Base|gPlatformModuleTokenSpaceGuid.PcdFlashFvRecovery2Size
FV = FVRECOVERY2
#
# FV Recovery
#
$(FLASH_REGION_FV_RECOVERY_OFFSET)|$(FLASH_REGION_FV_RECOVERY_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashFvRecoveryBase|gPlatformModuleTokenSpaceGuid.PcdFlashFvRecoverySize
FV = FVRECOVERY
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.MICROCODE_FV]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = FALSE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FILE RAW = 197DB236-F856-4924-90F8-CDF12FB875F3 {
$(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/$(DXE_ARCHITECTURE)/MicrocodeUpdates.bin
}
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVRECOVERY2]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = B73FE497-B92E-416e-8326-45AD0D270092
INF $(PLATFORM_PACKAGE)/PlatformInitPei/PlatformInitPei.inf
!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchSmbusArpDisabled.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/VlvInitPeim.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchInitPeim.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchSpiPeim.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PeiSmmAccess.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PeiSmmControl.inf
INF UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/MpS3.inf
INF EdkCompatibilityPkg/Compatibility/AcpiVariableHobOnSmramReserveHobThunk/AcpiVariableHobOnSmramReserveHobThunk.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PiSmmCommunicationPei.inf
!if $(TPM_ENABLED) == TRUE
INF SecurityPkg/Tcg/TrEEConfig/TrEEConfigPei.inf
INF SecurityPkg/Tcg/TcgPei/TcgPei.inf
INF SecurityPkg/Tcg/PhysicalPresencePei/PhysicalPresencePei.inf
!endif
!if $(FTPM_ENABLE) == TRUE
INF SecurityPkg/Tcg/TrEEPei/TrEEPei.inf #use PCD config
!endif
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!if $(ACPI50_ENABLE) == TRUE
INF MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTablePei/FirmwarePerformancePei.inf
!endif
!if $(PERFORMANCE_ENABLE) == TRUE
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
!endif
[FV.FVRECOVERY]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = B73FE497-B92E-416e-8326-45AD0D270091
!if $(MINNOW2_FSP_BUILD) == TRUE
INF IntelFspWrapperPkg/FspWrapperSecCore/FspWrapperSecCore.inf
!else
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/SecCore.inf
!endif
INF MdeModulePkg/Core/Pei/PeiMain.inf
!if $(MINNOW2_FSP_BUILD) == TRUE
INF Vlv2TbltDevicePkg/FspSupport/BootModePei/BootModePei.inf
INF IntelFspWrapperPkg/FspInitPei/FspInitPei.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/CpuPeim.inf
INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF $(PLATFORM_PACKAGE)/PlatformPei/PlatformPei.inf
!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/SeCUma.inf
!endif
!if $(FTPM_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/fTPMInitPeim.inf
!endif
!if $(SOURCE_DEBUG_ENABLE) == TRUE
INF SourceLevelDebugPkg/DebugAgentPei/DebugAgentPei.inf
!endif
!if $(CAPSULE_ENABLE) == TRUE
INF MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
!if $(DXE_ARCHITECTURE) == "X64"
INF MdeModulePkg/Universal/CapsulePei/CapsuleX64.inf
!endif
!endif
!if $(MINNOW2_FSP_BUILD) == FALSE
!if $(PCIESC_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchEarlyInitPeim.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/MemoryInit.inf
!endif
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
[FV.FVMAIN]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = A881D567-6CB0-4eee-8435-2E72D33E45B5
APRIORI DXE {
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
}
FILE FREEFORM = C3E36D09-8294-4b97-A857-D5288FE33E28 {
SECTION RAW = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/$(DXE_ARCHITECTURE)/BiosId.bin
}
#
# EDK II Related Platform codes
#
!if $(MINNOW2_FSP_BUILD) == TRUE
INF IntelFspWrapperPkg/FspNotifyDxe/FspNotifyDxe.inf
!endif
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
!if $(ACPI50_ENABLE) == TRUE
INF MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTableDxe/FirmwarePerformanceDxe.inf
INF MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTableSmm/FirmwarePerformanceSmm.inf
!endif
