path: root/OldMdePkg/Include/Library/PalCallLib.h

/** @file
  PAL Call Services

  Copyright (c) 2006 -2007, Intel Corporation All rights
  reserved. This program and the accompanying materials are
  licensed and made available under the terms and conditions of
  the BSD License which accompanies this distribution.  The full
  text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

  Module Name:  PalCallLib.h

**/

#ifndef __PAL_CALL_LIB_H__
#define __PAL_CALL_LIB_H__

#define PAL_SUCCESS             0x0

//
// CacheType of PAL_CACHE_FLUSH.
//
#define PAL_CACHE_FLUSH_INSTRUCTION_ALL   1
#define PAL_CACHE_FLUSH_DATA_ALL          2
#define PAL_CACHE_FLUSH_ALL               3
#define PAL_CACHE_FLUSH_SYNC_TO_DATA      4


//
// Bitmask of Opearation of PAL_CACHE_FLUSH.
// 
#define PAL_CACHE_FLUSH_INVALIDATE_LINES     BIT0
#define PAL_CACHE_FLUSH_NO_INVALIDATE_LINES  0
#define PAL_CACHE_FLUSH_POLL_INTERRUPT       BIT1
#define PAL_CACHE_FLUSH_NO_INTERRUPT       0

/**
  
  PAL Procedure - PAL_CACHE_FLUSH.
  
  Flush the instruction or data caches. It is required by IPF.
  The PAL procedure supports the Static Registers calling
  convention. It could be called at virtual mode and physical
  mode.

  @param Index              Index of PAL_CACHE_FLUSH within the
                            list of PAL procedures.
  
  @param CacheType          Unsigned 64-bit integer indicating
                            which cache to flush.

  @param Operation          Formatted bit vector indicating the
                            operation of this call.

  @param ProgressIndicator  Unsigned 64-bit integer specifying
                            the starting position of the flush
                            operation.
  
  @return R9      Unsigned 64-bit integer specifying the vector
                  number of the pending interrupt.
  
  @return R10     Unsigned 64-bit integer specifying the
                  starting position of the flush operation.
  
  @return R11     Unsigned 64-bit integer specifying the vector
                  number of the pending interrupt.
  
  @return Status  2 - Call completed without error, but a PMI
                  was taken during the execution of this
                  procedure.

  @return Status  1 - Call has not completed flushing due to
                  a pending interrupt.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error
   
**/
#define PAL_CACHE_FLUSH   1


//
// Attributes of PAL_CACHE_CONFIG_INFO1
// 
#define PAL_CACHE_ATTR_WT   0
#define PAL_CACHE_ATTR_WB   1

//
// PAL_CACHE_CONFIG_INFO1.StoreHint
// 
#define PAL_CACHE_STORE_TEMPORAL      0
#define PAL_CACHE_STORE_NONE_TEMPORAL 3

//
// PAL_CACHE_CONFIG_INFO1.StoreHint
// 
#define PAL_CACHE_STORE_TEMPORAL_LVL_1        0
#define PAL_CACHE_STORE_NONE_TEMPORAL_LVL_ALL 3

//
// PAL_CACHE_CONFIG_INFO1.StoreHint
// 
#define PAL_CACHE_LOAD_TEMPORAL_LVL_1         0
#define PAL_CACHE_LOAD_NONE_TEMPORAL_LVL_1    1
#define PAL_CACHE_LOAD_NONE_TEMPORAL_LVL_ALL  3

//
// Detail the characteristics of a given processor controlled
// cache in the cache hierarchy.
// 
typedef struct {
  UINT64  IsUnified   : 1;
  UINT64  Attributes  : 2;
  UINT64  Associativity:8;
  UINT64  LineSize:8;
  UINT64  Stride:8;
  UINT64  StoreLatency:8;
  UINT64  StoreHint:8;
  UINT64  LoadHint:8;
} PAL_CACHE_INFO_RETURN1;

//
// Detail the characteristics of a given processor controlled
// cache in the cache hierarchy.
// 
typedef struct {
  UINT64  CacheSize:32;
  UINT64  AliasBoundary:8;
  UINT64  TagLsBits:8;
  UINT64  TagMsBits:8;
} PAL_CACHE_INFO_RETURN2;

/**
  
  PAL Procedure - PAL_CACHE_INFO.
   
  Return detailed instruction or data cache information. It is
  required by IPF. The PAL procedure supports the Static
  Registers calling convention. It could be called at virtual
  mode and physical mode.
  
  @param Index        Index of PAL_CACHE_INFO within the list of
                      PAL procedures.
  
  @param CacheLevel   Unsigned 64-bit integer specifying the
                      level in the cache hierarchy for which
                      information is requested. This value must
                      be between 0 and one less than the value
                      returned in the cache_levels return value
                      from PAL_CACHE_SUMMARY.
  
  @param CacheType    Unsigned 64-bit integer with a value of 1
                      for instruction cache and 2 for data or
                      unified cache. All other values are
                      reserved.
  
  @param Reserved     Should be 0.
  
  
  @return R9      Detail the characteristics of a given
                  processor controlled cache in the cache
                  hierarchy. See PAL_CACHE_INFO_RETURN1.
  
  @return R10     Detail the characteristics of a given
                  processor controlled cache in the cache
                  hierarchy. See PAL_CACHE_INFO_RETURN2.
  
  @return R11     Reserved with 0.
  
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error
   
**/
#define PAL_CACHE_INFO    2



//
// Level of PAL_CACHE_INIT.
// 
#define PAL_CACHE_INIT_ALL  0xffffffffffffffffULL

//
// CacheType 
//
#define PAL_CACHE_INIT_TYPE_INSTRUCTION                 0x1
#define PAL_CACHE_INIT_TYPE_DATA                        0x2
#define PAL_CACHE_INIT_TYPE_INSTRUCTION_AND_DATA        0x3

//
// Restrict of PAL_CACHE_INIT.
// 
#define PAL_CACHE_INIT_NO_RESTRICT  0
#define PAL_CACHE_INIT_RESTRICTED   1

/**
  
  PAL Procedure - PAL_CACHE_INIT.
  
  Initialize the instruction or data caches. It is required by
  IPF. The PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode.

  @param Index  Index of PAL_CACHE_INIT within the list of PAL
                procedures.
  
  @param Level  Unsigned 64-bit integer containing the level of
                cache to initialize. If the cache level can be
                initialized independently, only that level will
                be initialized. Otherwise
                implementation-dependent side-effects will
                occur.
  
  @param CacheType  Unsigned 64-bit integer with a value of 1 to
                    initialize the instruction cache, 2 to
                    initialize the data cache, or 3 to
                    initialize both. All other values are
                    reserved.

  @param Restrict   Unsigned 64-bit integer with a value of 0 or
                    1. All other values are reserved. If
                    restrict is 1 and initializing the specified
                    level and cache_type of the cache would
                    cause side-effects, PAL_CACHE_INIT will
                    return -4 instead of initializing the cache.
 
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
  
  @return Status  -4 - Call could not initialize the specified
                  level and cache_type of the cache without
                  side-effects and restrict was 1.  
   
**/
#define PAL_CACHE_INIT    3 


//
// PAL_CACHE_PROTECTION.Method.
// 
#define PAL_CACHE_PROTECTION_NONE_PROTECT   0
#define PAL_CACHE_PROTECTION_ODD_PROTECT    1
#define PAL_CACHE_PROTECTION_EVEN_PROTECT   2
#define PAL_CACHE_PROTECTION_ECC_PROTECT    3



//
// PAL_CACHE_PROTECTION.TagOrData.
// 
#define PAL_CACHE_PROTECTION_PROTECT_DATA   0
#define PAL_CACHE_PROTECTION_PROTECT_TAG    1
#define PAL_CACHE_PROTECTION_PROTECT_TAG_ANDTHEN_DATA   2
#define PAL_CACHE_PROTECTION_PROTECT_DATA_ANDTHEN_TAG   3

//
// 32-bit protection information structures.
// 
typedef struct {
  UINT32  DataBits:8;
  UINT32  TagProtLsb:6;
  UINT32  TagProtMsb:6;
  UINT32  ProtBits:6;
  UINT32  Method:4;
  UINT32  TagOrData:2;
} PAL_CACHE_PROTECTION;

/**
  
  PAL Procedure - PAL_CACHE_PROT_INFO.
  
  Return instruction or data cache protection information. It is
  required by IPF. The PAL procedure supports the Static
  Registers calling convention. It could be called at physical
  mode and Virtual mode.

  @param Index  Index of PAL_CACHE_PROT_INFO within the list of
                PAL procedures.

  @param CacheLevel Unsigned 64-bit integer specifying the level
                    in the cache hierarchy for which information
                    is requested. This value must be between 0
                    and one less than the value returned in the
                    cache_levels return value from
                    PAL_CACHE_SUMMARY.

  @param CacheType  Unsigned 64-bit integer with a value of 1
                    for instruction cache and 2 for data or
                    unified cache. All other values are
                    reserved.
  
  @return R9      Detail the characteristics of a given
                  processor controlled cache in the cache
                  hierarchy. See PAL_CACHE_PROTECTION[0..1].
  
  @return R10     Detail the characteristics of a given
                  processor controlled cache in the cache
                  hierarchy. See PAL_CACHE_PROTECTION[2..3].
  
  @return R11     Detail the characteristics of a given
                  processor controlled cache in the cache
                  hierarchy. See PAL_CACHE_PROTECTION[4..5].
  
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_CACHE_PROT_INFO     38

/**
   
  @param  ThreadId  The thread identifier of the logical
                    processor for which information is being
                    returned. This value will be unique on a per
                    core basis.

  @param  CoreId    The core identifier of the logical processor
                    for which information is being returned.
                    This value will be unique on a per physical
                    processor package basis.

**/
typedef struct {
  UINT64  ThreadId : 16;
  UINT64  Reserved1: 16;
  UINT64  CoreId: 16;
  UINT64  Reserved2: 16;
} PAL_PCOC_N_CACHE_INFO1;

/**
   
  @param LogicalAddress   Logical address: geographical address
                          of the logical processor for which
                          information is being returned. This is
                          the same value that is returned by the
                          PAL_FIXED_ADDR procedure when it is
                          called on the logical processor.

**/
typedef struct {
  UINT64  LogicalAddress : 16;
  UINT64  Reserved1: 16;
  UINT64  Reserved2: 32;
} PAL_PCOC_N_CACHE_INFO2;

/**
  
  PAL Procedure - PAL_CACHE_SHARED_INFO.
   
  Returns information on which logical processors share caches.
  It is optional. The PAL procedure supports the Static
  Registers calling convention. It could be called at physical
  mode and Virtual mode.
  
  @param Index  Index of PAL_CACHE_SHARED_INFO within the list
                of PAL procedures.
  
  @param CacheLevel   Unsigned 64-bit integer specifying the
                      level in the cache hierarchy for which
                      information is requested. This value must
                      be between 0 and one less than the value
                      returned in the cache_levels return value
                      from PAL_CACHE_SUMMARY.
  
  @param CacheType  Unsigned 64-bit integer with a value of 1
                    for instruction cache and 2 for data or
                    unified cache. All other values are
                    reserved.
  
  @param ProcNumber   Unsigned 64-bit integer that specifies for
                      which logical processor information is
                      being requested. This input argument must
                      be zero for the first call to this
                      procedure and can be a maximum value of
                      one less than the number of logical
                      processors sharing this cache, which is
                      returned by the num_shared return value.
  
  @return R9    Unsigned integer that returns the number of
                logical processors that share the processor
                cache level and type, for which information was
                requested.

  @return R10   The format of PAL_PCOC_N_CACHE_INFO1.

  @return R11   The format of PAL_PCOC_N_CACHE_INFO2.

  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_CACHE_SHARED_INFO   43


/**
  
  PAL Procedure - PAL_CACHE_SUMMARY.
  
  Return a summary of the cache hierarchy. It is required by
  IPF. The PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode and Virtual
  mode.
  
  @param Index  Index of PAL_CACHE_SUMMARY within the list of
                PAL procedures.

  
  @return R9  CacheLevels   Unsigned 64-bit integer denoting the
                            number of levels of cache
                            implemented by the processor.
                            Strictly, this is the number of
                            levels for which the cache
                            controller is integrated into the
                            processor (the cache SRAMs may be
                            external to the processor).

  @return R10 UniqueCaches  Unsigned 64-bit integer denoting the
                            number of unique caches implemented
                            by the processor. This has a maximum
                            of 2*cache_levels, but may be less
                            if any of the levels in the cache
                            hierarchy are unified caches or do
                            not have both instruction and data
                            caches.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_CACHE_SUMMARY   4


//
// Virtual Memory Attributes implemented by processor. 
// 
#define PAL_MEMORY_ATTR_WB      0
#define PAL_MEMORY_ATTR_WC      6
#define PAL_MEMORY_ATTR_UC      4
#define PAL_MEMORY_ATTR_UCE     5
#define PAL_MEMORY_ATTR_NATPAGE 7

/**
  
  PAL Procedure - PAL_MEM_ATTRIB.
  
  Return a list of supported memory attributes.. It is required
  by IPF. The PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode and Virtual
  mode.
  
  @param Index  Index of PAL_MEM_ATTRIB within the list of PAL
                procedures.

