path: root/MdePkg/Include/Protocol/Dhcp4.h

/** @file
  EFI_DHCP4_PROTOCOL as defined in UEFI 2.0.
  EFI_DHCP4_SERVICE_BINDING_PROTOCOL as defined in UEFI 2.0.
  These protocols are used to collect configuration information for the EFI IPv4 Protocol
  drivers and to provide DHCPv4 server and PXE boot server discovery services.

  Copyright (c) 2006 - 2008, Intel Corporation
  All rights reserved. This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef __EFI_DHCP4_PROTOCOL_H__
#define __EFI_DHCP4_PROTOCOL_H__

#define EFI_DHCP4_PROTOCOL_GUID \
  { \
    0x8a219718, 0x4ef5, 0x4761, {0x91, 0xc8, 0xc0, 0xf0, 0x4b, 0xda, 0x9e, 0x56 } \
  }

#define EFI_DHCP4_SERVICE_BINDING_PROTOCOL_GUID \
  { \
    0x9d9a39d8, 0xbd42, 0x4a73, {0xa4, 0xd5, 0x8e, 0xe9, 0x4b, 0xe1, 0x13, 0x80 } \
  }

typedef struct _EFI_DHCP4_PROTOCOL EFI_DHCP4_PROTOCOL;


#pragma pack(1)
typedef struct {
  UINT8               OpCode;
  UINT8               Length;
  UINT8               Data[1];
} EFI_DHCP4_PACKET_OPTION;
#pragma pack()


#pragma pack(1)
typedef struct {
    UINT8             OpCode;
    UINT8             HwType;
    UINT8             HwAddrLen;
    UINT8             Hops;
    UINT32            Xid;
    UINT16            Seconds;
    UINT16            Reserved;
    EFI_IPv4_ADDRESS  ClientAddr;       ///< Client IP address from client
    EFI_IPv4_ADDRESS  YourAddr;         ///< Client IP address from server
    EFI_IPv4_ADDRESS  ServerAddr;       ///< IP address of next server in bootstrap
    EFI_IPv4_ADDRESS  GatewayAddr;      ///< Relay agent IP address
    UINT8             ClientHwAddr[16]; ///< Client hardware address
    CHAR8             ServerName[64];
    CHAR8             BootFileName[128];
}EFI_DHCP4_HEADER;
#pragma pack()


#pragma pack(1)
typedef struct {
  UINT32              Size;
  UINT32              Length;

  struct {
    EFI_DHCP4_HEADER  Header;
    UINT32            Magik;
    UINT8             Option[1];
  } Dhcp4;
} EFI_DHCP4_PACKET;
#pragma pack()


typedef enum {
  Dhcp4Stopped        = 0x0,
  Dhcp4Init           = 0x1,
  Dhcp4Selecting      = 0x2,
  Dhcp4Requesting     = 0x3,
  Dhcp4Bound          = 0x4,
  Dhcp4Renewing       = 0x5,
  Dhcp4Rebinding      = 0x6,
  Dhcp4InitReboot     = 0x7,
  Dhcp4Rebooting      = 0x8
} EFI_DHCP4_STATE;


typedef enum{
  Dhcp4SendDiscover   = 0x01,
  Dhcp4RcvdOffer      = 0x02,
  Dhcp4SelectOffer    = 0x03,
  Dhcp4SendRequest    = 0x04,
  Dhcp4RcvdAck        = 0x05,
  Dhcp4RcvdNak        = 0x06,
  Dhcp4SendDecline    = 0x07,
  Dhcp4BoundCompleted = 0x08,
  Dhcp4EnterRenewing  = 0x09,
  Dhcp4EnterRebinding = 0x0a,
  Dhcp4AddressLost    = 0x0b,
  Dhcp4Fail           = 0x0c
} EFI_DHCP4_EVENT;

/**
  Callback routine

  @param  This                  Pointer to the EFI DHCPv4 Protocol instance that is used to
                                configure this callback function.
  @param  Context               Pointer to the context that is initialized by
                                EFI_DHCP4_PROTOCOL.Configure().
  @param  CurrentState          The current operational state of the EFI DHCPv4 Protocol
                                driver.
  @param  Dhcp4Event            The event that occurs in the current state, which usually means a
                                state transition.
  @param  Packet                The DHCP packet that is going to be sent or already received.
  @param  NewPacket             The packet that is used to replace the above Packet.

