blob: caba8f445bd83c23d6f6063bc24faa7c52f99407 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
|
/** @file
*
* Copyright (c) 2011, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#ifndef _PL341DMC_H_
#define _PL341DMC_H_
typedef struct {
UINTN HasQos; // has QoS registers
UINTN MaxChip; // number of memory chips accessible
BOOLEAN IsUserCfg;
UINT32 User0Cfg;
UINT32 User2Cfg;
UINT32 RefreshPeriod;
UINT32 CasLatency;
UINT32 WriteLatency;
UINT32 t_mrd;
UINT32 t_ras;
UINT32 t_rc;
UINT32 t_rcd;
UINT32 t_rfc;
UINT32 t_rp;
UINT32 t_rrd;
UINT32 t_wr;
UINT32 t_wtr;
UINT32 t_xp;
UINT32 t_xsr;
UINT32 t_esr;
UINT32 MemoryCfg;
UINT32 MemoryCfg2;
UINT32 MemoryCfg3;
UINT32 ChipCfg0;
UINT32 ChipCfg1;
UINT32 ChipCfg2;
UINT32 ChipCfg3;
UINT32 t_faw;
UINT32 t_data_en;
UINT32 t_wdata_en;
UINT32 ModeReg;
UINT32 ExtModeReg;
} PL341_DMC_CONFIG;
/* Memory config bit fields */
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_9 0x1
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_10 0x2
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_11 0x3
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_12 0x4
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_11 (0x0 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_12 (0x1 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_13 (0x2 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_14 (0x3 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_15 (0x4 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_16 (0x5 << 3)
#define DMC_MEMORY_CONFIG_BURST_2 (0x1 << 15)
#define DMC_MEMORY_CONFIG_BURST_4 (0x2 << 15)
#define DMC_MEMORY_CONFIG_BURST_8 (0x3 << 15)
#define DMC_MEMORY_CONFIG_BURST_16 (0x4 << 15)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_1 (0x0 << 21)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_2 (0x1 << 21)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_3 (0x2 << 21)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_4 (0x3 << 21)
#define DMC_MEMORY_CFG2_CLK_ASYNC (0x0 << 0)
#define DMC_MEMORY_CFG2_CLK_SYNC (0x1 << 0)
#define DMC_MEMORY_CFG2_DQM_INIT (0x1 << 2)
#define DMC_MEMORY_CFG2_CKE_INIT (0x1 << 3)
#define DMC_MEMORY_CFG2_BANK_BITS_2 (0x0 << 4)
#define DMC_MEMORY_CFG2_BANK_BITS_3 (0x3 << 4)
#define DMC_MEMORY_CFG2_MEM_WIDTH_16 (0x0 << 6)
#define DMC_MEMORY_CFG2_MEM_WIDTH_32 (0x1 << 6)
#define DMC_MEMORY_CFG2_MEM_WIDTH_64 (0x2 << 6)
#define DMC_MEMORY_CFG2_MEM_WIDTH_RESERVED (0x3 << 6)
//
// DMC Configuration Register Map
//
#define DMC_STATUS_REG 0x00
#define DMC_COMMAND_REG 0x04
#define DMC_DIRECT_CMD_REG 0x08
#define DMC_MEMORY_CONFIG_REG 0x0C
#define DMC_REFRESH_PRD_REG 0x10
#define DMC_CAS_LATENCY_REG 0x14
#define DMC_WRITE_LATENCY_REG 0x18
#define DMC_T_MRD_REG 0x1C
#define DMC_T_RAS_REG 0x20
#define DMC_T_RC_REG 0x24
#define DMC_T_RCD_REG 0x28
#define DMC_T_RFC_REG 0x2C
#define DMC_T_RP_REG 0x30
#define DMC_T_RRD_REG 0x34
#define DMC_T_WR_REG 0x38
#define DMC_T_WTR_REG 0x3C
#define DMC_T_XP_REG 0x40
#define DMC_T_XSR_REG 0x44
#define DMC_T_ESR_REG 0x48
#define DMC_MEMORY_CFG2_REG 0x4C
#define DMC_MEMORY_CFG3_REG 0x50
#define DMC_T_FAW_REG 0x54
#define DMC_T_RDATA_EN 0x5C /* DFI read data enable register */
#define DMC_T_WRLAT_DIFF 0x60 /* DFI write data enable register */
// Returns the state of the memory controller:
#define DMC_STATUS_CONFIG 0x0
#define DMC_STATUS_READY 0x1
#define DMC_STATUS_PAUSED 0x2
#define DMC_STATUS_LOWPOWER 0x3
// Changes the state of the memory controller:
#define DMC_COMMAND_GO 0x0
#define DMC_COMMAND_SLEEP 0x1
