path: root/MdePkg/Library/UefiLib/UefiNotTiano.c

/** @file
  Library functions that abstract areas of conflict between Tiano an UEFI 2.0.

  Help Port Framework/Tinao code that has conflicts with UEFI 2.0 by hiding the
  oldconflicts with library functions and supporting implementations of the old 
  (R8.5/EFI 1.10) and new (R9/UEFI 2.0) way.

Copyright (c) 2006, Intel Corporation<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/



/**
  Create a Legacy Boot Event.  
  
  Tiano extended the CreateEvent Type enum to add a legacy boot event type. 
  This was bad as Tiano did not own the enum. In UEFI 2.0 CreateEventEx was
  added and now it's possible to not voilate the UEFI specification by 
  declaring a GUID for the legacy boot event class. This library supports
  the R8.5/EFI 1.10 form and R9/UEFI 2.0 form and allows common code to 
  work both ways.

  @param  LegacyBootEvent   Returns the EFI event returned from gBS->CreateEvent(Ex).

  @retval EFI_SUCCESS       Event was created.
  @retval Other             Event was not created.

**/
EFI_STATUS
EFIAPI
EfiCreateEventLegacyBoot (
  OUT  EFI_EVENT   *LegacyBootEvent
  )
{
  EFI_STATUS    Status;

  ASSERT (LegacyBootEvent != NULL);

#if (EFI_SPECIFICATION_VERSION < 0x00020000) 
  //
  // prior to UEFI 2.0 use Tiano extension to EFI
  //
  Status = gBS->CreateEvent (
                  EFI_EVENT_SIGNAL_LEGACY_BOOT | EFI_EVENT_NOTIFY_SIGNAL_ALL,
                  EFI_TPL_CALLBACK,
                  NULL,
                  NULL,
                  LegacyBootEvent
                  );
#else
  //
  // For UEFI 2.0 and the future use an Event Group
  //
  Status = gBS->CreateEventEx (
                  EVENT_NOTIFY_SIGNAL,
                  EFI_TPL_CALLBACK,
                  NULL,
                  NULL,
                  &gEfiEventLegacyBootGuid,
                  LegacyBootEvent
                  );
#endif
  return Status;
}



/**
  Create a Read to Boot Event.  
  
  Tiano extended the CreateEvent Type enum to add a ready to boot event type. 
  This was bad as Tiano did not own the enum. In UEFI 2.0 CreateEventEx was
  added and now it's possible to not voilate the UEFI specification and use 
  the ready to boot event class defined in UEFI 2.0. This library supports
  the R8.5/EFI 1.10 form and R9/UEFI 2.0 form and allows common code to 
  work both ways.

  @param  LegacyBootEvent   Returns the EFI event returned from gBS->CreateEvent(Ex).

  @retval EFI_SUCCESS       Event was created.
  @retval Other             Event was not created.

**/
EFI_STATUS
EFIAPI
EfiCreateEventReadyToBoot (
  IN  EFI_EVENT   *ReadyToBootEvent
  )
{
  EFI_STATUS    Status;

  ASSERT (ReadyToBootEvent != NULL);

#if (EFI_SPECIFICATION_VERSION < 0x00020000) 
  //
  // prior to UEFI 2.0 use Tiano extension to EFI
  //
  Status = gBS->CreateEvent (
                  EFI_EVENT_SIGNAL_READY_TO_BOOT | EFI_EVENT_NOTIFY_SIGNAL_ALL,
                  EFI_TPL_CALLBACK,
                  NULL,
                  NULL,
                  ReadyToBootEvent
                  );
#else
  //
  // For UEFI 2.0 and the future use an Event Group
  //
  Status = gBS->CreateEventEx (
                  EVENT_NOTIFY_SIGNAL,
                  EFI_TPL_CALLBACK,
                  NULL,
                  NULL,
                  &gEfiEventReadyToBootGuid,
                  ReadyToBootEvent
                  );
#endif

  return Status;
}


/**
  Signal a Ready to Boot Event.  
  
  Create a Ready to Boot Event. Signal it and close it. This causes other 
  events of the same event group to be signaled in other modules. 

**/
VOID
EFIAPI
EfiSignalEventReadyToBoot (
  VOID
  )
{
  EFI_STATUS    Status;
  EFI_EVENT     ReadyToBootEvent;

  Status = EfiCreateEventReadyToBoot (&ReadyToBootEvent);
  if (!EFI_ERROR (Status)) {
    gBS->SignalEvent (ReadyToBootEvent);
    gBS->CloseEvent (ReadyToBootEvent);
  }
}

/**
  Signal a Legacy Boot Event.  
  
  Create a legacy Boot Event. Signal it and close it. This causes other 
  events of the same event group to be signaled in other modules. 

