summaryrefslogtreecommitdiff
path: root/src/mem
diff options
context:
space:
mode:
Diffstat (limited to 'src/mem')
-rw-r--r--src/mem/SConscript3
-rw-r--r--src/mem/SerialLink.py63
-rw-r--r--src/mem/serial_link.cc437
-rw-r--r--src/mem/serial_link.hh329
4 files changed, 832 insertions, 0 deletions
diff --git a/src/mem/SConscript b/src/mem/SConscript
index 3b65131a2..1d3249918 100644
--- a/src/mem/SConscript
+++ b/src/mem/SConscript
@@ -43,6 +43,7 @@ SimObject('MemObject.py')
SimObject('SimpleMemory.py')
SimObject('XBar.py')
SimObject('HMCController.py')
+SimObject('SerialLink.py')
Source('abstract_mem.cc')
Source('addr_mapper.cc')
@@ -66,6 +67,7 @@ Source('stack_dist_calc.cc')
Source('tport.cc')
Source('xbar.cc')
Source('hmc_controller.cc')
+Source('serial_link.cc')
if env['TARGET_ISA'] != 'null':
Source('fs_translating_port_proxy.cc')
@@ -104,6 +106,7 @@ DebugFlag('PacketQueue')
DebugFlag('StackDist')
DebugFlag("DRAMSim2")
DebugFlag('HMCController')
+DebugFlag('SerialLink')
DebugFlag("MemChecker")
DebugFlag("MemCheckerMonitor")
diff --git a/src/mem/SerialLink.py b/src/mem/SerialLink.py
new file mode 100644
index 000000000..f05f2872d
--- /dev/null
+++ b/src/mem/SerialLink.py
@@ -0,0 +1,63 @@
+# Copyright (c) 2012-2013 ARM Limited
+# All rights reserved.
+#
+# The license below extends only to copyright in the software and shall
+# not be construed as granting a license to any other intellectual
+# property including but not limited to intellectual property relating
+# to a hardware implementation of the functionality of the software
+# licensed hereunder. You may use the software subject to the license
+# terms below provided that you ensure that this notice is replicated
+# unmodified and in its entirety in all distributions of the software,
+# modified or unmodified, in source code or in binary form.
+#
+# Copyright (c) 2006-2007 The Regents of The University of Michigan
+# Copyright (c) 2015 The University of Bologna
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Ali Saidi
+# Andreas Hansson
+# Erfan Azarkhish
+
+from m5.params import *
+from MemObject import MemObject
+
+# SerialLink is a simple variation of the Bridge class, with the ability to
+# account for the latency of packet serialization.
+
+class SerialLink(MemObject):
+ type = 'SerialLink'
+ cxx_header = "mem/serial_link.hh"
+ slave = SlavePort('Slave port')
+ master = MasterPort('Master port')
+ req_size = Param.Unsigned(16, "The number of requests to buffer")
+ resp_size = Param.Unsigned(16, "The number of responses to buffer")
+ delay = Param.Latency('0ns', "The latency of this serial_link")
+ ranges = VectorParam.AddrRange([AllMemory],
+ "Address ranges to pass through the serial_link")
+ # Bandwidth of the serial link is determined by the clock domain which the
+ # link belongs to and the number of lanes:
+ num_lanes = Param.Unsigned(1, "Number of parallel lanes inside the serial"
+ "link. (aka. lane width)")
diff --git a/src/mem/serial_link.cc b/src/mem/serial_link.cc
new file mode 100644
index 000000000..577339bb8
--- /dev/null
+++ b/src/mem/serial_link.cc
@@ -0,0 +1,437 @@
+/*
+ * Copyright (c) 2011-2013 ARM Limited
+ * All rights reserved
+ *
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
+ *
+ * Copyright (c) 2006 The Regents of The University of Michigan
+ * Copyright (c) 2015 The University of Bologna
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ * redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution;
+ * neither the name of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Authors: Ali Saidi
+ * Steve Reinhardt
+ * Andreas Hansson
+ * Erfan Azarkhish
+ */
+
+/**
+ * @file
+ * Implementation of the SerialLink Class, modeling Hybrid-Memory-Cube's
+ * serial interface.