INF IntelFrameworkModulePkg/Universal/CpuIoDxe/CpuIoDxe.inf
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Smm/ReportStatusCodeRouterSmm.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/MpCpu.inf
INF $(PLATFORM_PACKAGE)/Metronome/Metronome.inf
INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmmRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
INF $(PLATFORM_PACKAGE)/FvbRuntimeDxe/FvbSmm.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSpiSmm.inf
!if $(SECURE_BOOT_ENABLE)
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!endif
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF $(PLATFORM_PACKAGE)/FvbRuntimeDxe/FvbRuntimeDxe.inf
INF $(PLATFORM_PACKAGE)/PlatformSetupDxe/PlatformSetupDxe.inf
!if $(DATAHUB_ENABLE) == TRUE
INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
!endif
INF IntelFrameworkModulePkg/Universal/StatusCode/DatahubStatusCodeHandlerDxe/DatahubStatusCodeHandlerDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/Dptf.inf
#
# EDK II Related Silicon codes
#
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchS3SupportDxe.inf
!if $(USE_HPET_TIMER) == TRUE
INF PcAtChipsetPkg/HpetTimerDxe/HpetTimerDxe.inf
!else
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmartTimer.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmmControl.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSmbusDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/IntelPchLegacyInterrupt.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchReset.inf
!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchInitDxe.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSmiDispatcher.inf
!if $(PCIESC_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchPcieSmm.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSpiRuntime.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchPolicyInitDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchBiosWriteProtect.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmmAccess.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PciHostBridge.inf
!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/VlvInitDxe.inf
!else
INF IntelFrameworkModulePkg/Universal/LegacyRegionDxe/LegacyRegionDxe.inf
INF Vlv2TbltDevicePkg/VlvPlatformInitDxe/VlvPlatformInitDxe.inf
!endif
!if $(MINNOW2_FSP_BUILD) == FALSE
!if $(SEC_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/HeciDrv.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SeCPolicyInitDxe.inf
!endif
!endif
!if $(TPM_ENABLED) == TRUE
INF SecurityPkg/Tcg/TcgConfigDxe/TcgConfigDxe.inf
INF SecurityPkg/Tcg/TcgDxe/TcgDxe.inf
INF RuleOverride = DRIVER_ACPITABLE SecurityPkg/Tcg/TcgSmm/TcgSmm.inf
!endif
!if $(FTPM_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/Tpm2DeviceSeCPei.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/Tpm2DeviceSeCDxe.inf
INF SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf
INF SecurityPkg/Tcg/TrEEDxe/TrEEDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/FtpmSmm.inf
!endif
#
# EDK II Related Platform codes
#
INF $(PLATFORM_PACKAGE)/PlatformSmm/PlatformSmm.inf
INF $(PLATFORM_PACKAGE)/PlatformInfoDxe/PlatformInfoDxe.inf
INF $(PLATFORM_PACKAGE)/PlatformCpuInfoDxe/PlatformCpuInfoDxe.inf
INF $(PLATFORM_PACKAGE)/PlatformDxe/PlatformDxe.inf
INF $(PLATFORM_PACKAGE)/PciPlatform/PciPlatform.inf
INF $(PLATFORM_PACKAGE)/SaveMemoryConfig/SaveMemoryConfig.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PlatformCpuPolicy.inf
INF $(PLATFORM_PACKAGE)/PpmPolicy/PpmPolicy.inf
INF $(PLATFORM_PACKAGE)/SmramSaveInfoHandlerSmm/SmramSaveInfoHandlerSmm.inf
!if $(GOP_DRIVER_ENABLE) == TRUE
INF $(PLATFORM_PACKAGE)/PlatformGopPolicy/PlatformGopPolicy.inf
FILE DRIVER = FF0C8745-3270-4439-B74F-3E45F8C77064 {
SECTION DXE_DEPEX_EXP = {gPlatformGOPPolicyGuid}
SECTION PE32 = Vlv2MiscBinariesPkg/GOP/7.2.1011/RELEASE_VS2008x86/$(DXE_ARCHITECTURE)/IntelGopDriver.efi
SECTION UI = "IntelGopDriver"
}
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PnpDxe.inf
#
# SMM
#
INF MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
INF MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PiSmmCpuDxeSmm.inf