**/
VOID
EFIAPI
EfiSignalEventLegacyBoot (
  VOID
  )
{
  EFI_STATUS    Status;
  EFI_EVENT     LegacyBootEvent;

  Status = EfiCreateEventLegacyBoot (&LegacyBootEvent);
  if (!EFI_ERROR (Status)) {
    gBS->SignalEvent (LegacyBootEvent);
    gBS->CloseEvent (LegacyBootEvent);
  }
}


/**
  Check to see if the Firmware Volume (FV) Media Device Path is valid 
  
  Tiano extended the EFI 1.10 device path nodes. Tiano does not own this enum
  so as we move to UEFI 2.0 support we must use a mechanism that conforms with
  the UEFI 2.0 specification to define the FV device path. An UEFI GUIDed 
  device path is defined for PIWG extensions of device path. If the code 
  is compiled to conform with the UEFI 2.0 specification use the new device path
  else use the old form for backwards compatability. The return value to this
  function points to a location in FvDevicePathNode and it does not allocate
  new memory for the GUID pointer that is returned.

  @param  FvDevicePathNode  Pointer to FV device path to check.

  @retval NULL              FvDevicePathNode is not valid.
  @retval Other             FvDevicePathNode is valid and pointer to NameGuid was returned.

**/
EFI_GUID *
EFIAPI
EfiGetNameGuidFromFwVolDevicePathNode (
  IN  MEDIA_FW_VOL_FILEPATH_DEVICE_PATH   *FvDevicePathNode
  )
{
  ASSERT (FvDevicePathNode != NULL);

#if (EFI_SPECIFICATION_VERSION < 0x00020000) 
  //
  // Use old Device Path that conflicts with UEFI
  //
  if (DevicePathType (&FvDevicePathNode->Header) == MEDIA_DEVICE_PATH ||
      DevicePathSubType (&FvDevicePathNode->Header) == MEDIA_FV_FILEPATH_DP) {
    return &FvDevicePathNode->NameGuid;
  }

#else
  //
  // Use the new Device path that does not conflict with the UEFI
  //
  if (FvDevicePathNode->Piwg.Header.Type == MEDIA_DEVICE_PATH ||
      FvDevicePathNode->Piwg.Header.SubType == MEDIA_VENDOR_DP) {
    if (CompareGuid (&gEfiFrameworkDevicePathGuid, &FvDevicePathNode->Piwg.PiwgSpecificDevicePath)) {
      if (FvDevicePathNode->Piwg.Type == PIWG_MEDIA_FW_VOL_FILEPATH_DEVICE_PATH_TYPE) {
        return &FvDevicePathNode->NameGuid;
      }
    }
  }
#endif  
  return NULL;
}


/**
  Initialize a Firmware Volume (FV) Media Device Path node.
  
  Tiano extended the EFI 1.10 device path nodes. Tiano does not own this enum
  so as we move to UEFI 2.0 support we must use a mechanism that conforms with
  the UEFI 2.0 specification to define the FV device path. An UEFI GUIDed 
  device path is defined for PIWG extensions of device path. If the code 
  is compiled to conform with the UEFI 2.0 specification use the new device path
  else use the old form for backwards compatability.

  @param FvDevicePathNode   Pointer to a FV device path node to initialize
  @param NameGuid           FV file name to use in FvDevicePathNode

**/
VOID
EFIAPI
EfiInitializeFwVolDevicepathNode (
  IN  MEDIA_FW_VOL_FILEPATH_DEVICE_PATH     *FvDevicePathNode,
  IN EFI_GUID                               *NameGuid
  )
{
  ASSERT (FvDevicePathNode  != NULL);
  ASSERT (NameGuid          != NULL);

#if (EFI_SPECIFICATION_VERSION < 0x00020000) 
  //
  // Use old Device Path that conflicts with UEFI
  //
  FvDevicePathNode->Header.Type     = MEDIA_DEVICE_PATH;
  FvDevicePathNode->Header.SubType  = MEDIA_FV_FILEPATH_DP;
  SetDevicePathNodeLength (&FvDevicePathNode->Header, sizeof (MEDIA_FW_VOL_FILEPATH_DEVICE_PATH));
  
#else
  //
  // Use the new Device path that does not conflict with the UEFI
  //
  FvDevicePathNode->Piwg.Header.Type     = MEDIA_DEVICE_PATH;
  FvDevicePathNode->Piwg.Header.SubType  = MEDIA_VENDOR_DP;
  SetDevicePathNodeLength (&FvDevicePathNode->Piwg.Header, sizeof (MEDIA_FW_VOL_FILEPATH_DEVICE_PATH));

  //
  // Add the GUID for generic PIWG device paths
  //
  CopyGuid (&FvDevicePathNode->Piwg.PiwgSpecificDevicePath, &gEfiFrameworkDevicePathGuid);

  //
  // Add in the FW Vol File Path PIWG defined inforation
  //
  FvDevicePathNode->Piwg.Type = PIWG_MEDIA_FW_VOL_FILEPATH_DEVICE_PATH_TYPE;

#endif

  CopyGuid (&FvDevicePathNode->NameGuid, NameGuid);

}