#define DMC_COMMAND_WAKEUP 0x2
#define DMC_COMMAND_PAUSE 0x3
#define DMC_COMMAND_CONFIGURE 0x4
#define DMC_COMMAND_ACTIVEPAUSE 0x7
// Determines the command required
#define DMC_DIRECT_CMD_MEMCMD_PRECHARGEALL 0x0
#define DMC_DIRECT_CMD_MEMCMD_AUTOREFRESH (0x1 << 18)
#define DMC_DIRECT_CMD_MEMCMD_MODEREG (0x2 << 18)
#define DMC_DIRECT_CMD_MEMCMD_EXTMODEREG (0x2 << 18)
#define DMC_DIRECT_CMD_MEMCMD_NOP (0x3 << 18)
#define DMC_DIRECT_CMD_MEMCMD_DPD (0x1 << 22)
#define DMC_DIRECT_CMD_BANKADDR(n) ((n & 0x3) << 16)
#define DMC_DIRECT_CMD_CHIP_ADDR(n) ((n & 0x3) << 20)
//
// AXI ID configuration register map
//
#define DMC_ID_0_CFG_REG 0x100
#define DMC_ID_1_CFG_REG 0x104
#define DMC_ID_2_CFG_REG 0x108
#define DMC_ID_3_CFG_REG 0x10C
#define DMC_ID_4_CFG_REG 0x110
#define DMC_ID_5_CFG_REG 0x114
#define DMC_ID_6_CFG_REG 0x118
#define DMC_ID_7_CFG_REG 0x11C
#define DMC_ID_8_CFG_REG 0x120
#define DMC_ID_9_CFG_REG 0x124
#define DMC_ID_10_CFG_REG 0x128
#define DMC_ID_11_CFG_REG 0x12C
#define DMC_ID_12_CFG_REG 0x130
#define DMC_ID_13_CFG_REG 0x134
#define DMC_ID_14_CFG_REG 0x138
#define DMC_ID_15_CFG_REG 0x13C
// Set the QoS
#define DMC_ID_CFG_QOS_DISABLE 0
#define DMC_ID_CFG_QOS_ENABLE 1
#define DMC_ID_CFG_QOS_MIN 2
//
// Chip configuration register map
//
#define DMC_CHIP_0_CFG_REG 0x200
#define DMC_CHIP_1_CFG_REG 0x204
#define DMC_CHIP_2_CFG_REG 0x208
#define DMC_CHIP_3_CFG_REG 0x20C
//
// User Defined Pins
//
#define DMC_USER_STATUS_REG 0x300
#define DMC_USER_0_CFG_REG 0x304
#define DMC_USER_1_CFG_REG 0x308
#define DMC_FEATURE_CRTL_REG 0x30C
#define DMC_USER_2_CFG_REG 0x310
//
// PHY Register Settings
//
#define PHY_PTM_DFI_CLK_RANGE 0xE00 // DDR2 PHY PTM register offset
#define PHY_PTM_IOTERM 0xE04
#define PHY_PTM_PLL_EN 0xe0c
#define PHY_PTM_PLL_RANGE 0xe18
#define PHY_PTM_FEEBACK_DIV 0xe1c
#define PHY_PTM_RCLK_DIV 0xe20
#define PHY_PTM_LOCK_STATUS 0xe28
#define PHY_PTM_INIT_DONE 0xe34
#define PHY_PTM_ADDCOM_IOSTR_OFF 0xec8
#define PHY_PTM_SQU_TRAINING 0xee8
#define PHY_PTM_SQU_STAT 0xeec
// ==============================================================================
// PIPD 40G DDR2/DDR3 PHY Register definitions
//
// Offsets from APB Base Address
// ==============================================================================
#define PHY_BYTE0_OFFSET 0x000
#define PHY_BYTE1_OFFSET 0x200
#define PHY_BYTE2_OFFSET 0x400
#define PHY_BYTE3_OFFSET 0x600
#define PHY_BYTE0_COARSE_SQADJ_INIT 0x064 ;// Coarse squelch adjust
#define PHY_BYTE1_COARSE_SQADJ_INIT 0x264 ;// Coarse squelch adjust
#define PHY_BYTE2_COARSE_SQADJ_INIT 0x464 ;// Coarse squelch adjust
#define PHY_BYTE3_COARSE_SQADJ_INIT 0x664 ;// Coarse squelch adjust
#define PHY_BYTE0_IOSTR_OFFSET 0x004
#define PHY_BYTE1_IOSTR_OFFSET 0x204
#define PHY_BYTE2_IOSTR_OFFSET 0x404
#define PHY_BYTE3_IOSTR_OFFSET 0x604
;//--------------------------------------------------------------------------
// DFI Clock ranges:
#define PHY_PTM_DFI_CLK_RANGE_200MHz 0x0
#define PHY_PTM_DFI_CLK_RANGE_201_267MHz 0x1
#define PHY_PTM_DFI_CLK_RANGE_268_333MHz 0x2
#define PHY_PTM_DFI_CLK_RANGE_334_400MHz 0x3
#define PHY_PTM_DFI_CLK_RANGE_401_533MHz 0x4
#define PHY_PTM_DFI_CLK_RANGE_534_667MHz 0x5
#define PHY_PTM_DFI_CLK_RANGE_668_800MHz 0x6
#define PHY_PTM_DFI_CLK_RANGE_VAL PHY_PTM_DFI_CLK_RANGE_334_400MHz
//--------------------------------------------------------------------------
// PLL Range
#define PHY_PTM_PLL_RANGE_200_400MHz 0x0 // b0 = frequency >= 200 MHz and < 400 MHz
#define PHY_PTM_PLL_RANGE_400_800MHz 0x1 // b1 = frequency >= 400 MHz.