  @retval EFI_SUCCESS           Tells the EFI DHCPv4 Protocol driver to continue the DHCP process.
  @retval EFI_NOT_READY         Only used in the Dhcp4Selecting state. The EFI DHCPv4 Protocol
                                driver will continue to wait for more DHCPOFFER packets until the retry
                                timeout expires.
  @retval EFI_ABORTED           Tells the EFI DHCPv4 Protocol driver to abort the current process and
                                return to the Dhcp4Init or Dhcp4InitReboot state.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_CALLBACK)(
  IN  EFI_DHCP4_PROTOCOL         *This,
  IN  VOID                       *Context,
  IN  EFI_DHCP4_STATE            CurrentState,
  IN  EFI_DHCP4_EVENT            Dhcp4Event,
  IN  EFI_DHCP4_PACKET           *Packet     OPTIONAL,
  OUT EFI_DHCP4_PACKET           **NewPacket OPTIONAL
  );


typedef struct {
  UINT32                      DiscoverTryCount;
  UINT32                      *DiscoverTimeout;
  UINT32                      RequestTryCount;
  UINT32                      *RequestTimeout;
  EFI_IPv4_ADDRESS            ClientAddress;
  EFI_DHCP4_CALLBACK          Dhcp4Callback;
  void                        *CallbackContext;
  UINT32                      OptionCount;
  EFI_DHCP4_PACKET_OPTION     **OptionList;
} EFI_DHCP4_CONFIG_DATA;


typedef struct {
  EFI_DHCP4_STATE             State;
  EFI_DHCP4_CONFIG_DATA       ConfigData;
  EFI_IPv4_ADDRESS            ClientAddress;
  EFI_MAC_ADDRESS             ClientMacAddress;
  EFI_IPv4_ADDRESS            ServerAddress;
  EFI_IPv4_ADDRESS            RouterAddress;
  EFI_IPv4_ADDRESS            SubnetMask;
  UINT32                      LeaseTime;
  EFI_DHCP4_PACKET            *ReplyPacket;
} EFI_DHCP4_MODE_DATA;


typedef struct {
  EFI_IPv4_ADDRESS            ListenAddress;
  EFI_IPv4_ADDRESS            SubnetMask;
  UINT16                      ListenPort;
} EFI_DHCP4_LISTEN_POINT;


typedef struct {
  EFI_STATUS              Status;
  EFI_EVENT               CompletionEvent;
  EFI_IPv4_ADDRESS        RemoteAddress;
  UINT16                  RemotePort;
  EFI_IPv4_ADDRESS        GatewayAddress;
  UINT32                  ListenPointCount;
  EFI_DHCP4_LISTEN_POINT  *ListenPoints;
  UINT32                  TimeoutValue;
  EFI_DHCP4_PACKET        *Packet;
  UINT32                  ResponseCount;
  EFI_DHCP4_PACKET        *ResponseList;
} EFI_DHCP4_TRANSMIT_RECEIVE_TOKEN;


/**
  Returns the current operating mode and cached data packet for the EFI DHCPv4 Protocol driver.

  @param  This          Pointer to the EFI_DHCP4_PROTOCOL instance.
  @param  Dhcp4ModeData Pointer to storage for the EFI_DHCP4_MODE_DATA structure.

  @retval EFI_SUCCESS           The mode data was returned.
  @retval EFI_INVALID_PARAMETER This is NULL.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_GET_MODE_DATA)(
  IN  EFI_DHCP4_PROTOCOL      *This,
  OUT EFI_DHCP4_MODE_DATA     *Dhcp4ModeData
  );

/**
  Initializes, changes, or resets the operational settings for the EFI DHCPv4 Protocol driver.

  @param  This                   Pointer to the EFI_DHCP4_PROTOCOL instance.
  @param  Dhcp4CfgData           Pointer to the EFI_DHCP4_CONFIG_DATA.

  @retval EFI_SUCCESS           The EFI DHCPv4 Protocol driver is now in the Dhcp4Init or
                                Dhcp4InitReboot state, if the original state of this driver
                                was Dhcp4Stopped and the value of Dhcp4CfgData was
                                not NULL. Otherwise, the state was left unchanged.
  @retval EFI_ACCESS_DENIED     This instance of the EFI DHCPv4 Protocol driver was not in the
                                Dhcp4Stopped, Dhcp4Init, Dhcp4InitReboot, or Dhcp4Bound state;
                                Or onother instance of this EFI DHCPv4 Protocol driver is already
                                in a valid configured state.
  @retval EFI_INVALID_PARAMETER Some parameter is NULL.
  @retval EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
  @retval EFI_DEVICE_ERROR      An unexpected system or network error occurred.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_CONFIGURE)(
  IN EFI_DHCP4_PROTOCOL       *This,
  IN EFI_DHCP4_CONFIG_DATA    *Dhcp4CfgData  OPTIONAL
  );


/**
  Starts the DHCP configuration process.