+ */
+
+#include "mem/serial_link.hh"
+
+#include "base/trace.hh"
+#include "debug/SerialLink.hh"
+#include "params/SerialLink.hh"
+
+
+SerialLink::SerialLinkSlavePort::SerialLinkSlavePort(const std::string& _name,
+ SerialLink& _serial_link,
+ SerialLinkMasterPort& _masterPort,
+ Cycles _delay, int _resp_limit,
+ const std::vector<AddrRange>&
+ _ranges)
+ : SlavePort(_name, &_serial_link), serial_link(_serial_link),
+ masterPort(_masterPort), delay(_delay),
+ ranges(_ranges.begin(), _ranges.end()),
+ outstandingResponses(0), retryReq(false),
+ respQueueLimit(_resp_limit), sendEvent(*this)
+{
+}
+
+SerialLink::SerialLinkMasterPort::SerialLinkMasterPort(const std::string&
+ _name, SerialLink& _serial_link,
+ SerialLinkSlavePort& _slavePort,
+ Cycles _delay, int _req_limit)
+ : MasterPort(_name, &_serial_link), serial_link(_serial_link),
+ slavePort(_slavePort), delay(_delay), reqQueueLimit(_req_limit),
+ sendEvent(*this)
+{
+}
+
+SerialLink::SerialLink(SerialLinkParams *p)
+ : MemObject(p),
+ slavePort(p->name + ".slave", *this, masterPort,
+ ticksToCycles(p->delay), p->resp_size, p->ranges),
+ masterPort(p->name + ".master", *this, slavePort,
+ ticksToCycles(p->delay), p->req_size),
+ num_lanes(p->num_lanes)
+{
+}
+
+BaseMasterPort&
+SerialLink::getMasterPort(const std::string &if_name, PortID idx)
+{
+ if (if_name == "master")
+ return masterPort;
+ else
+ // pass it along to our super class
+ return MemObject::getMasterPort(if_name, idx);
+}
+
+BaseSlavePort&
+SerialLink::getSlavePort(const std::string &if_name, PortID idx)
+{
+ if (if_name == "slave")
+ return slavePort;
+ else
+ // pass it along to our super class
+ return MemObject::getSlavePort(if_name, idx);
+}
+
+void
+SerialLink::init()
+{
+ // make sure both sides are connected and have the same block size
+ if (!slavePort.isConnected() || !masterPort.isConnected())
+ fatal("Both ports of a serial_link must be connected.\n");
+
+ // notify the master side of our address ranges
+ slavePort.sendRangeChange();
+}
+
+bool
+SerialLink::SerialLinkSlavePort::respQueueFull() const
+{
+ return outstandingResponses == respQueueLimit;
+}
+
+bool
+SerialLink::SerialLinkMasterPort::reqQueueFull() const
+{
+ return transmitList.size() == reqQueueLimit;
+}
+
+bool
+SerialLink::SerialLinkMasterPort::recvTimingResp(PacketPtr pkt)
+{
+ // all checks are done when the request is accepted on the slave
+ // side, so we are guaranteed to have space for the response
+ DPRINTF(SerialLink, "recvTimingResp: %s addr 0x%x\n",
+ pkt->cmdString(), pkt->getAddr());
+
+ DPRINTF(SerialLink, "Request queue size: %d\n", transmitList.size());
+
+ // @todo: We need to pay for this and not just zero it out
+ pkt->headerDelay = pkt->payloadDelay = 0;
+
+ // This is similar to what happens for the request packets:
+ // The serializer will start serialization as soon as it receives the
+ // first flit, but the deserializer (at the host side in this case), will
+ // have to wait to receive the whole packet. So we only account for the
+ // deserialization latency.
+ Cycles cycles = delay;
+ cycles += Cycles(divCeil(pkt->getSize() * 8, serial_link.num_lanes));
+ Tick t = serial_link.clockEdge(cycles);
+
+ //@todo: If the processor sends two uncached requests towards HMC and the
+ // second one is smaller than the first one. It may happen that the second
+ // one crosses this link faster than the first one (because the packet
+ // waits in the link based on its size). This can reorder the received
+ // response.