INF UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf
INF MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PiSmmCommunicationSmm.inf
INF $(PLATFORM_PACKAGE)/SmmSwDispatch2OnSmmSwDispatchThunk/SmmSwDispatch2OnSmmSwDispatchThunk.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PowerManagement2.inf
# INF Vlv2DeviceRefCodePkg/ValleyView2Soc/CPU/Dts/Smm/DigitalThermalSensor.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/DigitalThermalSensor.inf
#
# ACPI
#
INF MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
INF $(PLATFORM_PACKAGE)/BootScriptSaveDxe/BootScriptSaveDxe.inf
INF IntelFrameworkModulePkg/Universal/Acpi/AcpiSupportDxe/AcpiSupportDxe.inf
INF RuleOverride = ACPITABLE2 Vlv2DeviceRefCodePkg/ValleyView2Soc/CPU/PowerManagement/AcpiTables/PowerManagementAcpiTables.inf
INF RuleOverride = ACPITABLE $(PLATFORM_RC_PACKAGE)/AcpiTablesPCAT/AcpiTables.inf
INF $(PLATFORM_PACKAGE)/AcpiPlatform/AcpiPlatform.inf
#
# PCI
#
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/ISPDxe.inf
#
# ISA
#
INF $(PLATFORM_PACKAGE)/Wpce791/Wpce791.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaIoDxe/IsaIoDxe.inf
!if $(SOURCE_DEBUG_ENABLE) != TRUE
INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
!endif
#INF IntelFrameworkModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.inf
#INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
#
# SDIO
#
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/MmcHost.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/MmcMediaDevice.inf
#
# IDE/SCSI/AHCI
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
!if $(SATA_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SataController.inf
#
#
INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
INF MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
!if $(SCSI_ENABLE) == TRUE
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
!endif
#
!endif
# Console
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF IntelFrameworkModulePkg/Universal/Console/VgaClassDxe/VgaClassDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
#
# USB
#
!if $(USB_ENABLE) == TRUE
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF Vlv2TbltDevicePkg/Override/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
!endif
#
# ECP
#
INF EdkCompatibilityPkg/Compatibility/LegacyRegion2OnLegacyRegionThunk/LegacyRegion2OnLegacyRegionThunk.inf
INF EdkCompatibilityPkg/Compatibility/SmmBaseOnSmmBase2Thunk/SmmBaseOnSmmBase2Thunk.inf
INF EdkCompatibilityPkg/Compatibility/SmmBaseHelper/SmmBaseHelper.inf
INF EdkCompatibilityPkg/Compatibility/SmmAccess2OnSmmAccessThunk/SmmAccess2OnSmmAccessThunk.inf
INF EdkCompatibilityPkg/Compatibility/SmmControl2OnSmmControlThunk/SmmControl2OnSmmControlThunk.inf
INF EdkCompatibilityPkg/Compatibility/FvOnFv2Thunk/FvOnFv2Thunk.inf
#
# SMBIOS
#
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF $(PLATFORM_PACKAGE)/SmBiosMiscDxe/SmBiosMiscDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmbiosMemory.inf
#
# Legacy Modules
#
INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
#
# FAT file system
#
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
SECTION PE32 = FatBinPkg/EnhancedFatDxe/$(EDK_DXE_ARCHITECTURE)/Fat.efi
}
#
# UEFI Shell
#
FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {
# SECTION PE32 = EdkShellBinPkg/FullShell/$(EDK_DXE_ARCHITECTURE)/Shell_Full.efi
SECTION PE32 = EdkShellBinPkg/MinimumShell/$(EDK_DXE_ARCHITECTURE)/Shell.efi
}
!if $(GOP_DRIVER_ENABLE) == TRUE
FILE FREEFORM = 878AC2CC-5343-46F2-B563-51F89DAF56BA {
SECTION RAW = Vlv2MiscBinariesPkg/GOP/7.2.1011/VBT/MNW2/Vbt.bin
SECTION UI = "IntelGopVbt"
}
!endif
#
# Network Modules
#
!if $(NETWORK_ENABLE) == TRUE
FILE DRIVER = 22DE1691-D65D-456a-993E-A253DD1F308C {
SECTION PE32 = Vlv2MiscBinariesPkg/UNDI/RtkUndiDxe/$(DXE_ARCHITECTURE)/RtkUndiDxe.efi
SECTION UI = "UNDI"
}
INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
!if $(NETWORK_IP6_ENABLE) == TRUE
INF NetworkPkg/Ip6Dxe/Ip6Dxe.inf
INF NetworkPkg/Dhcp6Dxe/Dhcp6Dxe.inf
INF NetworkPkg/IpSecDxe/IpSecDxe.inf
INF NetworkPkg/Udp6Dxe/Udp6Dxe.inf
INF NetworkPkg/Mtftp6Dxe/Mtftp6Dxe.inf
!endif
