path: root/IntelFspPkg/FspDxeIpl/DxeIpl.c

/** @file

  Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php.

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "DxeIpl.h"


//
// Module Globals used in the DXE to PEI hand off
// These must be module globals, so the stack can be switched
//
CONST EFI_DXE_IPL_PPI mDxeIplPpi = {
  DxeLoadCore
};

CONST EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI mCustomGuidedSectionExtractionPpi = {
  CustomGuidedSectionExtract
};

CONST EFI_PEI_DECOMPRESS_PPI mDecompressPpi = {
  Decompress
};

CONST EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {
  {
    EFI_PEI_PPI_DESCRIPTOR_PPI,
    &gEfiDxeIplPpiGuid,
    (VOID *) &mDxeIplPpi
  },
  {
    (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
    &gEfiPeiDecompressPpiGuid,
    (VOID *) &mDecompressPpi
  }
};

CONST EFI_PEI_PPI_DESCRIPTOR gEndOfPeiSignalPpi = {
  (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
  &gEfiEndOfPeiSignalPpiGuid,
  NULL
};

/**
  Entry point of DXE IPL PEIM.

  This function installs DXE IPL PPI and Decompress PPI.  It also reloads
  itself to memory on non-S3 resume boot path.

  @param[in] FileHandle  Handle of the file being invoked.
  @param[in] PeiServices Describes the list of possible PEI Services.

  @retval EFI_SUCESS  The entry point of DXE IPL PEIM executes successfully.
  @retval Others      Some error occurs during the execution of this function.

**/
EFI_STATUS
EFIAPI
PeimInitializeDxeIpl (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  EFI_STATUS                                Status;
  EFI_GUID                                  *ExtractHandlerGuidTable;
  UINTN                                     ExtractHandlerNumber;
  EFI_PEI_PPI_DESCRIPTOR                    *GuidPpi;

  //
  // Get custom extract guided section method guid list
  //
  ExtractHandlerNumber = ExtractGuidedSectionGetGuidList (&ExtractHandlerGuidTable);

  //
  // Install custom extraction guid PPI
  //
  if (ExtractHandlerNumber > 0) {
    GuidPpi = (EFI_PEI_PPI_DESCRIPTOR *) AllocatePool (ExtractHandlerNumber * sizeof (EFI_PEI_PPI_DESCRIPTOR));
    ASSERT (GuidPpi != NULL);
    while (ExtractHandlerNumber-- > 0) {
      GuidPpi->Flags = EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST;
      GuidPpi->Ppi   = (VOID *) &mCustomGuidedSectionExtractionPpi;
      GuidPpi->Guid  = &ExtractHandlerGuidTable[ExtractHandlerNumber];
      Status = PeiServicesInstallPpi (GuidPpi++);
      ASSERT_EFI_ERROR(Status);
    }
  }

  //
  // Install DxeIpl and Decompress PPIs.
  //
  Status = PeiServicesInstallPpi (mPpiList);
  ASSERT_EFI_ERROR(Status);

  return Status;
}

/**
  The ExtractSection() function processes the input section and
  returns a pointer to the section contents. If the section being
  extracted does not require processing (if the section
  GuidedSectionHeader.Attributes has the
  EFI_GUIDED_SECTION_PROCESSING_REQUIRED field cleared), then
  OutputBuffer is just updated to point to the start of the
  section's contents. Otherwise, *Buffer must be allocated
  from PEI permanent memory.

  @param[in]  This                   Indicates the
                                     EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI instance.
                                     Buffer containing the input GUIDed section to be
                                     processed. OutputBuffer OutputBuffer is
                                     allocated from PEI permanent memory and contains
                                     the new section stream.
  @param[in]  InputSection           A pointer to the input buffer, which contains
                                     the input section to be processed.
  @param[out] OutputBuffer           A pointer to a caller-allocated buffer, whose
                                     size is specified by the contents of OutputSize.
  @param[out] OutputSize             A pointer to a caller-allocated
                                     UINTN in which the size of *OutputBuffer
                                     allocation is stored. If the function
                                     returns anything other than EFI_SUCCESS,
                                     the value of OutputSize is undefined.
  @param[out] AuthenticationStatus   A pointer to a caller-allocated
                                     UINT32 that indicates the
                                     authentication status of the
                                     output buffer. If the input
                                     section's GuidedSectionHeader.
                                     Attributes field has the
                                     EFI_GUIDED_SECTION_AUTH_STATUS_VALID
                                     bit as clear,
                                     AuthenticationStatus must return
                                     zero. These bits reflect the
                                     status of the extraction
                                     operation. If the function
                                     returns anything other than
                                     EFI_SUCCESS, the value of
                                     AuthenticationStatus is
                                     undefined.

  @retval EFI_SUCCESS           The InputSection was
                                successfully processed and the
                                section contents were returned.

  @retval EFI_OUT_OF_RESOURCES  The system has insufficient
                                resources to process the request.