#define PHY_PTM_FEEBACK_DIV_200_400MHz 0x0 // b0 = frequency >= 200 MHz and < 400 MHz
#define PHY_PTM_FEEBACK_DIV_400_800MHz 0x1 // b1 = frequency >= 400 MHz.
#define PHY_PTM_REFCLK_DIV_200_400MHz 0x0
#define PHY_PTM_REFCLK_DIV_400_800MHz 0x1
#define TC_UIOLHNC_MASK 0x000003C0
#define TC_UIOLHNC_SHIFT 0x6
#define TC_UIOLHPC_MASK 0x0000003F
#define TC_UIOLHPC_SHIFT 0x2
#define TC_UIOHOCT_MASK 0x2
#define TC_UIOHOCT_SHIFT 0x1
#define TC_UIOHSTOP_SHIFT 0x0
#define TC_UIOLHXC_VALUE 0x4
#define PHY_PTM_SQU_TRAINING_ENABLE 0x1
#define PHY_PTM_SQU_TRAINING_DISABLE 0x0
//--------------------------------------
// JEDEC DDR2 Device Register definitions and settings
//--------------------------------------
#define DDR_MODESET_SHFT 14
#define DDR_MODESET_MR 0x0 ;// Mode register
#define DDR_MODESET_EMR 0x1 ;// Extended Mode register
#define DDR_MODESET_EMR2 0x2
#define DDR_MODESET_EMR3 0x3
//
// Extended Mode Register settings
//
#define DDR_EMR_OCD_MASK 0x0000380
#define DDR_EMR_OCD_SHIFT 0x7
#define DDR_EMR_RTT_MASK 0x00000044 // DDR2 Device RTT (ODT) settings
#define DDR_EMR_RTT_SHIFT 0x2
#define DDR_EMR_ODS_MASK 0x00000002 // DDR2 Output Drive Strength
#define DDR_EMR_ODS_SHIFT 0x0001
// Termination Values:
#define DDR_EMR_RTT_50R 0x00000044 // DDR2 50 Ohm termination
#define DDR_EMR_RTT_75R 0x00000004 // DDR2 75 Ohm termination
#define DDR_EMR_RTT_150 0x00000040 // DDR2 150 Ohm termination
// Output Drive Strength Values:
#define DDR_EMR_ODS_FULL 0x0 // DDR2 Full Drive Strength
#define DDR_EMR_ODS_HALF 0x1 // DDR2 Half Drive Strength
// OCD values
#define DDR_EMR_OCD_DEFAULT 0x7
#define DDR_EMR_OCD_NS 0x0
#define DDR_EMR_ODS_VAL DDR_EMR_ODS_FULL
#define DDR_SDRAM_START_ADDR 0x10000000
// ----------------------------------------
// PHY IOTERM values
// ----------------------------------------
#define PHY_PTM_IOTERM_OFF 0x0
#define PHY_PTM_IOTERM_150R 0x1
#define PHY_PTM_IOTERM_75R 0x2
#define PHY_PTM_IOTERM_50R 0x3
#define PHY_BYTE_IOSTR_60OHM 0x0
#define PHY_BYTE_IOSTR_40OHM 0x1
#define PHY_BYTE_IOSTR_30OHM 0x2
#define PHY_BYTE_IOSTR_30AOHM 0x3
#define DDR2_MR_BURST_LENGTH_4 (2)
#define DDR2_MR_BURST_LENGTH_8 (3)
#define DDR2_MR_DLL_RESET (1 << 8)
#define DDR2_MR_CAS_LATENCY_4 (4 << 4)
#define DDR2_MR_CAS_LATENCY_5 (5 << 4)
#define DDR2_MR_CAS_LATENCY_6 (6 << 4)
#define DDR2_MR_WR_CYCLES_2 (1 << 9)
#define DDR2_MR_WR_CYCLES_3 (2 << 9)
#define DDR2_MR_WR_CYCLES_4 (3 << 9)
#define DDR2_MR_WR_CYCLES_5 (4 << 9)
#define DDR2_MR_WR_CYCLES_6 (5 << 9)
VOID
PL341DmcInit (
IN UINTN DmcBase,
IN PL341_DMC_CONFIG* DmcConfig
);
VOID PL341DmcPhyInit (
IN UINTN DmcPhyBase
);
VOID PL341DmcTrainPHY (
IN UINTN DmcPhyBase
);
#endif /* _PL341DMC_H_ */
|