  
  @return R9  Attributes  8-bit vector of memory attributes
                          implemented by processor. See Virtual
                          Memory Attributes above.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/

#define PAL_MEM_ATTRIB      5

/**
  
  PAL Procedure - PAL_PREFETCH_VISIBILITY.
  
  Used in architected sequence to transition pages from a
  cacheable, speculative attribute to an uncacheable attribute.
  It is required by IPF. The PAL procedure supports the Static
  Registers calling convention. It could be called at physical
  mode and Virtual mode.
  
  @param Index  Index of PAL_PREFETCH_VISIBILITY within the list
                of PAL procedures.

  @param TransitionType   Unsigned integer specifying the type
                          of memory attribute transition that is
                          being performed.
  
  @return Status  1       Call completed without error; this
                          call is not necessary on remote
                          processors.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_PREFETCH_VISIBILITY   41

/**
  
  PAL Procedure - PAL_PTCE_INFO.
  
  Return information needed for ptc.e instruction to purge
  entire TC. It is required by IPF. The PAL procedure supports
  the Static Registers calling convention. It could be called at
  physical mode and Virtual mode.
  
  @param Index  Index of PAL_PTCE_INFO within the list
                of PAL procedures.

  @return R9  Unsigned 64-bit integer denoting the beginning
              address to be used by the first PTCE instruction
              in the purge loop.
  
  @return R10 Two unsigned 32-bit integers denoting the loop
              counts of the outer (loop 1) and inner (loop 2)
              purge loops. count1 (loop 1) is contained in bits
              63:32 of the parameter, and count2 (loop 2) is
              contained in bits 31:0 of the parameter.
  
  @return R11 Two unsigned 32-bit integers denoting the loop
              strides of the outer (loop 1) and inner (loop 2)
              purge loops. stride1 (loop 1) is contained in bits
              63:32 of the parameter, and stride2 (loop 2) is
              contained in bits 31:0 of the parameter.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_PTCE_INFO     6



/**
   
  @param NumberSets   Unsigned 8-bit integer denoting the number
                      of hash sets for the specified level
                      (1=fully associative)

  @param NumberWays   Unsigned 8-bit integer denoting the
                      associativity of the specified level
                      (1=direct).

  @param NumberEntries  Unsigned 16-bit integer denoting the
                        number of entries in the specified TC.


  @param PageSizeIsOptimized  Flag denoting whether the
                              specified level is optimized for
                              the region's preferred page size
                              (1=optimized) tc_pages indicates
                              which page sizes are usable by
                              this translation cache.

  @param TcIsUnified  Flag denoting whether the specified TC is
                      unified (1=unified).

  @param EntriesReduction   Flag denoting whether installed
                            translation registers will reduce
                            the number of entries within the
                            specified TC.

**/
typedef struct {
  UINT64  NumberSets:8;
  UINT64  NumberWays:8;
  UINT64  NumberEntries:16;
  UINT64  PageSizeIsOptimized:1;
  UINT64  TcIsUnified:1;
  UINT64  EntriesReduction:1;
} PAL_TC_INFO;

/**
  
  PAL Procedure - PAL_VM_INFO.
  
  Return detailed information about virtual memory features
  supported in the processor. It is required by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode and Virtual mode.
  
  @param Index  Index of PAL_VM_INFO within the list
                of PAL procedures.
  
  @param TcLevel  Unsigned 64-bit integer specifying the level
                  in the TLB hierarchy for which information is
                  required. This value must be between 0 and one
                  less than the value returned in the
                  vm_info_1.num_tc_levels return value from
                  PAL_VM_SUMMARY.
  
  @param TcType   Unsigned 64-bit integer with a value of 1 for
                  instruction translation cache and 2 for data
                  or unified translation cache. All other values
                  are reserved.

  @return R9      8-byte formatted value returning information
                  about the specified TC. See PAL_TC_INFO above.

  @return R10     64-bit vector containing a bit for each page
                  size supported in the specified TC, where bit
                  position n indicates a page size of 2**n.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_VM_INFO       7


/**
  
  PAL Procedure - PAL_VM_PAGE_SIZE.
  
  Return virtual memory TC and hardware walker page sizes
  supported in the processor. It is required by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode and Virtual mode.
  
  @param Index  Index of PAL_VM_PAGE_SIZE within the list
                of PAL procedures.
  

  @return R9      64-bit vector containing a bit for each
                  architected page size that is supported for
                  TLB insertions and region registers.

  @return R10     64-bit vector containing a bit for each
                  architected page size supported for TLB purge
                  operations.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_VM_PAGE_SIZE 34

/**
   
  @param WalkerPresent  1-bit flag indicating whether a hardware
                        TLB walker is implemented (1 = walker
                        present).

  @param WidthOfPhysicalAddress   Unsigned 7-bit integer
                                  denoting the number of bits of
                                  physical address implemented.

  @param WidthOfKey   Unsigned 8-bit integer denoting the number
                      of bits mplemented in the PKR.key field.

  @param MaxPkrIndex  Unsigned 8-bit integer denoting the
                      maximum PKR index (number of PKRs-1).

  @param HashTagId    Unsigned 8-bit integer which uniquely
                      identifies the processor hash and tag
                      algorithm.

  @param MaxDtrIndex  Unsigned 8 bit integer denoting the
                      maximum data translation register index
                      (number of dtr entries - 1).

  @param MaxItrIndex  Unsigned 8 bit integer denoting the
                      maximum instruction translation register
                      index (number of itr entries - 1).

  @param NumberOfUniqueTc   Unsigned 8-bit integer denoting the
                            number of unique TCs implemented.
                            This is a maximum of
                            2*num_tc_levels.

  @param NumberOfTcLevels   Unsigned 8-bit integer denoting the
                            number of TC levels.

**/
typedef struct {
  UINT64  WalkerPresent:1;
  UINT64  WidthOfPhysicalAddress: 7;
  UINT64  WidthOfKey:8;
  UINT64  MaxPkrIndex:8;
  UINT64  HashTagId:8;
  UINT64  MaxDtrIndex:8;
  UINT64  MaxItrIndex:8;
  UINT64  NumberOfUniqueTc:8;
  UINT64  NumberOfTcLevels:8;
} PAL_VM_INFO1;

/**
   
  @param WidthOfVirtualAddress  Unsigned 8-bit integer denoting
                                is the total number of virtual
                                address bits - 1.

  @param WidthOfRid   Unsigned 8-bit integer denoting the number
                      of bits implemented in the RR.rid field.

  @param MaxPurgedTlbs  Unsigned 16 bit integer denoting the
                        maximum number of concurrent outstanding
                        TLB purges allowed by the processor. A
                        value of 0 indicates one outstanding
                        purge allowed. A value of 216-1
                        indicates no limit on outstanding
                        purges. All other values indicate the
                        actual number of concurrent outstanding
                        purges allowed.

**/
typedef struct {
  UINT64  WidthOfVirtualAddress:8;
  UINT64  WidthOfRid:8;
  UINT64  MaxPurgedTlbs:16;
  UINT64  Reserved:32;
} PAL_VM_INFO2;

/**
  
  PAL Procedure - PAL_VM_SUMMARY.
  
  Return summary information about virtual memory features
  supported in the processor. It is required by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode and Virtual mode.
  
  @param Index  Index of PAL_VM_SUMMARY within the list
                of PAL procedures.
  

  @return R9    8-byte formatted value returning global virtual
                memory information. See PAL_VM_INFO1 above.

  @return R10   8-byte formatted value returning global virtual
                memory information. See PAL_VM_INFO2 above.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_VM_SUMMARY  8


//
// Bit mask of TR_valid flag.
// 
#define PAL_TR_ACCESS_RIGHT_IS_VALID      BIT0
#define PAL_TR_PRIVILEGE_LEVEL_IS_VALID   BIT1
#define PAL_TR_DIRTY_IS_VALID             BIT2
#define PAL_TR_MEMORY_ATTR_IS_VALID       BIT3


/**
  
  PAL Procedure - PAL_VM_TR_READ.
  
  Read contents of a translation register. It is required by
  IPF. The PAL procedure supports the Stacked Register calling
  convention. It could be called at physical mode.
  
  @param Index  Index of PAL_VM_TR_READ within the list
                of PAL procedures.

  @param RegNumber  Unsigned 64-bit number denoting which TR to
                    read.

  @param TrType   Unsigned 64-bit number denoting whether to
                  read an ITR (0) or DTR (1). All other values
                  are reserved.

  @param TrBuffer 64-bit pointer to the 32-byte memory buffer in
                  which translation data is returned.

  @return R9    Formatted bit vector denoting which fields are
                valid. See TR_valid above.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_VM_TR_READ  261 




//
// Bit Mask of Processor Bus Fesatures .
// 

/**
   
  When 0, bus data errors are detected and single bit errors are
  corrected. When 1, no error detection or correction is done.

**/
#define PAL_BUS_DISABLE_DATA_ERROR_SIGNALLING   BIT63


/**
   
  When 0, bus address errors are signalled on the bus. When 1,
  no bus errors are signalled on the bus. If Disable Bus Address
  Error Checking is 1, this bit is ignored.

**/
#define PAL_BUS_DISABLE_ADDRESS_ERROR_SIGNALLING   BIT62




/**
   
  When 0, bus errors are detected, single bit errors are
  corrected., and a CMCI or MCA is generated internally to the
  processor. When 1, no bus address errors are detected or
  corrected.

**/
#define PAL_BUS_DISABLE_ADDRESS_ERROR_CHECK   BIT61


/**
   
  When 0, bus protocol errors (BINIT#) are signaled by the
  processor on the bus. When 1, bus protocol errors (BINIT#) are
  not signaled on the bus. If Disable Bus Initialization Event
  Checking is 1, this bit is ignored.

**/
#define PAL_BUS_DISABLE_INITIALIZATION_EVENT_SIGNALLING   BIT60


/**
   
  When 0, bus protocol errors (BINIT#) are detected and sampled
  and an MCA is generated internally to the processor. When 1,
  the processor will ignore bus protocol error conditions
  (BINIT#).

**/
#define PAL_BUS_DISABLE_INITIALIZATION_EVENT_CHECK   BIT59



/**
   
  When 0, BERR# is signalled if a bus error is detected. When 1,
  bus errors are not signalled on the bus.

**/
#define PAL_BUS_DISABLE_ERROR_SIGNALLING   BIT58




/**
   
  When 0, BERR# is signalled when internal processor requestor
  initiated bus errors are detected. When 1, internal requester
  bus errors are not signalled on the bus.
  
**/
#define PAL_BUS_DISABLE__INTERNAL_ERROR_SIGNALLING   BIT57


/**
   
  When 0, the processor takes an MCA if BERR# is asserted. When
  1, the processor ignores the BERR# signal.

**/
#define PAL_BUS_DISABLE_ERROR_CHECK   BIT56


/**
   
  When 0, the processor asserts BINIT# if it detects a parity
  error on the signals which identify the transactions to which
  this is a response. When 1, the processor ignores parity on
  these signals.
  
**/
#define PAL_BUS_DISABLE_RSP_ERROR_CHECK   BIT55


/**
   
  When 0, the in-order transaction queue is limited only by the
  number of hardware entries. When 1, the processor's in-order
  transactions queue is limited to one entry.

**/
#define PAL_BUS_DISABLE_TRANSACTION_QUEUE   BIT54

/**
   
  Enable a bus cache line replacement transaction when a cache
  line in the exclusive state is replaced from the highest level
  processor cache and is not present in the lower level processor
  caches. When 0, no bus cache line replacement transaction will
  be seen on the bus. When 1, bus cache line replacement
  transactions will be seen on the bus when the above condition is
  detected.

**/
#define PAL_BUS_ENABLE_EXCLUSIVE_CACHE_LINE_REPLACEMENT   BIT53


/**
   
  Enable a bus cache line replacement transaction when a cache
  line in the shared or exclusive state is replaced from the
  highest level processor cache and is not present in the lower
  level processor caches.
  When 0, no bus cache line replacement transaction will be seen
  on the bus. When 1, bus cache line replacement transactions
  will be seen on the bus when the above condition is detected.

**/
#define PAL_BUS_ENABLE_SHARED_CACHE_LINE_REPLACEMENT   BIT52


  
/**
   
  When 0, the data bus is configured at the 2x data transfer
  rate.When 1, the data bus is configured at the 1x data
  transfer rate, 30 Opt. Req. Disable Bus Lock Mask. When 0, the
  processor executes locked transactions atomically. When 1, the
  processor masks the bus lock signal and executes locked
  transactions as a non-atomic series of transactions.

**/
#define PAL_BUS_ENABLE_HALF_TRANSFER   BIT30

/**
   
  When 0, the processor will deassert bus request when finished
  with each transaction. When 1, the processor will continue to
  assert bus request after it has finished, if it was the last
  agent to own the bus and if there are no other pending
  requests.

**/
#define PAL_BUS_REQUEST_BUS_PARKING   BIT29


/**
  
  PAL Procedure - PAL_BUS_GET_FEATURES.
  
  Return configurable processor bus interface features and their
  current settings. It is required by IPF. The PAL procedure
  supports the Stacked Register calling convention. It could be
  called at physical mode.
  
  @param Index  Index of PAL_BUS_GET_FEATURES within the list
                of PAL procedures.