  @param  This            Pointer to the EFI_DHCP4_PROTOCOL instance.
  @param  CompletionEvent If not NULL, indicates the event that will be signaled when the
                          EFI DHCPv4 Protocol driver is transferred into the
                          Dhcp4Bound state or when the DHCP process is aborted.
                          EFI_DHCP4_PROTOCOL.GetModeData() can be called to
                          check the completion status. If NULL,
                          EFI_DHCP4_PROTOCOL.Start() will wait until the driver
                          is transferred into the Dhcp4Bound state or the process fails.

  @retval EFI_SUCCESS           The DHCP configuration process has started, or it has completed
                                when CompletionEvent is NULL.
  @retval EFI_NOT_STARTED       The EFI DHCPv4 Protocol driver is in the Dhcp4Stopped
                                state. EFI_DHCP4_PROTOCOL. Configure() needs to be called.
  @retval EFI_INVALID_PARAMETER This is NULL.
  @retval EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
  @retval EFI_TIMEOUT           The DHCP configuration process failed because no response was
                                received from the server within the specified timeout value.
  @retval EFI_ABORTED           The user aborted the DHCP process.
  @retval EFI_ALREADY_STARTED   Some other EFI DHCPv4 Protocol instance already started the
                                DHCP process.
  @retval EFI_DEVICE_ERROR      An unexpected system or network error occurred.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_START)(
  IN EFI_DHCP4_PROTOCOL       *This,
  IN EFI_EVENT                CompletionEvent   OPTIONAL
  );

/**
  Extends the lease time by sending a request packet.

  @param  This            Pointer to the EFI_DHCP4_PROTOCOL instance.
  @param  RebindRequest   If TRUE, this function broadcasts the request packets and enters
                          the Dhcp4Rebinding state. Otherwise, it sends a unicast
                          request packet and enters the Dhcp4Renewing state.
  @param  CompletionEvent If not NULL, this event is signaled when the renew/rebind phase
                          completes or some error occurs.
                          EFI_DHCP4_PROTOCOL.GetModeData() can be called to
                          check the completion status. If NULL,
                          EFI_DHCP4_PROTOCOL.RenewRebind() will busy-wait
                          until the DHCP process finishes.

  @retval EFI_SUCCESS           The EFI DHCPv4 Protocol driver is now in the
                                Dhcp4Renewing state or is back to the Dhcp4Bound state.
  @retval EFI_NOT_STARTED       The EFI DHCPv4 Protocol driver is in the Dhcp4Stopped
                                state. EFI_DHCP4_PROTOCOL.Configure() needs to
                                be called.
  @retval EFI_INVALID_PARAMETER This is NULL.
  @retval EFI_TIMEOUT           There was no response from the server when the try count was
                                exceeded.
  @retval EFI_ACCESS_DENIED     The driver is not in the Dhcp4Bound state.
  @retval EFI_DEVICE_ERROR      An unexpected system or network error occurred.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_RENEW_REBIND)(
  IN EFI_DHCP4_PROTOCOL       *This,
  IN BOOLEAN                  RebindRequest,
  IN EFI_EVENT                CompletionEvent  OPTIONAL
  );

/**
  Releases the current address configuration.

  @param  This                  Pointer to the EFI_DHCP4_PROTOCOL instance.

  @retval EFI_SUCCESS           The EFI DHCPv4 Protocol driver is now in the Dhcp4Init phase.
  @retval EFI_INVALID_PARAMETER This is NULL.
  @retval EFI_ACCESS_DENIED     The EFI DHCPv4 Protocol driver is not Dhcp4InitReboot state.
  @retval EFI_DEVICE_ERROR      An unexpected system or network error occurred.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_RELEASE)(
  IN EFI_DHCP4_PROTOCOL       *This
  );

/**
  Stops the current address configuration.

  @param  This                  Pointer to the EFI_DHCP4_PROTOCOL instance.

  @retval EFI_SUCCESS           The EFI DHCPv4 Protocol driver is now in the Dhcp4Stopped phase.
  @retval EFI_INVALID_PARAMETER This is NULL.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_STOP)(
  IN EFI_DHCP4_PROTOCOL       *This
  );

/**
  Builds a DHCP packet, given the options to be appended or deleted or replaced.