+ slavePort.schedTimingResp(pkt, t);
+
+ return true;
+}
+
+bool
+SerialLink::SerialLinkSlavePort::recvTimingReq(PacketPtr pkt)
+{
+ DPRINTF(SerialLink, "recvTimingReq: %s addr 0x%x\n",
+ pkt->cmdString(), pkt->getAddr());
+
+ // we should not see a timing request if we are already in a retry
+ assert(!retryReq);
+
+ DPRINTF(SerialLink, "Response queue size: %d outresp: %d\n",
+ transmitList.size(), outstandingResponses);
+
+ // if the request queue is full then there is no hope
+ if (masterPort.reqQueueFull()) {
+ DPRINTF(SerialLink, "Request queue full\n");
+ retryReq = true;
+ } else if ( !retryReq ) {
+ // look at the response queue if we expect to see a response
+ bool expects_response = pkt->needsResponse() &&
+ !pkt->memInhibitAsserted();
+ if (expects_response) {
+ if (respQueueFull()) {
+ DPRINTF(SerialLink, "Response queue full\n");
+ retryReq = true;
+ } else {
+ // ok to send the request with space for the response
+ DPRINTF(SerialLink, "Reserving space for response\n");
+ assert(outstandingResponses != respQueueLimit);
+ ++outstandingResponses;
+
+ // no need to set retryReq to false as this is already the
+ // case
+ }
+ }
+
+ if (!retryReq) {
+ // @todo: We need to pay for this and not just zero it out
+ pkt->headerDelay = pkt->payloadDelay = 0;
+
+ // We assume that the serializer component at the transmitter side
+ // does not need to receive the whole packet to start the
+ // serialization (this assumption is consistent with the HMC
+ // standard). But the deserializer waits for the complete packet
+ // to check its integrity first. So everytime a packet crosses a
+ // serial link, we should account for its deserialization latency
+ // only.
+ Cycles cycles = delay;
+ cycles += Cycles(divCeil(pkt->getSize() * 8,
+ serial_link.num_lanes));
+ Tick t = serial_link.clockEdge(cycles);
+
+ //@todo: If the processor sends two uncached requests towards HMC
+ // and the second one is smaller than the first one. It may happen
+ // that the second one crosses this link faster than the first one
+ // (because the packet waits in the link based on its size).
+ // This can reorder the received response.
+ masterPort.schedTimingReq(pkt, t);
+ }
+ }
+
+ // remember that we are now stalling a packet and that we have to
+ // tell the sending master to retry once space becomes available,
+ // we make no distinction whether the stalling is due to the
+ // request queue or response queue being full
+ return !retryReq;
+}
+
+void
+SerialLink::SerialLinkSlavePort::retryStalledReq()
+{
+ if (retryReq) {
+ DPRINTF(SerialLink, "Request waiting for retry, now retrying\n");
+ retryReq = false;
+ sendRetryReq();
+ }
+}
+
+void
+SerialLink::SerialLinkMasterPort::schedTimingReq(PacketPtr pkt, Tick when)
+{
+ // If we're about to put this packet at the head of the queue, we
+ // need to schedule an event to do the transmit. Otherwise there
+ // should already be an event scheduled for sending the head
+ // packet.
+ if (transmitList.empty()) {
+ serial_link.schedule(sendEvent, when);
+ }
+
+ assert(transmitList.size() != reqQueueLimit);
+
+ transmitList.emplace_back(DeferredPacket(pkt, when));
+}
+
+
+void
+SerialLink::SerialLinkSlavePort::schedTimingResp(PacketPtr pkt, Tick when)
+{
+ // If we're about to put this packet at the head of the queue, we
+ // need to schedule an event to do the transmit. Otherwise there
+ // should already be an event scheduled for sending the head
+ // packet.
+ if (transmitList.empty()) {
+ serial_link.schedule(sendEvent, when);
+ }
+
+ transmitList.emplace_back(DeferredPacket(pkt, when));
+}
+
+void
+SerialLink::SerialLinkMasterPort::trySendTiming()
+{
+ assert(!transmitList.empty());
+
+ DeferredPacket req = transmitList.front();
+
+ assert(req.tick <= curTick());
+
+ PacketPtr pkt = req.pkt;
+
+ DPRINTF(SerialLink, "trySend request addr 0x%x, queue size %d\n",
+ pkt->getAddr(), transmitList.size());
+
+ if (sendTimingReq(pkt)) {
+ // send successful
+ transmitList.pop_front();
+
+ DPRINTF(SerialLink, "trySend request successful\n");
+
+ // If there are more packets to send, schedule event to try again.