  @return R9    64-bit vector of features implemented.
                (1=implemented, 0=not implemented)

  @return R10   64-bit vector of current feature settings.

  @return R11   64-bit vector of features controllable by
                software. (1=controllable, 0= not controllable)

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_BUS_GET_FEATURES 9

/**
  
  PAL Procedure - PAL_BUS_SET_FEATURES.
  
  Enable or disable configurable features in processor bus
  interface. It is required by IPF. It is required by IPF. The PAL procedure
  supports the Static Registers calling convention. It could be
  called at physical mode.
  
  @param Index  Index of PAL_BUS_SET_FEATURES within the list
                of PAL procedures.
  
  @param FeatureSelect  64-bit vector denoting desired state of
                        each feature (1=select, 0=non-select).

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_BUS_SET_FEATURES 10


/**
  
  PAL Procedure - PAL_DEBUG_INFO.
  
  Return the number of instruction and data breakpoint
  registers. It is required by IPF. It is required by IPF. The
  PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode and virtual
  mode.
  
  @param Index  Index of PAL_DEBUG_INFO within the list of PAL
                procedures.
  
  @return R9  Unsigned 64-bit integer denoting the number of
              pairs of instruction debug registers implemented
              by the processor. 
  
  @return R10 Unsigned 64-bit integer denoting the number of
              pairs of data debug registers implemented by the
              processor.
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_DEBUG_INFO  11

/**
  
  PAL Procedure - PAL_FIXED_ADDR.
  
  Return the fixed component of a processor¡¯s directed address.
  It is required by IPF. It is required by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode and virtual mode.
  
  @param Index  Index of PAL_FIXED_ADDR within the list of PAL
                procedures.
  
  @return R9  Fixed geographical address of this processor. 
  
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_FIXED_ADDR 12

/**
  
  PAL Procedure - PAL_FREQ_BASE.
  
  Return the frequency of the output clock for use by the
  platform, if generated by the processor. It is optinal. The
  PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode and virtual
  mode.
  
  @param Index  Index of PAL_FREQ_BASE within the list of PAL
                procedures.
  
  @return R9  Base frequency of the platform if generated by the
              processor chip.
  
  
  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure

  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_FREQ_BASE 13


/**
  
  PAL Procedure - PAL_FREQ_RATIOS.
  
  Return ratio of processor, bus, and interval time counter to
  processor input clock or output clock for platform use, if
  generated by the processor. It is required by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode and virtual mode.
  
  @param Index  Index of PAL_FREQ_RATIOS within the list of PAL
                procedures.
  
  @return R9  Ratio of the processor frequency to the input
              clock of the processor, if the platform clock is
              generated externally or to the output clock to the
              platform, if the platform clock is generated by
              the processor.
  
  @return R10 Ratio of the bus frequency to the input clock of
              the processor, if the platform clock is generated
              externally or to the output clock to the platform,
              if the platform clock is generated by the
              processor.
  
  @return R11 Ratio of the interval timer counter rate to input
              clock of the processor, if the platform clock is
              generated externally or to the output clock to the
              platform, if the platform clock is generated by
              the processor.
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_FREQ_RATIOS 14

/**
   
  @param NumberOfLogicalProcessors  Total number of logical
                                    processors on this physical
                                    processor package that are
                                    enabled.

  @param  ThreadsPerCore Number of threads per core.

  @param CoresPerProcessor  Total number of cores on this
                            physical processor package.

  @param PhysicalProcessorPackageId   Physical processor package
                                      identifier which was
                                      assigned at reset by the
                                      platform or bus
                                      controller. This value may
                                      or may not be unique
                                      across the entire platform
                                      since it depends on the
                                      platform vendor's policy.
**/
typedef struct {
  UINT64  NumberOfLogicalProcessors:16;
  UINT64  ThreadsPerCore:8;
  UINT64  Reserved1:8;
  UINT64  CoresPerProcessor;
  UINT64  Reserved2:8;
  UINT64  PhysicalProcessorPackageId:8;
  UINT64  Reserved3:8;
} PAL_LOGICAL_PROCESSPR_OVERVIEW;

/**
   
  @param ThreadId   The thread identifier of the logical
                    processor for which information is being
                    returned. This value will be unique on a per
                    core basis.

  @param CoreId     The core identifier of the logical processor
                    for which information is being returned.
                    This value will be unique on a per physical
                    processor package basis.

**/
typedef struct {
   UINT64 ThreadId:16;
   UINT64 Reserved1:16;
   UINT64 CoreId:16;
   UINT64 Reserved2:16;
} PAL_LOGICAL_PROCESSORN_INFO1;


/**
   
  @param LogicalAddress Geographical address of the logical
                        processor for which information is being
                        returned. This is the same value that is
                        returned by the PAL_FIXED_ADDR procedure
                        when it is called on the logical
                        processor.


**/
typedef struct {
   UINT64 LogicalAddress:16;
   UINT64 Reserved:48;
} PAL_LOGICAL_PROCESSORN_INFO2;

/**
  
  PAL Procedure - PAL_LOGICAL_TO_PHYSICAL.
  
  Return information on which logical processors map to a
  physical processor die. It is optinal. The PAL procedure
  supports the Static Registers calling convention. It could be
  called at physical mode and virtual mode.
  
  @param Index  Index of PAL_LOGICAL_TO_PHYSICAL within the list of PAL
                procedures.
  
  @param ProcessorNumber  Signed 64-bit integer that specifies
                          for which logical processor
                          information is being requested. When
                          this input argument is -1, information
                          is returned about the logical
                          processor on which the procedure call
                          is made. This input argument must be
                          in the range of 1 up to one less than
                          the number of logical processors
                          returned by num_log in the
                          log_overview return value.
  
  
  @return R9  The format of PAL_LOGICAL_PROCESSPR_OVERVIEW.
  
  @return R10 The format of PAL_LOGICAL_PROCESSORN_INFO1.
  
  @return R11 The format of PAL_LOGICAL_PROCESSORN_INFO2.
  
  
  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_LOGICAL_TO_PHYSICAL 42


/**
   
  @param NumberOfPmcPairs   Unsigned 8-bit number defining the
                            number of generic PMC/PMD pairs.

  @param WidthOfCounter   Unsigned 8-bit number in the range
                          0:60 defining the number of
                          implemented counter bits.

  @param TypeOfCycleCounting  Unsigned 8-bit number defining the
                              event type for counting processor
                              cycles.


  @param TypeOfRetiredInstructionBundle   Retired Unsigned 8-bit
                                          number defining the
                                          event type for retired
                                          instruction bundles.

**/
typedef struct {
  UINT64  NumberOfPmcPairs:8;
  UINT64  WidthOfCounter:8;
  UINT64  TypeOfCycleCounting:8;
  UINT64  TypeOfRetiredInstructionBundle:8;
  UINT64  Reserved:32;
} PAL_PERFORMANCE_INFO;

/**
  
  PAL Procedure - PAL_PERF_MON_INFO.
  
  Return the number and type of performance monitors. It is
  required by IPF. The PAL procedure supports the Static
  Registers calling convention. It could be called at physical
  mode and virtual mode.
  
  @param Index  Index of PAL_PERF_MON_INFO within the list of
                PAL procedures.
  
  @param PerformanceBuffer  An address to an 8-byte aligned
                            128-byte memory buffer.
  
  
  @return R9  Information about the performance monitors
              implemented. See PAL_PERFORMANCE_INFO;
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_PERF_MON_INFO 15

#define PAL_PLATFORM_ADDR_INTERRUPT_BLOCK_TOKEN                       0x0
#define PAL_PLATFORM_ADDR_IO_BLOCK_TOKEN                              0x1

/**
  
  PAL Procedure - PAL_PLATFORM_ADDR.
  
  Specify processor interrupt block address and I/O port space
  address. It is required by IPF. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical mode and virtual mode.
  
  @param Index  Index of PAL_PLATFORM_ADDR within the list of
                PAL procedures.
  
  @param Type   Unsigned 64-bit integer specifying the type of
                block. 0 indicates that the processor interrupt
                block pointer should be initialized. 1 indicates
                that the processor I/O block pointer should be
                initialized.
  
  @param Address  Unsigned 64-bit integer specifying the address
                  to which the processor I/O block or interrupt
                  block shall be set. The address must specify
                  an implemented physical address on the
                  processor model, bit 63 is ignored.
  
  
  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure.
  
  @return Status  -2 - Invalid argument

  @return Status  -3 - Call completed with error.
   
**/
#define PAL_PLATFORM_ADDR 16


/**
   
  @param EnableBerrPromotion  Bit63. Enable BERR promotion. When
                              1, the Bus Error (BERR) signal is
                              promoted to the Bus Initialization
                              (BINIT) signal, and the BINIT pin
                              is asserted on the occurrence of
                              each Bus Error. Setting this bit
                              has no effect if BINIT signalling
                              is disabled. (See
                              PAL_BUS_GET/SET_FEATURES)
  
  @param EnableMcaPromotion   Bit62, Enable MCA promotion. When
                              1, machine check aborts (MCAs) are
                              promoted to the Bus Error signal,
                              and the BERR pin is assert on each
                              occurrence of an MCA. Setting this
                              bit has no effect if BERR
                              signalling is disabled. (See
                              PAL_BUS_GET/SET_FEATURES)

  @param EnableMcaToBinitPromotion  Bit61, Enable MCA to BINIT
                                    promotion. When 1, machine
                                    check aborts (MCAs) are
                                    promoted to the Bus
                                    Initialization signal, and
                                    the BINIT pin is assert on
                                    each occurrence of an MCA.
                                    Setting this bit has no
                                    effect if BINIT signalling
                                    is disabled. (See
                                    PAL_BUS_GET/SET_FEATURES)

  @param EnableCmciPromotion  Bit60, Enable CMCI promotion When
                              1, Corrected Machine Check
                              Interrupts (CMCI) are promoted to
                              MCAs. They are also further
                              promoted to BERR if bit 39, Enable
                              MCA promotion, is also set and
                              they are promoted to BINIT if bit
                              38, Enable MCA to BINIT promotion,
                              is also set. This bit has no
                              effect if MCA signalling is
                              disabled (see
                              PAL_BUS_GET/SET_FEATURES)

  @param DisableCache   Bit59, Disable Cache. When 0, the
                        processor performs cast outs on
                        cacheable pages and issues and responds
                        to coherency requests normally. When 1,
                        the processor performs a memory access
                        for each reference regardless of cache
                        contents and issues no coherence
                        requests and responds as if the line
                        were not present. Cache contents cannot
                        be relied upon when the cache is
                        disabled. WARNING: Semaphore
                        instructions may not be atomic or may
                        cause Unsupported Data Reference faults
                        if caches are disabled.

  @param DisableCoherency   Bit58, Disable Coherency. When 0,
                            the processor uses normal coherency
                            requests and responses. When 1, the
                            processor answers all requests as if
                            the line were not present.

  @param DisableDPM   Bit57, Disable Dynamic Power Management
                      (DPM). When 0, the hardware may reduce
                      power consumption by removing the clock
                      input from idle functional units. When 1,
                      all functional units will receive clock
                      input, even when idle.

  @param DisableBinitWithTimeout  Bit56, Disable a BINIT on
                                  internal processor time-out.
                                  When 0, the processor may
                                  generate a BINIT on an
                                  internal processor time-out.
                                  When 1, the processor will not
                                  generate a BINIT on an
                                  internal processor time-out.
                                  The event is silently ignored.


  @param EnableEnvNotification  Bit55, Enable external
                                notification when the processor
                                detects hardware errors caused
                                by environmental factors that
                                could cause loss of
                                deterministic behavior of the
                                processor. When 1, this bit will
                                enable external notification,
                                when 0 external notification is
                                not provided. The type of
                                external notification of these
                                errors is processor-dependent. A
                                loss of processor deterministic
                                behavior is considered to have
                                occurred if these
                                environmentally induced errors
                                cause the processor to deviate
                                from its normal execution and
                                eventually causes different
                                behavior which can be observed
                                 at the processor bus pins.
                                Processor errors that do not
                                have this effects (i.e.,
                                software induced machine checks)
                                may or may not be promoted
                                depending on the processor
                                implementation.

  @param EnableVmsw   Bit54, Enable the use of the vmsw
                      instruction. When 0, the vmsw instruction
                      causes a Virtualization fault when
                      executed at the most privileged level.
                      When 1, this bit will enable normal
                      operation of the vmsw instruction.

  @param EnableMcaOnDataPoisoning   Bit53, Enable MCA signaling
                                    on data-poisoning event
                                    detection. When 0, a CMCI
                                    will be signaled on error
                                    detection. When 1, an MCA
                                    will be signaled on error
                                    detection. If this feature
                                    is not supported, then the
                                    corresponding argument is
                                    ignored when calling
                                    PAL_PROC_SET_FEATURES. Note
                                    that the functionality of
                                    this bit is independent of
                                    the setting in bit 60
                                    (Enable CMCI promotion), and
                                    that the bit 60 setting does
                                    not affect CMCI signaling
                                    for data-poisoning related
                                    events. Volume 2: Processor
                                    Abstraction Layer 2:431
                                    PAL_PROC_GET_FEATURES

  @param DisablePState  Bit52, Disable P-states. When 1, the PAL
                        P-state procedures (PAL_PSTATE_INFO,
                        PAL_SET_PSTATE, PAL_GET_PSTATE) will
                        return with a status of -1
                        (Unimplemented procedure).