  @param  This        Pointer to the EFI_DHCP4_PROTOCOL instance.
  @param  SeedPacket  Initial packet to be used as a base for building new packet.
  @param  DeleteCount Number of opcodes in the DeleteList.
  @param  DeleteList  List of opcodes to be deleted from the seed packet.
                      Ignored if DeleteCount is zero.
  @param  AppendCount Number of entries in the OptionList.
  @param  AppendList  Pointer to a DHCP option list to be appended to SeedPacket.
                      If SeedPacket also contains options in this list, they are
                      replaced by new options (except pad option). Ignored if
                      AppendCount is zero. Type EFI_DHCP4_PACKET_OPTION
  @param  NewPacket   Pointer to storage for the pointer to the new allocated packet.
                      Use the EFI Boot Service FreePool() on the resulting pointer
                      when done with the packet.

  @retval EFI_SUCCESS           The new packet was built.
  @retval EFI_OUT_OF_RESOURCES  Storage for the new packet could not be allocated.
  @retval EFI_INVALID_PARAMETER Some parameter is NULL.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_BUILD)(
  IN  EFI_DHCP4_PROTOCOL      *This,
  IN  EFI_DHCP4_PACKET        *SeedPacket,
  IN  UINT32                  DeleteCount,
  IN  UINT8                   *DeleteList         OPTIONAL,
  IN  UINT32                  AppendCount,
  IN  EFI_DHCP4_PACKET_OPTION *AppendList[]       OPTIONAL,
  OUT EFI_DHCP4_PACKET        **NewPacket
  );
/**
  Transmits a DHCP formatted packet and optionally waits for responses.

  @param  This    Pointer to the EFI_DHCP4_PROTOCOL instance.
  @param  Token   Pointer to the EFI_DHCP4_TRANSMIT_RECEIVE_TOKEN structure.

  @retval EFI_SUCCESS           The packet was successfully queued for transmission.
  @retval EFI_INVALID_PARAMETER Some parameter is NULL.
  @retval EFI_NOT_READY         The previous call to this function has not finished yet. Try to call
                                this function after collection process completes.
  @retval EFI_NO_MAPPING        The default station address is not available yet.
  @retval EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
  @retval Others                Some other unexpected error occurred.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_TRANSMIT_RECEIVE)(
  IN EFI_DHCP4_PROTOCOL                *This,
  IN EFI_DHCP4_TRANSMIT_RECEIVE_TOKEN  *Token
  );


/**
  Parses the packed DHCP option data.

  @param  This             Pointer to the EFI_DHCP4_PROTOCOL instance.
  @param  Packet           Pointer to packet to be parsed.
  @param  OptionCount      On input, the number of entries in the PacketOptionList.
                           On output, the number of entries that were written into the
                           PacketOptionList.
  @param  PacketOptionList List of packet option entries to be filled in. End option or pad
                           options are not included.

  @retval EFI_SUCCESS           The packet was successfully parsed.
  @retval EFI_INVALID_PARAMETER Some parameter is NULL.
  @retval EFI_BUFFER_TOO_SMALL  One or more of the following conditions is TRUE:
                                1) *OptionCount is smaller than the number of options that
                                were found in the Packet.
                                2) PacketOptionList is NULL.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_DHCP4_PARSE)(
  IN EFI_DHCP4_PROTOCOL        *This,
  IN EFI_DHCP4_PACKET          *Packet,
  IN OUT UINT32                *OptionCount,
  OUT EFI_DHCP4_PACKET_OPTION  *PacketOptionList[]  OPTIONAL
  );

/**
  @par Protocol Description:
  This protocol is used to collect configuration information for the EFI IPv4 Protocol drivers
  and to provide DHCPv4 server and PXE boot server discovery services.
**/
struct _EFI_DHCP4_PROTOCOL {
  EFI_DHCP4_GET_MODE_DATA      GetModeData;
  EFI_DHCP4_CONFIGURE          Configure;
  EFI_DHCP4_START              Start;
  EFI_DHCP4_RENEW_REBIND       RenewRebind;
  EFI_DHCP4_RELEASE            Release;
  EFI_DHCP4_STOP               Stop;
  EFI_DHCP4_BUILD              Build;
  EFI_DHCP4_TRANSMIT_RECEIVE   TransmitReceive;
  EFI_DHCP4_PARSE              Parse;
};

extern EFI_GUID gEfiDhcp4ProtocolGuid;
extern EFI_GUID gEfiDhcp4ServiceBindingProtocolGuid;

#endif