+ if (!transmitList.empty()) {
+ DeferredPacket next_req = transmitList.front();
+ DPRINTF(SerialLink, "Scheduling next send\n");
+
+ // Make sure bandwidth limitation is met
+ Cycles cycles = Cycles(divCeil(pkt->getSize() * 8,
+ serial_link.num_lanes));
+ Tick t = serial_link.clockEdge(cycles);
+ serial_link.schedule(sendEvent, std::max(next_req.tick, t));
+ }
+
+ // if we have stalled a request due to a full request queue,
+ // then send a retry at this point, also note that if the
+ // request we stalled was waiting for the response queue
+ // rather than the request queue we might stall it again
+ slavePort.retryStalledReq();
+ }
+
+ // if the send failed, then we try again once we receive a retry,
+ // and therefore there is no need to take any action
+}
+
+void
+SerialLink::SerialLinkSlavePort::trySendTiming()
+{
+ assert(!transmitList.empty());
+
+ DeferredPacket resp = transmitList.front();
+
+ assert(resp.tick <= curTick());
+
+ PacketPtr pkt = resp.pkt;
+
+ DPRINTF(SerialLink, "trySend response addr 0x%x, outstanding %d\n",
+ pkt->getAddr(), outstandingResponses);
+
+ if (sendTimingResp(pkt)) {
+ // send successful
+ transmitList.pop_front();
+ DPRINTF(SerialLink, "trySend response successful\n");
+
+ assert(outstandingResponses != 0);
+ --outstandingResponses;
+
+ // If there are more packets to send, schedule event to try again.
+ if (!transmitList.empty()) {
+ DeferredPacket next_resp = transmitList.front();
+ DPRINTF(SerialLink, "Scheduling next send\n");
+
+ // Make sure bandwidth limitation is met
+ Cycles cycles = Cycles(divCeil(pkt->getSize() * 8,
+ serial_link.num_lanes));
+ Tick t = serial_link.clockEdge(cycles);
+ serial_link.schedule(sendEvent, std::max(next_resp.tick, t));
+ }
+
+ // if there is space in the request queue and we were stalling
+ // a request, it will definitely be possible to accept it now
+ // since there is guaranteed space in the response queue
+ if (!masterPort.reqQueueFull() && retryReq) {
+ DPRINTF(SerialLink, "Request waiting for retry, now retrying\n");
+ retryReq = false;
+ sendRetryReq();
+ }
+ }
+
+ // if the send failed, then we try again once we receive a retry,
+ // and therefore there is no need to take any action
+}
+
+void
+SerialLink::SerialLinkMasterPort::recvReqRetry()
+{
+ trySendTiming();
+}
+
+void
+SerialLink::SerialLinkSlavePort::recvRespRetry()
+{
+ trySendTiming();
+}
+
+Tick
+SerialLink::SerialLinkSlavePort::recvAtomic(PacketPtr pkt)
+{
+ return delay * serial_link.clockPeriod() + masterPort.sendAtomic(pkt);
+}
+
+void
+SerialLink::SerialLinkSlavePort::recvFunctional(PacketPtr pkt)
+{
+ pkt->pushLabel(name());
+
+ // check the response queue
+ for (auto i = transmitList.begin(); i != transmitList.end(); ++i) {
+ if (pkt->checkFunctional((*i).pkt)) {
+ pkt->makeResponse();
+ return;
+ }
+ }
+
+ // also check the master port's request queue
+ if (masterPort.checkFunctional(pkt)) {
+ return;
+ }
+
+ pkt->popLabel();
+
+ // fall through if pkt still not satisfied
+ masterPort.sendFunctional(pkt);
+}
+
+bool
+SerialLink::SerialLinkMasterPort::checkFunctional(PacketPtr pkt)
+{
+ bool found = false;
+ auto i = transmitList.begin();
+
+ while(i != transmitList.end() && !found) {
+ if (pkt->checkFunctional((*i).pkt)) {
+ pkt->makeResponse();
+ found = true;
+ }
+ ++i;
+ }
+
+ return found;
+}
+
+AddrRangeList
+SerialLink::SerialLinkSlavePort::getAddrRanges() const
+{
+ return ranges;
+}
+
+SerialLink *
+SerialLinkParams::create()
+{
+ return new SerialLink(this);
+}
diff --git a/src/mem/serial_link.hh b/src/mem/serial_link.hh
new file mode 100644
index 000000000..d4f6ca488
--- /dev/null
+++ b/src/mem/serial_link.hh
@@ -0,0 +1,329 @@
+/*
+ * Copyright (c) 2011-2013 ARM Limited
+ * All rights reserved
+ *
+ * The license below extends only to copyright in the software and shall
+ * not be construed as granting a license to any other intellectual
+ * property including but not limited to intellectual property relating
+ * to a hardware implementation of the functionality of the software
+ * licensed hereunder. You may use the software subject to the license
+ * terms below provided that you ensure that this notice is replicated
+ * unmodified and in its entirety in all distributions of the software,
+ * modified or unmodified, in source code or in binary form.