  @param DisableBranchPrediction  Bit47, Disable Dynamic branch
                                  prediction. When 0, the
                                  processor may predict branch
                                  targets and speculatively
                                  execute, but may not commit
                                  results. When 1, the processor
                                  must wait until branch targets
                                  are known to execute.

  @param DisableDynamicInsCachePrefetch Bit46, Disable
                                        DynamicInstruction Cache
                                        Prefetch. When 0, the
                                        processor may prefetch
                                        into the caches any
                                        instruction which has
                                        not been executed, but
                                        whose execution is
                                        likely. When 1,
                                        instructions may not be
                                        fetched until needed or
                                        hinted for execution.
                                        (Prefetch for a hinted
                                        branch is allowed even
                                        when dynamic instruction
                                        cache prefetch is
                                        disabled.)

  @param DisableDynamicDataCachePrefetch  Bit45, Disable Dynamic
                                          Data Cache Prefetch.
                                          When 0, the processor
                                          may prefetch into the
                                          caches any data which
                                          has not been accessed
                                          by instruction
                                          execution, but which
                                          is likely to be
                                          accessed. When 1, no
                                          data may be fetched
                                          until it is needed for
                                          instruction execution
                                          or is fetched by an
                                          lfetch instruction.

  @param DisableSpontaneousDeferral   Bit44, Disable Spontaneous
                                      Deferral. When 1, the
                                      processor may optionally
                                      defer speculative loads
                                      that do not encounter any
                                      exception conditions, but
                                      that trigger other
                                      implementation-dependent
                                      conditions (e.g., cache
                                      miss). When 0, spontaneous
                                      deferral is disabled.

  @param DisableDynamicPrediction   Bit43, Disable Dynamic
                                    Predicate Prediction. When
                                    0, the processor may predict
                                    predicate results and
                                    execute speculatively, but
                                    may not commit results until
                                    the actual predicates are
                                    known. When 1, the processor
                                    shall not execute predicated
                                    instructions until the
                                    actual predicates are known.

  @param NoXr1ThroughXr3  Bit42, No XR1 through XR3 implemented.
                          Denotes whether XR1 XR3 are
                          implemented for machine check
                          recovery. This feature may only be
                          interrogated by PAL_PROC_GET_FEATURES.
                          It may not be enabled or disabled by
                          PAL_PROC_SET_FEATURES. The
                          corresponding argument is ignored.

  @param NoXipXpsrXfs   Bit41, No XIP, XPSR, and XFS
                        implemented. Denotes whether XIP, XPSR,
                        and XFS are implemented for machine
                        check recovery. This feature may only be
                        interrogated by PAL_PROC_GET_FEATURES.
                        It may not be enabled or disabled by
                        PAL_PROC_SET_FEATURES. The corresponding
                        argument is ignored.

  @param NoVM   Bit40, No Virtual Machine features implemented.
                Denotes whether PSR.vm is implemented. This
                feature may only be interrogated by
                PAL_PROC_GET_FEATURES. It may not be enabled or
                disabled by PAL_PROC_SET_FEATURES. The
                corresponding argument is ignored.

  @param NoVariablePState   Bit39, No Variable P-state
                            performance: A value of 1, indicates
                            that a processor implements
                            techniques to optimize performance
                            for the given P-state power budget
                            by dynamically varying the
                            frequency, such that maximum
                            performance is achieved for the
                            power budget. A value of 0,
                            indicates that P-states have no
                            frequency variation or very small
                            frequency variations for their given
                            power budget. This feature may only
                            be interrogated by
                            PAL_PROC_GET_FEATURES. it may not be
                            enabled or disabled by
                            PAL_PROC_SET_FEATURES. The
                            corresponding argument is ignored.


  @param NoSimpleImpInUndefinedIns  Bit38, No Simple
                                    implementation of
                                    unimplemented instruction
                                    addresses. Denotes how an
                                    unimplemented instruction
                                    address is recorded in IIP
                                    on an Unimplemented
                                    Instruction Address trap or
                                    fault. When 1, the full
                                    unimplemented address is
                                    recorded in IIP; when 0, the
                                    address is sign extended
                                    (virtual addresses) or zero
                                    extended (physical
                                    addresses). This feature may
                                    only be interrogated by
                                    PAL_PROC_GET_FEATURES. It
                                    may not be enabled or
                                    disabled by
                                    PAL_PROC_SET_FEATURES. The
                                    corresponding argument is
                                    ignored.

  @param NoPresentPmi   Bit37, No INIT, PMI, and LINT pins
                        present. Denotes the absence of INIT,
                        PMI, LINT0 and LINT1 pins on the
                        processor. When 1, the pins are absent.
                        When 0, the pins are present. This
                        feature may only be interrogated by
                        PAL_PROC_GET_FEATURES. It may not be
                        enabled or disabled by
                        PAL_PROC_SET_FEATURES. The corresponding
                        argument is ignored.

  @param FaultInUndefinedIns  Bit36, No Unimplemented
                              instruction address reported as
                              fault. Denotes how the processor
                              reports the detection of
                              unimplemented instruction
                              addresses. When 1, the processor
                              reports an Unimplemented
                              Instruction Address fault on the
                              unimplemented address; when 0, it
                              reports an Unimplemented
                              Instruction Address trap on the
                              previous instruction in program
                              order. This feature may only be
                              interrogated by
                              PAL_PROC_GET_FEATURES. It may not
                               be enabled or disabled by
                               PAL_PROC_SET_FEATURES. The
                               corresponding argument is
                               ignored.

**/
typedef struct {
  UINT64  Reserved1:36;
  UINT64  FaultInUndefinedIns:1;
  UINT64  NoPresentPmi:1;
  UINT64  NoSimpleImpInUndefinedIns:1;
  UINT64  NoVariablePState:1;
  UINT64  NoVM:1;
  UINT64  NoXipXpsrXfs:1;
  UINT64  NoXr1ThroughXr3:1;
  UINT64  DisableDynamicPrediction:1;
  UINT64  DisableSpontaneousDeferral:1;
  UINT64  DisableDynamicDataCachePrefetch:1;
  UINT64  DisableDynamicInsCachePrefetch:1;
  UINT64  DisableBranchPrediction:1;
  UINT64  Reserved2:4;
  UINT64  DisablePState:1;
  UINT64  EnableMcaOnDataPoisoning:1;
  UINT64  EnableVmsw:1;
  UINT64  EnableEnvNotification:1;
  UINT64  DisableBinitWithTimeout:1;
  UINT64  DisableDPM:1;
  UINT64  DisableCoherency:1;
  UINT64  DisableCache:1;
  UINT64  EnableCmciPromotion:1;
  UINT64  EnableMcaToBinitPromotion:1;
  UINT64  EnableMcaPromotion:1;
  UINT64  EnableBerrPromotion:1;
} PAL_PROCESSOR_FEATURES;

/**
  
  PAL Procedure - PAL_PROC_GET_FEATURES.
  
  Return configurable processor features and their current
  setting. It is required by IPF. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical mode and virtual mode.
  
  @param Index  Index of PAL_PROC_GET_FEATURES within the list of
                PAL procedures.
  
  @param Reserved   Reserved parameter.
  
  @param FeatureSet   Feature set information is being requested
                      for.
  
  
  @return R9  64-bit vector of features implemented. See
              PAL_PROCESSOR_FEATURES.
  
  @return R10 64-bit vector of current feature settings. See
              PAL_PROCESSOR_FEATURES.
  
  @return R11 64-bit vector of features controllable by
              software.
  
  @return Status  1 - Call completed without error; The
                  feature_set passed is not supported but a
                  feature_set of a larger value is supported.
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -8 - feature_set passed is beyond the maximum
                  feature_set supported
   
**/
#define PAL_PROC_GET_FEATURES 17


/**
  
  PAL Procedure - PAL_PROC_SET_FEATURES.
  
  Enable or disable configurable processor features. It is
  required by IPF. The PAL procedure supports the Static
  Registers calling convention. It could be called at physical
  mode.
  
  @param Index  Index of PAL_PROC_SET_FEATURES within the list of
                PAL procedures.
  
  @param FeatureSelect  64-bit vector denoting desired state of
                        each feature (1=select, 0=non-select).

  @param FeatureSet   Feature set to apply changes to. See
                      PAL_PROC_GET_FEATURES for more information
                      on feature sets.
  
  
  
  @return Status  1 - Call completed without error; The
                  feature_set passed is not supported but a
                  feature_set of a larger value is supported
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -8 - feature_set passed is beyond the maximum
                  feature_set supported
   
**/
#define PAL_PROC_SET_FEATURES 18


//
// Value of PAL_REGISTER_INFO.InfoRequest.
// 
#define PAL_APPLICATION_REGISTER_IMPLEMENTED  0
#define PAL_APPLICATION_REGISTER_READABLE     1
#define PAL_CONTROL_REGISTER_IMPLEMENTED      2
#define PAL_CONTROL_REGISTER_READABLE         3


/**
  
  PAL Procedure - PAL_REGISTER_INFO.
  
  Return AR and CR register information. It is required by IPF.
  The PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode and virtual
  mode.
  
  @param Index  Index of PAL_REGISTER_INFO within the list of
                PAL procedures.
  
  @param InfoRequest  Unsigned 64-bit integer denoting what
                      register information is requested. See
                      PAL_REGISTER_INFO.InfoRequest above.
  
  @return R9  64-bit vector denoting information for registers
              0-63. Bit 0 is register 0, bit 63 is register 63.
  
  @return R10 64-bit vector denoting information for registers
              64-127. Bit 0 is register 64, bit 63 is register
              127.
  
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  
**/
#define PAL_REGISTER_INFO 39 

/**
  
  PAL Procedure - PAL_RSE_INFO.
  
  Return RSE information. It is required by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode and virtual mode.
  
  @param Index  Index of PAL_RSE_INFO within the list of
                PAL procedures.
  
  @param InfoRequest  Unsigned 64-bit integer denoting what
                      register information is requested. See
                      PAL_REGISTER_INFO.InfoRequest above.
  
  @return R9  Number of physical stacked general registers.

  @return R10 RSE hints supported by processor.
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  
**/
#define PAL_RSE_INFO 19

/**
   
  @param VersionOfPalB  Is a 16-bit binary coded decimal (BCD)
                        number that provides identification
                        information about the PAL_B firmware.

  @param PalVendor  Is an unsigned 8-bit integer indicating the
                    vendor of the PAL code.

  @param VersionOfPalB  Is a 16-bit binary coded decimal (BCD)
                        number that provides identification
                        information about the PAL_A firmware. In
                        the split PAL_A model, this return value
                        is the version number of the
                        processor-specific PAL_A. The generic
                        PAL_A version is not returned by this
                        procedure in the split PAL_A model.

**/
typedef struct {
  UINT64  VersionOfPalB:16;
  UINT64  Reserved1:8;
  UINT64  PalVendor:8;
  UINT64  VersionOfPalA:16;
  UINT64  Reserved2:16;
} PAL_VERSION_INFO;

/**
  
  PAL Procedure - PAL_VERSION.
  
  Return version of PAL code. It is required by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode and virtual mode.
  
  @param Index  Index of PAL_VERSION within the list of
                PAL procedures.
  
  @param InfoRequest  Unsigned 64-bit integer denoting what
                      register information is requested. See
                      PAL_REGISTER_INFO.InfoRequest above.
  
  @return R9  8-byte formatted value returning the minimum PAL
              version needed for proper operation of the
              processor. See PAL_VERSION_INFO above.
  
  @return R10 8-byte formatted value returning the current PAL
              version running on the processor. See
              PAL_VERSION_INFO above.
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  
**/
#define PAL_VERSION 20



//
// Vectors of PAL_MC_CLEAR_LOG.pending
// 
#define PAL_MC_PENDING    BIT0
#define PAL_INIT_PENDING  BIT1

/**
  
  PAL Procedure - PAL_MC_CLEAR_LOG.
  
  Clear all error information from processor error logging
  registers. It is required by IPF. The PAL procedure supports
  the Static Registers calling convention. It could be called at
  physical mode and virtual mode.
  
  @param Index  Index of PAL_MC_CLEAR_LOG within the list of
                PAL procedures.
  
  
  @return R9  64-bit vector denoting whether an event is
              pending. See PAL_MC_CLEAR_LOG.pending above.
  
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  
**/
#define PAL_MC_CLEAR_LOG 21 

/**
  
  PAL Procedure - PAL_MC_DRAIN.
  
  Ensure that all operations that could cause an MCA have
  completed. It is required by IPF. The PAL procedure supports
  the Static Registers calling convention. It could be called at
  physical mode and virtual mode.
  
  @param Index  Index of PAL_MC_DRAIN within the list of PAL
                procedures.
 
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  
**/
#define PAL_MC_DRAIN 22


/**
  
  PAL Procedure - PAL_MC_DYNAMIC_STATE.
  
  Return Processor Dynamic State for logging by SAL. It is
  optional. The PAL procedure supports the Static Registers
  calling convention. It could be called at physical mode.
  
  @param Index  Index of PAL_MC_DYNAMIC_STATE within the list of PAL
                procedures.
  