!if $(NETWORK_IP6_ENABLE) == TRUE
INF NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF NetworkPkg/TcpDxe/TcpDxe.inf
!else
INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
!endif
!if $(NETWORK_VLAN_ENABLE) == TRUE
INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
!endif
!if $(NETWORK_ISCSI_ENABLE) == TRUE
!if $(NETWORK_IP6_ENABLE) == TRUE
INF NetworkPkg/IScsiDxe/IScsiDxe.inf
!else
INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
!endif
!endif
!endif
[FV.FVMAIN_COMPACT]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
!if $(LZMA_ENABLE) == TRUE
# LZMA Compress
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
!else
!if $(DXE_COMPRESS_ENABLE) == TRUE
# Tiano Compress
SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
!else
# No Compress
SECTION COMPRESS PI_NONE {
SECTION FV_IMAGE = FVMAIN
}
!endif
!endif
}
[FV.SETUP_DATA]
BlockSize = $(FLASH_BLOCK_SIZE)
#NumBlocks = 0x10
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
[FV.Update_Data]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FILE RAW = 88888888-8888-8888-8888-888888888888 {
FD = Vlv
}
[FV.BiosUpdateCargo]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
[FV.BiosUpdate]
BlockSize = $(FLASH_BLOCK_SIZE)
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
[Capsule.Capsule_Boot]
#
# gEfiCapsuleGuid supported by platform
# { 0x3B6686BD, 0x0D76, 0x4030, { 0xB7, 0x0E, 0xB5, 0x51, 0x9E, 0x2F, 0xC5, 0xA0 }}
#
CAPSULE_GUID = 3B6686BD-0D76-4030-B70E-B5519E2FC5A0
CAPSULE_FLAGS = PersistAcrossReset
CAPSULE_HEADER_SIZE = 0x20
FV = BiosUpdate
[Capsule.Capsule_Reset]
#
# gEfiCapsuleGuid supported by platform
# { 0x3B6686BD, 0x0D76, 0x4030, { 0xB7, 0x0E, 0xB5, 0x51, 0x9E, 0x2F, 0xC5, 0xA0 }}
#
CAPSULE_GUID = 3B6686BD-0D76-4030-B70E-B5519E2FC5A0
CAPSULE_FLAGS = PersistAcrossReset
CAPSULE_HEADER_SIZE = 0x20
FV = BiosUpdate
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
PE32 PE32 Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi
RAW BIN Align = 16 |.com
}
[Rule.Common.SEC.BINARY]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
PE32 PE32 Align = 8 |.efi
RAW BIN Align = 16 |.com
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM.BINARY]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional |.depex
PE32 PE32 Align = Auto |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM.BIOSID]
FILE PEIM = $(NAMED_GUID) {
RAW BIN BiosId.bin
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED.APINIT]
FILE RAW = $(NAMED_GUID) Fixed Align=4K {
RAW SEC_BIN |.com
}
#cjia 2011-07-21
[Rule.Common.USER_DEFINED.LEGACY16]
FILE FREEFORM = $(NAMED_GUID) {
UI STRING="$(MODULE_NAME)" Optional
RAW BIN |.bin
}
#cjia
[Rule.Common.USER_DEFINED.ASM16]
FILE FREEFORM = $(NAMED_GUID) {
UI STRING="$(MODULE_NAME)" Optional
RAW BIN |.com
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER.NATIVE_BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(WORKSPACE)/$(PLATFORM_PACKAGE)/IntelGopDepex/IntelGopDriver.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER.DRIVER_ACPITABLE]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_RUNTIME_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_SMM_DRIVER]
FILE SMM = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_SMM_DRIVER.BINARY]
FILE SMM = $(NAMED_GUID) {
SMM_DEPEX SMM_DEPEX |.depex
PE32 PE32 |.efi
RAW BIN Optional |.aml
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_SMM_DRIVER.DRIVER_ACPITABLE]
FILE SMM = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
}
[Rule.Common.SMM_CORE]
FILE SMM_CORE = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.SMM_CORE.BINARY]
FILE SMM_CORE = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.UI]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="Enter Setup"
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED]
FILE FREEFORM = $(NAMED_GUID) {
UI STRING="$(MODULE_NAME)" Optional
RAW BIN |.bin
}
[Rule.Common.USER_DEFINED.ACPITABLE]
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
}
[Rule.Common.USER_DEFINED.ACPITABLE2]
FILE FREEFORM = $(NAMED_GUID) {
RAW ASL Optional |.aml
}
[Rule.Common.ACPITABLE]
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
}