+ *
+ * Copyright (c) 2006 The Regents of The University of Michigan
+ * Copyright (c) 2015 The University of Bologna
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ * redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution;
+ * neither the name of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Authors: Ali Saidi
+ * Steve Reinhardt
+ * Andreas Hansson
+ * Erfan Azarkhish
+ */
+
+/**
+ * @file
+ * Declaration of the SerialLink Class, modeling Hybrid-Memory-Cube's serial
+ * interface.
+ */
+
+#ifndef __MEM_SERIAL_LINK_HH__
+#define __MEM_SERIAL_LINK_HH__
+
+#include <deque>
+
+#include "base/types.hh"
+#include "mem/mem_object.hh"
+#include "params/SerialLink.hh"
+
+/**
+ * SerialLink is a simple variation of the Bridge class, with the ability to
+ * account for the latency of packet serialization. We assume that the
+ * serializer component at the transmitter side does not need to receive the
+ * whole packet to start the serialization. But the deserializer waits for the
+ * complete packet to check its integrity first.
+ */
+class SerialLink : public MemObject
+{
+ protected:
+
+ /**
+ * A deferred packet stores a packet along with its scheduled
+ * transmission time
+ */
+ class DeferredPacket
+ {
+
+ public:
+
+ const Tick tick;
+ const PacketPtr pkt;
+
+ DeferredPacket(PacketPtr _pkt, Tick _tick) : tick(_tick), pkt(_pkt)
+ { }
+ };
+
+ // Forward declaration to allow the slave port to have a pointer
+ class SerialLinkMasterPort;
+
+ /**
+ * The port on the side that receives requests and sends
+ * responses. The slave port has a set of address ranges that it
+ * is responsible for. The slave port also has a buffer for the
+ * responses not yet sent.
+ */
+ class SerialLinkSlavePort : public SlavePort
+ {
+
+ private:
+
+ /** The serial_link to which this port belongs. */
+ SerialLink& serial_link;
+
+ /**
+ * Master port on the other side of the serial_link.
+ */
+ SerialLinkMasterPort& masterPort;
+
+ /** Minimum request delay though this serial_link. */
+ const Cycles delay;
+
+ /** Address ranges to pass through the serial_link */
+ const AddrRangeList ranges;
+
+ /**
+ * Response packet queue. Response packets are held in this
+ * queue for a specified delay to model the processing delay
+ * of the serial_link. We use a deque as we need to iterate over
+ * the items for functional accesses.
+ */
+ std::deque<DeferredPacket> transmitList;
+
+ /** Counter to track the outstanding responses. */
+ unsigned int outstandingResponses;
+
+ /** If we should send a retry when space becomes available. */
+ bool retryReq;
+
+ /** Max queue size for reserved responses. */
+ unsigned int respQueueLimit;
+
+ /**
+ * Is this side blocked from accepting new response packets.
+ *
+ * @return true if the reserved space has reached the set limit
+ */
+ bool respQueueFull() const;
+
+ /**
+ * Handle send event, scheduled when the packet at the head of
+ * the response queue is ready to transmit (for timing
+ * accesses only).
+ */
+ void trySendTiming();
+
+ /** Send event for the response queue. */
+ EventWrapper<SerialLinkSlavePort,
+ &SerialLinkSlavePort::trySendTiming> sendEvent;
+
+ public:
+
+ /**
+ * Constructor for the SerialLinkSlavePort.
+ *
+ * @param _name the port name including the owner
+ * @param _serial_link the structural owner
+ * @param _masterPort the master port on the other side of the
+ * serial_link
+ * @param _delay the delay in cycles from receiving to sending
+ * @param _resp_limit the size of the response queue
+ * @param _ranges a number of address ranges to forward
+ */
+ SerialLinkSlavePort(const std::string& _name, SerialLink&
+ _serial_link, SerialLinkMasterPort& _masterPort,
+ Cycles _delay, int _resp_limit, const
+ std::vector<AddrRange>& _ranges);
+
+ /**
+ * Queue a response packet to be sent out later and also schedule
+ * a send if necessary.
+ *
+ * @param pkt a response to send out after a delay
+ * @param when tick when response packet should be sent
+ */
+ void schedTimingResp(PacketPtr pkt, Tick when);
+
+ /**
+ * Retry any stalled request that we have failed to accept at
+ * an earlier point in time. This call will do nothing if no
+ * request is waiting.