  @param Offset Offset of the next 8 bytes of Dynamic Processor
                State to return. (multiple of 8).
  
  @return R9  Unsigned 64-bit integer denoting bytes of Dynamic
              Processor State returned.
  
  @return R10 Next 8 bytes of Dynamic Processor State.
  
  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure.
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  
**/
#define PAL_MC_DYNAMIC_STATE 24 



//
// Values of PAL_MC_ERROR_INFO.InfoIndex.
// 
#define PAL_PROCESSOR_ERROR_MAP       0
#define PAL_PROCESSOR_STATE_PARAM     1
#define PAL_STRUCTURE_SPECIFIC_ERROR  2

/**
   
  @param CoreId   Bit3:0,  Processor core ID (default is 0 for
                  processors with a single core)

  @param ThreadId   Bit7:4, Logical thread ID (default is 0 for
                    processors that execute a single thread) 

  @param InfoOfInsCache   Bit11:8, Error information is
                          available for 1st, 2nd, 3rd, and 4th
                          level instruction caches.

  @param InfoOfDataCache  Bit15:12, Error information is
                          available for 1st, 2nd, 3rd, and 4th
                          level data/unified caches.

  @param InfoOfInsTlb   Bit19:16 Error information is available
                        for 1st, 2nd, 3rd, and 4th level
                        instruction TLB.

  @param InfoOfDataTlb  Bit23:20, Error information is available
                        for 1st, 2nd, 3rd, and 4th level
                        data/unified TLB

  @param InfoOfProcessorBus   Bit27:24 Error information is
                              available for the 1st, 2nd, 3rd,
                              and 4th level processor bus
                              hierarchy.

  @param InfoOfRegisterFile   Bit31:28 Error information is
                              available on register file
                              structures.

  @param InfoOfMicroArch  Bit47:32, Error information is
                          available on micro-architectural
                          structures.

**/
typedef struct {
 UINT64 CoreId:4;
 UINT64 ThreadId:4;
 UINT64 InfoOfInsCache:4;
 UINT64 InfoOfDataCache:4;
 UINT64 InfoOfInsTlb:4;
 UINT64 InfoOfDataTlb:4;
 UINT64 InfoOfProcessorBus:4;
 UINT64 InfoOfRegisterFile:4;
 UINT64 InfoOfMicroArch:4;
 UINT64 Reserved:16;
} PAL_MC_ERROR_INFO_LEVEL_INDEX;

//
// Value of PAL_MC_ERROR_INFO.ErrorTypeIndex
// 
#define PAL_ERR_INFO_BY_LEVEL_INDEX               0
#define PAL_ERR_INFO_TARGET_ADDRESS               1
#define PAL_ERR_INFO_REQUESTER_IDENTIFIER         2
#define PAL_ERR_INFO_REPONSER_INDENTIFIER         3
#define PAL_ERR_INFO_PRECISE_INSTRUCTION_POINTER  4

/**

  @param Operation  Bit3:0, Type of cache operation that caused
                    the machine check: 0 - unknown or internal
                    error 1 - load 2 - store 3 - instruction
                    fetch or instruction prefetch 4 - data
                    prefetch (both hardware and software) 5 -
                    snoop (coherency check) 6 - cast out
                    (explicit or implicit write-back of a cache
                    line) 7 - move in (cache line fill) 

  @param FailedCacheLevel   Bit5:4 Level of cache where the
                            error occurred. A value of 0
                            indicates the first level of cache.

  @param FailedInDataPart   Bit8, Failure located in the data
                            part of the cache line.

  @param FailedInTagPart  Bit9, Failure located in the tag part
                          of the cache line.

  @param FailedInDataCache  Bit10, Failure located in the data
                            cache

  @param FailedInInsCache   Bit11, Failure located in the
                            instruction cache.


  @param Mesi   Bit14:12,  0 - cache line is invalid. 1 - cache
                line is held shared. 2 - cache line is held
                exclusive. 3 - cache line is modified. All other
                values are reserved.

  @param MesiIsValid  Bit15, The mesi field in the cache_check
                      parameter is valid.

  @param FailedWay  Bit20:16, Failure located in the way of
                    the cache indicated by this value.

  @param WayIndexIsValid  Bit21, The way and index field in the
                          cache_check parameter is valid.

  @param MultipleBitsError  Bit23, A multiple-bit error was
                            detected, and data was poisoned for
                            the corresponding cache line during
                            castout. 

  @param IndexOfCacheLineError  Bit51:32, Index of the cache
                                line where the error occurred.

  @param InstructionSet   Bit54, Instruction set. If this value
                          is set to zero, the instruction that
                          generated the machine check was an
                          Intel Itanium instruction. If this bit
                          is set to one, the instruction that
                          generated the machine check was IA-32
                          instruction.

  @param InstructionSetIsValid  Bit55, The is field in the
                                cache_check parameter is valid.

  @param PrivilegeLevel   Bit57:56, Privilege level. The
                          privilege level of the instruction
                          bundle responsible for generating the
                          machine check.

  @param PrivilegeLevelIsValide   Bit58, The pl field of the
                                  cache_check parameter is
                                  valid.

  @param McCorrected  Bit59, Machine check corrected: This bit
                      is set to one to indicate that the machine
                      check has been corrected.

  @param TargetAddressIsValid   Bit60, Target address is valid:
                                This bit is set to one to
                                indicate that a valid target
                                address has been logged.

  @param RequesterIdentifier  Bit61, Requester identifier: This
                              bit is set to one to indicate that
                              a valid requester identifier has
                              been logged.

  @param ResponserIdentifier  Bit62, Responder identifier: This
                              bit is set to one to indicate that
                              a valid responder identifier has
                              been logged.

  @param PreciseInsPointer  Bit63,  Precise instruction pointer.
                            This bit is set to one to indicate
                            that a valid precise instruction
                            pointer has been logged.

**/
typedef struct {
  UINT64  Operation:4;
  UINT64  FailedCacheLevel:2;
  UINT64  Reserved1:2;
  UINT64  FailedInDataPart:1;
  UINT64  FailedInTagPart:1;
  UINT64  FailedInDataCache:1;
  UINT64  FailedInInsCache:1;
  UINT64  Mesi:3;
  UINT64  MesiIsValid:1;
  UINT64  FailedWay:5;
  UINT64  WayIndexIsValid:1;

  UINT64  Reserved2:1;
  UINT64  MultipleBitsError:1;
  UINT64  Reserved3:8;
  UINT64  IndexOfCacheLineError:20;
  UINT64  Reserved4:2;
  UINT64  InstructionSet:1;
  UINT64  InstructionSetIsValid:1;

  UINT64  PrivilegeLevel:2;
  UINT64  PrivilegeLevelIsValide:1;

  UINT64  McCorrected:1;

  UINT64  TargetAddressIsValid:1;
  UINT64  RequesterIdentifier:1;
  UINT64  ResponserIdentifier:1;
  UINT64  PreciseInsPointer:1;

} PAL_CACHE_CHECK_INFO;

/**
   
  @param FailedSlot   Bit7:0, Slot number of the translation
                      register where the failure occurred.

  @param FailedSlotIsValid  Bit8, The tr_slot field in the
                            TLB_check parameter is valid.

  @param TlbLevel   Bit11:10,  The level of the TLB where the
                    error occurred. A value of 0 indicates the
                    first level of TLB 

  @param FailedInDataTr   Bit16, Error occurred in the data
                          translation registers.

  @param FailedInInsTr  Bit17, Error occurred in the instruction
                        translation registers

  @param FailedInDataTc   Bit18, Error occurred in data
                          translation cache.

  @param FailedInInsTc  Bit19, Error occurred in the instruction
                        translation cache.

  @param FailedOperation  Bit23:20, Type of cache operation that
                          caused the machine check: 0 - unknown
                          1 - TLB access due to load instruction
                          2 - TLB access due to store
                          instruction 3 - TLB access due to
                          instruction fetch or instruction
                          prefetch 4 - TLB access due to data
                          prefetch (both hardware and software)
                          5 - TLB shoot down access 6 - TLB
                          probe instruction (probe, tpa) 7 -
                          move in (VHPT fill) 8 - purge (insert
                          operation that purges entries or a TLB
                          purge instruction) All other values
                          are reserved.

  @param InstructionSet   Bit54, Instruction set. If this value
                          is set to zero, the instruction that
                          generated the machine check was an
                          Intel Itanium instruction. If this bit
                          is set to one, the instruction that
                          generated the machine check was IA-32
                          instruction.

  @param InstructionSetIsValid  Bit55, The is field in the
                                TLB_check parameter is valid.

  @param PrivelegeLevel   Bit57:56, Privilege level. The
                          privilege level of the instruction
                          bundle responsible for generating the
                          machine check.

  @param PrivelegeLevelIsValid  Bit58,  The pl field of the
                                TLB_check parameter is valid.

  @param McCorrected  Bit59, Machine check corrected: This bit
                      is set to one to indicate that the machine
                      check has been corrected.

  @param TargetAddressIsValid   Bit60, Target address is valid:
                                This bit is set to one to
                                indicate that a valid target
                                address has been logged.

  @param RequesterIdentifier  Bit61 Requester identifier: This
                              bit is set to one to indicate that
                              a valid requester identifier has
                              been logged.

  @param ResponserIdentifier  Bit62, Responder identifier:  This
                              bit is set to one to indicate that
                              a valid responder identifier has
                              been logged.

  @param PreciseInsPointer    Bit63 Precise instruction pointer.
                              This bit is set to one to indicate
                              that a valid precise instruction
                              pointer has been logged.
**/
typedef struct {
  UINT64  FailedSlot:8;
  UINT64  FailedSlotIsValid:1;
  UINT64  Reserved1 :1;
  UINT64  TlbLevel:2;
  UINT64  Reserved2 :4;
  UINT64  FailedInDataTr:1;
  UINT64  FailedInInsTr:1;
  UINT64  FailedInDataTc:1;
  UINT64  FailedInInsTc:1;
  UINT64  FailedOperation:4;
  UINT64  Reserved3:30;
  UINT64  InstructionSet:1;
  UINT64  InstructionSetIsValid:1;
  UINT64  PrivelegeLevel:2;
  UINT64  PrivelegeLevelIsValid:1;
  UINT64  McCorrected:1;
  UINT64  TargetAddressIsValid:1;
  UINT64  RequesterIdentifier:1;
  UINT64  ResponserIdentifier:1;
  UINT64  PreciseInsPointer:1;
} PAL_TLB_CHECK_INFO;

/**
  
  PAL Procedure - PAL_MC_ERROR_INFO.
  
  Return Processor Machine Check Information and Processor
  Static State for logging by SAL. It is required by IPF. The
  PAL procedure supports the Static Registers calling
  convention. It could be called at physical and virtual mode.
  
  @param Index  Index of PAL_MC_ERROR_INFO within the list of PAL
                procedures.
  
  @param InfoIndex  Unsigned 64-bit integer identifying the
                    error information that is being requested.
                    See PAL_MC_ERROR_INFO.InfoIndex.
  
  @param LevelIndex   8-byte formatted value identifying the
                      structure to return error information
                      on. See PAL_MC_ERROR_INFO_LEVEL_INDEX.
  
  @param ErrorTypeIndex   Unsigned 64-bit integer denoting the
                          type of error information that is
                          being requested for the structure
                          identified in LevelIndex.
  
  
  @return R9  Error information returned. The format of this
              value is dependant on the input values passed.
  
  @return R10 If this value is zero, all the error information
              specified by err_type_index has been returned. If
              this value is one, more structure-specific error
              information is available and the caller needs to
              make this procedure call again with level_index
              unchanged and err_type_index, incremented.
  
  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -6 - Argument was valid, but no error
                  information was available
  
  
**/
#define PAL_MC_ERROR_INFO 25

/**
  
  PAL Procedure - PAL_MC_EXPECTED.
  
  Set/Reset Expected Machine Check Indicator. It is required by
  IPF. The PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode.
  
  @param Index  Index of PAL_MC_EXPECTED within the list of PAL
                procedures.
  
  @param Expected   Unsigned integer with a value of 0 or 1 to
                    set or reset the hardware resource
                    PALE_CHECK examines for expected machine
                    checks.
  

  @return R9  Unsigned integer denoting whether a machine check
              was previously expected.
  

  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

**/
#define PAL_MC_EXPECTED 23 

/**
  
  PAL Procedure - PAL_MC_REGISTER_MEM.
  
  Register min-state save area with PAL for machine checks and
  inits. It is required by IPF. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical mode.
  
  @param Index  Index of PAL_MC_REGISTER_MEM within the list of PAL
                procedures.
  
  @param Address  Physical address of the buffer to be
                  registered with PAL.
  

  
  @return Status  0 - Call completed without error
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

**/
#define PAL_MC_REGISTER_MEM 27 

/**
  
  PAL Procedure - PAL_MC_RESUME.
  
  Restore minimal architected state and return to interrupted
  process. It is required by IPF. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical mode.
  
  @param Index  Index of PAL_MC_RESUME within the list of PAL
                procedures.
  
  @param SetCmci  Unsigned 64 bit integer denoting whether to
                  set the CMC interrupt. A value of 0 indicates
                  not to set the interrupt, a value of 1
                  indicated to set the interrupt, and all other
                  values are reserved.