  @retval EFI_INVALID_PARAMETER The GUID in InputSection does
                                not match this instance of the
                                GUIDed Section Extraction PPI.

**/
EFI_STATUS
EFIAPI
CustomGuidedSectionExtract (
  IN CONST  EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI *This,
  IN CONST  VOID                                  *InputSection,
  OUT       VOID                                  **OutputBuffer,
  OUT       UINTN                                 *OutputSize,
  OUT       UINT32                                *AuthenticationStatus
)
{
  EFI_STATUS      Status;
  UINT8           *ScratchBuffer;
  UINT32          ScratchBufferSize;
  UINT32          OutputBufferSize;
  UINT16          SectionAttribute;

  //
  // Init local variable
  //
  ScratchBuffer = NULL;

  //
  // Call GetInfo to get the size and attribute of input guided section data.
  //
  Status = ExtractGuidedSectionGetInfo (
             InputSection,
             &OutputBufferSize,
             &ScratchBufferSize,
             &SectionAttribute
             );

  if (EFI_ERROR (Status)) {
    DEBUG ((DEBUG_ERROR, "GetInfo from guided section Failed - %r\n", Status));
    return Status;
  }

  if (ScratchBufferSize != 0) {
    //
    // Allocate scratch buffer
    //
    ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));
    if (ScratchBuffer == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }
  }

  if (((SectionAttribute & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) != 0) && OutputBufferSize > 0) {
    //
    // Allocate output buffer
    //
    *OutputBuffer = AllocatePages (EFI_SIZE_TO_PAGES (OutputBufferSize) + 1);
    if (*OutputBuffer == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }
    DEBUG ((DEBUG_INFO, "Customized Guided section Memory Size required is 0x%x and address is 0x%p\n", OutputBufferSize, *OutputBuffer));
    //
    // *OutputBuffer still is one section. Adjust *OutputBuffer offset,
    // skip EFI section header to make section data at page alignment.
    //
    *OutputBuffer = (VOID *)((UINT8 *) *OutputBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER));
  }

  Status = ExtractGuidedSectionDecode (
             InputSection,
             OutputBuffer,
             ScratchBuffer,
             AuthenticationStatus
             );
  if (EFI_ERROR (Status)) {
    //
    // Decode failed
    //
    DEBUG ((DEBUG_ERROR, "Extract guided section Failed - %r\n", Status));
    return Status;
  }

  *OutputSize = (UINTN) OutputBufferSize;

  return EFI_SUCCESS;
}



/**
   Decompresses a section to the output buffer.

   This function looks up the compression type field in the input section and
   applies the appropriate compression algorithm to compress the section to a
   callee allocated buffer.

   @param[in]  This                  Points to this instance of the
                                     EFI_PEI_DECOMPRESS_PEI PPI.
   @param[in]  CompressionSection    Points to the compressed section.
   @param[out] OutputBuffer          Holds the returned pointer to the decompressed
                                     sections.
   @param[out] OutputSize            Holds the returned size of the decompress
                                     section streams.

   @retval EFI_SUCCESS           The section was decompressed successfully.
                                 OutputBuffer contains the resulting data and
                                 OutputSize contains the resulting size.

**/
EFI_STATUS
EFIAPI
Decompress (
  IN CONST  EFI_PEI_DECOMPRESS_PPI  *This,
  IN CONST  EFI_COMPRESSION_SECTION *CompressionSection,
  OUT       VOID                    **OutputBuffer,
  OUT       UINTN                   *OutputSize
 )
{
  EFI_STATUS                      Status;
  UINT8                           *DstBuffer;
  UINT8                           *ScratchBuffer;
  UINT32                          DstBufferSize;
  UINT32                          ScratchBufferSize;
  VOID                            *CompressionSource;
  UINT32                          CompressionSourceSize;
  UINT32                          UncompressedLength;
  UINT8                           CompressionType;

  if (CompressionSection->CommonHeader.Type != EFI_SECTION_COMPRESSION) {
    ASSERT (FALSE);
    return EFI_INVALID_PARAMETER;
  }

  if (IS_SECTION2 (CompressionSection)) {
    CompressionSource = (VOID *) ((UINT8 *) CompressionSection + sizeof (EFI_COMPRESSION_SECTION2));
    CompressionSourceSize = (UINT32) (SECTION2_SIZE (CompressionSection) - sizeof (EFI_COMPRESSION_SECTION2));
    UncompressedLength = ((EFI_COMPRESSION_SECTION2 *) CompressionSection)->UncompressedLength;
    CompressionType = ((EFI_COMPRESSION_SECTION2 *) CompressionSection)->CompressionType;
  } else {
    CompressionSource = (VOID *) ((UINT8 *) CompressionSection + sizeof (EFI_COMPRESSION_SECTION));
    CompressionSourceSize = (UINT32) (SECTION_SIZE (CompressionSection) - sizeof (EFI_COMPRESSION_SECTION));
    UncompressedLength = CompressionSection->UncompressedLength;
    CompressionType = CompressionSection->CompressionType;
  }