+ */
+ void retryStalledReq();
+
+ protected:
+
+ /** When receiving a timing request from the peer port,
+ pass it to the serial_link. */
+ bool recvTimingReq(PacketPtr pkt);
+
+ /** When receiving a retry request from the peer port,
+ pass it to the serial_link. */
+ void recvRespRetry();
+
+ /** When receiving a Atomic requestfrom the peer port,
+ pass it to the serial_link. */
+ Tick recvAtomic(PacketPtr pkt);
+
+ /** When receiving a Functional request from the peer port,
+ pass it to the serial_link. */
+ void recvFunctional(PacketPtr pkt);
+
+ /** When receiving a address range request the peer port,
+ pass it to the serial_link. */
+ AddrRangeList getAddrRanges() const;
+ };
+
+
+ /**
+ * Port on the side that forwards requests and receives
+ * responses. The master port has a buffer for the requests not
+ * yet sent.
+ */
+ class SerialLinkMasterPort : public MasterPort
+ {
+
+ private:
+
+ /** The serial_link to which this port belongs. */
+ SerialLink& serial_link;
+
+ /**
+ * The slave port on the other side of the serial_link.
+ */
+ SerialLinkSlavePort& slavePort;
+
+ /** Minimum delay though this serial_link. */
+ const Cycles delay;
+
+ /**
+ * Request packet queue. Request packets are held in this
+ * queue for a specified delay to model the processing delay
+ * of the serial_link. We use a deque as we need to iterate over
+ * the items for functional accesses.
+ */
+ std::deque<DeferredPacket> transmitList;
+
+ /** Max queue size for request packets */
+ const unsigned int reqQueueLimit;
+
+ /**
+ * Handle send event, scheduled when the packet at the head of
+ * the outbound queue is ready to transmit (for timing
+ * accesses only).
+ */
+ void trySendTiming();
+
+ /** Send event for the request queue. */
+ EventWrapper<SerialLinkMasterPort,
+ &SerialLinkMasterPort::trySendTiming> sendEvent;
+
+ public:
+
+ /**
+ * Constructor for the SerialLinkMasterPort.
+ *
+ * @param _name the port name including the owner
+ * @param _serial_link the structural owner
+ * @param _slavePort the slave port on the other side of the
+ * serial_link
+ * @param _delay the delay in cycles from receiving to sending
+ * @param _req_limit the size of the request queue
+ */
+ SerialLinkMasterPort(const std::string& _name, SerialLink&
+ _serial_link, SerialLinkSlavePort& _slavePort, Cycles
+ _delay, int _req_limit);
+
+ /**
+ * Is this side blocked from accepting new request packets.
+ *
+ * @return true if the occupied space has reached the set limit
+ */
+ bool reqQueueFull() const;
+
+ /**
+ * Queue a request packet to be sent out later and also schedule
+ * a send if necessary.
+ *
+ * @param pkt a request to send out after a delay
+ * @param when tick when response packet should be sent
+ */
+ void schedTimingReq(PacketPtr pkt, Tick when);
+
+ /**
+ * Check a functional request against the packets in our
+ * request queue.
+ *
+ * @param pkt packet to check against
+ *
+ * @return true if we find a match
+ */
+ bool checkFunctional(PacketPtr pkt);
+
+ protected:
+
+ /** When receiving a timing request from the peer port,
+ pass it to the serial_link. */
+ bool recvTimingResp(PacketPtr pkt);
+
+ /** When receiving a retry request from the peer port,
+ pass it to the serial_link. */
+ void recvReqRetry();
+ };
+
+ /** Slave port of the serial_link. */
+ SerialLinkSlavePort slavePort;
+
+ /** Master port of the serial_link. */
+ SerialLinkMasterPort masterPort;
+
+ /** Number of parallel lanes in this serial link */
+ unsigned num_lanes;
+
+ public:
+
+ virtual BaseMasterPort& getMasterPort(const std::string& if_name,
+ PortID idx = InvalidPortID);
+ virtual BaseSlavePort& getSlavePort(const std::string& if_name,
+ PortID idx = InvalidPortID);
+
+ virtual void init();
+
+ typedef SerialLinkParams Params;
+
+ SerialLink(SerialLinkParams *p);
+};
+
+#endif //__MEM_SERIAL_LINK_HH__