  @param SavePtr  Physical address of min-state save area used
                  to used to restore processor state.

  @param NewContext   Unsigned 64-bit integer denoting whether
                      the caller is returning to a new context.
                      A value of 0 indicates the caller is
                      returning to the interrupted context, a
                      value of 1 indicates that the caller is
                      returning to a new context.
  

  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

**/
#define PAL_MC_RESUME 26 

/**
  
  PAL Procedure - PAL_HALT.
  
  Enter the low-power HALT state or an implementation-dependent
  low-power state. It is optinal. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical mode.
  
  @param Index  Index of PAL_HALT within the list of PAL
                procedures.
  
  @param HaltState  Unsigned 64-bit integer denoting low power
                    state requested.

  @param IoDetailPtr  8-byte aligned physical address pointer to
                      information on the type of I/O
                      (load/store) requested.


  @return R9  Value returned if a load instruction is requested
              in the io_detail_ptr

  
  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

**/
#define PAL_HALT 28


/**
  
  PAL Procedure - PAL_HALT_INFO.
  
  Return the low power capabilities of the processor. It is
  required by IPF. The PAL procedure supports the
  Stacked Registers calling convention. It could be called at
  physical and virtual mode.
  
  @param Index  Index of PAL_HALT_INFO within the list of PAL
                procedures.
  
  @param PowerBuffer  64-bit pointer to a 64-byte buffer aligned
                      on an 8-byte boundary.


  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

**/
#define PAL_HALT_INFO 257


/**
  
  PAL Procedure - PAL_HALT_LIGHT.
  
  Enter the low power LIGHT HALT state. It is required by
  IPF. The PAL procedure supports the Static Registers calling
  convention. It could be called at physical and virtual mode.
  
  @param Index  Index of PAL_HALT_LIGHT within the list of PAL
                procedures.
  
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

**/
#define PAL_HALT_LIGHT 29 

/**
  
  PAL Procedure - PAL_CACHE_LINE_INIT.
  
  Initialize tags and data of a cache line for processor
  testing. It is required by IPF. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical and virtual mode.
  
  @param Index  Index of PAL_CACHE_LINE_INIT within the list of PAL
                procedures.
  
  @param Address  Unsigned 64-bit integer value denoting the
                  physical address from which the physical page
                  number is to be generated. The address must be
                  an implemented physical address, bit 63 must
                  be zero.
  
  @param DataValue  64-bit data value which is used to
                    initialize the cache line.
  
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

**/
#define PAL_CACHE_LINE_INIT 31

/**
  
  PAL Procedure - PAL_CACHE_READ.
  
  Read tag and data of a cache line for diagnostic testing. It
  is optional. The PAL procedure supports the
  Satcked Registers calling convention. It could be called at
  physical mode.
  
  @param Index  Index of PAL_CACHE_READ within the list of PAL
                procedures.
  
  @param LineId   8-byte formatted value describing where in the
                  cache to read the data.

  @param Address  64-bit 8-byte aligned physical address from
                  which to read the data. The address must be an
                  implemented physical address on the processor
                  model with bit 63 set to zero.

  @return R9  Right-justified value returned from the cache
              line.

  @return R10 The number of bits returned in data.

  @return R11 The status of the cache line.


  
  @return Status  1 - The word at address was found in the
                  cache, but the line was invalid.

  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

  @return Status  -5 - The word at address was not found in the
                  cache.
  
  @return Status  -7 - The operation requested is not supported
                  for this cache_type and level.

**/
#define PAL_CACHE_READ 259 


/**
  
  Write tag and data of a cache for diagnostic testing. It is
  optional. The PAL procedure supports the Satcked Registers
  calling convention. It could be called at physical mode.
  
  @param Index  Index of PAL_CACHE_WRITE within the list of PAL
                procedures.
  
  @param LineId   8-byte formatted value describing where in the
                  cache to write the data.

  @param Address  64-bit 8-byte aligned physical address at
                  which the data should be written. The address
                  must be an implemented physical address on the
                  processor model with bit 63 set to 0.

  @param Data     Unsigned 64-bit integer value to write into
                  the specified part of the cache.

  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

  
  @return Status  -7 - The operation requested is not supported
                  for this cache_type and level.

**/
#define PAL_CACHE_WRITE 260

/**
  
  PAL Procedure - PAL_TEST_INFO.
  
  Returns alignment and size requirements needed for the memory
  buffer passed to the PAL_TEST_PROC procedure as well as
  information on self-test control words for the processor self
  tests. It is required by IPF. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical mode.
  
  @param Index  Index of PAL_TEST_INFO within the list of PAL
                procedures.
  
  @param TestPhase  Unsigned integer that specifies which phase
                    of the processor self-test information is
                    being requested on. A value of 0 indicates
                    the phase two of the processor self-test and
                    a value of 1 indicates phase one of the
                    processor self-test. All other values are
                    reserved.
  
  @return R9  Unsigned 64-bit integer denoting the number of
              bytes of main memory needed to perform the second
              phase of processor self-test.
  
  @return R10   Unsigned 64-bit integer denoting the alignment
                required for the memory buffer.
  
  @return R11   48-bit wide bit-field indicating if control of
                the processor self-tests is supported and which
                bits of the test_control field are defined for
                use.

  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.


**/
#define PAL_TEST_INFO 37

/**

  @param BufferSize Indicates the size in bytes of the memory
                    buffer that is passed to this procedure.
                    BufferSize must be greater than or equal in
                    size to the bytes_needed return value from
                    PAL_TEST_INFO, otherwise this procedure will
                    return with an invalid argument return
                    value.

  @param TestPhase  Defines which phase of the processor
                    self-tests are requested to be run. A value
                    of zero indicates to run phase two of the
                    processor self-tests. Phase two of the
                    processor self-tests are ones that require
                    external memory to execute correctly. A
                    value of one indicates to run phase one of
                    the processor self-tests. Phase one of the
                    processor self-tests are tests run during
                    PALE_RESET and do not depend on external
                    memory to run correctly. When the caller
                    requests to have phase one of the processor
                    self-test run via this procedure call, a
                    memory buffer may be needed to save and
                    restore state as required by the PAL calling
                    conventions. The procedure PAL_TEST_INFO
                    informs the caller about the requirements of
                    the memory buffer.

**/
typedef struct {
  UINT64  BufferSize:56;
  UINT64  TestPhase:8;
} PAL_TEST_INFO_INFO;

/**
   
  @param TestControl  This is an ordered implementation-specific
                      control word that allows the user control
                      over the length and runtime of the
                      processor self-tests. This control word is
                      ordered from the longest running tests up
                      to the shortest running tests with bit 0
                      controlling the longest running test. PAL
                      may not implement all 47-bits of the
                      test_control word. PAL communicates if a
                      bit provides control by placing a zero in
                      that bit. If a bit provides no control,
                      PAL will place a one in it. PAL will have
                      two sets of test_control bits for the two
                      phases of the processor self-test. PAL
                      provides information about implemented
                      test_control bits at the hand-off from PAL
                      to SAL for the firmware recovery check.
                      These test_control bits provide control
                      for phase one of processor self-test. It
                      also provides this information via the PAL
                      procedure call PAL_TEST_INFO for both the
                      phase one and phase two processor tests
                      depending on which information the caller
                      is requesting. PAL interprets these bits
                      as input parameters on two occasions. The
                      first time is when SAL passes control back
                      to PAL after the firmware recovery check.
                      The second time is when a call to
                      PAL_TEST_PROC is made. When PAL interprets
                      these bits it will only interpret
                      implemented test_control bits and will
                      ignore the values located in the
                      unimplemented test_control bits. PAL
                      interprets the implemented bits such that
                      if a bit contains a zero, this indicates
                      to run the test. If a bit contains a one,
                      this indicates to PAL to skip the test. If
                      the cs bit indicates that control is not
                       available, the test_control bits will be
                      ignored or generate an illegal argument in
                      procedure calls if the caller sets these
                      bits.

  @param ControlSupport   This bit defines if an implementation
                          supports control of the PAL self-tests
                          via the self-test control word. If
                          this bit is 0, the implementation does
                          not support control of the processor
                          self-tests via the self-test control
                          word. If this bit is 1, the
                          implementation does support control of
                          the processor self-tests via the
                          self-test control word. If control is
                          not supported, GR37 will be ignored at
                          the hand-off between SAL and PAL after
                          the firmware recovery check and the
                          PAL procedures related to the
                          processor self-tests may return
                          illegal arguments if a user tries to
                          use the self-test control features.

**/
typedef struct {
  UINT64  TestControl:47;
  UINT64  ControlSupport:1;
  UINT64  Reserved:16;
} PAL_SELF_TEST_CONTROL;

/**
   
  @param Attributes   Specifies the memory attributes that are
                      allowed to be used with the memory buffer
                      passed to this procedure. The attributes
                      parameter is a vector where each bit
                      represents one of the virtual memory
                      attributes defined by the architecture.See
                      MEMORY_AATRIBUTES. The caller is required
                      to support the cacheable attribute for the
                      memory buffer, otherwise an invalid
                      argument will be returned.


  @param TestControl  Is the self-test control word
                      corresponding to the test_phase passed.
                      This test_control directs the coverage and
                      runtime of the processor self-tests
                      specified by the test_phase input
                      argument. Information on if this
                      feature is implemented and the number of
                      bits supported can be obtained by the
                      PAL_TEST_INFO procedure call. If this
                      feature is implemented by the processor,
                      the caller can selectively skip parts of
                      the processor self-test by setting
                      test_control bits to a one. If a bit has a
                      zero, this test will be run. The values in
                      the unimplemented bits are ignored. If
                      PAL_TEST_INFO indicated that the self-test
                      control word is not implemented, this
                      procedure will return with an invalid
                      argument status if the caller sets any of
                      the test_control bits. See
                      PAL_SELF_TEST_CONTROL.
**/
typedef struct {
  UINT64  Attributes:8;
  UINT64  Reserved:8;
  UINT64  TestControl:48;
} PAL_TEST_CONTROL;

/**
  
  PAL Procedure - PAL_TEST_PROC.
  
  Perform late processor self test. It is required by IPF. The
  PAL procedure supports the Static Registers calling
  convention. It could be called at physical mode.
  
  @param Index  Index of PAL_TEST_PROC within the list of PAL
                procedures.
  
  @param TestAddress  64-bit physical address of main memory
                      area to be used by processor self-test.
                      The memory region passed must be
                      cacheable, bit 63 must be zero.

  @param TestInfo   Input argument specifying the size of the
                    memory buffer passed and the phase of the
                    processor self-test that should be run. See
                    PAL_TEST_INFO.

  @param TestParam  Input argument specifying the self-test
                    control word and the allowable memory
                    attributes that can be used with the memory
                    buffer. See PAL_TEST_CONTROL.
  
  @return R9  Formatted 8-byte value denoting the state of the
              processor after self-test
  
  
              
  @return Status  1 - Call completed without error, but hardware
                  failures occurred during self-test.
  
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.


**/
#define PAL_TEST_PROC 258

/**
   
  @param NumberOfInterruptControllers   Number of interrupt
                                        controllers currently
                                        enabled on the system.

  @param  NumberOfProcessors  Number of processors currently
                              enabled on the system.

**/
typedef struct {
  UINT32  NumberOfInterruptControllers;
  UINT32  NumberOfProcessors;
} PAL_PLATFORM_INFO;

/**
  
  PAL Procedure - PAL_COPY_INFO.
  
  Return information needed to relocate PAL procedures and PAL
  PMI code to memory. It is required by IPF. The PAL procedure
  supports the Static Registers calling convention. It could be
  called at physical mode.
  
  @param Index  Index of PAL_COPY_INFO within the list of PAL
                procedures.
  
  @param CopyType   Unsigned integer denoting type of procedures
                    for which copy information is requested.

  @param PlatformInfo   8-byte formatted value describing the
                        number of processors and the number of
                        interrupt controllers currently enabled
                        on the system. See PAL_PLATFORM_INFO.


  @param McaProcStateInfo   Unsigned integer denoting the number
                            of bytes that SAL needs for the
                            min-state save area for each
                            processor.


  
  @return R9  Unsigned integer denoting the number of bytes of
              PAL information that must be copied to main
              memory.

  @return R10 Unsigned integer denoting the starting alignment
              of the data to be copied.
              
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.


**/
#define PAL_COPY_INFO 30

/**
  
  PAL Procedure - PAL_COPY_PAL.
  
  Relocate PAL procedures and PAL PMI code to memory. It is
  required by IPF. The PAL procedure supports the Stacked
  Registers calling convention. It could be called at physical
  mode.
  
  @param Index  Index of PAL_COPY_PAL within the list of PAL
                procedures.
  
  @param TargetAddress  Physical address of a memory buffer to
                        copy relocatable PAL procedures and PAL
                        PMI code.

  @param AllocSize  Unsigned integer denoting the size of the
                    buffer passed by SAL for the copy operation.


  @param CopyOption   Unsigned integer indicating whether
                      relocatable PAL code and PAL PMI code
                      should be copied from firmware address
                      space to main memory.

  
  @return R9  Unsigned integer denoting the offset of PAL_PROC
              in the relocatable segment copied.
              
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.