  //
  // This is a compression set, expand it
  //
  switch (CompressionType) {
  case EFI_STANDARD_COMPRESSION:
    if (TRUE) {
      //
      // Load EFI standard compression.
      // For compressed data, decompress them to destination buffer.
      //
      Status = UefiDecompressGetInfo (
                 CompressionSource,
                 CompressionSourceSize,
                 &DstBufferSize,
                 &ScratchBufferSize
                 );
      if (EFI_ERROR (Status)) {
        //
        // GetInfo failed
        //
        DEBUG ((DEBUG_ERROR, "Decompress GetInfo Failed - %r\n", Status));
        return EFI_NOT_FOUND;
      }
      //
      // Allocate scratch buffer
      //
      ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));
      if (ScratchBuffer == NULL) {
        return EFI_OUT_OF_RESOURCES;
      }
      //
      // Allocate destination buffer, extra one page for adjustment
      //
      DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize) + 1);
      if (DstBuffer == NULL) {
        return EFI_OUT_OF_RESOURCES;
      }
      //
      // DstBuffer still is one section. Adjust DstBuffer offset, skip EFI section header
      // to make section data at page alignment.
      //
      DstBuffer = DstBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER);
      //
      // Call decompress function
      //
      Status = UefiDecompress (
                  CompressionSource,
                  DstBuffer,
                  ScratchBuffer
                  );
      if (EFI_ERROR (Status)) {
        //
        // Decompress failed
        //
        DEBUG ((DEBUG_ERROR, "Decompress Failed - %r\n", Status));
        return EFI_NOT_FOUND;
      }
      break;
    } else {
      //
      // PcdDxeIplSupportUefiDecompress is FALSE
      // Don't support UEFI decompression algorithm.
      //
      ASSERT (FALSE);
      return EFI_NOT_FOUND;
    }

  case EFI_NOT_COMPRESSED:
    //
    // Allocate destination buffer
    //
    DstBufferSize = UncompressedLength;
    DstBuffer     = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize) + 1);
    if (DstBuffer == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }
    //
    // Adjust DstBuffer offset, skip EFI section header
    // to make section data at page alignment.
    //
    DstBuffer = DstBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER);
    //
    // stream is not actually compressed, just encapsulated.  So just copy it.
    //
    CopyMem (DstBuffer, CompressionSource, DstBufferSize);
    break;

  default:
    //
    // Don't support other unknown compression type.
    //
    ASSERT (FALSE);
    return EFI_NOT_FOUND;
  }

  *OutputSize = DstBufferSize;
  *OutputBuffer = DstBuffer;

  return EFI_SUCCESS;
}

/**
   Main entry point to last PEIM.

   This function finds DXE Core in the firmware volume and transfer the control to
   DXE core.

   @param[in] This          Entry point for DXE IPL PPI.
   @param[in] PeiServices   General purpose services available to every PEIM.
   @param[in] HobList       Address to the Pei HOB list.

   @return EFI_SUCCESS              DXE core was successfully loaded.
   @return EFI_OUT_OF_RESOURCES     There are not enough resources to load DXE core.

**/
EFI_STATUS
EFIAPI
DxeLoadCore (
  IN CONST EFI_DXE_IPL_PPI *This,
  IN EFI_PEI_SERVICES      **PeiServices,
  IN EFI_PEI_HOB_POINTERS  HobList
  )
{
  EFI_STATUS   Status;

  DEBUG ((DEBUG_INFO | DEBUG_INIT, "FSP HOB is located at 0x%08X\n", HobList));

  //
  // Give control back to bootloader after FspInit
  //
  DEBUG ((DEBUG_INFO | DEBUG_INIT, "FSP is waiting for NOTIFY\n"));
  FspInitDone ();

  //
  // Bootloader called FSP again through NotifyPhase
  //
  FspWaitForNotify ();

  //
  // End of PEI phase signal
  //
  Status = PeiServicesInstallPpi (&gEndOfPeiSignalPpi);
  ASSERT_EFI_ERROR (Status);

  //
  // Give control back to the boot loader framework caller
  //
  DEBUG ((DEBUG_INFO | DEBUG_INIT,   "============= PEIM FSP is Completed =============\n\n"));

  SetFspApiReturnStatus(EFI_SUCCESS);

  SetFspMeasurePoint (FSP_PERF_ID_API_NOTIFY_RDYBOOT_EXIT);

  Pei2LoaderSwitchStack();

  //
  // Should not come here
  //
  while (TRUE) {
    DEBUG ((DEBUG_ERROR, "No FSP API should be called after FSP is DONE!\n"));
    SetFspApiReturnStatus(EFI_UNSUPPORTED);
    Pei2LoaderSwitchStack();
  }

  return EFI_SUCCESS;
}