**/
#define PAL_COPY_PAL 256

/**
  
  PAL Procedure - PAL_ENTER_IA_32_ENV.
  
  Enter IA-32 System environment. It is optional. The PAL
  procedure supports the Static Registers calling convention.
  It could be called at physical mode.
  
  Note: Since this is a special call, it does not follow the PAL
  static register calling convention. GR28 contains the index of  
  PAL_ENTER_IA_32_ENV within the list of PAL procedures. All other  
  input arguments including GR29-GR31 are setup by SAL to values  
  as required by the IA-32 operating system defined in Table  
  11-67. The registers that are designated as preserved, scratch,  
  input arguments and procedure return values by the static  
  procedure calling convention are not followed by this call. For  
  instance, GR5 and GR6 need not be preserved since these are  
  regarded as scratch by the IA-32 operating system. Note: In an  
  MP system, this call must be COMPLETED on the first CPU to enter  
  the IA-32 System Environment (may or may not be the BSP) prior  
  to being called on the remaining processors in the MP system.  
  
  @param Index  GR28 contains the index of the
                PAL_ENTER_IA_32_ENV call within the list of PAL
                procedures.
  
  
  @return Status  The status is returned in GR4.
                  -1 - Un-implemented procedure 0 JMPE detected
                  at privilege level
  
                  0 - 1 SAL allocated buffer for IA-32 System
                  Environment operation is too small
  
                  2 - IA-32 Firmware Checksum Error
  
                  3 -  SAL allocated buffer for IA-32 System
                  Environment operation is not properly aligned
  
                  4 - Error in SAL MP Info Table
  
                  5 - Error in SAL Memory Descriptor Table
  
                  6 - Error in SAL System Table
  
                  7 - Inconsistent IA-32 state
  
                  8 - IA-32 Firmware Internal Error
  
                  9 - IA-32 Soft Reset (Note: remaining register
                  state is undefined for this termination
                  reason)
  
                  10 - Machine Check Error
  
                  11 - Error in SAL I/O Intercept Table 
  
                  12 - Processor exit due to other processor in
                  MP system terminating the IA32 system
                  environment. (Note: remaining register state
                  is undefined for this termination reason.)
  
                  13 - Itanium architecture-based state
                  corruption by either SAL PMI handler or I/O
                  Intercept callback function.


**/
#define PAL_ENTER_IA_32_ENV 33

/**
  
  PAL Procedure - PAL_PMI_ENTRYPOINT.
  
  Register PMI memory entrypoints with processor. It is required
  by IPF. The PAL procedure supports the Stacked Registers
  calling convention. It could be called at physical mode.
 
  @param Index  Index of PAL_PMI_ENTRYPOINT within the list of
                PAL procedures.
  
  @param SalPmiEntry  256-byte aligned physical address of SAL
                      PMI entrypoint in memory.

              
  @return Status  0 - Call completed without error

  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.


**/
#define PAL_PMI_ENTRYPOINT 32


/**
   
  The ASCII brand identification string will be copied to the
  address specified in the address input argument. The processor
  brand identification string is defined to be a maximum of 128
  characters long; 127 bytes will contain characters and the 128th
  byte is defined to be NULL (0). A processor may return less than
  the 127 ASCII characters as long as the string is null
  terminated. The string length will be placed in the brand_info
  return argument.

**/
#define PAL_BRAND_INFO_ID_REQUEST  0 

/**
   
  PAL Procedure - PAL_BRAND_INFO.
  
  Provides processor branding information. It is optional by
  IPF. The PAL procedure supports the Stacked Registers calling
  convention. It could be called at physical and Virtual mode.


  @param Index  Index of PAL_BRAND_INFO within the list of PAL
                procedures.
  
  @param InfoRequest  Unsigned 64-bit integer specifying the
                      information that is being requested. (See
                      PAL_BRAND_INFO_ID_REQUEST)

  @param Address    Unsigned 64-bit integer specifying the
                    address of the 128-byte block to which the
                    processor brand string shall be written.


  @reture R9  Brand information returned. The format of this
              value is dependent on the input values passed.

              
  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

  @return Status  -6 - Input argument is not implemented.
  
**/
#define PAL_BRAND_INFO  274

/**
   
  PAL Procedure - PAL_GET_HW_POLICY.
  
  Returns the current hardware resource sharing policy of the
  processor. It is optional by IPF. The PAL procedure supports
  the Static Registers calling convention. It could be called at
  physical and Virtual mode.


  @param Index  Index of PAL_GET_HW_POLICY within the list of PAL
                procedures.
  
  @param ProcessorNumber  Unsigned 64-bit integer that specifies
                          for which logical processor
                          information is being requested. This
                          input argument must be zero for the
                          first call to this procedure and can
                          be a maximum value of one less than
                          the number of logical processors
                          impacted by the hardware resource
                          sharing policy, which is returned by
                          the R10 return value.


  @reture R9  Unsigned 64-bit integer representing the current
              hardware resource sharing policy.
  
  @return R10   Unsigned 64-bit integer that returns the number
                of logical processors impacted by the policy
                input argument.
  
  @return R11   Unsigned 64-bit integer containing the logical
                address of one of the logical processors
                impacted by policy modification.  
 
              
  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_GET_HW_POLICY   48


//
// Value of PAL_SET_HW_POLICY.Policy
// 
#define PAL_SET_HW_POLICY_PERFORMANCE               0
#define PAL_SET_HW_POLICY_FAIRNESS                  1
#define PAL_SET_HW_POLICY_HIGH_PRIORITY             2
#define PAL_SET_HW_POLICY_EXCLUSIVE_HIGH_PRIORITY   3

/**
   
  PAL Procedure - PAL_SET_HW_POLICY.
  
  Sets the current hardware resource sharing policy of the
  processor. It is optional by IPF. The PAL procedure supports
  the Static Registers calling convention. It could be called at
  physical and Virtual mode.


  @param Index  Index of PAL_SET_HW_POLICY within the list of PAL
                procedures.
  
  @param Policy   Unsigned 64-bit integer specifying the hardware
                  resource sharing policy the caller is setting.
                  See Value of PAL_SET_HW_POLICY.Policy above.

              
  @return Status  1 - Call completed successfully but could not
                      change the hardware policy since a
                      competing logical processor is set in
                      exclusive high priority.

  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.

  @return Status  -9 - Call requires PAL memory buffer.
   
**/
#define PAL_SET_HW_POLICY   49


/**

  @param Mode  Bit2:0, Indicates the mode of operation for this
               procedure: 0 - Query mode 1 ¨C Error inject mode
               (err_inj should also be specified) 2 - Cancel
               outstanding trigger. All other fields in
               PAL_MC_ERROR_TYPE_INFO,
               PAL_MC_ERROR_STRUCTURE_INFO and
               PAL_MC_ERROR_DATA_BUFFER are ignored. All other
               values are reserved.

  @param ErrorInjection   Bit5:3, indicates the mode of error
                          injection: 0 - Error inject only (no
                          error consumption) 1 - Error inject
                          and consume All other values are
                          reserved.


  @param ErrorSeverity    Bit7:6, indicates the severity desired
                          for error injection/query. Definitions
                          of the different error severity types
                          0 - Corrected error 1 - Recoverable
                          error 2 - Fatal error 3 - Reserved


  @param ErrorStructure   Bit12:8, Indicates the structure
                          identification for error
                          injection/query: 0 - Any structure
                          (cannot be used during query mode).
                          When selected, the structure type used
                          for error injection is determined by
                          PAL. 1 - Cache 2 - TLB 3 - Register
                          file 4 - Bus/System interconnect 5-15
                          - Reserved 16-31 - Processor
                          specific error injection
                          capabilities.ErrorDataBuffer is used
                          to specify error types. Please refer
                          to the processor specific
                          documentation for additional details.

  @param StructureHierarchy   Bit15:13, Indicates the structure
                              hierarchy for error
                              injection/query: 0 - Any level of
                              hierarchy (cannot be used during
                              query mode). When selected, the
                              structure hierarchy used for error
                              injection is determined by PAL. 1
                              - Error structure hierarchy
                              level-1 2 - Error structure
                              hierarchy level-2 3 - Error
                              structure hierarchy level-3 4 -
                              Error structure hierarchy level-4
                              All other values are reserved.
                              Reserved 63:16 Reserved

**/
typedef struct {
  UINT64  Mode:3;
  UINT64  ErrorInjection:3;
  UINT64  ErrorSeverity:2;
  UINT64  ErrorStructure:5;
  UINT64  StructureHierarchy:3;
  UINT64  Reserved:48;
} PAL_MC_ERROR_TYPE_INFO;

/**
   
  @param StructInfoIsValid  Bit0 When 1, indicates that the
                            structure information fields
                            (c_t,cl_p,cl_id) are valid and
                            should be used for error injection.
                            When 0, the structure information
                            fields are ignored, and the values
                            of these fields used for error
                            injection are
                            implementation-specific.

  @param CacheType  Bit2:1  Indicates which cache should be used
                    for error injection: 0 - Reserved 1 -
                    Instruction cache 2 - Data or unified cache
                    3 - Reserved


  @param PortionOfCacheLine   Bit5:3 Indicates the portion of the
                              cache line where the error should
                              be injected: 0 - Reserved 1 - Tag
                              2 - Data 3 - mesi All other
                              values are reserved.

  @param Mechanism  Bit8:6 Indicates which mechanism is used to
                    identify the cache line to be used for error
                    injection: 0 - Reserved 1 - Virtual address
                    provided in the inj_addr field of the buffer
                    pointed to by err_data_buffer should be used
                    to identify the cache line for error
                    injection. 2 - Physical address provided in
                    the inj_addr field of the buffer pointed to
                    by err_data_buffershould be used to identify
                    the cache line for error injection. 3 - way
                    and index fields provided in err_data_buffer
                    should be used to identify the cache line
                    for error injection. All other values are
                    reserved.

  @param DataPoisonOfCacheLine  Bit9 When 1, indicates that a
                                multiple bit, non-correctable
                                error should be injected in the
                                cache line specified by cl_id.
                                If this injected error is not
                                consumed, it may eventually
                                cause a data-poisoning event
                                resulting in a corrected error
                                signal, when the associated
                                cache line is cast out (implicit
                                or explicit write-back of the
                                cache line). The error severity
                                specified by err_sev in
                                err_type_info must be set to 0
                                (corrected error) when this bit
                                is set.

  
  @param TrigerInfoIsValid  Bit32 When 1, indicates that the
                            trigger information fields (trigger,
                            trigger_pl) are valid and should be
                            used for error injection. When 0,
                            the trigger information fields are
                            ignored and error injection is
                            performed immediately.

  @param Triger   Bit36:33 Indicates the operation type to be
                  used as the error trigger condition. The
                  address corresponding to the trigger is
                  specified in the trigger_addr field of the
                  buffer pointed to by err_data_buffer: 0 -
                  Instruction memory access. The trigger match
                  conditions for this operation type are similar
                  to the IBR address breakpoint match conditions
                  1 - Data memory access. The trigger match
                  conditions for this operation type are similar
                  to the DBR address breakpoint match conditions
                  All other values are reserved.

  @param PrivilegeOfTriger  Bit39:37  Indicates the privilege
                            level of the context during which
                            the error should be injected: 0 -
                            privilege level 0 1 - privilege
                            level 1 2 - privilege level 2 3 -
                            privilege level 3 All other values
                            are reserved. If the implementation
                            does not support privilege level
                            qualifier for triggers (i.e. if
                            trigger_pl is 0 in the capabilities
                            vector), this field is ignored and
                            triggers can be taken at any
                            privilege level.

**/
typedef struct {
  UINT64  StructInfoIsValid:1;
  UINT64  CacheType:2;
  UINT64  PortionOfCacheLine:3;
  UINT64  Mechanism:3;
  UINT64  DataPoisonOfCacheLine:1;
  UINT64  Reserved1:22;
  UINT64  TrigerInfoIsValid:1;
  UINT64  Triger:4;
  UINT64  PrivilegeOfTriger:3;
  UINT64  Reserved2:24;
} PAL_MC_ERROR_STRUCT_INFO;

/**
   
   Buffer Pointed to by err_data_buffer ¨C TLB
   
**/
typedef struct {
  UINT64  TrigerAddress;
  UINT64  VirtualPageNumber:52;
  UINT64  Reserved1:8;
  UINT64  RegionId:24;
  UINT64  Reserved2:40;
} PAL_MC_ERROR_DATA_BUFFER_TLB;

/**
   
  PAL Procedure - PAL_MC_ERROR_INJECT.
  
  Injects the requested processor error or returns information
  on the supported injection capabilities for this particular
  processor implementation. It is optional by IPF. The PAL
  procedure supports the Stacked Registers calling convention.
  It could be called at physical and Virtual mode.


  @param Index  Index of PAL_MC_ERROR_INJECT within the list of PAL
                procedures.
  
  @param ErrorTypeInfo  Unsigned 64-bit integer specifying the
                        first level error information which
                        identifies the error structure and
                        corresponding structure hierarchy, and
                        the error severity.

  @param ErrorStructInfo  Unsigned 64-bit integer identifying
                          the optional structure specific
                          information that provides the  second
                          level details for the requested error.

  @param ErrorDataBuffer  64-bit physical address of a buffer
                          providing additional parameters for
                          the requested error. The address of
                          this buffer must be 8-byte aligned.
  
  @return R9    64-bit vector specifying the supported error
                injection capabilities for the input argument
                combination of struct_hier, err_struct and
                err_sev fields in ErrorTypeInfo.
  
  @return R10   64-bit vector specifying the architectural
                resources that are used by the procedure.
  
              
  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -4 - Call completed with error; the requested
                  error could not be injected due to failure in
                  locating the target location in the specified
                  structure.
  
  @return Status  -5 - Argument was valid, but requested error
                  injection capability is not supported.

  @return Status  -9 - Call requires PAL memory buffer.

**/
#define PAL_MC_ERROR_INJECT 276


//
// Types of PAL_GET_PSTATE.Type
// 
#define PAL_GET_PSTATE_RECENT                 0
#define PAL_GET_PSTATE_AVERAGE_NEW_START      1
#define PAL_GET_PSTATE_AVERAGE                2
#define PAL_GET_PSTATE_NOW                    3

/**
   
  PAL Procedure - PAL_GET_PSTATE.
  
  Returns the performance index of the processor. It is optional
  by IPF. The PAL procedure supports the Stacked Registers
  calling convention. It could be called at physical and Virtual
  mode.


  @param Index  Index of PAL_GET_PSTATE within the list of PAL
                procedures.
  
  @param Type   Type of performance_index value to be returned
                by this procedure.See PAL_GET_PSTATE.Type above.

  
  @return R9    Unsigned integer denoting the processor
                performance for the time duration since the last
                PAL_GET_PSTATE procedure call was made. The
                value returned is between 0 and 100, and is
                relative to the performance index of the highest
                available P-state.
  
  @return Status  1 - Call completed without error, but accuracy
                  of performance index has been impacted by a
                  thermal throttling event, or a
                  hardware-initiated event.
              
  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_GET_PSTATE      262

/**
 
  Layout of PAL_PSTATE_INFO.PStateBuffer
 
**/
typedef struct {
  UINT32  PerformanceIndex:7;
  UINT32  Reserved1:5;
  UINT32  TypicalPowerDissipation:20;
  UINT32  TransitionLatency1;
  UINT32  TransitionLatency2;
  UINT32  Reserved2;
} PAL_PSTATE_INFO_BUFFER;


/**
  
  PAL Procedure - PAL_PSTATE_INFO.
  
  Returns information about the P-states supported by the
  processor. It is optional by IPF. The PAL procedure supports
  the Static Registers calling convention. It could be called
  at physical and Virtual mode.


  @param Index  Index of PAL_PSTATE_INFO within the list of PAL
                procedures.
  
  @param PStateBuffer   64-bit pointer to a 256-byte buffer
                        aligned on an 8-byte boundary. See
                        PAL_PSTATE_INFO_BUFFER above.

  
  @return R9    Unsigned integer denoting the number of P-states
                supported. The maximum value of this field is 16.

  @return R10   Dependency domain information

              
  @return Status  0 - Call completed without error

  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
**/
#define PAL_PSTATE_INFO     44


/**
   
  PAL Procedure - PAL_SET_PSTATE.
  
  To request a processor transition to a given P-state. It is
  optional by IPF. The PAL procedure supports the Stacked
  Registers calling convention. It could be called at physical
  and Virtual mode.


  @param Index  Index of PAL_SET_PSTATE within the list of PAL
                procedures.
  
  @param PState   Unsigned integer denoting the processor
                  P-state being requested.
  
  @param ForcePState  Unsigned integer denoting whether the
                      P-state change should be forced for the
                      logical processor.



  
              
  @return Status  1 - Call completed without error, but
                  transition request was not accepted
              
  @return Status  0 - Call completed without error
              
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_SET_PSTATE      263

/**
   
  PAL Procedure - PAL_SHUTDOWN.
  
  Put the logical processor into a low power state which can be
  exited only by a reset event. It is optional by IPF. The PAL
  procedure supports the Static Registers calling convention. It
  could be called at physical mode.


  @param Index  Index of PAL_SHUTDOWN within the list of PAL
                procedures.
  
  @param NotifyPlatform   8-byte aligned physical address
                          pointer providing details on how to
                          optionally notify the platform that
                          the processor is entering a shutdown
                          state.
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_SHUTDOWN        45

/**

  Layout of PAL_MEMORY_BUFFER.ControlWord
  
**/
typedef struct {
  UINT64  Registration:1;
  UINT64  ProbeInterrupt:1;
  UINT64  Reserved:62;
} PAL_MEMORY_CONTROL_WORD;

/**
   
  PAL Procedure - PAL_MEMORY_BUFFER.
  
  Provides cacheable memory to PAL for exclusive use during
  runtime. It is optional by IPF. The PAL procedure supports the
  Static Registers calling convention. It could be called at
  physical mode.


  @param Index  Index of PAL_MEMORY_BUFFER within the list of PAL
                procedures.
  
  @param BaseAddress  Physical address of the memory buffer
                      allocated for PAL use.
  
  @param AllocSize  Unsigned integer denoting the size of the
                    memory buffer.
  
  @param ControlWord  Formatted bit vector that provides control
                      options for this procedure. See
                      PAL_MEMORY_CONTROL_WORD above.
  
  @return R9    Returns the minimum size of the memory buffer
                required if the alloc_size input argument was
                not large enough.
  
  @return Status  1 - Call has not completed a buffer relocation
                  due to a pending interrupt
  
  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_MEMORY_BUFFER   277


/**
   
  PAL Procedure - PAL_VP_CREATE.
  
  Initializes a new vpd for the operation of a new virtual
  processor in the virtual environment. It is optional by IPF.
  The PAL procedure supports the Stacked Registers calling
  convention. It could be called at Virtual mode.


  @param Index  Index of PAL_VP_CREATE within the list of PAL
                procedures.
  
  @param Vpd    64-bit host virtual pointer to the Virtual
                Processor Descriptor (VPD).

  @param HostIva  64-bit host virtual pointer to the host IVT
                  for the virtual processor

  @param OptionalHandler  64-bit non-zero host-virtual pointer
                          to an optional handler for
                          virtualization intercepts.
  

  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_CREATE       265

/**
   
  Virtual Environment Information Parameter 
   
**/
typedef struct {
  UINT64    Reserved1:8;
  UINT64    Opcode:1;
  UINT64    Reserved:53;
} PAL_VP_ENV_INFO_RETURN;

/**
   
  PAL Procedure - PAL_VP_ENV_INFO.
  
  Returns the parameters needed to enter a virtual environment.
  It is optional by IPF. The PAL procedure supports the Stacked
  Registers calling convention. It could be called at Virtual
  mode.


  @param Index  Index of PAL_VP_ENV_INFO within the list of PAL
                procedures.
  
  @param Vpd    64-bit host virtual pointer to the Virtual
                Processor Descriptor (VPD).

  @param HostIva  64-bit host virtual pointer to the host IVT
                  for the virtual processor

  @param OptionalHandler  64-bit non-zero host-virtual pointer
                          to an optional handler for
                          virtualization intercepts.
  @return R9    Unsigned integer denoting the number of bytes
                required by the PAL virtual environment buffer
                during PAL_VP_INIT_ENV
  
  @return R10   64-bit vector of virtual environment
                information. See PAL_VP_ENV_INFO_RETURN.
  

  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_ENV_INFO       266

/**
   
  PAL Procedure - PAL_VP_EXIT_ENV.
  
  Allows a logical processor to exit a virtual environment. 
  It is optional by IPF. The PAL procedure supports the Stacked
  Registers calling convention. It could be called at Virtual
  mode.


  @param Index  Index of PAL_VP_EXIT_ENV within the list of PAL
                procedures.
  
  @param Iva    Optional 64-bit host virtual pointer to the IVT
                when this procedure is done

  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_EXIT_ENV       267



/**
   
  PAL Procedure - PAL_VP_INIT_ENV.
  
  Allows a logical processor to enter a virtual environment. It
  is optional by IPF. The PAL procedure supports the Stacked
  Registers calling convention. It could be called at Virtual
  mode.


  @param Index  Index of PAL_VP_INIT_ENV within the list of PAL
                procedures.
  
  @param ConfigOptions  64-bit vector of global configuration
                        settings.

  @param PhysicalBase   Host physical base address of a block of
                        contiguous physical memory for the PAL
                        virtual environment buffer 1) This
                        memory area must be allocated by the VMM
                        and be 4K aligned. The first logical
                        processor to enter the environment will
                        initialize the physical block for
                        virtualization operations.

  @param VirtualBase  Host virtual base address of the
                      corresponding physical memory block for
                      the PAL virtual environment buffer : The
                      VMM must maintain the host virtual to host
                      physical data and instruction translations
                      in TRs for addresses within the allocated
                      address space. Logical processors in this
                      virtual environment will use this address
                      when transitioning to virtual mode
                      operations.

  @return R9    Virtualization Service Address ¨C VSA specifies
                the virtual base address of the PAL
                virtualization services in this virtual
                environment.
  

  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_INIT_ENV       268


/**
   
  PAL Procedure - PAL_VP_REGISTER.
  
  Register a different host IVT and/or a different optional
  virtualization intercept handler for the virtual processor
  specified by vpd. It is optional by IPF. The PAL procedure
  supports the Stacked Registers calling convention. It could be
  called at Virtual mode.


  @param Index  Index of PAL_VP_REGISTER within the list of PAL
                procedures.
  
  @param Vpd    64-bit host virtual pointer to the Virtual
                Processor Descriptor (VPD) host_iva 64-bit host
                virtual pointer to the host IVT for the virtual
                processor

  @param OptionalHandler  64-bit non-zero host-virtual pointer
                          to an optional handler for
                          virtualization intercepts.


  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_REGISTER       269


/**
   
  PAL Procedure - PAL_VP_RESTORE.
  
  Restores virtual processor state for the specified vpd on the
  logical processor. It is optional by IPF. The PAL procedure
  supports the Stacked Registers calling convention. It could be
  called at Virtual mode.


  @param Index  Index of PAL_VP_RESTORE within the list of PAL
                procedures.
  
  @param Vpd    64-bit host virtual pointer to the Virtual
                Processor Descriptor (VPD) host_iva 64-bit host
                virtual pointer to the host IVT for the virtual
                processor

  @param PalVector  Vector specifies PAL procedure
                    implementation-specific state to be
                    restored.


  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_RESTORE       270

/**
   
  PAL Procedure - PAL_VP_SAVE.
  
  Saves virtual processor state for the specified vpd on the
  logical processor. It is optional by IPF. The PAL procedure
  supports the Stacked Registers calling convention. It could be
  called at Virtual mode.


  @param Index  Index of PAL_VP_SAVE within the list of PAL
                procedures.
  
  @param Vpd    64-bit host virtual pointer to the Virtual
                Processor Descriptor (VPD) host_iva 64-bit host
                virtual pointer to the host IVT for the virtual
                processor

  @param PalVector  Vector specifies PAL procedure
                    implementation-specific state to be
                    restored.


  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_SAVE       271


/**
   
  PAL Procedure - PAL_VP_TERMINATE.
  
  Terminates operation for the specified virtual processor. It
  is optional by IPF. The PAL procedure supports the Stacked
  Registers calling convention. It could be called at Virtual
  mode.


  @param Index  Index of PAL_VP_TERMINATE within the list of PAL
                procedures.
  
  @param Vpd  64-bit host virtual pointer to the Virtual
              Processor Descriptor (VPD)
  
  @param Iva  Optional 64-bit host virtual pointer to the IVT
              when this procedure is done.

  @return Status  0 - Call completed without error
  
  @return Status  -1 - Unimplemented procedure
  
  @return Status  -2 - Invalid argument
  
  @return Status  -3 - Call completed with error.
  
  @return Status  -9 - Call requires PAL memory buffer.
  
**/
#define PAL_VP_TERMINATE       272

/**
  Makes a PAL procedure call.

  This is a wrapper function to make a PAL procedure call.  Based on the Index value,
  this API will make static or stacked PAL call. Architected procedures may be designated
  as required or optional.  If a PAL procedure is specified as optional, a unique return
  code of 0xFFFFFFFFFFFFFFFF is returned in the Status field of the PAL_CALL_RETURN structure.
  This indicates that the procedure is not present in this PAL implementation.  It is the
  caller¡¯s responsibility to check for this return code after calling any optional PAL
  procedure. No parameter checking is performed on the 4 input parameters, but there are
  some common rules that the caller should follow when making a PAL call.  Any address
  passed to PAL as buffers for return parameters must be 8-byte aligned.  Unaligned addresses
  may cause undefined results.  For those parameters defined as reserved or some fields
  defined as reserved must be zero filled or the invalid argument return value may be
  returned or undefined result may occur during the execution of the procedure.
  This function is only available on IPF.

  @param Index - The PAL procedure Index number.
  @param Arg2  - The 2nd parameter for PAL procedure calls.
  @param Arg3  - The 3rd parameter for PAL procedure calls.
  @param Arg4  - The 4th parameter for PAL procedure calls.

  @return structure returned from the PAL Call procedure, including the status and return value.

**/
PAL_CALL_RETURN
EFIAPI
PalCall (
  IN UINT64                  Index,
  IN UINT64                  Arg2,
  IN UINT64                  Arg3,
  IN UINT64                  Arg4
  );

#endif